Civil society organisations participating in ISO TC 228 and ISO TC 229: the INTERNORM project and its future

This paper presents the first results of the INTERNORM pilot project funded by the University of Lausanne (2010 - 2014) to support the involvement of civil society organisations (CSO) in two ISO technical committees (TC), the ISO TC 228 on "tourism and related services" and the ISO TC 229 on "nanotechnologies". It analyses how a distinct participatory mechanism can influence the institutional environment of technical diplomacy in which standards are shaped. The project is an attempt to respond to the democratic deficit attested in the field of international standardisation, formally open to civil society participation, but still largely dominated by expert knowledge and market players. Many international standards have direct implications on society as a whole, but CSOs (consumers and environmental associations, trade unions) are largely under-represented in negotiation arenas. The paper draws upon international relations literature on new institutional forms in global governance and studies of participation in science and technology to address three questions: to which extent do CSOs identify participation in standardisation as worth of their mobilisation? How is the pluralisation of knowledge and expertise supporting CSO position during the deliberation? To which extent can CSO access and influence standardisation beyond their consultative role? It argues that there are significant limitations to the rise of civil society participation in such global governance mechanisms. Despite high entry costs into technical diplomacy, participation is not so much a matter of upstream engagement, or of procedure and resources only, than of opportunistic CSOs mobilization, of distinct thematic incentives and concrete outcomes to be expected in standardisation arenas or in the broader use of international standards.

Outcome after proximal femoral fractures during primary total hip replacement by the direct anterior approach.

BACKGROUND: The literature suggests that intraoperative fractures of the greater trochanter and the metaphysis are increased with uncemented stems and the direct anterior approach. This study aims to determine the incidence and assess the functional and radiological outcome after such fractures. METHODS: 484 consecutive total hip replacements (THR) (64 ± 12 years) were analyzed. We treated trochanteric fractures conservatively without any further denuding, and secured metaphyseal fissures with cerclages. Postoperative X-rays and at the latest follow-up were compared to assess secondary fracture displacement and stem subsidence. Western Ontario and McMaster Universities Arthritis Index (WOMAC) scores after 1 year were analyzed. For each patient sustaining a fracture, two patients without fractures were matched in terms of age, body mass index and gender. RESULTS: 13 (2.7 %, 5 male, 68 ± 9 years) patients with intraoperative fractures of the greater trochanter (n = 8) or the metaphysis (n = 5) were analyzed. Consolidation was observed in 7/8 patients sustaining a trochanteric fracture while secondary displacement of the fragment occurred in one case. Stem subsidence was observed in 2/5 cases (5 and 7 mm). Patients who sustained a fracture showed a trend towards poorer WOMAC scores at 1 year postoperatively, compared to patients without fractures. A significantly increased joint stiffness was also observed. CONCLUSION: The intraoperative fracture risk in this series of THR through a direct anterior approach was 2.7 %. Trochanteric fractures do heal without primary fixation. Metaphyseal fractures heal well if immediately stabilized with a cerclage.

Hankekustannusten laskentamallit EU:n 7. puiteohjelmassa

Tutkielma on luonteeltaan deskriptiivinen kirjallisuuskatsaus, jossa pyritään määrittämään puiteohjelmahankkeiden EU-rahoitusmallit ja kuinka niitä tullaan soveltamaan käytännössä. Työn tarkoituksena on ymmärtää ja kuvata EU:n tutkimus- ja kehitysrahoitusta koskevan 7. puiteohjelman hankekustannusten korvausperiaatteet. Tavoitteena on laatia malli ja esimerkkejä oman kustannusosuuden laskemiseksi hankkeessa. Tutkimustulosten perusteella 7. puiteohjelmassa on tärkeää kustannusten suora kohdentaminen hankkeelle, sillä suoraan kohdennettavien välittömien ja välillisten kustannusten korvausosuus on yleensä selvästi korkeampi kuin kiinteitä korvausosuuksia tai kiinteää kokonaissummaa käytettäessä. Kustannusten raportointi edellyttääkin tarkkaa kirjanpitoa, jonka avulla myös tulevien hankkeiden budjetointi on tarkempaaja helpompaa.

