The contradictions and complementarities of combining ERP systems with enterprise 2.0 supported informal systems

The chapter discusses both the complementary factors and contradictions of adopting ERP based systems with enterprise 2.0. ERP is characterized as achieving efficient business performance by enabling a standardized business process design, but at a cost of flexibility in operations. It is claimed that enterprise 2.0 can support flexible business process management and so incorporate informal and less structured interactions. A traditional view however is that efficiency and flexibility objectives are incompatible as they are different business objectives which are pursued separately in different organizational environments. Thus an ERP system with a primary objective of improving efficiency and an enterprise 2.0 system with a primary aim of improving flexibility may represent a contradiction and lead to a high risk of failure if adopted simultaneously. This chapter will use case study analysis to investigate the use of a combination of ERP and enterprise 2.0 in a single enterprise with the aim of improving both efficiency and flexibility in operations. The chapter provides an in-depth analysis of the combination of ERP with enterprise 2.0 based on social-technical information systems management theory. The chapter also provides a summary of the benefits of the combination of ERP systems and enterprise 2.0 and how they could contribute to the development of a new generation of business management that combines both formal and informal mechanisms. For example, the multiple-sites or informal communities of an enterprise could collaborate efficiently with a common platform with a certain level of standardization but also have the flexibility in order to provide an agile reaction to internal and external events.

In two minds about screening: an investigation of cervical cancer prevention among Irish women

Cervical cancer is the second most common female cancer worldwide. Cervical screening programmes can reduce the incidence of cervical cancer by up to 80 percent if the invited women participate. Previous Irish research has associated screening attendance with subjective norms, anticipated regret, higher socio-economic status and education. Greater perceived screening barriers and lacking knowledge were associated with avoidance. These findings support a variety of expectancy-value theories of behaviour. They also suggest that expectancy-value theories could benefit from the inclusion of affective predictors of behaviour, like anticipated regret. In 2008 the Republic of Ireland introduced the National Cervical Screening Programme (NCSP). This research seeks to identify the predictors of participation in the NCSP. A systematic review of reviews showed that predictors of screening participation clustered into environmental and psychological influences. There is a gap in the evidence synthesis of associations with personal characteristics and health beliefs. Thematic analysis of focus group interviews confirmed the validity of many screening predictors identified by the systematic review and expectancy-value theories. A survey of these predictors suggested that reduced screening barriers might encourage first-time participation, while regular attendance requires greater endorsement of screening benefits and stronger subjective norm and intention. Positive attitude, rather than knowledge, appeared to be crucial for strong intention, so the final study piloted an experiment comparing the utility of positive attitude in strengthening intention to the utility of information provision. Despite lacking significant differences between conditions, content analysis of participant comments suggested that a full trial would be worthwhile, given purposive sampling and improved sample retention. These findings agree with previous Irish research on the importance of screening intention, although its association with attitude appeared to be stronger in the present research. The findings further indicate that future screening promotion should consider interventions based on patients’ experiences of screening.

« Utilisation des services de santé chez les personnes âgées : association avec la maladie chronique et l’incapacité »

