Nidek OPD-scan analysis of normal, keratoconic, and penetrating keratoplasty eyes

PURPOSE: To determine by wavefront analysis the difference between eyes considered normal, eyes diagnosed with keratoconus, and eyes that have undergone penetrating keratoplasty METHODS: The Nidek OPD-Scan wavefront aberrometer was used to measure ocular aberrations out to the sixth Zernike order. One hundred and thirty eyes that were free of ocular pathology, 41 eyes diagnosed with keratoconus, and 8 eyes that had undergone penetrating keratoplasty were compared for differences in root mean square value. Three and five millimeter root mean square values of the refractive power aberrometry maps of the three classes of eyes were compared. Radially symmetric and irregular higher order aberration values were compared for differences in magnitude. RESULTS: Root mean square values were lower in eyes free of ocular pathology compared to eyes with keratoconus and eyes that had undergone penetrating keratoplasty. The aberrations were larger with the 5-mm pupil. Coma and spherical aberration values were lower in normal eyes. CONCLUSION: Wavefront aberrometry of normal, pathological, and eyes after surgery may help to explain the visual distortions encountered by patients. The ability to measure highly aberrated eyes allows an objective assessment of the optical consequences of ocular pathology and surgery. The Nidek OPD-Scan can be used in areas other than refractive surgery.

Financial consequences of one-stop dispensing at Birmingham Children's Hospital

Poster session - Costs for one stop dispensing and the use of patients’ own drugs (PODs) were compared with traditional dispensing costs - It was found that operating a one-stop dispensing scheme, with the use of PODs where applicable, could save an average of £4.35 per patient per day on ward A and £5.19 per patient per day on ward B - These saving would equate to annual savings of £24,000 on ward A and £34,000 on ward B - Additional savings can be made to the secondary care budget as no in-patient drugs would be wasted upon patient discharge - These additional savings are an average £25.19 per patient on ward A and £13.42 per patient on ward B

A simulation analysis of spoke-terminals operating in LTL Hub-and-Spoke freight distribution systems

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT The research presented in this thesis is concerned with Discrete-Event Simulation (DES) modelling as a method to facilitate logistical policy development within the UK Less-than-Truckload (LTL) freight distribution sector which has been typified by “Pallet Networks” operating on a hub-and-spoke philosophy. Current literature relating to LTL hub-and-spoke and cross-dock freight distribution systems traditionally examines a variety of network and hub design configurations. Each is consistent with classical notions of creating process efficiency, improving productivity, reducing costs and generally creating economies of scale through notions of bulk optimisation. Whilst there is a growing abundance of papers discussing both the network design and hub operational components mentioned above, there is a shortcoming in the overall analysis when it comes to discussing the “spoke-terminal” of hub-and-spoke freight distribution systems and their capabilities for handling the diverse and discrete customer profiles of freight that multi-user LTL hub-and-spoke networks typically handle over the “last-mile” of the delivery, in particular, a mix of retail and non-retail customers. A simulation study is undertaken to investigate the impact on operational performance when the current combined spoke-terminal delivery tours are separated by ‘profile-type’ (i.e. retail or nonretail). The results indicate that a potential improvement in delivery performance can be made by separating retail and non-retail delivery runs at the spoke-terminal and that dedicated retail and non-retail delivery tours could be adopted in order to improve customer delivery requirements and adapt hub-deployed policies. The study also leverages key operator experiences to highlight the main practical implementation challenges when integrating the observed simulation results into the real-world. The study concludes that DES be harnessed as an enabling device to develop a ‘guide policy’. This policy needs to be flexible and should be applied in stages, taking into account the growing retail-exposure.

Transaction cost analysis

Transaction cost theory is one of the most widely used theories in marketing, management, and economics. The focus of the theory is on explaining how firms organize transactions. The rules by which transactions are organized is called governance. A wide variety of strategic decisions of firms, such as outsourcing, the mode of organizing exports, the use of crowdsourcing, or partner selection efforts, can be analyzed and understood using transaction cost theory. The basic argument of transaction cost theory is that firms economize on costs by choosing a form of governance that minimizes production and transaction costs. We discuss the origins and uses of the theory, critical variables, assumptions, and limitations.

Making a difference:critical linguistic analysis in a legal context

One of the major problems for Critical Discourse Analysts is how to move on from their insightful critical analyses to successfully 'acting on the world in order to transform it'. This paper discusses, with detailed exemplification, some of the areas where linguists have moved beyond description to acting on and changing the world. Examples from three murder trials show how essential it is, in order to protect the rights of witnesses and defendants, to have audio records of significant interviews with police officers. The article moves on to discuss the potentially serious consequences of the many communicative problems inherent in legal/lay interaction and illustrates a few of the linguist-led improvements to important texts. Finally, the article turns to the problems of using linguistic data to try to determine the geographical origin of asylum seekers. The intention of the article is to act as a call to arms to linguists; it concludes with the observation that 'innumerable mountains remain for those with a critical linguistic perspective who would like to try to move one'. © 2011 John Benjamins Publishing Company.

