Aplicação de sistema de gestão da qualidade na execução de obras de pavimentação asfáltica, baseado nas diretrizes da ABNT NBR ISO 9001:2008

This work brings to its content proposed deployment of a system of quality management in paving asphalt based on the elaboration of a basic training to meet those entering this area of civil engineering at a technical manual for the implementation of major services running on paving of roads. The training was designed to serve both those entering the field of asphalt paving, synthesizing the complex processes involved in paving services and providing an overview of the steps in implementation thereof, as well as entrants must meet the enterprise user of this system, providing them an idea of the method used by the company designing the paving of roads. The technical manual presented in turn, has 8 (eight) of the main services components of a work of paving, which are: Mobilization and Maintenance of construction site, Regularization and subfloor preparation, execution or sub-base BGS base (graded gravel plain), Execution of sub-base or base BGTC (graded gravel treated with cement), Implementation of subbase or base Macadam hydraulic Priming bituminous waterproofing, asphalt binder Priming and finally the execution flexible pavement - HMA (hot milled asphalt concrete). These services are presented in the form of IT-Education work, this seven items are presented that guide the performance of services, thus providing overall guidelines to perform the services described in it. The development of IT's was based on experiences in day-to-day paving near the theoretical precepts presented in the literature, so the conditions specified in these documents aim to always guide the implementation of services in general, giving the process a versatility major operation, as this work takes into account the dynamics of such services, as well as the variety of their execution according to local conditions and specified in the project. So in general we can say that this ... (Complete abstract click electronic access below)

Análise da viabilidade econômica na implantação de inversores frequência em sistemas de bombeamento

The present work aims to conduct a study of the economic feasibility of the implementation of variable frequency inverters in pump systems with variable flow rates. The concern with the reduction of energy expenditure in industries raised in 2001 due to the energy crisis that hit Brazil at that time, forcing industries to reduce their electric costs under penalty of fines if this were not done (MOREIRA, 2008). Frequency inverter is an electronic device that allow greater control in the operation of pumping systems and also a reduction in electrical consumption, being a viable solution to achieve a reduction in energy consumption. For the development of this work, approaching important topics in pumping systems was necessary in order to make a correct choice of hydraulic pumping and also other components responsible for the operation of the system , such as electric motors and frequency inverters. In the case study, a theoretical analysis of the behavior of electrical consumption in systems with variable flow rates was performed, comparing when the system is operated via frequency inverters and when the system is operated without such a device. As expected, the result of the implantation of the device was quite satisfactory, and the primary goal of reducing energy expenditure was achieved. Also important to highlight the environmental issue of this work, as all forms of energy production affects nature in some way, achieving a reduction in consumption also contributes indirectly in environmental conservation

Padronização e reprodutibilidade de um teste específico de avaliação da capacidade aeróbia em jogadores de futsal

Introdução: O futsal é uma modalidade esportiva altamente dinâmica e sua prática em nível de rendimento é caracterizada por uma exigência altíssima dos sistemas anaeróbio e aeróbio, sendo o último, responsável por sustentar as altas intensidades exigidas durante a partida. Um exemplo de teste para avaliar a capacidade aeróbia é o “Circuito de Hoff”, porém específico para o futebol. Com a finalidade de elaborar um protocolo de teste específico para o futsal, este estudo procura padronizar o teste “Circuito de Hoff” como uma forma i ndireta de i nvestigar a capacidade aeróbia de atletas dessa modalidade. Objetivo: Padroni zar o “Circuito de Hoff” para avaliação da capacidade aeróbia de jogadores de futsal, determinada pelo teste de lactato mínimo. Metodologia: Participaram do estudo 8 atletas de futsal do sexo masculino (idade: 21,75±2,05 anos) pertencentes a uma equipe universitária de competição do Estado de São Paulo. Inicialmente os participantes passaram por uma avaliação antropométrica e deram início ao um período de 5 dias de familiarização ao Hofffutsal e logo após então realizaram o teste de lactato mínimo no circuito Hofffutsal. Após 7 dias, teste de lactato mínimo no circuito Hofffutsal foi reaplicado para a verificação da reprodutibilidade (intra-teste). Para análise estatística de normalidade e homogeneidade dos dados foram utilizados os testes Shapiro-Wilks e Levene respectivamente. Para comparação dos resultados foi realizado o teste t de Student pareado e a correlação de Pearson (p<0,05). Resultados: O teste t de Student não encontrou diferenças estatísticas entre os valores de Lac_mín teste x Lac_min Re-teste, e R2 Teste X R2 Re-teste. Apresentou-se valores de 7,75±0,29 mmol/l de lactato mínimo e r2 de 0,94±0,09 para teste e um valor de 7,69±0,29 mmol/l de lactato mínimo ...(Resumo completo, clicar acesso eletrônico abaixo)

