Evolution of strain-induced precipitates in a model austenitic Fe-30Ni-Nb steel and their effect on the flow behaviour

The present work investigated the evolution of strain-induced NbC precipitates in a model austenitic Fe-30Ni-Nb steel deformed at 925 °C to a strain of 0.2 during post-deformation holding between 3 and 1000 s and their effect on the reloading flow stress. The precipitate particles preferentially nucleated on the nodes of the periodic dislocation networks constituting microband walls. Holding for 10 s resulted in the formation of fine, largely coherent NbC particles with a mean diameter of ∼5 nm, which displayed a cube-on-cube orientation relationship with austenite and caused the maximum increase in the reloading steady-state flow stress. A further increase in the holding time from 30 to 1000 s led to the formation of semi-coherent, gradually coarser and more widely spaced particles with a mean diameter of 8 nm and above, which led to a gradual decrease in the reloading steady-state flow stress. The holding time increase resulted in progressive disintegration of the dislocation substructure and dislocation annihilation through static recovery processes, which was also reflected by the measured softening fractions. The precipitate particle shape changed during post-deformation annealing from elliptical to faceted octahedral and subsequently to tetra-kai-decahedral. © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Global, regional, and national incidence and mortality for HIV, tuberculosis, and malaria during 1990-2013: a systematic analysis for the Global Burden of Disease Study 2013

BACKGROUND: The Millennium Declaration in 2000 brought special global attention to HIV, tuberculosis, and malaria through the formulation of Millennium Development Goal (MDG) 6. The Global Burden of Disease 2013 study provides a consistent and comprehensive approach to disease estimation for between 1990 and 2013, and an opportunity to assess whether accelerated progress has occured since the Millennium Declaration. METHODS: To estimate incidence and mortality for HIV, we used the UNAIDS Spectrum model appropriately modified based on a systematic review of available studies of mortality with and without antiretroviral therapy (ART). For concentrated epidemics, we calibrated Spectrum models to fit vital registration data corrected for misclassification of HIV deaths. In generalised epidemics, we minimised a loss function to select epidemic curves most consistent with prevalence data and demographic data for all-cause mortality. We analysed counterfactual scenarios for HIV to assess years of life saved through prevention of mother-to-child transmission (PMTCT) and ART. For tuberculosis, we analysed vital registration and verbal autopsy data to estimate mortality using cause of death ensemble modelling. We analysed data for corrected case-notifications, expert opinions on the case-detection rate, prevalence surveys, and estimated cause-specific mortality using Bayesian meta-regression to generate consistent trends in all parameters. We analysed malaria mortality and incidence using an updated cause of death database, a systematic analysis of verbal autopsy validation studies for malaria, and recent studies (2010-13) of incidence, drug resistance, and coverage of insecticide-treated bednets. FINDINGS: Globally in 2013, there were 1·8 million new HIV infections (95% uncertainty interval 1·7 million to 2·1 million), 29·2 million prevalent HIV cases (28·1 to 31·7), and 1·3 million HIV deaths (1·3 to 1·5). At the peak of the epidemic in 2005, HIV caused 1·7 million deaths (1·6 million to 1·9 million). Concentrated epidemics in Latin America and eastern Europe are substantially smaller than previously estimated. Through interventions including PMTCT and ART, 19·1 million life-years (16·6 million to 21·5 million) have been saved, 70·3% (65·4 to 76·1) in developing countries. From 2000 to 2011, the ratio of development assistance for health for HIV to years of life saved through intervention was US$4498 in developing countries. Including in HIV-positive individuals, all-form tuberculosis incidence was 7·5 million (7·4 million to 7·7 million), prevalence was 11·9 million (11·6 million to 12·2 million), and number of deaths was 1·4 million (1·3 million to 1·5 million) in 2013. In the same year and in only individuals who were HIV-negative, all-form tuberculosis incidence was 7·1 million (6·9 million to 7·3 million), prevalence was 11·2 million (10·8 million to 11·6 million), and number of deaths was 1·3 million (1·2 million to 1·4 million). Annualised rates of change (ARC) for incidence, prevalence, and death became negative after 2000. Tuberculosis in HIV-negative individuals disproportionately occurs in men and boys (versus women and girls); 64·0% of cases (63·6 to 64·3) and 64·7% of deaths (60·8 to 70·3). Globally, malaria cases and deaths grew rapidly from 1990 reaching a peak of 232 million cases (143 million to 387 million) in 2003 and 1·2 million deaths (1·1 million to 1·4 million) in 2004. Since 2004, child deaths from malaria in sub-Saharan Africa have decreased by 31·5% (15·7 to 44·1). Outside of Africa, malaria mortality has been steadily decreasing since 1990. INTERPRETATION: Our estimates of the number of people living with HIV are 18·7% smaller than UNAIDS's estimates in 2012. The number of people living with malaria is larger than estimated by WHO. The number of people living with HIV, tuberculosis, or malaria have all decreased since 2000. At the global level, upward trends for malaria and HIV deaths have been reversed and declines in tuberculosis deaths have accelerated. 101 countries (74 of which are developing) still have increasing HIV incidence. Substantial progress since the Millennium Declaration is an encouraging sign of the effect of global action. FUNDING: Bill & Melinda Gates Foundation.

