Understanding the Flash Sintering of Rare-Earth-Doped Ceria for Solid Oxide Fuel Cell

A novel electrical current applied technique known as flash sintering has been applied to rapidly (within 10 min) densify electrolytes including Ce_0.8Gd_0.2O_1.9 (GDC20), Ce_0.9Gd_0.1O_1.95 (GDC10), and Ce_0.8Sm_0.2O_1.9 (SDC20) for application in Solid Oxide Fuel Cells (SOFCs). The densification temperature for the three electrolytes was 554°C, 635°C, and 667°C, respectively, which is far below conventional sintering temperatures. All specimens after flash sintering maintained the pure fluorite structure and exhibited a well-densified microstructure. To investigate the flash-sintering mechanism, we have applied Joule heating effect with blackbody radiation theory, and found that this theory could reasonably interpret the flash-sintering phenomenon by matching theoretically calculated temperature with the real temperature. More importantly, one of the materials inherent properties, the electronic conductivity, has been found correlated with the onset of flash sintering, which indicates that the electrons and holes are the primary current carriers during the start of flash-sintering process. As a result, potential densification mechanisms have been discussed in terms of spark plasma discharge.

Duration-dependent effects of the BDNF Val66Met polymorphism on anodal tDCS induced motor cortex plasticity in older adults: a group and individual perspective

The brain derived neurotrophic factor (BDNF) Val66Met polymorphism and stimulation duration are thought to play an important role in modulating motor cortex plasticity induced by non-invasive brain stimulation (NBS). In the present study we sought to determine whether these factors interact or exert independent effects in older adults. Fifty-four healthy older adults (mean age = 66.85 years) underwent two counterbalanced sessions of 1.5 mA anodal transcranial direct current stimulation (atDCS), applied over left M1 for either 10 or 20 min. Single pulse transcranial magnetic stimulation (TMS) was used to assess corticospinal excitability (CSE) before and every 5 min for 30 min following atDCS. On a group level, there was an interaction between stimulation duration and BDNF genotype, with Met carriers (n = 13) showing greater post-intervention potentiation of CSE compared to Val66Val homozygotes homozygotes (n = 37) following 20 min (p = 0.002) but not 10 min (p = 0.219) of stimulation. Moreover, Met carriers, but not Val/Val homozygotes, exhibited larger responses to TMS (p = 0.046) after 20 min atDCS, than following 10 min atDCS. On an individual level, two-step cluster analysis revealed a considerable degree of inter-individual variability, with under half of the total sample (42%) showing the expected potentiation of CSE in response to atDCS across both sessions. Intra-individual variability in response to different durations of atDCS was also apparent, with one-third of the total sample (34%) exhibiting LTP-like effects in one session but LTD-like effects in the other session. Both the inter-individual (p = 0.027) and intra-individual (p = 0.04) variability was associated with BDNF genotype. In older adults, the BDNF Val66Met polymorphism along with stimulation duration appears to play a role in modulating tDCS-induced motor cortex plasticity. The results may have implications for the design of NBS protocols for healthy and diseased aged populations.

Optimising drug solubilisation in amorphous polymer dispersions: rational selection of hot-melt extrusion processing parameters

The aim of this article was to construct a T–ϕ phase diagram for a model drug (FD) and amorphous polymer (Eudragit® EPO) and to use this information to understand the impact of how temperature–composition coordinates influenced the final properties of the extrudate. Defining process boundaries and understanding drug solubility in polymeric carriers is of utmost importance and will help in the successful manufacture of new delivery platforms for BCS class II drugs. Physically mixed felodipine (FD)–Eudragit® EPO (EPO) binary mixtures with pre-determined weight fractions were analysed using DSC to measure the endset of melting and glass transition temperature. Extrudates of 10 wt% FD–EPO were processed using temperatures (110°C, 126°C, 140°C and 150°C) selected from the temperature–composition (T–ϕ) phase diagrams and processing screw speed of 20, 100 and 200rpm. Extrudates were characterised using powder X-ray diffraction (PXRD), optical, polarised light and Raman microscopy. To ensure formation of a binary amorphous drug dispersion (ADD) at a specific composition, HME processing temperatures should at least be equal to, or exceed, the corresponding temperature value on the liquid–solid curve in a F–H T–ϕ phase diagram. If extruded between the spinodal and liquid–solid curve, the lack of thermodynamic forces to attain complete drug amorphisation may be compensated for through the use of an increased screw speed. Constructing F–H T–ϕ phase diagrams are valuable not only in the understanding drug–polymer miscibility behaviour but also in rationalising the selection of important processing parameters for HME to ensure miscibility of drug and polymer.