Identifying PV module mismatch faults by a thermography-based temperature distribution analysis

Photovoltaic (PV) solar power generation is proven to be effective and sustainable but is currently hampered by relatively high costs and low conversion efficiency. This paper addresses both issues by presenting a low-cost and efficient temperature distribution analysis for identifying PV module mismatch faults by thermography. Mismatch faults reduce the power output and cause potential damage to PV cells. This paper first defines three fault categories in terms of fault levels, which lead to different terminal characteristics of the PV modules. The investigation of three faults is also conducted analytically and experimentally, and maintenance suggestions are also provided for different fault types. The proposed methodology is developed to combine the electrical and thermal characteristics of PV cells subjected to different fault mechanisms through simulation and experimental tests. Furthermore, the fault diagnosis method can be incorporated into the maximum power point tracking schemes to shift the operating point of the PV string. The developed technology has improved over the existing ones in locating the faulty cell by a thermal camera, providing a remedial measure, and maximizing the power output under faulty conditions.

Conclusion : on multiple levels of analysis, context, contingency and capital

In this concluding chapter, we bring together the threads and reflections on the chapters contained in this text and show how they relate to multi-level issues. The book has focused on the world of Human Resource Management (HRM) and the systems and practices it must put in place to foster innovation. Many of the contributions argue that in order to bring innovation about, organisations have to think carefully about the way in which they will integrate what is, in practice, organisationally relevant — but socially distributed — knowledge. They need to build a series of knowledge-intensive activities and networks, both within their own boundaries and across other important external inter-relationships. In so doing, they help to co-ordinate important information structures. They have, in effect, to find ways of enabling people to collaborate with each other at lower cost, by reducing both the costs of their co-ordination and the levels of unproductive search activity. They have to engineer these behaviours by reducing the risks for people that might be associated with incorrect ideas and help individuals, teams and business units to advance incomplete ideas that are so often difficult to codify. In short, a range of intangible assets must flow more rapidly throughout the organisation and an appropriate balance must be found between the rewards and incentives associated with creativity, novelty and innovation, versus the risks that innovation may also bring.

Institutions matter: essays on the determinants and consequences of socio-political institutions

ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY WITH PRIOR ARRANGEMENT This thesis seeks to contribute to the socio-political literature. It comprises of three individual chapters examining the determinants and consequences of different social-political institutional factors. Specifically, the first study combines game theoretical and empirical techniques to examine how bureaucrats favour other agents within their social group and the effects this will have on the level of corruption in the economy. To this end, I develop a simple model of allocation of time between economic activities and leisure (time spent building social network ties), to illustrate the underlying causal mechanism between social network and corruption. It shows that large social networks and low levels of economic activities provides the condition for high levels of corruption. However, the ability of the government to punish corruption through well-established laws and property rights enforcement acts as a deterrent to corruption. he second work also combines game theoretical and empirical techniques. It aims to clarify the relationship between the degree of competition and political influence of firms, paying particular attention to the level of government regulations that exist in the countries in which the firms operates. The interplay between economic and political institutions is vital to any analysis on understanding the workings of political influence. The third study is purely empirical. It examines the role of two types of business network, namely, political connections and business group affiliations on a firm’s performance. Evidence was provided on Chinese firms’ performance during the 2008 financial crisis.

Cooperation in supply chains: A cooperative game theoretic analysis = Együttműködés ellátási láncokban: Egy kooperatív játékelméleti elemzés

A cikkben a kooperatív játékelmélet fogalmait alkalmazzuk egy ellátási lánc esetében. Az ostorcsapás-hatás elemeit egy beszállító-termelő ellátási láncban ragadjuk meg egy Arrow-Karlin típusú modellben lineáris készletezési és konvex termelési költség mellett. Feltételezzük, hogy mindkét vállalat minimalizálja a fontosabb költségeit. Két működési rendszert hasonlítunk össze: egy hierarchikus döntéshozatali rendszert, amikor először a termelő, majd a beszállító optimalizálja helyzetét, majd egy centralizált (kooperatív) modellt, amikor a vállalatok az együttes költségüket minimalizálják. A kérdés úgy merül fel, hogy a csökkentett ostorcsapás-hatás esetén hogyan osszák meg a részvevők ebben a transzferálható hasznosságú kooperatív játékban. = In this paper we apply cooperative game theory concepts to analyze supply chains. The bullwhip effect in a two-stage supply chain (supplier-manufacturer) in the framework of the Arrow-Karlin model with linear-convex cost functions is considered. It is assumed that both firms minimize their relevant costs, and two cases are examined: the supplier and the manufacturer minimize their relevant costs in a decentralized and in a centralized (cooperative) way. The question of how to share the savings of the decreased bullwhip effect in the centralized (cooperative) model is answered by transferable utility cooperative game theory tools.