O uso de software para estudo de seletividade e coordenação

The present work aims to prepare a study of selectivity and coordination in an isolated electrical system with the aid of computer software PTW (Power Tools for Windows). Based on appropriate protection standards, on equipment data and the survey of the curves of “time versus current” (Time Current Curve – TCC), may be defined protection settings to leave the system selective, coordinated and properly protected. Definitions of adjustments are made taking into account the data of, so called, thermal curves of the equipment, which take into account the rated current and the supportability of short-circuit current of the equipment and cables involved in the installation in question. For that we use the tools provided by the PTW in which an industrial electrical circuit is simulated, presenting and discussing the results. With that validates the software PTW, taking it as a great tool helper implementation the coordination and selectivity study

A financeirização da moradia e o Programa Minha Casa Minha Vida

This paper has it is hypotesis on the government program “My Home, My Life” and the assumption that it is a public politic attached to the market logic of financialization of the housing. It is understood that this program encourage capital for the main constructors and incorporated of brazilian heritage elite. It also served as well to promote more rentability to international capital and intensified the sociospacial segregration process as real state speculation has been potencialized. This work aims to present and discuss the program contradictions that have been sustained on the speech of wide subsidy offer and habitance construcution for low income workers - month income until three minimum salaries. Documents have shown that in the first phase of the program, habitance construction for this sector of population corresponded only to 5,5% of total habitation deficit. Businessmen on residance civil construction and public politic representatives have confirmed that the program interests are linked to financial market logic.The real benefits are not for low income workers, but for real state agents through extraordinaty profits of land and the so called new medium workers class(worker class C).We will search for embasement on the country history through the different governments and housing policies, in value theory and the concept of land income to understand the financialization process of the housing. We will also analyse oficial documents and the agents speech involved in real state market to show program contradictions and whose the real benefts are for

Avaliação das impedâncias em pontos de acupuntura

An experimental study in dogs was accomplished to evaluate impedances at the acupuncture points and the relative false points. According to the physics concepts and the Ohm’ Law, an electrical circuit was set up to determine the impedance. This circuit was introduced into three experiments in anesthetized dogs with needles at selected points. In the first two experiments, was applied an alternating tension with 200Hz frequency in the circuit and, in the last experiment, the frequency was increased to 10kHz, the tensions and electrical currents were measured between every pair of points for the all experiments. The impedances were calculated with the values obtained by experiments. The analysis of impedance values indicated that there is a coherent relation between the results and the applied frequencies in circuit, so just at high frequency condition admits the correct measurement of total impedance, therefore the last experiment gave the result which agreed with the theory, that the impedances at acupuncture points are lower than the impedances at false points

Proposta de metodologia para aplicação de eficiência energética em uma usina hidrelétrica

Pós-graduação em Engenharia Mecânica - FEG

Controlador PID utilizando microcontrolador PIC

This monograph proposes the implementation of a low cost PID controller utilizing a PIC microcontroller, and its application in a positioning system previously controlled by a dedicated integrated circuit for a positioning system. Applying the closed-loop PID control, the system instability was reduced, and its response was smoother, eliminating vibrations and mechanical wear compared to its response with the dedicated integrated circuit, which has a very limited control action. The actuator of the system is a DC motor, whose speed is controlled by the Pulse Width Modulation (PWM) technique, using a Full-Bridge circuit, allowing the shift of direction of rotation. The utilized microcontroller was the PIC16F684, which has an enhanced PWM module, with its analog converters used as reference and position feedback. The positioning sensor is a multiturn potentiometer coupled to the motor axis by gears. The possibility of programming the PID coefficients in the microcontroller, as well as the adjustment of the sampling rate, allows the implemented system achieving high level of versatility

Sistema de automação residencial controlado via rede doméstica

The present work develops a residential automation system controlled by PIC microcontroller connected to a domestic network using the TCP/IP protocol. This was motivated by the viability of building an automation system to control basic elements of a house with low cost, which cannot be found nowadays. Initially is presented a brief history of the automation systems and an introduction about PIC microcontrollers. Afterwards is presented an overview of the system to be implemented. Then it is shown a suggested circuit and the sensor and actuator elements as well as the software to manage the system, this was all build and test in the laboratory. In the end are the results obtained from the prototype, like the energy consumption, the cost, efficiency and reliability