The direct effects of tacrolimus and cyclosporin A on isolated human islets: A functional, survival and gene expression study.

The use of immunosuppressive drugs in transplanted patients is associated with the development of diabetes, possibly due to β-cell toxicity. To better understand the mechanisms leading to post-transplant diabetes, we investigated the actions of prolonged exposure of isolated human islets to therapeutical levels of tacrolimus (Tac) or cyclosporin A (CsA). Islets were isolated from the pancreas of multiorgan donors by enzymatic digestion and density gradient centrifugation. Functional, survival and molecular studies were then performed after 4 days of incubation with therapeutical concentrations of Tac or  CsA. Glucose-induced insulin secretion was significantly decreased in Tac, but not in CsA exposed islets, which was associated with a reduction of the amount of insulin granules as shown by electron microscopy. The percentage of apoptotic β-cells was higher in Tac than CsA exposed islets. Microarray experiments followed by Gene Set Enrichment Analysis revealed that gene expression was more markedly affected upon Tac treatment. In conclusion, Tac and CsA affect features of beta-cell differently, with several changes occurring at the molecular level.

Investointi- ja leasinglaskelmien merkitys yritysajoneuvojen hallinnoinnin eri vaihtoehdoissa

Tutkielman aiheena on erilaisten kustannuslaskentamenetelmien vertailu ja niiden käytön merkitys yrityksien ajoneuvoinvestoinneissa. Tutkielmassa selvitetään, mikä osuus leasinglaskelmilla ja investointilaskelmilla on case-yrityksien ajoneuvohankintojen suunnittelussa ja päätöksenteossa. Samalla tarkastellaan case-yrityksien käytössä olevien laskentamenetelmien ominaisuuksia ja uuden IFRS -tilinpäätösmallin mahdollisia vaikutuksia ajoneuvoinvestointeihin. Tutkimus on toiminta-analyyttinen ja samalla kvalitatiivinen eli laadullinen tutkimus. Tutkimusmenettelynä on käytetty teoriaa sekä haastatteluja. Tutkimuksen tuloksien mukaan case-yrityksissä ajoneuvohankintojen yhteydessä leasingyhtiöiden tekemillä kustannuslaskelmilla on selvästi suurempi osuus kuin yrityksen itse tekemillä investointilaskelmilla. Leasingyhtiöiden laskenta-ajanjakso ei ole sama kuin yrityksien omistamien ajoneuvojen taloudellinen pitoaika. Tämä ero ohjaa yrityksiä käyttämään omia kustannuslaskentamenetelmiä ja tarjoaa mahdollisuuden myös muille perusteille päätettäessä yrityksen ajoneuvojen omistus- ja hallinnointimuodoista.