Reduced graphene oxide directed self-assembly of phospholipid monolayers in liquid and gel phases

The response of cell membranes to the local physical environment significantly determines many biological processes and the practical applications of biomaterials. A better understanding of the dynamic assembly and environmental response of lipid membranes can help understand these processes and design novel nanomaterials for biomedical applications. The present work demonstrates the directed assembly of lipid monolayers, in both liquid and gel phases, on the surface of a monolayered reduced graphene oxide (rGO). The results from atomic force microscopy indicate that the hydrophobic aromatic plane and the defect holes due to reduction of GO sheets, along with the phase state and planar surface pressure of lipids, corporately determine the morphology and lateral structure of the assembled lipid monolayers. The DOPC molecules, in liquid phase, probably spread over the rGO surface with their tails associating closely with the hydrophobic aromatic plane, and accumulate to form circles of high area surrounding the defect holes on rGO sheets. However, the DPPC molecules, in gel phase, prefer to form a layer of continuous membrane covering the whole rGO sheet including defect holes. The strong association between rGO sheets and lipid tails further influences the melting behavior of lipids. This work reveals a dramatic effect of the local structure and surface property of rGO sheets on the substrate-directed assembly and subsequent phase behavior of the supported lipid membranes.

Clustering and visualization of failure modes using an evolving tree

Despite the popularity of Failure Mode and Effect Analysis (FMEA) in a wide range of industries, two well-known shortcomings are the complexity of the FMEA worksheet and its intricacy of use. To the best of our knowledge, the use of computation techniques for solving the aforementioned shortcomings is limited. As such, the idea of clustering and visualization pertaining to the failure modes in FMEA is proposed in this paper. A neural network visualization model with an incremental learning feature, i.e., the evolving tree (ETree), is adopted to allow the failure modes in FMEA to be clustered and visualized as a tree structure. In addition, the ideas of risk interval and risk ordering for different groups of failure modes are proposed to allow the failure modes to be ordered, analyzed, and evaluated in groups. The main advantages of the proposed method lie in its ability to transform failure modes in a complex FMEA worksheet to a tree structure for better visualization, while maintaining the risk evaluation and ordering features. It can be applied to the conventional FMEA methodology without requiring additional information or data. A real world case study in the edible bird nest industry in Sarawak (Borneo Island) is used to evaluate the usefulness of the proposed method. The experiments show that the failure modes in FMEA can be effectively visualized through the tree structure. A discussion with FMEA users engaged in the case study indicates that such visualization is helpful in comprehending and analyzing the respective failure modes, as compared with those in an FMEA table. The resulting tree structure, together with risk interval and risk ordering, provides a quick and easily understandable framework to elucidate important information from complex FMEA forms; therefore facilitating the decision-making tasks by FMEA users. The significance of this study is twofold, viz., the use of a computational visualization approach to tackling two well-known shortcomings of FMEA; and the use of ETree as an effective neural network learning paradigm to facilitate FMEA implementations. These findings aim to spearhead the potential adoption of FMEA as a useful and usable risk evaluation and management tool by the wider community.

