877 resultados para Centre for Theoretical Studies
Resumo:
This paper begins with introducing the winding techniques of two superconducting double-pancake coils wound using 2G coated conductors. These winding techniques are able to guarantee a good performance for the superconducting coils. Then the coil critical currents were measured and compared with a simulation model. The results were consistent. Finally the coil AC losses were measured using an experimental circuit including a compensation coil. The simulation results are close to the experiment results. © 2010 IEEE.
Resumo:
An ultra-compact silicon-on-insulator based photonic crystal corner mirror is designed and optimized. A sample is then successfully fabricated with extra losses 1.1 +/- 0.4dB for transverse-electronic (M) polarization for wavelength range of 1510-1630nm.
Resumo:
The past two decades have witnessed concerted efforts by theorists and policy-makers to place civil society at the centre of social, economic and environmental development processes. To this end, policies grounded in a Third Way approach have sought to forge stronger linkages between the state and voluntary community-based organisations. Concepts such as active citizenship, social capital, partnership and sustainability have underpinned this political philosophy, which reflects a movement in development theory and political science away from notions of state-led development and unfettered neo-liberalism. In the Irish context, a series of initiatives have given expression to this new policy agenda, the foremost amongst them the publication of a White Paper in 2000. New local governance structures and development schemes have multiplied since the early 1990s, while the physical planning system has also been modified. All this has taken place against the backdrop of unprecedented economic development and social change precipitated by the ‘Celtic Tiger’.This thesis examines the interaction between community organisations, state institutions and other actors in development processes in East Cork. It focuses upon place-based community organisations, who seek to represent the interests of their particular localities. A case study approach is employed to explore the realpolitik of local development and to gauge the extent to which grassroots community organisations wield influence in determining the development of their communities. The study concludes that the transfer of decision-making power to community organisations has been more illusory than real and that, in practical terms, such groups remain marginal in the circuits of power. However, the situation of community organisations operating in different geographical locales cannot be reduced to an overarching theoretical logic. The case studies show that the modus operandi of community groups varies considerably and can be influenced by specific local geographies, events and personalities.
Resumo:
Density functional calculations, using B3LPY/6-31G(d) methods, have been used to investigate the conformations and vibrational (Raman) spectra of a series of long-chain, saturated fatty acid methyl esters (FAMEs) with the formula CH2nO2 (n = 5-21) and two series of unsaturated FAMEs. The calculations showed that the lowest energy conformer within the saturated FAMEs is the simple (all-trans) structure and, in general, it was possible to reproduce experimental data using calculations on only the all-trans conformer. The only exception was C6H12O2, where a second low-lying conformer had to be included in order to correctly simulate the experimental Raman spectrum. The objective of the work was to provide theoretical justification for the methods that are commonly used to determine the properties of the fats and oils, such as chain length and degree of unsaturation, from experimental Raman data. Here it is shown that the calculations reproduce the trends and calibration curves that are found experimentally and also allow the reasons for the failure of what would appear to be rational measurements to be understood. This work shows that although the assumption that each FAME can simply be treated as a collection of functional groups can be justified in some cases, many of the vibrational modes are complex motions of large sections of the molecules and thus would not be expected to show simple linear trends with changes in structure, such as increasing chain length and/or unsaturation. Simple linear trends obtained from experimental data may thus arise from cancellation of opposing effects, rather than reflecting an underlying simplicity.
Resumo:
The band structure of CdI has been calculated using a modified semi-empirical tight-binding method and the results obtained have been compared with both angularly averaged and angularly resolved photoemission spectra. The theoretically computed density of states distribution is in excellent agreement with angularly averaged results and all the main features observed experimentally are reproduced in the theory. Angularly resolved spectra have been used to draw up energy band dispersion curves directly and agreement with calculated bands in both the Gamma M and Gamma K directions of the Brillouin zone is good.
Resumo:
Nitrogen is one of the most common impurities in diamond. On a substitutional site it acts as a deep donor, approximately 1.7 eV below the conduction band. Irradiation of nitrogen containing diamond and subsequent annealing creates the nitrogen vacancy centre, which has recently attracted much attention for quantum information processing application. Another possible product of irradiation and annealing of nitrogen containing diamond is interstitial nitrogen. Presumably, a mobile carbon interstitial migrates to a substitutional nitrogen to produce an interstitial nitrogen complex which may or may not be mobile. The configuration(s) of interstitial nitrogen related defects (e.g. bond centred, [001]-split) are not known. An infra-red (IR) absorption peak at 1450 cm-1 labelled H1a has been associated with an nitrogen interstitial complex. [1] Theoretical modelling suggested that this IR local mode is due to a bond centred nitrogen interstitial [2]. However, more recent modelling [3] suggests that this defect is mobile at temperatures were H1a is stable and instead assign H1a to two nitrogen atoms occupying a single lattice site in a [001]-split configuration. To date no electron paramagnetic resonance (EPR) spectra have been conclusively associated with an interstitial nitrogen defect.