Altruism, spite and choosy females

Natural selection favours the genes which are able to introduce replicates of themselves in the next generation with higher certainty than do rival genes (Hamilton 1963). The fitness of an individual, it?s ability to produce future parents, depends on it?s own behaviour as well as on the behaviour of other individuals in the population. For instance, the intensity of competition an individual experience depends on the exploitation of resources by neighbours. The fitness is thus frequency dependent on what neighbours do. Behaviours can be classified according to the costs and benefits they have on the fitness of the behaver and it?s neighbours (Hamilton 1964, Hamilton 1975). According to this classification there exist four distinct social behaviours. (1) A gene confering the ability to use a new ressource is called selfish because it has a positive e_ect on the bearer of the gene but a negative e_ect on neighbours by the concomitant increase in competition. (2) An altruistic behaviour is defined as an action where an individual increases the fitness of a neighbour at the expense of it?s own. The e_ect is deleterious for the actor but positive for the receptor. (3) More surprinsingly, an individual might sacrifice a fraction of it?s ressources to harm another at no direct benefits. This spitefull behaviour incurs a cost for the actor but is also deleterious for the receptor. (4) Finally a cooperative behaviour breeds benefits for both actors and neighbours. In this thesis I will continue on the path traced by numerous evolutionnary biologist which attempt to fine tune our understanding of the evolution of social behaviours since Hamilton?s foundation (1963, 1964). A critical development over the last 40 years has been the realisation that competition between kin can partly or completely cancel out the role of relatedness as an agent favouring altruism (Wilson et al., 1992; Taylor, 1992a,b). Of importance is thus to determine the scale at which competition and altruism occur. One mechanism avoiding the complete dilution of relatedness by competition is the conditionnal expression of the social behaviors. Focus will be given in this thesis at the role played by di_erent recognition mechanism in paving the way to altruism (Komdeur and Hatchwell, 1999) when the population has a spatial structure. Further, the evolution of spite will also be considered in these settings. The thesis is fractionated into two parts. First, di_erent models promoting altruism cooperation and spite will be compared under the same theoretical umbrella. This is a rather informal and more personnal part of my thesis. It also serve as a justification and basis to "Altruism among kin and non-kin individuals" which is an article attempting to clas- sify the mechanisms leading to altruism and cooperation. Second, in the annexe, there are three research papers about kin selection, altruism and dispersal: "Is sociality driven by the costs of dispersal or the benefits of philopatry?: A role for kin-discrimination mechanism", "Altruism, dispersal and phenotype kin recognition" and "Inbreeding avoidance through kin recognition: choosy female boost male dispersal" this last paper incorporates kin recognition as an agent favoring sex-biased dispersal.

Cost information in engineering design -Potentials and limitations of activity-based costing

The purpose of this thesis is to analyse activity-based costing (ABC) and possible modified versions ofit in engineering design context. The design engineers need cost information attheir decision-making level and the cost information should also have a strong future orientation. These demands are high because traditional management accounting has concentrated on the direct actual costs of the products. However, cost accounting has progressed as ABC was introduced late 1980s and adopted widely bycompanies in the 1990s. The ABC has been a success, but it has gained also criticism. In some cases the ambitious ABC systems have become too complex to build,use and update. This study can be called an action-oriented case study with some normative features. In this thesis theoretical concepts are assessed and allowed to unfold gradually through interaction with data from three cases. The theoretical starting points are ABC and theory of engineering design process (chapter2). Concepts and research results from these theoretical approaches are summarized in two hypotheses (chapter 2.3). The hypotheses are analysed with two cases (chapter 3). After the two case analyses, the ABC part is extended to cover alsoother modern cost accounting methods, e.g. process costing and feature costing (chapter 4.1). The ideas from this second theoretical part are operationalized with the third case (chapter 4.2). The knowledge from the theory and three cases is summarized in the created framework (chapter 4.3). With the created frameworkit is possible to analyse ABC and its modifications in the engineering design context. The framework collects the factors that guide the choice of the costing method to be used in engineering design. It also illuminates the contents of various ABC-related costing methods. However, the framework needs to be further tested. On the basis of the three cases it can be said that ABC should be used cautiously when formulating cost information for engineering design. It is suitable when the manufacturing can be considered simple, or when the design engineers are not cost conscious, and in the beginning of the design process when doing adaptive or variant design. If the design engineers need cost information for the embodiment or detailed design, or if manufacturing can be considered complex, or when design engineers are cost conscious, the ABC has to be always evaluated critically.

Permanent magnet synchronous motor for industrial inverter applications - analysis and design