Facilitating effects of transcranial direct current stimulation on motor imagery brain-computer interface with robotic feedback for stroke rehabilitation

OBJECTIVE: To investigate the efficacy and effects of transcranial direct current stimulation (tDCS) on motor imagery brain-computer interface (MI-BCI) with robotic feedback for stroke rehabilitation. DESIGN: A sham-controlled, randomized controlled trial. SETTING: Patients recruited through a hospital stroke rehabilitation program. PARTICIPANTS: Subjects (N=19) who incurred a stroke 0.8 to 4.3 years prior, with moderate to severe upper extremity functional impairment, and passed BCI screening. INTERVENTIONS: Ten sessions of 20 minutes of tDCS or sham before 1 hour of MI-BCI with robotic feedback upper limb stroke rehabilitation for 2 weeks. Each rehabilitation session comprised 8 minutes of evaluation and 1 hour of therapy. MAIN OUTCOME MEASURES: Upper extremity Fugl-Meyer Motor Assessment (FMMA) scores measured end-intervention at week 2 and follow-up at week 4, online BCI accuracies from the evaluation part, and laterality coefficients of the electroencephalogram (EEG) from the therapy part of the 10 rehabilitation sessions. RESULTS: FMMA score improved in both groups at week 4, but no intergroup differences were found at any time points. Online accuracies of the evaluation part from the tDCS group were significantly higher than those from the sham group. The EEG laterality coefficients from the therapy part of the tDCS group were significantly higher than those of the sham group. CONCLUSIONS: The results suggest a role for tDCS in facilitating motor imagery in stroke.

Reinforcing effects of graphene oxide on portland cement paste

Abstract: In this experimental study, the reinforcing effects of graphene oxide (GO) on portland cement paste are investigated. It is discovered that the introduction of 0.03% by weight GO sheets into the cement paste can increase the compressive strength and tensile strength of the cement composite by more than 40% due to the reduction of the pore structure of the cement paste. Moreover, the inclusion of the GO sheets enhances the degree of hydration of the cement paste. However, the workability of the GO-cement composite becomes somewhat reduced. The overall results indicate that GO could be a promising nanofillers for reinforcing the engineering properties of portland cement paste.

Effect of retinal image defocus on the thickness of the human choroid

PURPOSE: To describe the time-course and amplitude of changes to sub-foveal choroidal thickness (SFCT) induced by imposed hyperopic and myopic retinal defocus and to compare the responses in emmetropic and myopic subjects. METHODS: Twelve East Asian subjects (age: 18-34 years; six were emmetropic and six had myopia between -2.00 and -5.00 dioptres (D)) viewed a distant target (video movie at 6 m) for 60 min on two separate occasions while optical coherence tomography (OCT) images of the choroid were taken in both eyes every 5 min to monitor SFCT. On each occasion, one eye was optimally corrected for distance with a contact lens while the other eye wore a contact lens imposing either 2.00 D hyperopic or 2.00 D myopic retinal defocus. RESULTS: Baseline SFCT in myopic eyes (mean ± S.D.): 256 ± 42 μm was significantly less than in emmetropic eyes (423 ± 62 μm; p < 0.01) and was correlated with magnitude of myopia (-39 μm per dioptre of myopia, R(2) = 0.67: p < 0.01). Repeated measures anova (General Linear Model) analysis revealed that in both subject groups, 2.00 D of myopic defocus caused a rapid increase in SFCT in the defocussed eye (significant by 10 min, increasing to approximately 20 μm within 60 min: p < 0.01), with little change in the control eye. In contrast, 2.00 D of hyperopic defocus caused a decrease in SFCT in the experimental eye (significant by 20-35 min. SFCT decreased by approximately 20 μm within 60 min: p < 0.01) with little change in the control eye. CONCLUSIONS: Small but significant changes in SFCT (5-8%) were caused by retinal defocus. SFCT increased within 10 min of exposure to 2.00 D of monocular myopic defocus, but decreased more slowly in response to 2.00 D of monocular hyperopic defocus. In our relatively small sample we could detect no difference in the magnitude of changes to SFCT caused by defocus in myopic eyes compared to emmetropic eyes.

