Síntese e potenciais aplicações de novas porfirinas β-funcionalizadas

Neste trabalho é descrita a síntese de novos derivados porfirínicos com potencial aplicação em terapia fotodinâmica (PDT) e como quimiossensores para o reconhecimento molecular de catiões metálicos. Os novos compostos foram preparados usando como “template” 2-formil-5,10,15,20-tetrafenilporfirina através de diferentes abordagens sintéticas, tais como, reações de cicloadição 1,3-dipolar ou reações do tipo condensação aldólica. Depois de uma breve introdução sobre porfirinas segue-se no capítulo 2 a descrição dos estudos de formilação de Vilsmeier-Haack dos complexos de Ni(II) e Cu(II) de meso-tetra-arilporfirinas realizados usando irradiação de microondas. Utilizando os complexos de Ni(II) e Cu(II) da 5,10,15,20-tetrafenilporfirina foram considerados vários solventes, potências de irradiação e tempos de reação; as melhores condições encontradas foram aplicadas a outras mesotetra- arilporfirinas. Os derivados formilados resultantes da reação de formilação de Vilsmeier-Haack com irradiação de micro-ondas foram isolados em bons rendimentos e com significativa redução no tempo de reação, que passou de horas, em condiçoes clássicas de aquecimento, para minutos sob irradiação de micro-ondas. O “scale-up” da reação, nas condições estabelecidas, mostrou ser eficiente não sendo a reação afetada pelo aumento da quantidade de porfirina. O capítulo 3 descreve a reação de ciclo-adição 1,3-dipolar de meso-tetraarilporfirinas com iminas de nitrilo, geradas in situ por desidrobromação de hidrazono-α-bromoglioxilatos de etilo na presença de base. A reação de iminas de nitrilo com 5,10,15,20-tetraquis(pentafluorofenil)porfirina, na presença de K2CO3 em tolueno a refluxo, permitiu isolar novas pirazoloclorinas em rendimentos moderados. Foram investigadas as propriedades fotofísicas das novas clorinas e os resultados sugerem que duas delas apresentam potencialidades para serem utilizadas em PDT. Este tipo de reações foi estendida ao complexo 2-vinil-5,10,15,20- tetrafenilporfirinatozinco(II); este complexo reagiu com as iminas de nitrilo obtendo-se os correspondentes derivados porfirina-pirazolina em rendimentos que variaram entre valores de bom e de excelente. A regioquímica dos derivados porfirina-pirazolina formados foi elucidada por RMN e confirmada por difração de raios-X. O tratamento dos derivados porfirina-pirazolina com DDQ proporciona os correspondentes derivados porfirina-pirazol com rendimentos de moderados a excelentes. Quando os derivados porfirina-pirazolina foram submetidos a condições de hidrólise básica, observou-se não só a hidrólise do grupo éster presente no anel pirazolínico mas também a concomitante oxidação desta unidade heterocíclica, isolando-se assim, num único passo reacional, novos derivados de tipo porfirinapirazol com um grupo carboxílico. A descomplexação dos complexos de Zn(II) foi realizada na presença de TFA, tendo-se isolado quantitativamente os respetivos derivados na forma de bases livres.Foram estudadas algumas das propriedades fotofísicas de todos os compostos obtidos, quer na forma de complexos de Zn(II), quer na forma de base livre. Duma forma geral, todos os compostos preparados mostraram ser bons geradores de oxigénio singleto, o que os torna interessantes para possível utilização como fotossensibilizadores em PDT. No capítulo 4 é descrita a reação de 2-formil-5,10,15,20-tetrafenilporfirina com aril-cetonas e acetato de amónio, na presença de La(OTf)3, o que permitiu isolar novas benzoporfirinas e 2-(2,6-diarilpiridina-4-il)porfirinas. Esta metodologia foi utilizada para preparar, pela primeira vez, uma 2-(2,2':6,2''- terpiridin-4-il)porfirina. As estruturas de duas das 2-(2,6-diarilpiridin-4- il)porfirinas foram confirmadas por difração de raios-X de cristal único. A metodologia descrita permite ainda preparar novos derivados de tipo porfirinacalcona, apenas com pequenos ajustes nas condições reacionais através de uma reação do tipo condensação aldólica. Os derivados do tipo porfirinacalcona foram posteriormente usados para preparar derivados do tipo porfirinapirazol 1,3,5-tri-substituídos em bons rendimentos, através de reação de condensação com fenil-hidrazina. Em cada um dos capítulos é descrito os procedimentos experimentais e a caracterização espectroscópica (RMN, UV-vis e massa) dos novos compostos isolados. Em alguns casos foi necessário o recurso a técnicas de RMN bidimensionais como COSY, NOESY, HSQC e HMBC. Os compostos preparados neste trabalho foram ainda objecto de estudos de avaliação das respetivas potencialidades para actuarem como quimiossensores para o reconhecimento de catiões metálicos, nomeadamente, Cu(II), Ag(I), Zn(II), Cd(II) e Hg(II). Assim no capítulo 5 é descrita a caracterização fotofísica dos compostos preparados no capítulo 4 e, os estudos destes como potenciais quimiossensores. Os estudos para verificar a potencialidade dos compostos como quimiossensores foram efectuados: i) em solução, através de titulações espectrofotométricas e espectrofluorimétricas, ii) no estado sólido, recorrendo à preparação de filmes de PMMA dopados com os ligandos porfirínicos em estudo e, iii) na fase gasosa, seguindo as titulações dos ligandos com metais por espectrometria de massa (MALDI-TOF-MS). Os compostos estudados mostraram ter capacidade para atuarem como quimiossensores de catiões metálicos capazes de distinguirem entre os iões Zn(II) e Hg(II).