During the latest few years the need for new motor types has grown, since both high efficiency and an accurate dynamic performance are demanded in industrial applications. For this reason, new effective control systems such as direct torque control (DTC) have been developed. Permanent magnet synchronous motors (PMSM) are well suitable for new adjustable speed AC inverter drives, because their efficiency and power factor are not depending on the pole pair number and speed to the same extent as it is the case in induction motors. Therefore, an induction motor (IM) with a mechanical gearbox can often be replaced with a direct PM motor drive. Space as well as costs will be saved, because the efficiency increases and the cost of maintenance decreases as well. This thesis deals with design criterion, analytical calculation and analysis of the permanent magnet synchronous motor for both sinusoidal air-gap flux density and rectangular air-gapflux density. It is examined how the air-gap flux, flux densities, inductances and torque can be estimated analytically for salient pole and non-salient pole motors. It has been sought by means of analytical calculations for the ultimate construction for machines rotating at relative low 300 rpm to 600 rpm speeds, which are suitable speeds e.g. in Pulp&Paper industry. The calculations are verified by using Finite Element calculations and by measuring of prototype motor. The prototype motor is a 45 kW, 600 rpm PMSM with buried V-magnets, which is a very appropriate construction for high torque motors with a high performance. With the purposebuilt prototype machine it is possible not only to verify the analytical calculations but also to show whether the 600 rpm PMSM can replace the 1500 rpm IM with a gear. It can also be tested if the outer dimensions of the PMSM may be the same as for the IM and if the PMSM in this case can produce a 2.5 fold torque, in consequence of which it may be possible to achieve the same power. The thesis also considers the question how to design a permanent magnet synchronous motor for relatively low speed applications that require a high motor torqueand efficiency as well as bearable costs of permanent magnet materials. It is shown how a selection of different parameters affects the motor properties. Key words: Permanent magnet synchronous motor, PMSM, surface magnets, buried magnets

Procurement in Project Implementation

Tutkimus keskittyy hankintatoimen kehittämiseen osana laitosprojektien toteutusta. Työ pohjautuu empiiriseltä taustaltaan Pöyry Oyj:n projektiliiketoimintaan ja työn tarkastelunäkökulmaksi onvalittu projektihallinnosta vastaavan yrityksen näkökulma. Tutkimus on hyvin käytännönläheinen ¿ se lähtee hankinnan ja sen seurannan ongelmista ja pyrkii tarjoamaan niihin uudenlaisia ratkaisuja. Pohjimmiltaan tutkimus kuuluu teollisuustalouden piiriin, vaikka tietojärjestelmätieteellä on vahva tukirooli. Työn tavoitteet ja tulokset liittyvät teollisuustaloudelle ominaisesti yrityksen toiminnan kehittämiseen, käytetyt välineet ja ratkaisut puolestaan hyödyntävät tietojärjestelmätieteen antamia mahdollisuuksia. Tutkimuksessa on käytetty konstruktiivista tutkimusotetta, jonka mukaisesti on luotu innovatiivisia konstruktioita ratkaisemaan aitoja reaalimaailman ongelmia ja tätä kautta tuotettu kontribuutioita teollisuustaloudelle. Tavoitteena oli järjestää hankintatoimi ja sen seuranta suurissa laitosprojekteissa tehokkaammin. Tätä varten uudistettiin ensin projektihallinnon ja hankintatoimen toimintaohjeet vastaamaan paremmin nykyajan vaatimuksia. Toimintaohjeiden perusteella ryhdyttiin toteuttamaan hankintaohjelmistoa, joka pystyisi kattamaan kaikki toimintaohjeissa kuvatut piirteet. Lopulta hankintaohjelmisto toi mukanaan uusia piirteitä projektihallintoon ja hankintatoimeen ja nämä sisällytettiin toimintaohjeisiin. Tähän kehitystyöhön ryhdyttiin, jotta laitosprojektien projektihallinto ja hankintatoimi toimisivat paremmin, eli pienemmin kustannuksin tuottaen projekteissa tarvittavat tulokset nopeammin, tarkemmin ja laadukkaammin. Tutkimuksella on kolmenlaisia tuloksia: hankintatoimen parannetut metodit, hankintaohjelmiston pohjana olevat toiminta- ja laskentamallit sekä implementaationa hankintasovellus. Uudistetut projekti- ja hankintaohjeet kuvaavat hankintatoiminnan parannettuja metodeja. Hankintaohjelmistoasuunnitellessa ja kehitettäessä tehdyt kuvaukset sisältävät uusia malleja niin hankintaprosessille kuin hankinnan seuraamiseksi suurissa laitosprojekteissa. Itse ohjelmisto on tuloksena implementaatio, joka perustuu parannettuihin hankintametodeihin ja uusiin toiminta- ja laskentamalleihin. Uudistetut projekti- ja hankintaohjeet ovat olleet käytössä Pöyry Oyj:ssä vuodesta 1991. Vuosien varrella nämä toimintaohjeet ovat auttaneet ja tukeneet satojen laitosprojektientoteutusta ja ylläpitäneet Pöyry Oyj:n kilpailukykyä kansainvälisenä projektitalona. Hankintasovellus puolestaan on ollut käytössä useissa projekteissa ja sen on havaittu pienentävän hankintatoimen suoria työkustannuksia laitosprojekteissa. Sovelluksen katsotaan myös tuovan epäsuoria kustannussäästöjä parempien hankintapäätösten muodossa, mutta näiden säästöjen suuruutta ei pystytä luotettavasti arvioimaan.

