Seafood consumption and supply sources in Hawaii, 2000-2009

Measures of consumption and supply sources of seafood can provide valuable input to research and policy planning of a viable food system. This article fills a gap in the existing literature by mapping the existing seafood supply flows from various sources (local, domestic U.S., and foreign) in Hawaii. The authors trace the seafood transshipment of foreign origin via the continental United States to Hawaii and update total and per capita consumption of seafood more accurately by including noncommercial catches into the analysis. Per capita seafood consumption in Hawaii from all commercial sources is estimated at an annual average of 29 edible pounds during the 10-year period from 2000 to 2009. This is significantly more than the 16 edible pounds for all U.S consumption in 2009. Including noncommercial catch, the same measure increases to 37 edible pounds. The eight-pound differential suggests that noncommercial fishing is an important source of seafood supply in Hawaii. Overall, fresh tuna (Thunnus spp.) is the single largest species group consumed, followed by Pacific and Atlantic salmon (Salmonidae). By edible weight, the majority of Hawaii’s commercial seafood supply comes from foreign sources (57%) vs. local sources (37%), and U.S. domestic sources (6%). The leading sources for Hawaii’s direct seafood imports from 2000 to 2009, were Taiwan, Japan, New Zealand, the Philippines, and the Marshall Islands. Local supply becomes the majority source once noncommercial catch is included with 51% of the total supply.

Autonomous extraction of optimal flame fronts in OH planar laser-induced fluorescence images.

The location of a flame front is often taken as the point of maximum OH gradient. Planar laser-induced fluorescence of OH can be used to obtain the flame front by extracting the points of maximum gradient. This operation is typically performed using an edge detection algorithm. The choice of operating parameters a priori poses significant problems of robustness when handling images with a range of signal-to-noise ratios. A statistical method of parameter selection originating in the image processing literature is detailed, and its merit for this application is demonstrated. A reduced search space method is proposed to decrease computational cost and render the technique viable for large data sets. This gives nearly identical output to the full method. These methods demonstrate substantial decreases in data rejection compared to the use of a priori parameters. These methods are viable for any application where maximum gradient contours must be accurately extracted from images of species or temperature, even at very low signal-to-noise ratios.

Report of the special session of "Chesapeake Bay Ecological Forecasting: Moving Ecosystem Modeling from Research to Operation" of the 2010 Chesapeake Modeling Symposium

Moving ecosystem modeling from research to applications and operations has direct management relevance and will be integral to achieving the water quality and living resource goals of the 2010 Chesapeake Bay Executive Order. Yet despite decades of ecosystem modeling efforts of linking climate to water quality, plankton and fish, ecological models are rarely taken to the operational phase. In an effort to promote operational ecosystem modeling and ecological forecasting in Chesapeake Bay, a meeting was convened on this topic at the 2010 Chesapeake Modeling Symposium (May, 10-11). These presentations show that tremendous progress has been made over the last five years toward the development of operational ecological forecasting models, and that efforts in Chesapeake Bay are leading the way nationally. Ecological forecasts predict the impacts of chemical, biological, and physical changes on ecosystems, ecosystem components, and people. They have great potential to educate and inform not only ecosystem management, but also the outlook and opinion of the general public, for whom we manage coastal ecosystems. In the context of the Chesapeake Bay Executive Order, ecological forecasting can be used to identify favorable restoration sites, predict which sites and species will be viable under various climate scenarios, and predict the impact of a restoration project on water quality.

Monitoring Hawaii’s marine protected areas: examining spatial and temporal trends using a seascape approach

Hawaii’s coastal marine resources have declined dramatically over the past 100 years due to multiple anthropogenic stressors including overfishing, coastal development, pollution, overuse, invasive species and climate change. It is now becoming evident that ecosystem-based management, in the form of marine protected areas (MPAs), is necessary to conserve biodiversity, maintain viable fisheries, and deliver a broad suite of ecosystem services. Over the past four decades, Hawaii has developed a system of MPAs to conserve and replenish marine resources around the state. These Marine Life Conservation Districts (MLCDs) vary in size, habitat quality, and management regimes, providing an excellent opportunity to test hypotheses concerning MPA design and function using multiple discreet sampling units. NOAA/NOS/NCCOS/Center for Coastal Monitoring and Assessment’s Biogeography Branch used digital benthic habitat maps coupled with comprehensive ecological studies between 2002 and 2004 to evaluate the efficacy of all existing MLCDs using a spatially-explicit stratified random sampling design. The results from this work have shown that areas fully protected from fishing had higher fish biomass, larger overall fish size, and higher biodiversity than adjacent areas of similar habitat quality. Other key findings demonstrated that top predators and other important fisheries species were more abundant and larger in the MPAs, illustrating the effectiveness of these closures in conserving these populations. Habitat complexity, protected area size and habitat diversity were the major factors in determining effectiveness among MPAs.