Corroles : synthesis, functionalization and application as chemosensors

O trabalho de investigação apresentado nesta dissertação foi desenvolvido tendo como objectivo a síntese e funcionalização de meso-triarilcorróis para utilização como quimiossensores. Este trabalho encontra-se apresentado ao longo de cinco capítulos. No primeiro capítulo são apresentadas as características gerais, as metodologias de síntese e de funcionalização de macrociclos de tipo corrólico, e descrevemse algumas aplicações em que têm sido utilizados. São ainda abordadas algumas das propriedades e características dos quimiossensores e os mecanismos de deteção de diversos analítos. No segundo capítulo, após uma pequena introdução às reações de Wittig e de Diels-Alder, escolhidas para a funcionalização do macrociclo corrólico, descreve-se o estudo efectuado para a obtenção do complexo de gálio(III) do 3- vinil-5,10,15-tris(pentafluorofenil)corrol e o seu comportamento como dieno, em reações de Diels-Alder na presença dos dienófilos 1,4-benzoquinona e 1,4- naftoquinona. Desses estudos resultaram dois aductos cuja habilidade sensorial, bem como a dos seus precursores, foi estudada, em solução, na presença de aniões esféricos (F-, Br-, Cl-), lineares (CN-) e volumosos (CH3COO-, H2PO4 -). Dos macrociclos estudados verificou-se que o corrol base-livre 5,10,15-tris(pentafluorofenil)corrol apresenta uma elevada sensibilidade para o anião fluoreto (F-), e que a coordenação do núcleo corrólico com gálio(III) diminui a afinidade para este anião. Em geral, todos os compostos mostraram afinidade para o anião cianeto (CN-) mesmo quando em suportes poliméricos. O gel de poliacrilamida revelou-se muito promissor na determinação de CN- em amostras de água. No terceiro capítulo é avaliada a reatividade do complexo de gálio(III) do 3- vinil-5,10,15-tris(pentafluorofenil)corrol ainda como dieno mas agora na presença de um dienófilo linear, o acetilenodicarboxilato de dimetilo. Desse estudo resultaram dois novos derivados corrólicos. A habilidade sensorial dos mesmos perante os aniões fluoreto, cianeto, acetato, e fosfato foi avaliada por espectroscopia de absorção e emissão tendo um dos aductos mostrado ser colorimétrico para o anião cianeto. No quarto capítulo descreve-se a síntese e caracterização de dois conjugados do tipo corrol-cumarina, resultantes de reações de Hetero-Diels-Alder entre o 3-vinil-5,10,15-tris(pentafluorofenil)corrolatogálio(III)(piridina) e orto-quinonasmetídeos gerados in situ a partir de reacções de Knoevenagel entre cumarinas e paraformaldeído. Realizaram-se estudos de afinidade sensorial para aniões e catiões com estes macrociclos, bem como com conjugados porfirinacumarina análogos. A inserção de uma unidade cumarina conferiu uma excepcional solubilidade tendo os novos derivados apresentado solubilidade em etanol. No quinto e último capítulo desta dissertação é avaliada a capacidade sensorial do 5,10,15-tris(pentafluorofenil)corrol e da sua espécie monoaniónica, para os catiões metálicos Na+, Ca2+, Cu2+, Cd2+, Pb2+, Hg2+, Ag+, Al3+, Zn2+, Ni2+, Cr3+, Ga3+, Fe3+ em tolueno e acetonitrilo. Os macrociclos corrólicos mostraram ser selectivos e colorimétricos para o catião Hg2+. Neste trabalho descreve-se ainda a síntese do derivado -iminocorrol, que após funcionalização com o 3-isocianatopropiltrimetoxisilano originou um derivado do tipo alcoxisilano, que foi, posteriormente, ancorado a nanopartículas comerciais de sílica. As novas nanopartículas ancoradas com o alcoxisilano corrol foram estudadas na presença de Cu2+, Hg2+ e Ag+. Na presença do catião Ag+ assistiu-se a uma mudança de cor, de verde para amarelo.