Direct torque control of permanent magnet synchronous machines - analysis and implementation

Thedirect torque control (DTC) has become an accepted vector control method besidethe current vector control. The DTC was first applied to asynchronous machines,and has later been applied also to synchronous machines. This thesis analyses the application of the DTC to permanent magnet synchronous machines (PMSM). In order to take the full advantage of the DTC, the PMSM has to be properly dimensioned. Therefore the effect of the motor parameters is analysed taking the control principle into account. Based on the analysis, a parameter selection procedure is presented. The analysis and the selection procedure utilize nonlinear optimization methods. The key element of a direct torque controlled drive is the estimation of the stator flux linkage. Different estimation methods - a combination of current and voltage models and improved integration methods - are analysed. The effect of an incorrect measured rotor angle in the current model is analysed andan error detection and compensation method is presented. The dynamic performance of an earlier presented sensorless flux estimation method is made better by improving the dynamic performance of the low-pass filter used and by adapting the correction of the flux linkage to torque changes. A method for the estimation ofthe initial angle of the rotor is presented. The method is based on measuring the inductance of the machine in several directions and fitting the measurements into a model. The model is nonlinear with respect to the rotor angle and therefore a nonlinear least squares optimization method is needed in the procedure. A commonly used current vector control scheme is the minimum current control. In the DTC the stator flux linkage reference is usually kept constant. Achieving the minimum current requires the control of the reference. An on-line method to perform the minimization of the current by controlling the stator flux linkage reference is presented. Also, the control of the reference above the base speed is considered. A new estimation flux linkage is introduced for the estimation of the parameters of the machine model. In order to utilize the flux linkage estimates in off-line parameter estimation, the integration methods are improved. An adaptive correction is used in the same way as in the estimation of the controller stator flux linkage. The presented parameter estimation methods are then used in aself-commissioning scheme. The proposed methods are tested with a laboratory drive, which consists of a commercial inverter hardware with a modified software and several prototype PMSMs.

Minimization of biosynthetic costs in adaptive gene expression responses of yeast to environmental changes

Yeast successfully adapts to an environmental stress by altering physiology and fine-tuning metabolism. This fine-tuning is achieved through regulation of both gene expression and protein activity, and it is shaped by various physiological requirements. Such requirements impose a sustained evolutionary pressure that ultimately selects a specific gene expression profile, generating a suitable adaptive response to each environmental change. Although some of the requirements are stress specific, it is likely that others are common to various situations. We hypothesize that an evolutionary pressure for minimizing biosynthetic costs might have left signatures in the physicochemical properties of proteins whose gene expression is fine-tuned during adaptive responses. To test this hypothesis we analyze existing yeast transcriptomic data for such responses and investigate how several properties of proteins correlate to changes in gene expression. Our results reveal signatures that are consistent with a selective pressure for economy in protein synthesis during adaptive response of yeast to various types of stress. These signatures differentiate two groups of adaptive responses with respect to how cells manage expenditure in protein biosynthesis. In one group, significant trends towards downregulation of large proteins and upregulation of small ones are observed. In the other group we find no such trends. These results are consistent with resource limitation being important in the evolution of the first group of stress responses.