Dispositivo de microdescargas em gases na pressão atmosférica

Neste trabalho foi desenvolvido um dispositivo de microdescargas em gases à pressão atmosférica para geração de plasma a fim de ser utilizado no tratamento de superfícies. O trabalho foi baseado em um estudo de iniciação científica que aconteceu em duas etapas. Na introdução apresentam-se as motivações do estudo, o dispositivo desenvolvido na primeira etapa do trabalho bem como os primeiros resultados e propostas de melhorias. Definem-se os objetivos da segunda etapa, que contemplam modificações no dispositivo de descarga e na fonte de alimentação. Em seguida são explanados os métodos utilizados para confecção do dispositivo, construção da fonte de alimentação e circuito de fotodetecção para observar as descargas. Apresenta-se o modelo e configurações dos experimentos, os resultados obtidos são expostos e debatidos brevemente. Colocam-se as conclusões do trabalho e novas propostas de investigação e melhoramentos para o estudo das microdescargas. Seguem-se os agradecimentos aos envolvidos no projeto e, por fim, a bibliografia utilizada

Projeto de um Multiplicador Divisor Anal´ogico em tecnologia CMOS para uso em controlador fuzzy tipo-2 intervalar

The main objective of the presented study is the design of a analog multiplier-divider as integrant part of the type-reducer circuit of type-2 fuzzy controller chip. The proposed circuit is a multiplier/divider which operates in current mode, in the CMOS technology with a supply voltage of 1.8 V.The circuit simulation was performed in PSPICE software with simulation model provided by AMS (Austria Mikro Systems International) in CMOS technology 0.35μm

A influência da temperatura nas impedâncias de sequência de condutores utilizados na rede primária de distribuição

Distribution networks are formed by long lines that carry electricity substations to homes and industries. These lines have associated impedance and depending on operating conditions of the network these impedances may vary. This paper provides a detailed analysis of the effects observed in studies of voltage drop, short circuit and electrical losses, when considered the drivers sequence impedances used in primary distribution network at different temperatures. Therefore, it is initially presented a calculation methodology and details the factors that influence the final values. The methodology presented tackles in a practical way the main factors that directly or indirectly influence the values of the impedances as an emblematic example and will be properly dealt with throughout the paper is the effect of temperature on the values of the sequence impedances. More specifically is dealt with the case of XLPE cables protected, by having a higher maximum operating temperature than the operating temperature of the network. The effects observed in the power flow generated when considering the impedance values at both temperatures were analyzed. The impedance drivers tend to increase with increasing temperature. Thus the impedance of the conductor XLPE protected will tend to be greater for the maximum operating temperature for which the operating temperature of the network, resulting in greater voltage drop and higher electrical losses

Desenvolvimento de um conversor estático PWM para o acionamento de LED’S para iluminação publica

This work deals with the development of a switched-mode power supply circuit based on a Buck topology converter with a Boost Rectifier One-Cycle Control with Power Factor Correction developing, thus, a source of direct current for a module of 50 power LEDs that will be used in a lamp for public street lightning. It is presented, at first, some aspects about the most common technologies used in lamps of public street lightning in Brazil and a comparison with the White LED high power, which is the one that presents itself as the most promising among the existing market. Then it is presented the detailed development of the static converter switched PWM, consisting of a Boost rectifier with power factor correction and methodology of control One-Cycle Control associated with a Buck converter controlled by a PI method that operates as a direct current source . At the end of the simulation results of the circuit through the PSIM software are presented to verify the design behavior

Chaveamento de cargas intermitentes usando sensor de corrente

Due to concerns about rational use of energy, several alternative technologies of power generation appeared, including the conversion of solar energy into electrical energy by photovoltaic panels. In low-income households, the refrigerator represents considerable impact on the electric bill, since it requires constant power given its use in food preservation. It is possible to reduce this share, with the use of an alternative energy source. This work presents a timed switching electronic system, which allows commercial equipment that is not affected by short interruptions in the power supply to use a photovoltaic panel as a source of alternative energy, which usually do not provide energy continuously. Switching is made automatically in case of low incidence of sunlight, and without any form of energy storage. Between each switching, there is a dead time without power supply, therefore preventing the use of synchronizers circuits between the photovoltaic panel and the public power grid. A circuit containing a 80C31 microcontroller is used to control the system’s switching. The photovoltaic panel’s voltage inverter is in H bridge configuration, and is also controlled by the microcontroller through Pulse Width Modulation, which makes use of preprogrammed tables to generate the control signals of the power transistors. Through the use of software simulations, the proposed system was tested, which is capable of supplying intermittent single-phase loads. The simulations indicates that the project developed in this paper can be assembled into a prototype and be tested under real operating conditions, as long as the scaling of components, the characteristics of the photovoltaic panel to be used, and the project involved load are taken into account

Desenvolvimento de estrutura para purificação de água potável, através da irradiação de UV com lâmpadas fluorescentes especiais

Pós-graduação em Engenharia Elétrica - FEIS