Characterisation of the thermodormancy response in the everbearing strawberry 'Everest'

Temperature regimes that induce and ameliorate cropping troughs ("thermodormancy") were evaluated over two seasons for the everbearing strawberry 'Everest'. When plants were exposed to 26 degrees C for 5, 10, 20 or 30 d in July, heat-induced troughs in cropping were observed in August. An important discovery was that cool (13 degrees C) night temperatures ameliorated the severity of thermodormancy. In this study, thermodormancy appeared to be due principally to flower abortion post-anthesis, as large numbers of flowers emerged in mid-July, during the high temperature treatments, but went on to produce low fruit numbers in mid-August. Flower initiation itself (monitored by crown dissection) was not reduced by high temperatures. The observation that night-time temperature is critical for thermodormancy has significance for commercial production, in which protected cropping tends to increase average temperatures throughout the season, and venting tends to focus on day-time temperatures.

Analysis of shade and temperature effects on assimilate partitioning in the everbearing strawberry 'Everest' as the basis for optimised long-season fruit production

Growth patterns and cropping were evaluated over the season for the everbearing strawberry 'Everest' at a range of temperatures (15-27degreesC) in two light environments (ambient and 50% shade). The highest yield was recorded for unshaded plants grown at 23degreesC, but the optimum temperature for vegetative growth was 15degreesC. With increasing temperature fruit number increased, but fruit weight decreased. Fruit weight was also significantly reduced by shade, and although 'Everest' showed a degree of shade tolerance in vegetative growth, yield was consistently reduced by shade. Shade also reduced the number of crowns developed by the plants over the course of the season, emphasising that crown number was ultimately the limiting factor for yield potential. We conclude that, in contrast to Junebearers which partition more assimilates to fruit at temperatures around 15degreesC (Le Miere et al., 1998), optimised cropping in the everbearer 'Everest' is achieved at the significantly higher temperature of 23degreesC. These findings have significance for commercial production, in which protection tends to reduce light levels but increase average temperature throughout the season.

Identification of lipophilic flavones and flavonols by comparative HPLC, TLC and UV spectral analysis

The identification of lipophilic flavones and flavonols using a combination of high performance liquid chromatography, thin layer chromatography and UV spectral analysis is discussed. Data are provided for the flavones, apigenin, luteolin and tricetin and twelve of their methyl ethers, 8-hydroxyluteolin, 6-hydroxyluteolin and scutellarein and fourteen of their methyl ethers, and some 6,8-dihydroxyapigenin and 6,8-dihydroxyluteolin derivatives. Data for some forty two flavonols with extra 6- and/or 8-hydroxylation, mostly 6-hydroxykaempferol and quercetagetin derivatives, are also presented. The remaining compounds analysed include fourteen 5-deoxyflavones, four 5-methoxyflavones and five 5-deoxyflavonols plus further 5-hydroxylated flavones and flavonols without B-ring oxidation or with 2-, 5- or 6-hydroxylation. Copyright © 2003 John Wiley & Sons, Ltd.

In situ observation of lithium hydride hydrolysis by DRIFT spectroscopy

Polycrystalline LiH was studied in situ using diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy to investigate the effect water vapour has on the rate of production of the corrosion products, particularly LiOH. The reaction rate of the formation of surface LiOH was monitored by measurement of the hydroxyl (OH) band at 3676 cm(-1). The initial hydrolysis rate of LiH exposed to water vapour at 50% relative humidity was found to be almost two times faster than LiH exposed to water vapour at 2% relative humidity. The hydrolysis rate was shown to be initially very rapid followed by a much slower, almost linear rate. The change in hydrolysis rate was attributed to the formation of a coherent layer of LiOH on the LiH surface. Exposure to lower levels of water vapour appeared to result in the formation of a more coherent corrosion product, resulting in effective passivation of the surface to further attack from water. Crown Copyright (c) 2007 Published by Elsevier B.V. All rights reserved.

Microfabrication of high-performance aromatic polymers as nanotubes or fibrils by in situ ring-opening polymerisation of macrocyclic precursors

Melt-phase nucleophilic ring-opening polymerisation of macrocyclic aromatic ethers and thioethers at high temperatures within the cylindrical pores of an anodic-alumina membrane, followed by dissolution of the template, enables replication of the membrane's internal pore structure and so affords high-performance aromatic polymers with well-defined fibrillar or tubular morphologies.