Personality and job stress: a comparison of direct effects on parenting

The impact of personality and job characteristics on parental rearing styles was compared in 353 employees. Hypotheses concerning the relationships between personality and job variables were formulated in accordance with findings in past research and the Belsky’s model (1984). Structural equation nested models showed that Aggression-hostility, Sociability and job Demand were predictive of Rejection and Emotional Warmth parenting styles, providing support for some of the hypothesized relationships. The findings suggest a well-balanced association of personality variables with both parenting styles: Aggression-Hostility was positively related to Rejection and negatively to Emotional Warmth, whereas Sociability was positively related to Emotional Warmth and negatively related to Rejection. Personality dimensions explained a higher amount of variance in observed parenting styles. However, a model that considered both, personality and job dimensions as antecedent variables of parenting was the best representation of observed data, as both systems play a role in the prediction of parenting behavior.

Persistence of Transmitted HIV-1 Drug Resistance Mutations Associated with Fitness Costs and Viral Genetic Backgrounds.

Transmission of drug-resistant pathogens presents an almost-universal challenge for fighting infectious diseases. Transmitted drug resistance mutations (TDRM) can persist in the absence of drugs for considerable time. It is generally believed that differential TDRM-persistence is caused, at least partially, by variations in TDRM-fitness-costs. However, in vivo epidemiological evidence for the impact of fitness costs on TDRM-persistence is rare. Here, we studied the persistence of TDRM in HIV-1 using longitudinally-sampled nucleotide sequences from the Swiss-HIV-Cohort-Study (SHCS). All treatment-naïve individuals with TDRM at baseline were included. Persistence of TDRM was quantified via reversion rates (RR) determined with interval-censored survival models. Fitness costs of TDRM were estimated in the genetic background in which they occurred using a previously published and validated machine-learning algorithm (based on in vitro replicative capacities) and were included in the survival models as explanatory variables. In 857 sequential samples from 168 treatment-naïve patients, 17 TDRM were analyzed. RR varied substantially and ranged from 174.0/100-person-years;CI=[51.4, 588.8] (for 184V) to 2.7/100-person-years;[0.7, 10.9] (for 215D). RR increased significantly with fitness cost (increase by 1.6[1.3,2.0] per standard deviation of fitness costs). When subdividing fitness costs into the average fitness cost of a given mutation and the deviation from the average fitness cost of a mutation in a given genetic background, we found that both components were significantly associated with reversion-rates. Our results show that the substantial variations of TDRM persistence in the absence of drugs are associated with fitness-cost differences both among mutations and among different genetic backgrounds for the same mutation.

Tasasähkönjakelun käyttöpotentiaalin määrittäminen

Sähkönjakeluverkkojen kehittäminen nykyistä käyttövarmemmiksi ja taloudellisemmiksi vaatii jatkuvasti uusia ratkaisumalleja. Lupaavaksi tekniikaksi sähkönjakeluverkkojen kehittämisessä on osoittautumassa tasasähkönjakelu tehoelektronisten komponenttien kehittyessä ja hintojen laskiessa samanaikaisesti. Pienjännitedirektiivi mahdollistaa tasajännitteen myötä aiempaa suurempien jännitteiden käytön pienjänniteverkoissa. Tasajännitteen käytöllä voidaan saavuttaa etuja mm. tehonsiirtokyvyssä, sähkönlaadussa, käyttövarmuudessa sekä kustannuksissa. Työssä tehdään yksityiskohtaisia teknistaloudellisia tarkasteluja perinteistä 20/0,4 kV tekniikkaa, 1000 V sähkönjakelua sekä tasasähköjärjestelmiä hyödyntäen ja verrataan näiden järjestelmien kustannuksia ja ominaisuuksia toisiinsa. Tutkimusalueet on valittu Fortum Sähkönsiirto Oy:n maaseutu- ja taajamaverkoista. Työssä pyritään hahmotta-maan teknistaloudellista käyttöaluetta eri tasasähkönjakelujärjestelmille sekä määrittä-mään tasasähkönjakelun käyttöpotentiaali tutkimuskohteena olleissa verkoissa. Lisäksi tutkitaan eri tekijöiden vaikutuksia tasasähköjakelun kannattavuuteen ja käyttövarmuu-teen sekä pyritään tuomaan esiin muitakin tasasähkönjakelujärjestelmien ominaisuuksia.