Molecular Medicine and Molecular Pathology for Hematologists:II. Lets go Techno; Principles of the Molecular Technologies and their Applications in Haematology

Molecular techniques have a key role to play in laboratory and clinical haematology. Restriction enzymes allow nucleic acids to be reduced in size for subsequent analysis. In addition they allow selection of specific DNA or RNA sequences for cloning into bacterial plasmids. These plasmids are naturally occuring DNA molecules which reside in bacterial cells. They can be manipulated to act as vehicles or carriers for biologically and medically important genes, allowing the production of large amounts of cloned material for research purposes or to aid in the production of medically important recombinant molecules such as insulin. As acquired or inherited genetic changes are implicated in a wide range of haematological diseases, it is necessary to have highly specific and sensitive assays to detect these mutations. Most of these techniques rely on nucleic acid hybridisation, benefitting from the ability of DNA or RNA to bind tighly to complimentary bases in the nucleic acid structure. Production of artificial DNA molecules called probes permits nucleic acid hybridiation assays to be performed, using the techniques of southern blotting or dot blot analysis. In addition the base composition of any gene or region of DNA can be determined using DNA sequencing technology. The advent of the polymerase chain reaction (PCR) has revolutionised all aspects of medicine, but has particular relevance in haematology where easy access to biopsy material provides a wealth of material for analysis. PCR permits quick and reliable manipulation of sample material and its ability to be automated makes it an ideal tool for use in the haematology laboratory.

Beam division multiple access transmission for massive MIMO communications

We study multicarrier multiuser multiple-input multiple-output (MU-MIMO) systems, in which the base station employs an asymptotically large number of antennas. We analyze a fully correlated channel matrix and provide a beam domain channel model, where the channel gains are independent of sub-carriers. For this model, we first derive a closed-form upper bound on the achievable ergodic sum-rate, based on which, we develop asymptotically necessary and sufficient conditions for optimal downlink transmission that require only statistical channel state information at the transmitter. Furthermore, we propose a beam division multiple access (BDMA) transmission scheme that simultaneously serves multiple users via different beams. By selecting users within non-overlapping beams, the MU-MIMO channels can be equivalently decomposed into multiple single-user MIMO channels; this scheme significantly reduces the overhead of channel estimation, as well as, the processing complexity at transceivers. For BDMA transmission, we work out an optimal pilot design criterion to minimize the mean square error (MSE) and provide optimal pilot sequences by utilizing the Zadoff-Chu sequences. Simulations demonstrate the near-optimal performance of BDMA transmission and the advantages of the proposed pilot sequences.

Markers of vitamin D exposure and oesophageal cancer risk: a systematic review and meta-analysis.