Integration of geochemical and biological modifications in mining areas: waters, sediments and diatoms

The development of mining activities over thousands of years in the region of Aljustrel is nowadays visible as a vast area of ore tailings, slag and host rocks of sulphides mineralization. The generation of acidic waters by the alteration of pyritic minerals - Acid Mine Drainage (AMD) - causes a significant impact on the river system both in the south of the village (Rib ª. Água Forte) and in the north of it (Rib ª. Água Azeda and Barranco do Farrobo), which is reflected in extremely low pH values (< 3) and high concentrations of As, Cd, Cu, Fe, Mn, Pb, Zn and sulphates. This study aimed to assess the environmental impacts extent, integrating geochemical (surface waters and stream sediments) and biological (diatoms) parameters. Three groups of sites were defined, based on sediments and water analysis, which integration with diatom data showed the same association of groups: Group 1- impacted, with acidic pH (1.9-5.1), high metal contents (0.4-1975 mg L-1) and Fe-Mg-sulphate waters, being metals more bioavailable in waters in cationic form (Me2+); mineralogically the sediments were characterized by phyllosilicates and sulphates/oxy-hydroxysulphate phases, easily solubilized, retaining a high amount of metals when precipitated; dominant taxon was Pinnularia aljustrelica (a new species); Group 2- slightly impacted, weak acid to neutral pH (5.0-6.8), metal contents not so high (0.2-25 mg L-1) and Fe-Mg-sulphate to Mg-chloride waters; dominant taxa were Brachysira neglectissima and Achnanthidium minutissimum; Group 3- unimpacted, alkaline pH (7.0-8.4), low metal contents (0-7 mg L-1) with Mg-chloride waters. In this group, metals were associated to the primary phases (e.g. sulphides), not so easily available; the existence of high chloride contents explained the presence of typical taxa of brackish/marine (e.g. Entomoneis paludosa) waters. Taxonomical aspects of the diatoms were studied (discovery of a new species: Pinnularia aljustrelica Luis, Almeida et Ector sp. nov.), as well as morphometric (size decrease of diatoms valves, as well as the appearance of deformed valves of Eunotia exigua in Group 1 and A. minutissimum in Group 2) and physiological (effective to assess the effects of metals/acidity in the photosynthetic efficiency through PAM Fluorometry) aspects. A study was carried out in an artificial river system (microcosm) that aimed to mimic Aljustrel’s extreme conditions in controlled laboratory conditions. The chronic effects of Fe, SO42- and acidity in field biofilms, inoculated in the artificial rivers, were evaluated as well as their contribution to the communities’ tolerance to metal toxicity, through acute tests with two metals (Cu and Zn). In general, the effects caused by low pH values and high concentrations of Fe and SO42- were reflected at the community level by the decrease in diversity, the predominance of acidophilic species, the decrease in photosynthetic efficiency and the increase of enzymatic (e.g. catalase, superoxide dismutase) and non-enzymatic activities (e.g. total glutathione and total phytochelatins). However, it was possible to verify that acidity performed a protective effect in the communities, upon Cu and Zn addition. A comparative study between Aljustrel mining area and New Brunswick mining area was carried out, both with similar mining and geological conditions, reflected in similar diatom communities in both mines, but in very different geographic and climatic areas.