Self-assembly of monolayered lipid membranes for surface-coating of a nanoconfined Bombyx mori silk fibroin film

Regenerated Bombyx mori (B. mori) silk fibroin is a type of widely used biomaterial. The β-sheet structure of it after methanol treatment provides water-insolubility and mechanical stability while on the other side leads to a hydrophobic surface which is less preferred by biological systems. In this work we prepare a novel type of nanoconfined silk fibroin film with a thickness below 100 nm. The film has a flat while hydrophobic surface because of its β-sheet structure due to the z-direction confinement during formation. Different types of lipid monolayers, DOPC, DPPC and MO, are assembled on the silk film surface. The lipid coating, especially the DPPC membrane, provides a much smoother and more hydrophilic surface due to the gel phase tails of the lipids, in comparison with the DOPC and MO ones which are in a liquid phase and have a much stronger interfacial association between silk film surface and lipid tails. Such a lipid coating preserves the biocompatibility and cellular affinity of the silk film which promises potential applications as surface coatings for materials for biological use.

A new two-stage fuzzy inference system-based approach to prioritize failures in failure mode and effect analysis

This paper presents a new Fuzzy Inference System (FIS)-based Risk Priority Number (RPN) model for the prioritization of failures in Failure Mode and Effect Analysis (FMEA). In FMEA, the monotonicity property of the RPN scores is important. To maintain the monotonicity property of an FIS-based RPN model, a complete and monotonically-ordered fuzzy rule base is necessary. However, it is impractical to gather all (potentially a large number of) fuzzy rules from FMEA users. In this paper, we introduce a new two-stage approach to reduce the number of fuzzy rules that needs to be gathered, and to satisfy the monotonicity property. In stage-1, a Genetic Algorithm (GA) is used to search for a small set of fuzzy rules to be gathered from FMEA users. In stage-2, the remaining fuzzy rules are deduced approximately by a monotonicity-preserving similarity reasoning scheme. The monotonicity property is exploited as additional qualitative information for constructing the FIS-based RPN model. To assess the effectiveness of the proposed approach, a real case study with information collected from a semiconductor manufacturing plant is conducted. The outcomes indicate that the proposed approach is effective in developing an FIS-based RPN model with only a small set of fuzzy rules, which is able to satisfy the monotonicity property for prioritization of failures in FMEA.

A new fuzzy peer assessment methodology for cooperative learning of students

In this paper, a new fuzzy peer assessment methodology that considers vagueness and imprecision of words used throughout the evaluation process in a cooperative learning environment is proposed. Instead of numerals, words are used in the evaluation process, in order to provide greater flexibility. The proposed methodology is a synthesis of perceptual computing (Per-C) and a fuzzy ranking algorithm. Per-C is adopted because it allows uncertainties of words to be considered in the evaluation process. Meanwhile, the fuzzy ranking algorithm is deployed to obtain appropriate performance indices that reflect a student's contribution in a group, and subsequently rank the student accordingly. A case study to demonstrate the effectiveness of the proposed methodology is described. Implications of the results are analyzed and discussed. The outcomes clearly demonstrate that the proposed fuzzy peer assessment methodology can be deployed as an effective evaluation tool for cooperative learning of students.

Uso do metformin em mulheres obesas com a síndrome dos ovários policísticos

Resumo não disponível.

Internacionalização e nível de caixas das empresas : evidência do Brasil e México

Estendemos estudos anteriores a cerca do nível de caixa e seus determinantes, analisando a relação entre grau de internacionalização e nível de caixa das empresas. Diferente das empresas domésticas, as empresas internacionalizadas possuem mais oportunidades de investimento e enfrentam mais adversidades nos seus negócios. Utilizamos uma amostra de empresas de capital aberto não financeiras do Brasil e do México, para o período de 2006 a 2010. Regressões em painel com efeitos fixos foram utilizadas. Encontramos evidências de que o grau de internacionalização é um determinante de caixa e que o nível de caixa aumenta de forma quadrática à medida que o grau de internacionalização da empresa aumenta. As empresas brasileiras pagadoras de dividendos seguram mais caixa, mas que esse efeito não se aplica para empresas mexicanas. Além disso, o comportamento encontrado para as empresas brasileiras e mexicanas foi diferente de empresas norte-americanas, estudadas por Chiang e Wang (2011). Por fim, no período antes da crise, as empresas seguraram menos caixa em seus balanços.