Towards the total synthesis of colletofragarones: constructing the macrocyclic lactone by high pressure-mediated intramolecular Diels-Alder reaction

We report herein an intramolecular Diels-Alder approach towards the construction of the macrocyclic lactone ring and the perhydrobenzofuran system of the colletofragarones, novel metabolites produced by fungi of the genus Colletotrichum that are responsible for inhibition of germination of the conidia in these species. Crown Copyright (C) 2009 Published by Elsevier Ltd. All rights reserved.

A contribution to the differentiation between nectar honey and honeydew honey

Thirty genuine honey samples were analyzed for pH, acidity, water, ash, net absorbance, total polyphenols (Folin-Ciocalteau method) and glucose, fructose, melezitose and erlose (as their trimethylsilyl oximes and trimethylsilyl ethers) by capillary gas chromatography. The resulting data were used, along with palynological analysis, to characterize the samples in relation to their possible source (nectar, honeydew and mixture honeys). Some minor components (carboxylic acids and cyclitols), eluting before monosaccharides, were also determined. One of these compounds was quercitol (1,3,4/2,5-cyclohexane-pentol), a deoxyinositol which has been previously determined in Quercus sp. samples. Quercitol was present in a broad concentration range (0.01-1.50 g/100 g) in honeys whose major source was honeydew but it was never higher than 0.01 g/100 g in samples characterized as nectar honeys. Quercitol concentrations appear to be related to the presence and amount of Quercus sp. honeydew as honey source, although further research is required to confirm this. (C) 2004 Elsevier Ltd. All rights reserved.

Sugars and related compounds as flavour precursors in meat

Sugars and related substances, namely sugar phosphates and ribonucleotides, are important meat flavour precursors. In particular, ribose and ribose 5-phosphate have been shown to be important in aroma development in heated model systems. There are few quantitative data on the concentrations and the variations of sugars and related substances in meat. This paper will report on the analysis of glucose, fructose, ribose, ribose 5-phosphate, fructose 6-phosphate, glucose 6-phosphate and inosine 5'-monophosphate (IMP) in aged beef. Sugars and related compounds were extracted from lean meat and derivatised to the corresponding TMS ethers. Analysis and quantitation of the sugars and sugar phosphates were performed using GC and GC/MS, while IMP analysis was performed using capillary electrophoresis (CE).

Atopostipes suicloacale gen. nov., sp. nov., isolated from an underground swine manure storage pit

Phenotypic and molecular genetic studies were performed on an unknown facultative anaerobic, catalase-negative, non-spore-forming, rod-shaped bacterium isolated from a pig manure storage pit. The unknown bacterium was nutritionally fastidious with growth enhanced by the addition of rumen fluid and was phenotypically initially identified as an Eubacterium species. Comparative 16S rRNA gene sequencing studies, however, revealed that the unknown bacterium was phylogenetically distant from Eubacterium limosum (the type species of the genus Eubacterium) and related organisms. Phylogenetically, the unknown species displayed a close association with an uncultured organism from human subgingival plaque and formed an unknown sub-line within a cluster of organisms which includes Alloioccoccus otitis, Alkalibacterium olivoapovliticus, Allofustis seminis, Dolosigranulum pigrum, and related organisms, within the low mol% G + C Gram-positive bacteria. Sequence divergence values of > 8% with all known taxonomically recognised taxa, however, clearly indicates the novel bacterium represents a hitherto unknown genus. Based on both phenotypic and phylogenetic considerations, it is proposed that the unknown bacterium from pig manure be classified in a new genus and species, as Atopostipes suicloacale gen. nov., sp. nov. The type strain of Atopostipes suicloacale is PPC79(T) = NRRL 23919(T) = DSM 15692(T). Crown Copyright (C) 2004 Published by Elsevier Ltd. All rights reserved.