Expanded porphyrins and their evaluation as anion chemosensors

Expanded porphyrins are synthetic analogues of porphyrins, differing from the last ones and other naturally occurring tetrapyrrolic macrocycles by containing a larger central core, with a minimum of 17 atoms, while retaining the extended conjugation features that are a tremendous feature of these biological pigments. The core expansion results in various systems with novel spectral and electronic features, often uniques. Most of these systems can also coordinate cations and/or anions, and in some cases they can bind more than one of these species. In many cases, these molecules display structural features, such as non-planar structures, that have no antecedents in the chemistry of porphyrins or related macrocyclic compounds. This work will discuss several synthetic approaches for the synthesis of expanded porphyrins, namely the construction of new building blocks by Michael addition, as well as potential synthetic routes towards expanded porphyrins. The synthesis of smaller oligopyrrolic compounds namely, bipyrroles and dipyrromethanes, not only were developed for the synthesis of expanded porphyrins as they were also used in Knoevenagel condensations furnishing chromogenic compounds able to recognize different anions in solution. Also, an approach to the synthesis of novel expanded porphyrins namely sapphyrins has been done by aza-Michael additions. Several synthetic routes towards the synthesis of pyridyl and pyridinium N-Fused pentaphyrins and hexaphyrins have been explored in order to achieve compounds with potential applications in catalysis and PDI, respectively. Studies on the synthesis of compounds with potential anion binding properties, led to the structural characterization and NMR anion binding studies of [28]hexaphyrins functionalized with several diamines in the para position of their pentafluorophenyl groups. These compounds allow NH hydrogen bond interactions with various anions. All synthesized compounds were fully characterized by modern spectroscopic techniques.

Effect of photodynamic therapy on the virulence factors of Staphylococcus aureus

Staphylococcus aureus are Gram-positive bacteria who integrate the human microbiota. Nevertheless, these bacteria can be pathogenic to the humans. Due to the increasing occurrence of antibiotic-resistant S. aureus new approaches to control this pathogen are necessary. The antimicrobial photodynamic inactivation process (PDI) is based in the combined use of a light source, an oxidizing agent like oxygen and an intermediary agent (a photosensitizer). These three components interact to form cytotoxic reactive oxygen species that irreversibly damage vital constituents of the microbial cells and ultimately lead to cell death. In fact, PDI is being shown to be a promising alternative to the antibiotic approach in the inactivation of pathogenic microorganisms. However, information on effects of photosensitization on particular virulence factors is strikingly scarce. The objective of this work was to evaluate the effect of PDI on virulence factors of S. aureus. For this, as photosensitizer the 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetra-iodide (Tetra-Py+-Me) and six strains of S. aureus (one reference strain, one strain with 1 enterotoxin, two strains with 3 enterotoxins and two strains resistant to methicillin, MRSA – one with 5 enterotoxins and the other without enterotoxins) were used. The effect of photosensitization on catalase activity, beta hemolysis, lipases, thermonuclease, enterotoxins, coagulase production and resistance to methicillin was assessed. The results indicate that the expression of some virulence factors in the cells subjected to this therapy is affected. Additionally the susceptibility of the strains to PDI did not decrease upon successive treatments.