Vitamin D has been associated with reduced risk of many cancers, but evidence for oesophageal cancer is mixed. To clarify the role of Vitamin D, we performed a systematic review and meta-analysis to evaluate the association of Vitamin D exposures and oesophageal neoplasia, including adenocarcinoma, squamous cell carcinoma (SCC), Barrett's oesophagus and squamous dysplasia. Ovid MEDLINE, EMBASE and Web of Science were searched from inception to September 2015. Fifteen publications in relation to circulating 25-hydroxyvitamin D (n=3), Vitamin D intake (n=4), UVB exposure (n=1), and genetic factors (n=7) were retrieved. Higher 25-OHD was associated with increased risk of cancer (adenocarcinoma or SCC, OR=1.39;95%CI:1.04-1.74), with the majority of participants coming from China. No association was observed between Vitamin D intake and risk of cancer overall (OR=1.03;0.65-1.42); however, a non-significantly increased risk for adenocarcinoma (OR=1.45;0.65-2.24) and non-significantly decreased risk for SCC (OR=0.80;0.48-1.12) were observed. One study reported a decreased risk of adenocarcinoma with higher UVB exposure. A decreased risk was found for VDR haplotype rs2238135(G)/rs1989969(T) carriers, OR=0.45;0.00-0.91, and a suggestive association was observed for rs2107301. No consistent associations were observed between Vitamin D exposures and occurrence of oesophageal lesions. Further adequately powered, well-designed studies are needed before conclusions can be made.

Selective Multi-Carrier Index Keying OFDM: Error Propagation Rate with Moment Generating Function

We propose a new selective multi-carrier index keying in orthogonal frequency division multiplexing (OFDM) systems that opportunistically modulate both a small subset of sub-carriers and their indices. Particularly, we investigate the performance enhancement in two cases of error propagation sensitive and compromised deviceto-device (D2D) communications. For the performance evaluation, we focus on analyzing the error propagation probability (EPP) introducing the exact and upper bound expressions on the detection error probability, in the presence of both imperfect and perfect detection of active multi-carrier indices. The average EPP results in closedform are generalized for various fading distribution using the moment generating function, and our numerical results clearly show that the proposed approach is desirable for reliable and energy-efficient D2D applications.

Passive Intermodulation of Analog and Digital Signals on Transmission Lines with Distributed Nonlinearities: Modelling and Characterization

Passive intermodulation (PIM) often limits the performance of communication systems with analog and digitally-modulated signals and especially of systems supporting multiple carriers. Since the origins of the apparently multiple physical sources of nonlinearity causing PIM are not fully understood, the behavioral models are frequently used to describe the process of PIM generation. In this paper a polynomial model of memoryless nonlinearity is deduced from PIM measurements of a microstrip line with distributed nonlinearity with two-tone CW signals. The analytical model of nonlinearity is incorporated in Keysight Technology’s ADS simulator to evaluate the metrics of signal fidelity in the receive band for analog and digitally-modulated signals. PIM-induced distortion and cross-band interference with modulated signals are compared to those with two-tone CW signals. It is shown that conventional metrics can be applied to quantify the effect of distributed nonlinearities on signal fidelity. It is found that the two-tone CW test provides a worst-case estimate of cross-band interference for two-carrier modulated signals whereas with a three-carrier signal PIM interference in the receive band is noticeably overestimated. The simulated constellation diagrams for QPSK signals demonstrate that PIM interference exhibits the distinctive signatures of correlated distortion and this indicates that there are opportunities for mitigating PIM interference and that PIM interference cannot be treated as noise. One of the interesting results is that PIM distortion on a transmission line results in asymmetrical regrowth of output PIM interference for modulated signals.

Polynomial Model for High-Order and Multi-Carrier Passive Intermodulation Products

Passive intermodulation (PIM) often limits the performance of communication systems, particularly in the presence of multiple carriers. Since the origins of the apparently multiple physical sources of nonlinearity causing PIM in distributed circuits are not fully understood, the behavioural models are frequently employed to describe the process of PIM generation. In this paper, a memoryless nonlinear polynomial model, capable of predicting high-order multi-carrier intermodulation products, is deduced from the third-order two-tone PIM measurements on a microstrip transmission line with distributed nonlinearity. The analytical model of passive distributed nonlinearity is implemented in Keysight Technology’s ADS simulator to evaluate the adjacent band power ratio for three-tone signals. The obtained results suggest that the costly multi-carrier test setups can possibly be replaced by a simulation tool based on the properly retrieved nonlinear polynomial model.