Analysis of purchasing activity with discounted cash flow inventory models = Beszerzési tevékenység elemzése diszkontált pénzáramlású készletmodellel

A klasszikus tételnagyság probléma két fontosabb készletezési költséget ragad meg: rendelési és készlettartási költségek. Ebben a dolgozatban a vállalatok készpénz áramlásának a beszerzési tevékenységre gyakorolt hatását vizsgáljuk. Ebben az elemzésben a készpénzáramlási egyenlőséget használjuk, amely nagyban emlékeztet a készletegyenletekre. Eljárásunkban a beszerzési és rendelési folyamatot diszkontálva vizsgáljuk. A költségfüggvény lineáris készpénztartási, a pénzkiadás haszonlehetőség és lineáris kamatköltségből áll. Bemutatjuk a vizsgált modell optimális megoldását. Az optimális megoldást egy számpéldával illusztráljuk. = The classical economic order quantity model has two types of costs: ordering and inventory holding costs. In this paper we try to investigate the effect of purchasing activity on cash flow of a firm. In the examinations we use a cash flow identity similar to that of in inventory modeling. In our approach we analyze the purchasing and ordering process with discounted costs. The cost function of the model consists of linear cash holding, linear opportunity cost of spending cash, and linear interest costs. We show the optimal solution of the proposed model. The optimal solutions will be presented by numerical examples.

The analysis of bullwhip effect in a HMMS-type supply chain

The aim of the paper is to investigate the well-known bullwhip effect of supply chains. Control theoretic analysis of bullwhip effect is extensively analyzed in the literature with the Laplace transform. This paper tries to examine the effect for an extended Holt–Modigliani–Muth–Simon model. A two-stage supply chain (supplier–manufacturer) is studied with quadratic costs functional. It is assumed that both firms minimize the relevant costs. The order of the manufacturer is delayed with a known constant. Two cases are examined: supplier and manufacturer minimize the relevant costs decentralized, and a centralized decision rule. The question is answered, how to decrease the bullwhip effect.

The analysis of bullwhip effect in a HMMS-type supply chain

The aim of the paper is to investigate the well-known bullwhip effect of supply chains. Control theoretic analysis of bullwhip effect is extensively analyzed in the literature with Laplace transform. This paper tries to examine the effect for an extended Holt-Modigliani-Muth-Simon model. A two-stage supply chain (supplier-manufacturer) is studied with quadratic costs functional. It is assumed that both firms minimize the relevant costs. The order of the manufacturer is delayed with a known constant. Two cases are examined: supplier and manufacturer minimize the relevant costs decentralized, and a centralized decision rule. The question is answered, how to decrease the bullwhip effect.

Costs and Benefits of Stem Cell Research and Treatment: Media Presentation and Audience Understanding in Hungary

This study examined the press coverage and audience understanding of the costs and benefits of stem cell research/treatment in Hungary. A content analysis of five newspapers and a focus group study was conducted. The way participants talked about the costs and benefits in many aspects echoed the dominant framing of the issue in the press (medical benefits = main benefit, high expense of treatment = dominant negative aspect). Even though participants applied analogical reasoning to formulate some risks that were missing from the reporting on stem cells, many gaps of the media coverage were echoed in gaps in lay discussions.

Cost-benefit analysis of climate change – A methodological overview of recent studies

Global warming16 has already begun. Climate change has become a self-propelling and self-reinforcing process as a result of the externality associated with greenhouse- gas (GHG) emissions. Although it is an externality related to humankind, according to a number of unique features we should distinguish it from other externalities. Climate change is a global phenomenon in its causes and consequences. The long-term and persistent impacts of climate change will likely continue over centuries without further anthropogenic mechanism. The preindustrial (equilibrium) level of GHG concentration in the atmosphere cannot be restored since it is irreversible, but if we do not stabilise the actual level of atmospheric concentration, the situation will become much worse than it is now. Assessing the impacts of climate change requires careful considerations because of the pervasive uncertainties and risks associated with it.

Cost-Benefit Analysis of Climate Change (a Methodological Overview of Recent Studies)

This paper examines the methodological aspect of climate change, particularly the aggregation of costs and benefits induced by climate change on individuals, societies, economies and on the whole ecosystem. Assessing the total and/or marginal costs of environmental change is difficult because of wide range of factors that have to be involved. The subsequent study tries to capture the complexity of cost assessment on climate change therefore includes several critical factors such as scenarios and modeling, valuation and estimation, equity and discounting.