In vitro and in vivo insulinotropic properties of the multifunctional frog skin peptide hymenochirin-1B: a structure–activity study

Hymenochirin-1b (Hym-1B; IKLSPETKDNLKKVLKGAIKGAIAVAKMV.NH2) is a cationic, α-helical amphibian host-defense peptide with antimicrobial, anticancer, and immunomodulatory properties. This study investigates the abilities of the peptide and nine analogues containing substitutions of Pro5, Glu6, and Asp9 by either l-lysine or d-lysine to stimulate insulin release in vitro using BRIN-BD11 clonal β cells or isolated mouse islets and in vivo using mice fed a high-fat diet to produce obesity and insulin resistance. Hym-1B produced a significant and concentration-dependent increase in the rate of insulin release from BRIN-BD11 cells without cytotoxicity at concentrations up to 1 µM with a threshold concentration of 1 nM. The threshold concentrations for the analogues were: [P5K], [E6K], [D9K], [P5K, E6K] and [E6K, D9k] 0.003 nM, [E6K, D9K] and [D9k] 0.01 nM, [P5K, D9K] 0.1 nM and [E6k] 0.3 nM. All peptides displayed cytotoxicity at concentrations ≥1 µM except the [P5K] and [D9k] analogues which were non-toxic at 3 µM. The potency and maximum rate of insulin release from mouse islets produced by the [P5K] peptide were significantly greater than produced by Hym-1B. Neither Hym-1B nor the [P5K] analogue at 1 µM concentration had an effect on membrane depolarization or intracellular Ca2+. The [P5K] analogue (1 µM) produced a significant increase in cAMP concentration in BRIN-BD11 cells and stimulated GLP-1 secretion from GLUTag cells. Down-regulation of the protein kinase A pathway by overnight incubation with forskolin completely abolished the insulin-releasing effects of [P5K]hym-1B. Intraperitoneal administration of the [P5K] and [D9k] analogues (75 nmol/kg body weight) to high-fat-fed mice with insulin resistance significantly enhanced glucose tolerance with a concomitant increase in insulin secretion. We conclude that [P5K]hym-1B and [D9k]hym-1B show potential for development into anti-diabetic agents.

Synthesis and evaluation of polymer nanoparticles for delivery in RPE cells

Ocular pathologies are among the most debilitating medical conditions affecting all segments of the population. Traditional treatment options are often ineffective, and gene therapy has the potential to become an alternative approach for the treatment of several pathologies. Methacrylate polymers have been described as highly biocompatible and are successfully used in medical applications. Due to their cationic nature, these polymers can be used to form polyplexes with DNA for its delivery. This work aims to study the potential of PDMAEMA (poly(2-(N,N’-dimethylamino)ethyl methacrylate)) as a non viral gene delivery system to the retina. The first part of this work aimed to study the potential for gene delivery of a previously synthesized PDMAEMA polymer of high molecular weight (354kDa). In the second part, we synthesized by RAFT a PDMAEMA with a lower molecular weight (103.3kDa) and similarly, evaluated its ability to act as a gene delivery vehicle. PDMAEMA/DNA polyplexes were prepared at 5, 7.5, 10, 12.5 and 20 nitrogen/phosphorous (N/P) ratio for the 354kDa PDMAEMA and at 5 and 7.5 for the 103.3kDa PDMAEMA. Dynamic light scattering and zeta potential measurements confirmed the nanosize and positive charge of polyplexes for all ratios and for both polymers. Both high and low Mw PDMAEMA were able to efficiently complex and protect DNA from DNase I degradation. Their cytotoxicity was evaluated using a non-retinal cell line (HEK293) and a retinal pigment epithelium (RPE) cell line (D407). We have found that cytotoxicity of the free polymer is concentration and time dependent, as expected, and negligible for all the concentrations of the PDMAEMA-DNA polyplexes. Furthermore, for the concentrations to be used in vivo, the 354kDa PDMAEMA showed no signs of inflammation upon injection in the intravitreal space of C57BL/6 mice. The transfection efficiency, as evaluated by fluorescence microscopy and flow cytometry, showed that the D407 retinal cells were transfected by polyplexes of both high and low Mw PDMAEMA, but with varied efficiency, which was dependent on the N/P ratio. Althogether, these results suggest that PDMAEMA is a feasible candidate for non-viral gene delivery to the retina, and this work constitutes the basis of further studies to elucidate the bottleneck in transfection and further optimization of the material.