Coordination chemistry for information acquisition and processing

In the 21st century, information has become the most valuable resource that is available to modern societies. Thus, great efforts have been made to develop new information processing and storage techniques. Chemistry can offer a wide variety of computing paradigms that are closely related to the natural processes found in living organisms (e.g., in the nervous systems of animals). Moreover, these phenomena cannot be reproduced easily by solely using silicon-based technology. Other great advantages of molecular-scale systems include their simplicity and the diversity of interactions that occur among them. Thus, devices constructed using chemical entities may be programmed to deal with different information carriers (photons, electrons, ions, and molecules), possibly surpassing the capabilities of classic electronic circuits.

Pine wilt disease: global issues, trade and economic impact

Pine wilt disease (PWD) is perhaps the most serious threat to pine forests worldwide. Since it´s discovery in the early XXth century by Japanese forest researchers, and the relationship with its causative agent, the pinewood nematode (PWN) Bursaphelenchus xylophilus, in the 1970s, PWD has wreaked havoc wherever it appears. Firstly in the Far East (Japan, China and Korea) and now, more recently in 1999, in the EU (Portugal). The forest sector in Portugal plays a major role in the Portuguese economy with a 12% contribution to the industrial gross domestic product, 3.2% of the gross domestic product, 10% of foreign trade and 5% of national employment. Maritime pine (Pinus pinaster) is one of the most important pine productions, and industrial activity, such as the production of wood and resin, as well as coastal protection associated with sand dunes. Also, stone pine (Pinus pinea) plays an important role in the economy with a share derived from the exports of high-quality pineon seed. Thus, the tremendous economical and ecological impact of the introduction of a pest and pathogen such as the PWN, although as far as is known, the only species susceptible to the nematode is maritime pine. Immediately following detection, the research team involved (Univ. Évora, INIAP) informed the national plant quarantine and forest authorities, which relayed the information to Brussels and the appropriate EU authorities. A task force (GANP), followed by a national program (PROLUNP) was established. Since then, national surveys have been taking place, involving MADRP (Ministry of Agriculture), the University of Évora and several private corporations (e.g. UNAC). Forest growers in the area are particularly interested and involved since the area owned by the growers organizations totals 700 000 ha, largely affected by PWD. Detection of the disease has led to serious consequences and restrictions regarding exploration and commercialization of wood. A precautionary phytosanitary strip, 3 km-wide, has been recently (2007) established surrounding the affected area. The Portuguese government, through its national program PROLUNP, has been deeply involved since 1999, and in conjunction with the EU (Permanent Phytosanitary Committee, and FVO) and committed to controlling this nematode and the potential spread to the rest of the country and to the rest of the EU. The global impact of the presence of Bursaphelenchus xylophilus or the threat of its introduction and the resulting pine wilt disease in forested areas in different parts of the world is of increasing concern economically. The concern is exacerbated by the prevailing debate on climate change and the putative impact this could have on the vulnerability of the world’s pine forests to this disease. The scientific and regulatory approach taken in different jurisdictions to the threat of pine wilt disease varies from country to country depending on the perceived vulnerability of their pine forests to the disease and/or to the economic cost due to lost trade in wood products. Much of the research surrounding pine wilt disease has been located in the northern hemisphere, especially in southern Europe and in the warmer, coastal, Asian countries. However, there is an increased focus on this problem also in those countries in the southern hemisphere where plantations of susceptible pine have been established over the years. The forestry sector in Australia and New Zealand are on “high alert” for this disease and are practicing strict quarantine procedures at all ports of entry for wood products. As well, there is heightened awareness, as there is worldwide, for the need to monitor wood packaging materials for all imported goods. In carrying out the necessary monitoring and assessment of products for B. xylophilus and its vectors substantial costs are incurred especially when