Female senior managers in the Brazilian finance industry: a journey towards success

No nível global, a representação de líderes de sexo feminino nas empresas muitas vezes ainda se dá em números baixos em termos de percentagem. Particularmente em finanças, esses registros estão abaixo da média da indústria, e a forte concorrência e o ambiente de trabalho dominado pelos homens tornam difícil para as mulheres atingir o topo da pirâmide corporativa (Torres et al., 2013; OECD Better Life Index 2015). Isto pode ser devido a uma falta de equilíbrio trabalho-vida, diferentes estilos de liderança, as mulheres sendo intimidadas, ou a conformidade com estruturas familiares convencionalmente englobadas. No Brasil, os códigos de comportamento tradicionais são muito palpáveis na sociedade do país, embora esta também tenha se beneficiado de uma forte presença de movimentos feministas na segunda metade do século passado (Tate and Yang, 2015; Bowles et al. 2007; Niederle and Vesterlund, 2007). Nos últimos anos, o setor financeiro brasileiro tem crescido, oferecendo maiores oportunidades de emprego e desenvolvimento de carreira nas corporações nacionais e internacionais (Chiang et al., 2013; Bruschini, 2007). Esta dissertação aborda os desafios enfrentados por líderes de sexo feminino do mercado financeiro brasileiro e as suas trajetórias de carreira. Este objetivo será atingido por meio de uma análise de mídia social, focando nos anos de experiência de trabalho das mulheres analisadas, a posição atual delas e se elas têm filhos, bem como com 10 entrevistas semiestruturadas realizadas com executivas no setor financeiro no Brasil. Estas medidas irão abranger lacunas na literatura e consequentes recomendações para pesquisas futuras.

Comparability of results from two leakage models

Objective. The goal of this study was to check whether leakage results of the same specimens measured by 2 different leakage models are similar.Study design. Canine root canals were prepared and filled with cold gutta-percha cones and 1 of 4 sealers (20 canals for each sealer). The 80 specimens were first connected to a fluid transport model where air-bubble movement was measured. The same specimens were later connected to a glucose penetration model where the concentration of glucose was measured. In both models, a headspace pressure of 30 kPa was used to accelerate leakage.Results. In both models, 4 sealers ranked the same regarding the leakage they allowed, and a significant correlation between the results of the 2 models was confined (Spearman test coefficient = 0.65; P = .000001).Conclusion. Under the conditions of this study, leakage results of 80 specimens recorded in the fluid transport model and glucose penetration model were similar.

The Ability of Different Nickel-Titanium Rotary Instruments To Induce Dentinal Damage During Canal Preparation

The purpose of this study was to compare the incidence of dentinal defects (fractures and craze lines) after canal preparation with different nickel-titanium rotary files. Two hundred sixty mandibular premolars were selected. Forty teeth were left unprepared (n = 40). The other teeth were prepared either with manual Flexofiles (n = 20) or with different rotary files systems: ProTaper (Dentsply-Maillefer, Ballaigues, Switzerland), ProFile (Dentsply-Maillefer), SystemGT (Dentsply-Maillefer), or S-ApeX (FKG Dentaire, La Chaux-de-Fonds, Switzerland) (n = 50 each). Roots were then sectioned 3, 6, and 9 mm from the apex and observed under a microscope. The presence of dentinal defects was noted. There was a significant difference in the appearance of defects between the groups (p < 0.05). No defects were found in the unprepared roots and those prepared with hand files and S-ApeX. ProTaper, ProFile, and GT preparations resulted in dentinal defects in 16%, 8%, and 4% of teeth, respectively. Some endodontic preparation methods might damage the root and induce dentinal defects. (J Endod 2009;35:236-238)