Recent advances in the hatchery production of seed of some commercial bivalves in India

The Central Marine Fisheries Research Institute has established a shellfish hatchery laboratory at its Tuticorin Research Centre with the objective of developing appropriate technology for the production of seed of commercial bivalves. A viable technology was developed for the mass production of the seed of Pinctada fucata, P. margaretifera, Crassostrea madrasensis, Perna indica, P. viridis, Anadara granosa and Meretrix meretrix. The hatchery facility and the technology, comprising brood stock conditioning, induced spawning, larval rearing and seed production are described. In the light of these developments the future outlook is appraised.

Disinfection of aquarium effluents by chlorination and UV treatment

The study was conducted to investigate the efficacy of chlorine and UV irradiation in disinfecting aquarium effluent. A non-agglutinating, a virulent strain of Aeromonas salmonicida (NCIMB 11 02) was used as the test organism. Effluents from a fish tank were inoculated with a suspension of test organisms and subsequently treated with different concentrations of hypochlorite and UV irradiation separately and simultaneously. When used alone, 1.0 ppm hypochlorite reduced the viable cell count from 6.5 log to 3.0 log within 20 minutes of contact period. On the other hand, when used in combination with UV irradiation only 0.5 ppm hypochlorite exerted the same bactericidal effect within the same contact period as was observed with 1.0 ppm hypochlorite alone. This result indicated that required dose of disinfectant for the disinfection of aquarium effluents can be considerably reduced when it is used in combination with UV irradiation.

Induction of mitotic and meiotic gynogenesis and production of genetic clones in rohu, Labeo rohita Ham.

Studies were undertaken to produce genetic clones derived from all homozygous mitotic gynogenetic individuals in rohu, Labeo rohita Ham. ln view of this, attempts were made to interfere with the normal functioning of the spindle apparatus during the first mitotic cell division of developing eggs using heat shocks, there by leading to the induction of mitotic gynogenetic diploids in the F1 generation. Afterwards, viable mitotic gynogenetic alevins were reared and a selected mature female fish was used to obtain ovulated eggs which were fertilized later with UV-irradiated milt. Milt was diluted with Cortland’s solution and the sperm concentration was maintained at 10⁸/ml. The UV-irradiation was carried out for 2 minutes at the intensity of 200 to 250 µW/cm² at 28± 1°C. The optimal heat shock of 40°C for 2 minutes applied at 25 to 30 minutes a.f. was used to induce mitotic gynogenesis in first (F1) generation and at 3 to 5 minutes a.f. to induce meiotic gynogenesis in the second (F2) generation. The results obtained are presented and the light they shed on the timing of the mitotic and meiotic cell division in this species is discussed.

Quality aspects of some exportable dried fishery products of Bangladesh

A study was conducted to evaluate the quality aspects of eight exportable dried fishery products of Bangladesh. The products were evaluated by examining organoleptic properties, water reconstitution behavior, microbiological and biochemical aspects. The water reconstitution rate was faster in ribbon fish and Bombay duck, and slower in other fishes and air bladder and shark fin products. Organoleptic and physical characteristics in respect of color, odor, texture, insect infestation and broken pieces of the products revealed that all of the products were either in excellent or acceptable condition. Total viable bacterial load ranged from 0.95 x 104 CFU/g to 1.8 x 104 CFU/g in dried products. Coliform bacteria was absent in all the dried fishery products. The results of moisture, crude protein, lipid and ash content of the products ranged from 16.20 to 23.51%, 58.37 to 82.86%, 0.17 to 14.44% and 0.58 to 9.23%, respectively. Non-protein nitrogen (NPN) contents were in the range of 0.104 to 2.372% and the pepsin digestibility values were of 88.41 to 94.23%. The results of the study suggested that the exportable dried products were of good quality and hygienically safe.

Study on the intestinal bacteria of Labeo rohita (Ham.)

The quantitative and qualitative aspects of intestinal bacteria of rohu fish (Labeo rohita) showed that total viable count of bacteria ranged from 9.9 x 106 to 1.4 x 107 CFU/g of intestine in different age groups of fish. The bacterial load was highest in the month of July and lowest in January. The genera of the isolates from intestine included Coryneform, Micrococcus, Flavobacterium, Cytophaga, Achromobacter, Aeromonas Enterobacteriaceae and Vibrio. Coryneform was the dominant group throughout the study period followed by Micrococcus and Enterobacteriaceae. Marked variations in the bacterial load and generic composition of intestinal bacteria were evident during the study period in different age groups of rohu fish.