decisions have to be made rapidly and regardless of whether the outcome is positive or negative. Australia’s response recently to the appearance of some dying pines in a plantation illustrated the high sensitivity of some countries to this disease. Some $200,000 was spent on the assessment in order to save a potential loss of millions of dollars to the disease. This rapid, co-ordinated response to the report was for naught, because once identified it was found not to be B. xylophilus. This illustrates the particular importance of taking the responsibility at all levels of management to secure the site and the need of a rapid, reliable diagnostic method for small nematode samples for use in the field. Australia is particularly concerned about the vulnerability of its 1million hectares of planted forests, 80% of which are Pinus species, to attack from incursions of one or more species of the insect vector. Monochamus alternatus incursions in wood pallets have been reported from Brisbane, Queensland. The climate of this part of Australia is such that the Pinus plantations are particularly vulnerable to the potential outcome of such incursions, and the state of Queensland is developing a risk management strategy and a proactive breeding programme in response to this putative threat. New Zealand has 1.6 million hectares of planted forests and 89% of the commercial forest is Pinus radiata. Although the climate where these forests are located tends to be somewhat cooler than that in Australia the potential for establishment and development of the disease in that country is believed to be high. The passage alone of 200,000 m³/year of wood packaging through New Zealand ports is itself sufficient to require response. The potential incursion of insect vectors of pinewood nematode through the port system is regarded as high and is monitored carefully. The enormous expansion of global trade and the continued use of unprocessed/inadequately-processed wood for packaging purposes is a challenge for all trading nations as such wood packaging material often harbours disease or pest species. The extent of this problem is readily illustrated by the expanding economies and exports of countries in south-east Asia. China. Japan and Korea have significant areas of forestland infested with B. xylophilus. These countries too are among the largest exporting countries of manufactured goods. Despite the attempts of authorities to ensure that only properly treated wood is used in the crating and packaging of goods B. xylophilus and/or its insect vector infested materials is being recorded at ports worldwide. This reminds us, therefore, of the ease with which this nematode pest can gain access to forest lands in new geographic locations through inappropriate use, treatment or monitoring of wood products. It especially highlights the necessity to find an alternative to using low-grade lumber for packaging purposes. Lest we should believe that all wood products are always carriers of B. xylophilus and its vectors, it should be remembered that international trade of all kinds has occurred for thousands of years and that lumber-born pests and diseases do not have worldwide distribution. Other physico-biological factors have a significant role in the occurrence, establishment and sustainability of a disease. The question is often raised as to why the whole of southern Europe doesn’t already have B. xylophilus and pine wilt disease. European countries have traded with countries that are infested with B. xylophilus for hundreds of years. Turkey is an example of a country that appears to be highly vulnerable to pine wilt disease due to its extensive forests in the warm, southern region where the vector, Monochamus galloprovincialis, occurs. However, there is no record of the presence of B. xylophilus occurring there despite the importation of substantial quantities of wood from several countries In many respects, Portugal illustrates both the challenge and the dilemma. In recent times B. xylophilus was discovered there in the warm coastal region. The research, administrative and quarantine authorities responded rapidly and B. xylophilus appears to have been confined to the region in which it was found. The rapid response would seem to have “saved the day” for Portugal. Nevertheless, it raises again the long-standing questions, how long had B. xylophilus been in Portugal before it was found? If Lisbon was the port of entry, which seems very likely, why had B. xylophilus not entered Lisbon many years earlier and established populations and the pine wilt disease? Will the infestation in Portugal be sustainable and will it spread or will it die out within a few years? We still do not have sufficient understanding of the biology of this pest to know the answers to these questions.