Diverses publications soulignent l'augmentation de l'espérance de vie et avec elle, le vieillissement mondial de la population. Ce processus se poursuivra à l'avenir, ainsi que son influence sur l’incidence et la prévalence de l'incapacité. Chez les personnes âgées, l’incapacité, les maladies chroniques et leur association constituent un sujet important dans le domaine de la santé publique en raison de l'effet qu'ils ont sur la demande des services de santé. Le but de ce mémoire est d’examiner quelle est la contribution respective des maladies chroniques et de l'incapacité dans l'utilisation des services de santé chez les personnes âgées et de leur interaction. Il s’agit de savoir si l'association entre la maladie chronique et l'utilisation des services de santé est modifiée par l’incapacité prenant en compte les caractéristiques de l'individu et son environnement. Ce travail est basé sur le modèle comportemental proposé par Andersen et Newman et le modèle du processus d’incapacité de Verbrugge et Jette. Pour répondre à l’objectif, nous utilisons les données du projet de recherche “ FRéLE ” (Fragilité, une étude longitudinale de ses expressions), réalisé durant la période 2010 -2013 auprès d’un échantillon de 1643 personnes âgées vivant dans la communauté au Québec. L’incapacité est évaluée à l’aide de deux indicateurs : les AVQ et les AVD. Les maladies chroniques sont mesurées par l’indice fonctionnel de comorbidité (IFC). La dépression est évaluée selon les critères de l’échelle de dépression gériatrique (EDG). L’état cognitif est mesuré par l'évaluation cognitive de Montréal (MoCA). Les facteurs de prédisposition comportent l’âge, le sexe, l’ethnicité et le niveau scolaire. Les facteurs facilitateurs incluent le revenu et le réseau social, ce dernier étant mesure par la présence ou non d’une personne de soutien et son lien avec la personne âgée. Divers modèles de régression sont adoptés pour identifier les facteurs statistiquement significatifs du modèle comportemental d’Andersen et Newman et du modèle du processus d’incapacité de Verbrugge et Jette. Nos résultats ont montré que, si le rôle des prédicteurs de l’utilisation varie en fonction du type de services de santé utilisé, l’utilisation s’accroît principalement avec le nombre de maladies chroniques. En ce qui concerne l’interaction entre la maladie chronique et l’incapacité, nos résultats ont révélé que l’interaction n’est statistiquement significative pour aucun des services analysés. Compte tenu de la diversité et les besoins de la population âgée, caractérisée par une prévalence élevée de maladies chroniques et d'incapacités, l’étude des facteurs impliqués dans l'utilisation des services de santé sera utile pour la mise en œuvre d’une offre de services, plus conforme aux besoins de cette population

Connectivity of fragmented amphibian populations in a Neotropical landscape

A high proportion of amphibian species are threatened with extinction globally, and habitat loss and degradation are the most frequently implicated causes. Rapid deforestation for the establishment of agricultural production is a primary driver of habitat loss in tropical zones where amphibian diversity is highest. Land-cover change affects native assemblages, in part, through the reduction of habitat area and the reduction of movement among remnant populations. Decreased gene flow contributes to loss of genetic diversity, which limits the ability of local populations to respond to further environmental changes. The focus of this dissertation is on the degree to which common land uses in Sarapiquí, Costa Rica impede the movement of two common amphibian species. First, I used field experiments, including displacement trials, and a behavioral landscape ecology framework to investigate the resistance of pastures to movement of Oophaga pumilio. Results from experiments demonstrate that pastures do impede movement of O. pumilio relative to forest. Microclimatic effects on movement performance as well as limited perceptual ranges likely contribute to reduced return rates through pastures. Next, I linked local processes to landscape scale estimates of resistance. I conducted experiments to measure habitat-specific costs to movement for O. pumilio and Craugastor bransfodrii, and then used experimental results to parameterize connectivity models. Model validation indicated highest support for resistance estimates generated from responses to land-use specific microclimates for both species and to predator encounters for O. pumilio. Finally, I used abundance and experiment-derived resistance estimates to analyze the effects of prevalent land uses on population genetic structure of the two focal species. While O. pumilio did not exhibit a strong response to landscape heterogeneity and was primarily structured by distances among sites, C. bransfordii genetic variation was explained by resistance estimates from abundance and experiment data. Collectivity, this work demonstrates that common land uses can offer different levels of resistance to amphibian movements in Sarapiquí and illustrates the value of investigating local scales processes to inform interpretation of landscape-scale patterns.

Chlorine Contribution to Quantitative Structure and Activity Relationship Models of Disinfection By-Products' Quantum Chemical Descriptors and Toxicities

