Cost and time control of construction project: inhibiting factors and mitigating measures in practice

Despite the availability of various control techniques and project control software many construction projects still do not achieve their cost and time objectives. Research in this area so far has mainly been devoted to identifying causes of cost and time overruns. There is limited research geared towards studying factors inhibiting the ability of practitioners to effectively control their projects. To fill this gap, a survey was conducted on 250 construction project organizations in the UK, which was followed by face-to-face interviews with experienced practitioners from 15 of these organizations. The common factors that inhibit both time and cost control during construction projects were first identified. Subsequently 90 mitigating measures have been developed for the top five leading inhibiting factors—design changes, risks/uncertainties, inaccurate evaluation of project time/duration, complexities and non-performance of subcontractors were recommended. These mitigating measures were classified as: preventive, predictive, corrective and organizational measures. They can be used as a checklist of good practice and help project managers to improve the effectiveness of control of their projects.

Cost-effective upgrade of WDM all-optical networks using overlay fibres and hop reduction links

Fibre overlay is a cost-effective technique to alleviate wavelength blocking in some links of a wavelength-routed optical network by increasing the number of wavelengths in those links. In this letter, we investigate the effects of overlaying fibre in an all-optical network (AON) based on GÉANT2 topology. The constraint-based routing and wavelength assignment (CB-RWA) algorithm locates where cost-efficient upgrades should be implemented. Through numerical examples, we demonstrate that the network capacity improves by 25 per cent by overlaying fibre on 10 per cent of the links, and by 12 per cent by providing hop reduction links comprising 2 per cent of the links. For the upgraded network, we also show the impact of dynamic traffic allocation on the blocking probability. Copyright © 2010 John Wiley & Sons, Ltd.

Fabrication and characterisation of 45º and Ex 45º:tilted fibre gratings and their applications in fibre lasers and sensors

In this thesis, I present the studies on fabrication, spectral and polarisation characterisation of fibre gratings with tilted structures at 45º and > 45º (namely 45º- TFGs and ex 45º-TFGs throughout this thesis) and a range of novel applications with these two types of grating. One of the major contributions made in this thesis is the systematic investigation of the grating structures, inscription analysis and spectral and polarisation properties of both types of TFGs. I have inscribed 45º-TFGs in standard telecom and polarisation maintaining (PM) fibres. Two wavelength regions of interest have been explored including 1.55 µm and 1.06 µm. Detailed analysis on fabrication and characterisation of 45º-TFGs on PM fibres have also been carried out for the first time. For ex 45º- TFGs, fabrication has been investigated only on low-cost standard telecom fibre. Furthermore, thermal responses have been measured and analysed showing that both types of TFG have low responsivity to temperature change. More importantly, their refractive index (RI) responses have been characterised to verify the high responsivity to surrounding medium. Based on the unique polarisation properties, both types of TFG have been applied in fibre laser systems to improve the laser performance, which forms another major contribution of the research presented in this thesis. The integration of a 45º-TFG to the Erbium doped fibre laser (EDFL) enables single polarisation laser output at a single wavelength. When combing with ex 45º-TFGs, the EDFL can be transformed to a multi-wavelength switchable laser with single polarisation output. Furthermore, by utilising the polarisation property of the TFGs, a 45º-TFG based mode locked fibre laser is implemented. This laser can produce laser pulses at femtosecond scale and is the first application of TFG in the field of nonlinear optics. Another important contribution from the studies is the development of TFG based passive and active optical sensor systems. An ex 45º-TFG has been successfully developed into a liquid level sensor showing high sensitivity to water based solvents. Strain and twist sensors have been demonstrated via a fibre laser system using both 45°- and ex 45º-TFG with capability identifying not just the twist rate but also the direction. The sensor systems have shown the added advantage of low cost signal demodulation. In addition, load sensor applications have been demonstrated using the 45º-TFG based single polarisation EDFL and the experimental results show good agreement with the theoretical simulation.

Risk-benefit and cost-effectiveness assessments of the statins

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Cost-effective upgrade of WDM all-optical networks using overlay fibres and hop reduction links

Fibre overlay is a cost-effective technique to alleviate wavelength blocking in some links of a wavelength-routed optical network by increasing the number of wavelengths in those links. In this letter, we investigate the effects of overlaying fibre in an all-optical network (AON) based on GÉANT2 topology. The constraint-based routing and wavelength assignment (CB-RWA) algorithm locates where cost-efficient upgrades should be implemented. Through numerical examples, we demonstrate that the network capacity improves by 25 per cent by overlaying fibre on 10 per cent of the links, and by 12 per cent by providing hop reduction links comprising 2 per cent of the links. For the upgraded network, we also show the impact of dynamic traffic allocation on the blocking probability. Copyright © 2010 John Wiley & Sons, Ltd.