In this study we present data from new EPR and optical absorption studies in combination with uniaxial stress of nitrogen interstitial related defects in electron irradiated and annealed nitrogen doped diamond. These measurements yield symmetry information about the defects allowing us to determine which of the proposed models are possible. EPR spectra of nitrogen interstitial related defects in samples isotopically enriched with 15N are reported and we show that these explain the lack of previous EPR data for these defects. Correlations between the IR absorbance and the integrated intensity of the new EPR defects are studied for varying irradiation doses and annealing temperatures.
Resumo:
This article offers a history of the working practices of the Birmingham Centre for Contemporary Cultural Studies. Based on extensive interviews with former members and on research into a new archive of the Centre, housed in the Cadbury Research Library, University of Birmingham, it argues that cultural studies as practised in the 1970s was always a heterogeneous subject. The CCCS was heavily influenced by the events of 1968 when it tried to develop a new type of radical and collaborative research and teaching agenda. Despite Stuart Hall's efforts to impose a focused link between politics and academic practice, the agenda soon gave way to a series of diverse and fruitful initiatives associated with the ‘sub-groups’ model of research.
Resumo:
In Part I, theoretical derivations for Variational Monte Carlo calculations are compared with results from a numerical calculation of He; both indicate that minimization of the ratio estimate of Evar , denoted EMC ' provides different optimal variational parameters than does minimization of the variance of E MC • Similar derivations for Diffusion Monte Carlo calculations provide a theoretical justification for empirical observations made by other workers. In Part II, Importance sampling in prolate spheroidal coordinates allows Monte Carlo calculations to be made of E for the vdW molecule var He2' using a simplifying partitioning of the Hamiltonian and both an HF-SCF and an explicitly correlated wavefunction. Improvements are suggested which would permit the extension of the computational precision to the point where an estimate of the interaction energy could be made~
Resumo:
Cette recherche porte sur des questions relatives à la conception des interfaces humain-ordinateur. Elle s’inscrit dans le courant des recherches sur l’utilisabilité et elle s’intéresse particulièrement aux approches centrées sur l’utilisateur. Nous avons été très souvent témoin des difficultés éprouvées par les utilisateurs dans l’usage de certaines interfaces interactives et nous considérons que ces difficultés découlent d’un problème de design. Le design d’interface doit être basé sur les besoins de l’utilisateur dans le cadre de ses activités, dont les caractéristiques devaient être bien comprises et bien prises en considération pour mener à la conception d’interfaces qui respectent les critères d’utilisabilité. De plus, la communauté des chercheurs ainsi que l’industrie admettent maintenant que pour améliorer le design, il est crucial de développer les interfaces humain-ordinateur au sein d’une équipe multidisciplinaire. Malgré les avancées significatives dans le domaine du design centrées sur l’utilisateur, les visées annoncées sont rarement réalisées. La problématique étudiée nous a conduit à poser la question suivante : En tant que designer d’une équipe multidisciplinaire de conception, comment modifier la dynamique de collaboration et créer les conditions d’une conception véritablement centrée sur l’interaction humain-ordinateur ? Notre démarche de recherche a été guidée par l’hypothèse voulant que l’activité de design puisse être le moyen de faciliter la création d’un langage commun, des échanges constructifs entre les disciplines, et une réflexion commune centrée sur l’utilisateur. La formulation de cette hypothèse nous a mené à réfléchir sur le rôle du designer. Pour mener cette recherche, nous avons adopté une méthodologie mixte. Dans un premier temps, nous avons utilisé une approche de recherche par projet (recherche-projet) et notre fonction était celle de designer-chercheur. La recherche-projet est particulièrement appropriée pour les recherches en design. Elle privilégie les méthodes qualitatives et interprétatives ; elle étudie la situation dans sa complexité et de façon engagée. Nous avons effectué trois études de cas successives. L’objectif de la première étude était d’observer notre propre rôle et nos interactions avec les autres membres de l’équipe de projet pendant le processus de design. Dans la seconde étude, notre attention a été portée sur les interactions et la collaboration de l’équipe. Nous avons utilisé le processus de design comme méthode pour la construction d’un langage commun entre les intervenants, pour enrichir les réflexions et pour favoriser leur collaboration menant à redéfinir les objectifs du projet. Les limites de ces deux cas nous ont conduit à une intervention différente que nous avons mise en œuvre dans la troisième étude de cas. Cette intervention est constituée par la mise en place d’un atelier intensif de conception où les intervenants au projet se sont engagés à développer une attitude interdisciplinaire permettant la copratique réflexive pour atteindre les objectifs d’un projet de construction d’un site web complexe centré sur l’utilisateur. L’analyse et l’interprétation des données collectées de ces trois études de cas nous ont conduit à créer un modèle théorique de conception d’interface humain-ordinateur. Ce modèle qui informe et structure le processus de design impliquant une équipe multidisciplinaire a pour objectif d’améliorer l’approche centrée sur l’utilisateur. Dans le cadre de ce modèle, le designer endosse le rôle de médiateur en assurant l’efficacité de la collaboration de l’équipe. Dans un deuxième temps, afin de valider le modèle et éventuellement le perfectionner, nous avons utilisé une approche ethnographique comportant des entrevues avec trois experts dans le domaine. Les données des entrevues confirment la validité du modèle ainsi que son potentiel de transférabilité à d’autres contextes. L’application de ce modèle de conception permet d’obtenir des résultats plus performants, plus durables, et dans un délai plus court.