Quantitative Structure-Activity Relationship (QSAR) has been applied extensively in predicting toxicity of Disinfection By-Products (DBPs) in drinking water. Among many toxicological properties, acute and chronic toxicities of DBPs have been widely used in health risk assessment of DBPs. These toxicities are correlated with molecular properties, which are usually correlated with molecular descriptors. The primary goals of this thesis are: 1) to investigate the effects of molecular descriptors (e.g., chlorine number) on molecular properties such as energy of the lowest unoccupied molecular orbital (ELUMO) via QSAR modelling and analysis; 2) to validate the models by using internal and external cross-validation techniques; 3) to quantify the model uncertainties through Taylor and Monte Carlo Simulation. One of the very important ways to predict molecular properties such as ELUMO is using QSAR analysis. In this study, number of chlorine (NCl) and number of carbon (NC) as well as energy of the highest occupied molecular orbital (EHOMO) are used as molecular descriptors. There are typically three approaches used in QSAR model development: 1) Linear or Multi-linear Regression (MLR); 2) Partial Least Squares (PLS); and 3) Principle Component Regression (PCR). In QSAR analysis, a very critical step is model validation after QSAR models are established and before applying them to toxicity prediction. The DBPs to be studied include five chemical classes: chlorinated alkanes, alkenes, and aromatics. In addition, validated QSARs are developed to describe the toxicity of selected groups (i.e., chloro-alkane and aromatic compounds with a nitro- or cyano group) of DBP chemicals to three types of organisms (e.g., Fish, T. pyriformis, and P.pyosphoreum) based on experimental toxicity data from the literature. The results show that: 1) QSAR models to predict molecular property built by MLR, PLS or PCR can be used either to select valid data points or to eliminate outliers; 2) The Leave-One-Out Cross-Validation procedure by itself is not enough to give a reliable representation of the predictive ability of the QSAR models, however, Leave-Many-Out/K-fold cross-validation and external validation can be applied together to achieve more reliable results; 3) ELUMO are shown to correlate highly with the NCl for several classes of DBPs; and 4) According to uncertainty analysis using Taylor method, the uncertainty of QSAR models is contributed mostly from NCl for all DBP classes.

E-Government Collaboration in the Swedish Public Sector : Multiple Studies on Collaboration Facilitators and Collaboration Modes

Collaboration in the public sector is imperative to achieve e-government objectives such as improved efficiency and effectiveness of public administration and improved quality of public services. Collaboration across organizational and institutional boundaries requires public organizations to share e-government systems and services through for instance, interoperable information technology and processes. Demands on public organizations to become more open also require that public organizations adopt new collaborative approaches for inviting and engaging citizens in governmental activities. E-government related collaboration in the public sector is challenging, however, and collaboration initiatives often fail. Public organizations need to learn how to collaborate since forms of e-government collaboration and expected outcomes are mostly unknown. How public organizations can collaborate and the expected outcomes are thus investigated in this thesis by studying multiple collaboration cases on the acquisition and implementation of a particular e-government investment (digital archive). This thesis also investigates how e-government collaboration can be facilitated through artifacts. It is done through a case study, where objects that cross boundaries between collaborating communities in the public sector are studied, and by designing a configurable process model integrating several processes for social services. By using design science, this thesis also investigates how an m-government solution that facilitates collaboration between citizens and public organizations can be designed. The thesis contributes to literature through describing five different modes of interorganizational collaboration in the public sector and the expected benefits from each mode. It also contributes with an instantiation of a configurable process model supporting three open social e-services and with evidence of how it can facilitate collaboration. This thesis further describes how boundary objects facilitate collaboration between different communities in an open government design initiative. It contributes with a designed mobile government solution, thereby providing proof of concept and initial design implications for enabling collaboration with citizens through citizen sourcing (outsourcing a governmental activity to citizens through an open call). This thesis also identifies research streams within e-government collaboration research through a literature review and the thesis contributions are related to the identified research streams. This thesis gives directions for future research by suggesting that future research should focus further on understanding e-government collaboration and how information and communication technology can facilitate collaboration in the public sector. It is suggested that further research should investigate m-government solutions to form design theories. Future research should also examine how value can be co-created in e-government collaboration.

Exploring Service Innovation Practices Through a Longitudinal Ethnographic Case Study

Case study research has the advantage of investigating issues that are embedded within the context of the case. A novel approach to investigation of the implementation of service innovation process has been adopted through a longitudinal ethnographic case study. This approach was found useful, as the outcome of the study was intended to be an in-depth understanding of firm’s current innovation practices and its consequences with the implementation of a novel business process. In this applied research, an array of longitudinal data was generated chiefly through the technique of participant-observation. Participant-observation as a qualitative or naturalistic method has its roots in ethnographic research. Participant-observation involves “participating in the social world, in whatever role, and reflecting on the products of that participation” (Hammersley & Atkinson, 1983, p.16). This method offers a degree of understanding of the context under study that can come only from personal experience. In this presentation, I discuss the role of the researcher-practitioner as participant-observer and the usefulness of ethnographic case study methodology and participant-observation technique to investigating service innovation practices that are embedded within the context-specific setting of the case.