Analysis and representation of statistical performance of JPEG2000 encoded image over wireless channels

JPEG2000 is a new coming image standard. In this paper we analyze the performance of error resilience tools in JPEG2000, and present an analytical model to estimate the quality of JPEG2000 encoded image transmitted over wireless channels. The effectiveness of the analytical model is validated by simulation results. Furthermore, analytical model is utilized by the base station to design efficient unequally error protection schemes for JPEG2000 transmission. In the design, a utility function is denned to make a tradeoff between the image quality and the cost for transmitting the image over wireless channel. © 2002 IEEE.

Health related quality of life and perception of stigmatisation in adolescents living with sickle cell disease in Nigeria:a cross sectional study

Background: Sickle cell disease impacts the physical, emotional and psychological aspects of life of the affected persons, often times exposing them to disease associated stigma from the society and alters the health related quality of life (HRQoL). This study compared the HRQoL of adolescents with sickle cell disease with their healthy peers, identified socio-demographic and clinical factors impacting HRQoL, and determined the extent and effects of SCD related stigma on quality of life. Procedure: We conducted a cross-sectional survey among 160 adolescents, 80 with SCD and 80 adolescents without SCD. Socio-demographic and clinical data were collected using a pre-tested questionnaire. HRQoL was investigated using the Short Form (SF-36v2) Health Survey. SCD perceived stigma was measured using an adaptation of a perceived stigma questionnaire. Results: Adolescents with SCD have significantly worse HRQoL than their peers in all of the most important dimensions of HRQoL (physical functioning, physical roles limitation, emotional roles limitation, social functioning, bodily pain, vitality and general health perception) except mental health. Recent hospital admission and SCD related complication further lowered HRQoL scores. Over seventy percent of adolescents with SCD have moderate to high level of perception of stigmatisation. Hospitalisation, SCD complication, SCD stigma were inversely, and significantly associated with HRQoL. Conclusions: Adolescents living with SCD in Nigeria have lower health related quality of life compared to their healthy peers. They also experience stigma that impacts their HRQoL. Complications of SCD and hospital admissions contribute significantly to this impairment. Pediatr Blood Cancer 2015;62:1245-1251.

Enabling long journeys in electric vehicles:design and demonstration of an infrastructure location model

This research develops a methodology and model formulation which suggests locations for rapid chargers to help assist infrastructure development and enable greater battery electric vehicle (BEV) usage. The model considers the likely travel patterns of BEVs and their subsequent charging demands across a large road network, where no prior candidate site information is required. Using a GIS-based methodology, polygons are constructed which represent the charging demand zones for particular routes across a real-world road network. The use of polygons allows the maximum number of charging combinations to be considered whilst limiting the input intensity needed for the model. Further polygons are added to represent deviation possibilities, meaning that placement of charge points away from the shortest path is possible, given a penalty function. A validation of the model is carried out by assessing the expected demand at current rapid charging locations and comparing to recorded empirical usage data. Results suggest that the developed model provides a good approximation to real world observations, and that for the provision of charging, location matters. The model is also implemented where no prior candidate site information is required. As such, locations are chosen based on the weighted overlay between several different routes where BEV journeys may be expected. In doing so many locations, or types of locations, could be compared against one another and then analysed in relation to siting practicalities, such as cost, land permission and infrastructure availability. Results show that efficient facility location, given numerous siting possibilities across a large road network can be achieved. Slight improvements to the standard greedy adding technique are made by adding combination weightings which aim to reward important long distance routes that require more than one charge to complete.

Synthesis and characterisation of polyacrylonitrile and its derived carbon materials

Carbon is a versatile material which is composed of different allotropes, and also come in with different structures. Carbon nanofibres (CNFs) is one dimensional carbon nanomaterials, which have exhibited superior mechanical properties, great specific area, good electrical conductivity, good biocompatibility, and ease of modification. In addition to the lower cost associated to compare with carbon nanotubes (CNTs), CNFs have been attracted in numerous applications, such as reinforcement materials, filtrations, Li-ion battery, supercapacitor as well as tissue engineering, just to list a few. Therefore, it is a great deal to understand the relationship between the fabrication conditions and the characteristics of the resulted CNFs. In this project, electrospun PAN NFs were used as precursor material to fabricate carbon nanofibres. In order to produce CNFs with good morphology, the processing parameters of PAN nanofibres by electrospinning was optimized toward to the morphology at solution concentration of 12 wt%. The optimized processing parameters at given concentration were 16 kV, 14 cm and 1.5 mL/h, which led to the formation of PAN NFs with average fibre diameter of approximately 260 nm. Along with the effect of processing parameter study, the effect of concentration on the morphology was also carried out at optimized processing parameters. It was found that by increasing concentration of PAN solution from 2 to 16%, the resulted PAN transformed from beads only, to beaded fibres and finally to smooth fibres. With further increasing concentration the morphology of smooth fibres remain with increase in the fibre diameter. Electrospun PAN NFs with average fibre of 306 nm was selected to be converted into CNFs by using standard heating procedures, stabilisation in air at 280 °C and carbonization in N2. The effect of carbonization temperature ranging from 500 to 1000 °C was investigated, by using SEM, FTIR, Raman, and Impedance spectroscopy. With increasing carbonization temperature from 500 to 1000 °C, the diameter of NFs was decreased from 260 to 187, associated with loss of almost all functional groups of NFs. It was indicated by Raman results, that the graphitic crystallite size was increased from 2.62 to 5.24 nm, and the activation energy obtained for this growth was 7570 J/mol. Furthermore, impedance results (i.e. Cole-Cole plot) revealed that the electrical characteristic of CNFs transitioned from being insulating to electrically conducting in nature, suggested by the different electrical circuits extracted from Cole-Cole plots with carbonization temperature from 500 to 800 °C. The carbonization on PAN NFs with diameter of ~431nm was carried out by using novel route, microwave plasma enhance chemical vapour deposition (MPECVD) process. To compare with carbonized PAN NFs by using conventional route, MPECVD was not only able to facilitate carbonization process, but more interestingly can form carbon nanowalls (CNWs) grown on the surfaces of carbonized PAN NFs. Suggested by the unique morphology, the potential applications for the resulted carbon fibrous hybrid materials are supercapacitor electrode material, filtrations, and etc., The method developed in this project required one step less, compared with other literature. Therefore, using MPECVD on stabilised PAN NFs is proposed as economical, and straightforward approach towards mass production of carbon fibrous hybrid materials containing CNWs.