Pathogenicity of Aeromonas hydrophila artificially infected to Indian major carp (Cirrhinus mrigala Ham.)

Abrasion, feeding, injection and immersion methods were used to evaluate the pathogenicity of five different strains of Aeromonas hydrophila viz. RG (rui gill), ML (mrigal lesion), SG (sharpunti gill), F1K (mrigal kidney), GFL (gold fish lesion) and Ah-19 (Aeromonas hydrophila-19, Ref. Strain) against C. mrigala H. Bacterial suspension containing viable cells of 7.5x 10⁵ per ml was found to be very effective in intramuscular injection and feeding resulting 100% mortality after 96hr of inoculation. The strain RG, ML and F1K produced scale loss with erosion of the skin surface with/without hemorrhagic lesion after 48hr of inoculation following abrasion method. The strains SG and Ah-19 resulting scale loss with erosion of the skin surface with/without hemorrhagic lesion after 72hr of inoculation following abrasion and injection methods. SG and F1K caused reddening in mouth region after 72hr of feeding inoculation, whereas RG resulted frank ulcers from eroded dermal layer exposing underlying musculature which was hemorrhagic after 96hr of inoculation by abrasion method.

System model for studying fibre grating dispersion compensators

A complete optical system model has been developed and used to assess chirped fibre Bragg grating dispersion compensators. Gratings suitable for dispersion compensation in both laser based and modulator based optical communications systems have been modelled. A grating 10 cm in length has been shown to permit virtually dispersion free transmission over 425 km, when used in an externally modulated system. Long haul dispersion compensation using several 2 cm gratings spaced at intervals along the fibre is also modelled, illustrating viable 10Gbit/s transmission over a distance in excess of 168 km.

Growth of Tilapia mossambica Peters in different salinities

Tilapia mossambica was found to grow better in saline media than in freshwater. The fish not only grew to maturity but were able to reproduce viable fry in 100% sea water.

MOS and bipolar gated thyristor: A thyristor with IGBT switching characteristics

The IGBT has become the device of choice in many high-voltage-power electronic applications, by virtue of combining the ease of MOS gate control with an acceptable forward voltage drop. However, designers have retained an interest in MOS gated thyristor structures which have a turn-off capability. These offer low on-state losses as a result of their latching behaviour. Recently, there have been various proposals for dual-gate devices that have a thyristor on-state with IGBT-like switching. Many of these dual gated structures rely on advanced MOS technology, with inherent manufacturing difficulties. The MOS and bipolar gated thyristor offers all the advantages of dual gated performance, while employing standard IGBT processing techniques. The paper describes the MBGT in detail, and presents experimental and simulation results for devices based on realistic commercial processes. It is shown that the MBGT represents a viable power semiconductor device technology, suitable for a diverse range of applications. © IEE, 1998.

Feasibility of damage detection using vibration data in a population of cylinders

The feasibility of vibration data to identify damage in a population of cylindrical shells is assessed. Vibration data from a population of cylinders were measured and modal analysis was employed to obtain natural frequencies and mode shapes. The mode shapes were transformed into the Coordinate Modal Assurance Criterion (COMAC). The natural frequencies and the COMAC before and after damage for a population of structures show that modal analysis is a viable route to damage identification in a population of nominally identical cylinders. Modal energies, which are defined as the integrals of the real and imaginary components of the frequency response functions over various frequency ranges, were extracted and transformed into the Coordinate Modal Energy Assurance Criterion (COMEAC). The COMEAC before and after damage show that using modal energies is a viable approach to damage identification in a population of cylinders.

Fishing gear and methods for off-shore fishing in Sri Lanka

The author describes the commercial viable off-shore fishing methods for catching known commercial resources available around Sri Lanka. He also describes the in-shore fishing methods such as bait fishery which are related and of prime importance for carrying out certain off-shore methods. The paper is intended as a background for the description of fishing methods. The methods discussed are: (1) Longlining for large pelagic species such as large tuna (yellow fin, big eye), shark, spearfish and others; (2) Drift-netting for small and large tuna species (skipjack, yellow fin and others), shark, spearfish, etc.; (3) Pole and line for all deep-sea pelagic species such as skipjack, yellow fin, frigate mackerel, etc.; and (4) Purse seining (small scale) for small pelagic species suitable as bait fish for pole and line and longline fisheries.