Analisi e ottimizzazione del flusso di approvvigionamento in una produzione su commessa: il caso CT Pack S.r.l.

La tesi ha l'obiettivo di analizzare e ottimizzare i flussi di approvvigionamento in un'azienda che produce su commessa: CT Pack S.r.L, specializzata nella realizzazione di macchine automatiche per il packaging di biscotti, gelato e cioccolato. Per raggiungere l'obiettivo si è preso come riferimento il modello proposto dal BPR (Business Process Reengineering): sono stati analizzati i principali attori coinvolti, in particolare fornitori e magazzino, mediante l'uso di KPI definiti ad hoc. Sulla base di questi sono stati individuati due processi critici: il primo riguarda la gestione del magazzino, che presenta un'elevata quantità di codici non movimentati anche a causa del processo di gestione del materiale avanzato al termine di ciascuna commessa; il secondo riguarda il materiale a consumo, che impiega i magazzinieri per un tempo eccessivo, è caratterizzato da giacenze per il 30% non movimentate e da supermarket collocati in officina ridondanti e caratterizzati da bassi tassi di utilizzo (anche sotto il 50%). Per risolvere questi problemi ed effettuare una riprogettazione si fa affidamento agli strumenti proposti dal project management: si imposta quindi un progetto che ha l'obiettivo di ridurre nel breve periodo il valore di magazzino mediante lo smaltimento attraverso diverse vie di codici non utilizzati e agisce nel lungo periodo per evitare che le criticità si ripropongano. Mediante la riprogettazione della gestione dei resi di produzione si prevede un maggior controllo, grazie al lavoro congiunto di ufficio tecnico e ufficio acquisti. La nuova gestione del materiale a consumo ha in se alcune delle tecniche proposte dalla lean production (il kanban, per esempio) e integra il fornitore nella catena di approvvigionamento, garantendo un maggior controllo sulle quantità, un risparmio di circa 7 h/mese di lavoro per i magazzinieri e una riduzione delle giacenze del 46%.

Continuous Delivery : Utmaningar ett förvaltningsuppdrag kan stå inför vid en övergång till Continuous Delivery

Continuous delivery (CD) is a software engineering approach where the focus lays on creating a short delivery cycle by automating parts of the deployment pipeline which includes build, deploy-, test and release process. CD is based on that during development should be possible to always automatically generate a release based on the source code in its current state. One of CD's many advantages is that through continuous releases it allows you to get a quick feedback loop leading to faster and more efficient implementation of new functions, at the same time fixing errors. Although CD has many advantages, there are also several challenges a maintenance management project must manage in the transition to CD. These challenges may differ depending on the maturity level for a maintenance management project and what strengths and weaknesses the project has. Our research question was: "What challenges can a maintenance management project face in transition to Continuous delivery?" The purpose of this study is to describe Continuous delivery and the challenges a maintenance management project may face during a transition to Continuous delivery. A descriptive case study has been carried out with the data collection methods of interviews and documents. A situation analysis was created based on the collected data in a shape of a process model that represent the maintenance management projects release process. The processmodel was used as the basis of SWOT analysis and analysis by Rehn et al's Maturity Model. From these analyzes we found challenges of a maintenance management project may face in the transition to CD. The challenges are about customers and the management's attitude towards a transition to CD. But the biggest challenge is about automation of the deployment pipeline steps.