Encouraging the intellectual craft of living research:tattoos, theory and time

This chapter contributes to the anthology on learning to research - researching to learn because it emphases a need to design curricula that enables living research, and on-going researcher development, rather than one that restricts student and staff activities, within a marketised approach towards time. In recent decades higher education (HE) has come to be valued for its contribution to the global economy. Referred to as the neo-liberal university, a strong prioritisation has been placed on meeting the needs of industry by providing a better workforce. This perspective emphasises the role of a degree in HE to secure future material affluence, rather than to study as an on-going investment in the self (Molesworth , Nixon & Scullion, 2009: 280). Students are treated primarily as consumers in this model, where through their tuition fees they purchase a product, rather than benefit from the transformative potential university education offers for the whole of life.Given that HE is now measured by the numbers of students it attracts, and later places into well-paid jobs, there is an intense pressure on time, which has led to a method where the learning experiences of students are broken down into discrete modules. Whilst this provides consistency, students can come to view research processes in a fragmented way within the modular system. Topics are presented chronologically, week-by-week and students simply complete a set of tasks to ‘have a degree’, rather than to ‘be learners’ (Molesworth , Nixon & Scullion, 2009: 277) who are living their research, in relation to their own past, present and future. The idea of living research in this context is my own adaptation of an approach suggested by C. Wright Mills (1959) in The Sociological Imagination. Mills advises that successful scholars do not split their work from the rest of their lives, but treat scholarship as a choice of how to live, as well as a choice of career. The marketised slant in HE thus creates a tension firstly, for students who are learning to research. Mills would encourage them to be creative, not instrumental, in their use of time, yet they are journeying through a system that is structured for a swift progression towards a high paid job, rather than crafted for reflexive inquiry, that transforms their understanding throughout life. Many universities are placing a strong focus on discrete skills for student employability, but I suggest that embedding the transformative skills emphasised by Mills empowers students and builds their confidence to help them make connections that aid their employability. Secondly, the marketised approach creates a problem for staff designing the curriculum, if students do not easily make links across time over their years of study and whole programmes. By researching to learn, staff can discover new methods to apply in their design of the curriculum, to help students make important and creative connections across their programmes of study.

‘Everything’s from the inside out with PCOS’:exploring women’s experiences of living with Polycystic Ovary Syndrome (PCOS) and co-morbidities through Skype™ interviews

Polycystic ovary syndrome is an endocrine disorder affecting 1 in 10 women. Women with polycystic ovary syndrome can experience co-morbidities, including depressive symptoms. This research explores the experience of living with polycystic ovary syndrome and co-morbidities. Totally, 10 participants with polycystic ovary syndrome took part in Skype™ interviews and analysed using thematic analysis. Four themes emerged from the data: change (to life plans and changing nature of condition); support (healthcare professionals, education and relationships); co-morbidities (living with other conditions and depression, self-harm and suicidal ideation) and identity (feminine identity and us and them). The findings highlight the need for screening of women with polycystic ovary syndrome for depressive disorders.

Designed for Patience. The Significance of International Factors in the Ukrainian and Belarusian Transitions

This paper focuses on Belarus in order to find explanation as to why could Lukashenko remain the authoritarian leader of Belarus, while in Ukraine the position of the political elite had proved less stable and collapsed in 2004. We seek to determine whether the internal factors (macroeconomic conditions, standard of living, the oppressive nature of the political system) play a significant role in the operation of the domino effect. This article emphasises the determining role of immanent internal factors, thus the political stability in Belarus can be explained by the role of the suppressing political regime, the hindrance of democratic rights and the relatively good living conditions that followed the transformational recession. Whilst in Ukraine, the markedly different circumstances brought forth the success of the Orange Revolution.