Bio-synthesis of nanosized semiconductors using mine wastes as material sources

This work describes the synthesis of nanosized metal sulfides and respective SiO2 and/or TiO2 composites in high yield via a straightforward process, under ambient conditions (temperature and pressure), by adding to aqueous metals a nutrient solution containing biologically generated sulfide from sulfate-reducing bacteria (SRB). The nanoparticles‘ (NPs) morphological properties were shown not to be markedly altered by the SRB growth media composition neither by the presence of bacterial cells. We further extended the work carried out, using the effluent of a bioremediation system previously established. The process results in the synthesis of added value products obtained from metal rich effluents, such as Acid Mine Drainage (AMD), when associated with the bioremediation process. Precipitation of metals using sulfide allows for the possibility of selective recovery, as different metal sulfides possess different solubilities. We have evaluated the selective precipitation of CuS, ZnS and FeS as nanosized metal sulfides. Again, we have also tested the precipitation of these metal sulfides in the presence of support structures, such as SiO2. Studies were carried out using both artificial and real solutions in a continuous bioremediation system. We found that this method allowed for a highly selective precipitation of copper and a lower selectivity in the precipitation of zinc and iron, though all metals were efficiently removed (>93% removal). This research has also demonstrated the potential of ZnS-TiO2 nanocomposites as catalysts in the photodegradation of organic pollutants using the cationic dye, Safranin-T, as a model contaminant. The influence of the catalyst amount, initial pH and dye concentration were also evaluated. Finally, the efficiency of the precipitates as catalysts in sunlight mediated photodegradation was investigated, using different volumes of dye-contaminated water (150 mL and 10 L). This work demonstrates that all tested composites have the potential to be used as photocatalysts for the degradation of Safranin-T.

Synthesis and structural characterization of new Piano-stool Ruthenium(II) complexes bearing 1-Butylimidazole heteroaromatic ligand

New cationic ruthenium(II) complexes with the formula [Ru(eta(5)-C5H5)(LL)(1-BuIm)] [Z], with (LL) = 2PPh(3) or DPPE, and Z = CF3SO3-, PF6-, BPh4-, have been synthesized and fully characterized. Spectroscopic and electrochemical studies revealed that the electronic properties of the coordinated 1-butylimidazole were clearly influenced by the nature of the phosphane coligands (LL) and also by the different counter ions. The solid state structures of the six complexes determined by X-ray crystallographic studies, confirmed the expected distorted three-legged piano stool structure. However the geometry of the 1-butylimidazole ligand was found considerably different in all six compounds, being governed by the stereochemistry of the mono and bidentate coligands (PPh3 or DPPE).

Solid contact PVC membrane electrodes based on neutral or charged carriers for the selective reading of anionic sulfamethoxazole and their application to the analysis of aquaculture water

Sulfamethoxazole (SMX) is among the antibiotics employed in aquaculture for prophylactic and therapeutic reasons. Environmental and food spread may be prevented by controlling its levels in several stages of fish farming. The present work proposes for this purpose new SMX selective electrodes for the potentiometric determination of this sulphonamide in water. The selective membranes were made of polyvinyl chloride (PVC) with tetraphenylporphyrin manganese (III) chloride or cyclodextrin-based acting as ionophores. 2-nitrophenyl octyl ether was employed as plasticizer and tetraoctylammonium, dimethyldioctadecylammonium bromide or potassium tetrakis (4-chlorophenyl) borate was used as anionic or cationic additive. The best analytical performance was reported for ISEs of tetraphenylporphyrin manganese (III) chloride with 50% mol of potassium tetrakis (4-chlorophenyl) borate compared to ionophore. Nersntian behaviour was observed from 4.0 × 10−5 to 1.0 × 10−2 mol/L (10.0 to 2500 µg/mL), and the limit of detection was 1.2 × 10−5 mol/L (3.0 µg/mL). In general, the electrodes displayed steady potentials in the pH range of 6 to 9. Emf equilibrium was reached before 15 s in all concentration levels. The electrodes revealed good discriminating ability in environmental samples. The analytical application to contaminated waters showed recoveries from 96 to 106%.