Negros misturados: um estudo de caso sobre identidades negras em Mossoró-RN

With more or less 213.000 habitants, Mossoró is the second more developed city from the Rio Grande do Norte. The town is proclamated like the land of freedom. To so far, exist four moments in your history related with the defence of freedom that is point like truthful from so proclamation. Suchlike happenings are the first female vote on Brazil, the resistance against the Lampião s band, the worman s mutiny and the slave release in 1883, five year before the Áurea law sanction. These happenings are commemorate yearly on setember with one big theatrical event called by the freedom high. Inside this contexto of exaltation to freedom, there is one black movement by name black and beautiful. Is the present dissertation, talked about the building of black identities between the black militants of Mossoró and the dwellers from the Santo Antônio district. With such approach, we intend to think about possibles differences or likeness, how the militants and dwellers from the refered district self-calleds like blacks or not. We are understanding black identity like one process to self-affirmation done by specificities of the social context and the individual particularity. This way, the identity change into one dynamic and contextual reality, gone always by one business process against the interaction of the social actors. So we search to discuss the specificities that involve the process to building of black identities in the city of freedom

Determinación de brechas estructurales para la integración de la Responsabilidad Social en una empresa del sector BPO de la ciudad de Manizales

El estudio realizado sobre la determinación de brechas estructurales para la integración de la Responsabilidad Social en una empresa del sector BPO (Business Process Outsourcing) de la ciudad de Manizales tuvo como objetivos: caracterizar los enfoques de responsabilidad social empresarial-RSE-; establecer la relación entre las políticas, prácticas, valores y objetivos corporativos con los principios y materias fundamentales de la RSE, identificar mecanismos de relación con los stakeholders, e identificar las estrategias de comunicación y las acciones para la integración de la RSE. El estudio fue realizado por mediante la aplicación de instrumentos metodológicos basados en la ISO 26000, OHSAS 18001 e ISO 14001, a las áreas de control interno, comercial, operaciones, nómina, compras y presupuesto. Los resultados evidencian brechas en la integración de grupos de interés, en los mecanismos de comunicación interna y externa y en las materias fundamentales, en especial las relacionadas con prácticas laborales y medio ambiente. La implementación del Sistema de Seguridad y Salud en el trabajo basado en las OHSAS 18001 y el Sistema de Gestión ambiental según la ISO 14001 puede contribuir al cierre de brechas detectadas; por otra parte, es fundamental definir estrategias corporativas que fortalezcan la relación y comunicación con los diferentes stakeholders.

A Importância do Gestor Médico Científico na Indústria Farmacêutica

O Marketing de relacionamento nunca esteve tão evidente quanto nos dias atuais. Isto pode ser observado pela acirrada concorrência entre as empresas que desenvolvem produtos cada vez mais semelhantes, bem como pelo advento da globalização onde, a figura do consumidor mais consciente de suas necessidades, busca por aspectos diferenciais que, porventura possam complementar suas aspirações acerca do que lhe é oferecido. É exatamente neste ponto que as ações do Marketing de Relacionamento entram em ação, visando não somente estreitar o elo entre a empresa e o consumidor, como também estimular a fidelização deste referido consumidor ao produto ou serviço ofertado. O objetivo deste estudo é examinar as correlações existentes entre o grau de conhecimento científico do cliente medico, como formador de opinião, sobre uma nova classe de medicamentos para o tratamento da dislipidemia (inibidores da PCSK9), mensurando a mudança de opinião desses líderes após o contato com o Gestor Médico Científico, e para tal objetivo, elaborou-se uma pesquisa descritiva com questionário direcionado a 83 médicos, sendo este aplicado em duas fases, utilizando assim como ferramenta o capital humano representado pelo Gestor Médico Científico, com base no Marketing de Relacionamento, e que após a análise da pesquisa, obtiveram-se bases para incentivar esse tipo de ferramenta como modelo de Marketing adaptado e voltado para a indústria farmacêutica. O estudo permitiu concluir que as variáveis escolhidas para avaliar o grau de mudança de opinião dos médicos inquiridos, logo após a explicação científica sobre os temas relacionados com a dislipidemia e a nova classe de medicamentos destinada ao tratamento dessa patologia, revelaram a importância da educação médica através do Marketing de Relacionamento antes de lançar uma nova classe de fármacos. No contexto da validação do modelo, é possível constatar que ele pode ser utilizado como ferramenta na fase de pré-lançamento de um produto, em um país onde as leis vigentes proíbem quaisquer outros meios de promoção.