Projecto de receptores integrados de banda larga

O presente trabalho tem como objectivo o estudo e projecto de receptores optimizados para sistemas de comunicações por fibra óptica de muito alto débito (10Gb/s e 40Gb/s), com a capacidade integrada de compensação adaptativa pós-detecção da distorção originada pela característica de dispersão cromática e de polarização do canal óptico. O capítulo 1 detalha o âmbito de aplicabilidade destes receptores em sistemas de comunicações ópticas com multiplexagem no comprimento de onda (WDM) actuais. O capítulo apresenta ainda os objectivos e principais contribuições desta tese. O capítulo 2 detalha o projecto de um amplificador pós-detecção adequado para sistemas de comunicação ópticos com taxa de transmissão de 10Gb/s. São discutidas as topologias mais adequadas para amplificadores pós detecção e apresentados os critérios que ditaram a escolha da topologia de transimpedância bem como as condições que permitem optimizar o seu desempenho em termos de largura de banda, ganho e ruído. Para além disso são abordados aspectos relacionados com a implementação física em tecnologia monolítica de microondas (MMIC), focando em particular o impacto destes no desempenho do circuito, como é o caso do efeito dos componentes extrínsecos ao circuito monolítico, em particular as ligações por fio condutor do monólito ao circuito externo. Este amplificador foi projectado e produzido em tecnologia pHEMT de Arsenieto de Gálio e implementado em tecnologia MMIC. O protótipo produzido foi caracterizado na fábrica, ainda na bolacha em que foi produzido (on-wafer) tendo sido obtidos dados de caracterização de 80 circuitos protótipo. Estes foram comparados com resultados de simulação e com desempenho do protótipo montado num veículo de teste. O capítulo 3 apresenta o projecto de dois compensadores eléctricos ajustáveis com a capacidade de mitigar os efeitos da dispersão cromática e da dispersão de polarização em sistemas ópticos com débito binário de 10Gb/s e 40Gb/s, com modulação em banda lateral dupla e banda lateral única. Duas topologias possíveis para este tipo de compensadores (a topologia Feed-Forward Equalizer e a topologia Decision Feedback Equaliser) são apresentadas e comparadas. A topologia Feed-Forward Equaliser que serviu de base para a implementação dos compensadores apresentados é analisada com mais detalhe sendo propostas alterações que permitem a sua implementação prática. O capítulo apresenta em detalhe a forma como estes compensadores foram implementados como circuitos distribuídos em tecnologia MMIC sendo propostas duas formas de implementar as células de ganho variável: com recurso à configuração cascode ou com recurso à configuração célula de Gilbert. São ainda apresentados resultados de simulação e experimentais (dos protótipos produzidos) que permitem tirar algumas conclusões sobre o desempenho das células de ganho com as duas configurações distintas. Por fim, o capítulo inclui ainda resultados de desempenho dos compensadores testados como compensadores de um sinal eléctrico afectado de distorção. No capítulo 4 é feita uma análise do impacto da modulação em banda lateral dupla (BLD) em comparação com a modulação em banda lateral única (BLU) num sistema óptico afectado de dispersão cromática e de polarização. Mostra-se que com modulação em BLU, como não há batimento entre portadoras das duas bandas laterais em consequência do processo quadrático de detecção e há preservação da informação da distorção cromática do canal (na fase do sinal), o uso deste tipo de modulação em sistemas de comunicação óptica permite maior tolerância à dispersão cromática e os compensadores eléctricos são muito mais eficientes. O capítulo apresenta ainda resultados de teste dos compensadores desenvolvidos em cenários experimentais de laboratório representativos de sistemas ópticos a 10Gb/s e 40Gb/s. Os resultados permitem comparar o desempenho destes cenários sem e com compensação eléctrica optimizada, para os casos de modulação em BLU e em BLD, e considerando ainda os efeitos da dispersão na velocidade de grupo e do atraso de grupo diferencial. Mostra-se que a modulação BLU em conjunto com compensação adaptativa eléctrica permite um desempenho muito superior á modulação em BLD largamente utilizada nos sistemas de comunicações actuais. Por fim o capítulo 5 sintetiza e apresenta as principais conclusões deste trabalho.