Autonomous intelligent cruise control using a novel multiple-controller framework incorporating fuzzy-logic-based switching and tuning

This paper presents a novel intelligent multiple-controller framework incorporating a fuzzy-logic-based switching and tuning supervisor along with a generalised learning model (GLM) for an autonomous cruise control application. The proposed methodology combines the benefits of a conventional proportional-integral-derivative (PID) controller, and a PID structure-based (simultaneous) zero and pole placement controller. The switching decision between the two nonlinear fixed structure controllers is made on the basis of the required performance measure using a fuzzy-logic-based supervisor, operating at the highest level of the system. The supervisor is also employed to adaptively tune the parameters of the multiple controllers in order to achieve the desired closed-loop system performance. The intelligent multiple-controller framework is applied to the autonomous cruise control problem in order to maintain a desired vehicle speed by controlling the throttle plate angle in an electronic throttle control (ETC) system. Sample simulation results using a validated nonlinear vehicle model are used to demonstrate the effectiveness of the multiple-controller with respect to adaptively tracking the desired vehicle speed changes and achieving the desired speed of response, whilst penalising excessive control action. Crown Copyright (C) 2008 Published by Elsevier B.V. All rights reserved.

A classification system for delirium subtyping with the use of a commercial mobility monitor

The usefulness of motor subtypes of delirium is unclear due to inconsistency in subtyping methods and a lack of validation with objective measures of activity. The activity of 40 patients was measured over 24 h with a commercial accelerometer-based activity monitor. Accelerometry data from patients with DSM-IV delirium that were readily divided into hyperactive, hypoactive and mixed motor subtypes, were used to create classification trees that were Subsequently applied to the remaining cohort to define motoric subtypes. The classification trees used the periods of sitting/lying, standing, stepping and number of postural transitions as measured by the activity monitor as determining factors from which to classify the delirious cohort. The use of a classification system shows how delirium subtypes can be categorised in relation to overall activity and postural changes, which was one of the most discriminating measures examined. The classification system was also implemented to successfully define other patient motoric subtypes. Motor subtypes of delirium defined by observed ward behaviour differ in electronically measured activity levels. Crown Copyright (C) 2009 Published by Elsevier B.V. All rights reserved.

Reversible ageing effects in cryogenically cooled infrared filter radiometers

In this paper we report the observation of drifts in the responsivity of cryogenically cooled InSb detector-based infrared filter radiometers which have very strong wavelength dependence. These drifts can result in the increase or decrease of the response of the filter radiometers by over 5%. The origin of these variations was investigated and was shown to arise due to a thin film of ice formed on the multi-layer bandpass filter used to define the spectral response of the filter radiometer. The thin layer of ice interacts with the characteristics of the filter (which itself consists of a number of thin layers) and modifies the filter spectral transmission thus modifying the response of the filter radiometer of which the filter is part of. These observations are particularly relevant to space instruments which use infrared filter radiometers for earth observation. Debris from the spacecraft engines is known to accumulate on cold surfaces of instruments carried on board. The deposition of this debris on cold filters can modify the spectral response of the instruments, which use these filters to define a spectral response. Crown Copyright (c) 2004 Published by Elsevier B.V. All rights reserved.

Physical interpretation of the correlation between multi-angle spectral data and canopy height

Recent empirical studies have shown that multi-angle spectral data can be useful for predicting canopy height, but the physical reason for this correlation was not understood. We follow the concept of canopy spectral invariants, specifically escape probability, to gain insight into the observed correlation. Airborne Multi-Angle Imaging Spectrometer (AirMISR) and airborne Laser Vegetation Imaging Sensor (LVIS) data acquired during a NASA Terrestrial Ecology Program aircraft campaign underlie our analysis. Two multivariate linear regression models were developed to estimate LVIS height measures from 28 AirMISR multi-angle spectral reflectances and from the spectrally invariant escape probability at 7 AirMISR view angles. Both models achieved nearly the same accuracy, suggesting that canopy spectral invariant theory can explain the observed correlation. We hypothesize that the escape probability is sensitive to the aspect ratio (crown diameter to crown height). The multi-angle spectral data alone therefore may not provide enough information to retrieve canopy height globally.

Interest in Medieval accounts: examples from England, 1272-1340

The charging of interest for borrowing money, and the level at which it is charged, is of fundamental importance to the economy. Unfortunately, the study of the interest rates charged in the middle ages has been hampered by the diversity of terms and methods used by historians. This article seeks to establish a standardized methodology to calculate interest rates from historical sources and thereby provide a firmer foundation for comparisons between regions and periods. It should also contribute towards the current historical reassessment of medieval economic and financial development. The article is illustrated with case studies drawn from the credit arrangements of the English kings between 1272 and c.1340, and argues that changes in interest rates reflect, in part, contemporary perceptions of the creditworthiness of the English crown.