Rapid automated method for on-site determination of sulfadiazine in fish farming: a stainless steel veterinary syringe coated with a selective membrane of PVC serving as a potentiometric detector in a flow-injection-analysis system

Sulfadiazine is an antibiotic of the sulfonamide group and is used as a veterinary drug in fish farming. Monitoring it in the tanks is fundamental to control the applied doses and avoid environmental dissemination. Pursuing this goal, we included a novel potentiometric design in a flow-injection assembly. The electrode body was a stainless steel needle veterinary syringe of 0.8-mm inner diameter. A selective membrane of PVC acted as a sensory surface. Its composition, the length of the electrode, and other flow variables were optimized. The best performance was obtained for sensors of 1.5-cm length and a membrane composition of 33% PVC, 66% onitrophenyloctyl ether, 1% ion exchanger, and a small amount of a cationic additive. It exhibited Nernstian slopes of 61.0 mV decade-1 down to 1.0×10-5 mol L-1, with a limit of detection of 3.1×10-6 mol L-1 in flowing media. All necessary pH/ionic strength adjustments were performed online by merging the sample plug with a buffer carrier of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, pH 4.9. The sensor exhibited the advantages of a fast response time (less than 15 s), long operational lifetime (60 days), and good selectivity for chloride, nitrite, acetate, tartrate, citrate, and ascorbate. The flow setup was successfully applied to the analysis of aquaculture waters. The analytical results were validated against those obtained with liquid chromatography–tandem mass spectrometry procedures. The sampling rate was about 84 samples per hour and recoveries ranged from 95.9 to 106.9%.

Smart Plastic Antibody Material for Hemoglobin Tailored by Silica Surface Imprinting and with Charged Binding Sites: Its use as Ionophore in Potentiometric Transduction

JORNADAS DE ELECTROQUÍMICA E INOVAÇÃO 2013

Improved polymeric medical devices for active substances delivery

The work presented in this thesis was developed in collaboration with a Portuguese company, BeyonDevices, devoted to pharmaceutical packaging, medical technology and device industry. Specifically, the composition impact and surface modification of two polymeric medical devices from the company were studied: inhalers and vaginal applicators. The polyethylene-based vaginal applicator was modified using supercritical fluid technology to acquire self-cleaning properties and prevent the transport of bacteria and yeasts to vaginal flora. For that, in-situ polymerization of 2-substituted oxazolines was performed within the polyethylene matrix using supercritical carbon dioxide. The cationic ring-opening polymerization process was followed by end-capping with N,N-dimethyldodecylamine. Furthermore, for the same propose, the polyethylene matrix was impregnated with lavender oil in supercritical medium. The obtained materials were characterized physical and morphologically and the antimicrobial activity against bacteria and yeasts was accessed. Materials modified using 2-substituted oxazolines showed an effective killing ability for all the tested microorganisms, while the materials modified with lavender oil did not show antimicrobial activity. Only materials modified with oligo(2-ethyl-2-oxazoline) maintain the activity during the long term stability. Furthermore, the cytotoxicity of the materials was tested, confirming their biocompatibilty. Regarding the inhaler, its surface was modified in order to improve powder flowability and consequently, to reduce powder retention in the inhaler´s nozzle. New dry powder inhalers (DPIs), with different needle’s diameters, were evaluated in terms of internal resistance and uniformity of the emitted dose. It was observed that they present a mean resistance of 0.06 cmH2O0.5/(L/min) and the maximum emitted dose obtained was 68.9% for the inhaler with higher needle´s diameter (2 mm). Thus, this inhaler was used as a test and modified by the coating with a commonly-used force control agent, magnesium stearate, dried with supercritical carbon dioxide (scCO2) and the uniformity of delivered dose tests were repeated. The modified inhaler showed an increase in emitted dose from 68.9% to 71.3% for lactose and from 30.0% to 33.7% for Foradil.