Properties of self-assembled diluted magnetic semiconductor nanostructures

Este trabalho centra-se na investigação da possibilidade de se conseguir um semicondutor magnético diluído (SMD) baseado em ZnO. Foi levado a cabo um estudo detalhado das propriedades magnéticas e estruturais de estruturas de ZnO, nomeadamente nanofios (NFs), nanocristais (NCs) e filmes finos, dopadas com metais de transição (MTs). Foram usadas várias técnicas experimentais para caracterizar estas estruturas, designadamente difracção de raios-X, microscopia electrónica de varrimento, ressonância magnética, SQUID, e medidas de transporte. Foram incorporados substitucionalmente nos sítios do Zn iões de Mn2+ e Co2+ em ambos os NFs e NCs de ZnO. Revelou-se para ambos os iões dopantes, que a incorporação é heterogénea, uma vez que parte do sinal de ressonância paramagnética electrónica (RPE) vem de iões de MTs em ambientes distorcidos ou enriquecidos com MTs. A partir das intensidades relativas dos espectros de RPE e de modificações da superfície, demonstra-se ainda que os NCs exibem uma estrutura core-shell. Os resultados, evidenciam que, com o aumento da concentração de MTs, a dimensão dos NCs diminui e aumentam as distorções da rede. Finalmente, no caso dos NCs dopados com Mn, obteve-se o resultado singular de que a espessura da shell é da ordem de 0.3 nm e de que existe uma acumulação de Mn na mesma. Com o objectivo de esclarecer o papel dos portadores de carga na medição das interacções ferromagnéticas, foram co-dopados filmes de ZnO com Mn e Al ou com Co e Al. Os filmes dopados com Mn, revelaram-se simplesmente paramagnéticos, com os iões de Mn substitucionais nos sítios do Zn. Por outro lado, os filmes dopados com Co exibem ferromagnetismo fraco não intrínseco, provavelmente devido a decomposição spinodal. Foram ainda efectuados estudos comparativos com filmes de ligas de Zn1-xFexO. Como era de esperar, detectaram-se segundas fases de espinela e de óxido de ferro nestas ligas; todas as amostras exibiam curvas de histerese a 300 K. Estes resultados suportam a hipótese de que as segundas fases são responsáveis pelo comportamento magnético observado em muitos sistemas baseados em ZnO. Não se observou nenhuma evidência de ferromagnetismo mediado por portadores de carga. As experiências mostram que a análise de RPE permite demonstrar directamente se e onde estão incorporados os iões de MTs e evidenciam a importância dos efeitos de superfície para dimensões menores que ~15 nm, para as quais se formam estruturas core-shell. As investigações realizadas no âmbito desta tese demonstram que nenhuma das amostras de ZnO estudadas exibiram propriedades de um SMD intrínseco e que, no futuro, são necessários estudos teóricos e experimentais detalhados das interacções de troca entre os iões de MTs e os átomos do ZnO para determinar a origem das propriedades magnéticas observadas.

Radiation-induced defects in quantum-size structures of A3B5 semiconductors

As estruturas quânticas de semicondutores, nomeadamente baseadas em GaAs, têm tido nos últimos vinte anos um claro desenvolvimento. Este desenvolvimento deve-se principalmente ao potencial tecnológico que estas estruturas apresentam. As aplicações espaciais, em ambientes agressivos do ponto de vista do nível de radiação a que os dispositivos estão sujeitos, motivaram todo o desenrolar de estudos na área dos defeitos induzidos pela radiação. As propriedades dos semicondutores e dos dispositivos de semicondutores são altamente influenciadas pela presença de defeitos estruturais, em particular os induzidos pela radiação. As propriedades dos defeitos, os processos de criação e transformação de defeitos devem ser fortemente alterados quando se efectua a transição entre o semicondutor volúmico e as heteroestruturas de baixa dimensão. Este trabalho teve como principal objectivo o estudo de defeitos induzidos pela radiação em estruturas quânticas baseadas em GaAs e InAs. Foram avaliadas as alterações introduzidas pelos defeitos em estruturas de poços quânticos e de pontos quânticos irradiadas com electrões e com protões. A utilização de várias técnicas de espectroscopia óptica, fotoluminescência, excitação de fotoluminescência e fotoluminescência resolvida no tempo, permitiu caracterizar as diferentes estruturas antes e após a irradiação. Foi inequivocamente constatada uma maior resistência à radiação dos pontos quânticos quando comparados com os poços quânticos e os materiais volúmicos. Esta resistência deve-se principalmente a uma maior localização da função de onda dos portadores com o aumento do confinamento dos mesmos. Outra razão provável é a expulsão dos defeitos dos pontos quânticos para a matriz. No entanto, a existência de defeitos na vizinhança dos pontos quânticos promove a fuga dos portadores dos níveis excitados, cujas funções de onda são menos localizadas, provocando um aumento da recombinação nãoradiativa e, consequentemente, uma diminuição da intensidade de luminescência dos dispositivos. O desenvolvimento de um modelo bastante simples para a estatística de portadores fora de equilíbrio permitiu reproduzir os resultados de luminescência em função da temperatura. Os resultados demonstraram que a extinção da luminescência com o aumento da temperatura é determinada por dois factores: a redistribuição dos portadores minoritários entre os pontos quânticos, o poço quântico e as barreiras de GaAs e a diminuição na taxa de recombinação radiativa relacionada com a dependência, na temperatura, do nível de Fermi dos portadores maioritários.

Pathways of recent fine-grained sediment transport on the central Portuguese continental margin

Com o intuito de estudar as principais vias de transporte de sedimentos finos recentes na zona central da margem continental Oeste Portuguesa, parâmetros geoquímicos, mineralógicos e granulométricos foram analisados em sedimentos superficiais e em matéria particulada colhida em armadilhas de sedimentos e integrados com observações da hidrodinâmica de fundo. Os parâmetros geoquímicos foram também estudados na coluna de sedimentos depositada nos últimos 150 anos e em sedimentos pré-industriais. Os referidos parâmetros determinados foram: concentrações elementares, isótopos estáveis de Pb, teores em materiais litogénicos, carbonato de cálcio e carbono orgânico. Os canhões de Lisboa-Setúbal e Cascais tiveram especial destaque no presente estudo dado que, até à data, encontram-se menos estudados que o Canhão da Nazaré. Os resultados mostram que a distribuição de sedimentos na zona central da margem ocidental Portuguesa é particionada pelos canhões e que a exportação de sedimentos da plataforma para zonas mais profundas da margem é restringida pelas correntes do talude, excepto onde os canhões funcionam como corredores para o transporte de sedimentos. Enquanto no Canhão de Lisboa-Setúbal, e provavelmente no Canhão de Cascais, o transporte de sedimentos até à zona inferior é limitada, provavelmente apenas despoletado por eventos de elevada energia, no Canhão da Nazaré o transporte ao longo do todo o canhão parece eficiente. As zonas superiores dos canhões de Lisboa-Setúbal e Cascais presentemente actuam como armadilhas de sedimentos finos, aprisionando partículas em suspensão provenientes da plataforma adjacente. A introdução directa de sedimentos provenientes das plumas dos rios Tejo e Sado nas zonas superiores dos canhões parece limitada, contudo a resuspensão dos sedimentos do prodelta do Tejo como resultado de ondas de tempestade e ondas de maré interna permite o transporte de sedimentos para os canhões adjacentes. Na plataforma de Lisboa-Setúbal-Sines foram identificadas as assinaturas geoquímicas e mineralógicas de diferentes fontes de sedimentos finos (e.g. estuários do Tejo e Sado, arribas costeiras, lagoas de St. André e Melides). As concentrações elementares pré-industriais são muito semelhantes nos canhões da Nazaré e Lisboa-Setúbal, mas variados graus de enriquecimento antrópico de metais traço estão presentes nos sedimentos recentes. A mais acentuada influência antrópica na última área referida é consistente com a sua proximidade a áreas densamente povoadas e industrializadas e com input de sedimentos originários dos rios Tejo e Sado, potenciais transportadores de partículas poluentes. A dispersão de Pb atmosférico parece também significativa sendo que toda a zona da plataforma continental adjacente aos canhões de Lisboa-Setúbal e Cascais apresenta-se enriquecida. A principal fonte de Pb antrópico identificada através de isótopos estáveis de Pb é consistente com a assinatura das cinzas de incineradoras. No Canhão de Lisboa a imersão de dragados contaminados parece ser também uma potencial importante fonte de metais traço antropogénicos.