Nanocarriers for DNA Vaccines: Co-Delivery of TLR-9 and NLR-2 Ligands Leads to Synergistic Enhancement of Proinflammatory Cytokine Release

Adjuvants enhance immunogenicity of vaccines through either targeted antigen delivery or stimulation of immune receptors. Three cationic nanoparticle formulations were evaluated for their potential as carriers for a DNA vaccine, and muramyl dipeptide (MDP) as immunostimulatory agent, to induce and increase immunogenicity of Mycobacterium tuberculosis antigen encoding plasmid DNA (pDNA). The formulations included (1) trimethyl chitosan (TMC) nanoparticles, (2) a squalene-in-water nanoemulsion, and (3) a mineral oil-in-water nanoemulsion. The adjuvant effect of the pDNA-nanocomplexes was evaluated by serum antibody analysis in immunized mice. All three carriers display a strong adjuvant effect, however, only TMC nanoparticles were capable to bias immune responses towards Th1. pDNA naturally contains immunostimulatory unmethylated CpG motifs that are recognized by Toll-like receptor 9 (TLR-9). In mechanistic in vitro studies, activation of TLR-9 and the ability to enhance immunogenicity by simultaneously targeting TLR-9 and NOD-like receptor 2 (NLR-2) was determined by proinflammatory cytokine release in RAW264.7 macrophages. pDNA in combination with MDP was shown to significantly increase proinflammatory cytokine release in a synergistic manner, dependent on NLR-2 activation. In summary, novel pDNA-Ag85A loaded nanoparticle formulations, which induce antigen specific immune responses in mice were developed, taking advantage of the synergistic combinations of TLR and NLR agonists to increase the adjuvanticity of the carriers used.

A comparative study of protoheme and heme d catalases : role of the heme and the heme pocket in catalysis and ligand binding

Catalase dismutes H20 2 to O2 and H20. In successive twoelectron reactions H20 2 induces both oxidation and reduction at the heme group. In the first step the protoheme prosthetic group of beef liver catalase forms compound I, in which the heme has been oxidized from Fe3+ to Fe4+=0 and a porphyrin radical has been created. Compound II is formed by the oneelectron reduction of comp I. It retains Fe4+=0 but lacks the porphyrin radical and is catalytically inert. Molecular structures are available for Escherichia coli Hydroperoxidase II, Micrococcus Iysodeiktus, Penicillium vitale and beef liver enzymes, which contain different hemes and heme pockets. In the present work, the pockets and substrate access channels of protoheme (beef liver & Micrococcus) and heme d (HPII of E. coli and Penicillium) catalases have been analysed using Quanta™ and CharmMTM molecular modeling packages on the Silicon Graphics Iris Indigo 2 computer. Experimental studies have been carried out with two catalases, HPII (and its mutants) and beef liver. Fluoride and formate' are inhibitors of both enzymes, and their binding is modulated by the heme and by distal residues N201 & H128. Both HPII and beef liver enzymes form compound I with H202 or peracetate. The reduction of beef liver enzyme compound I to II and the decay of compound II are accelerated by fluoride. The decay of compound II is also accelerated by formate, and this reagent acts as a 2-electron donor towards compound I of both enzymes. It is concluded that heme d enzymes (Penicillium and HPII of E. coli) are formed by autocatalytic transformation of protoheme in a modified pocket which contains a characteristic serine residue as well as a partially occluded heme channel. They are less active than protoheme enzymes but also do not form the inactive compound II species. Binding of peroxide as well as fluoride and formate is prevented by mutation of H128 and modulated by mutation of N201.