Global negative vegetation feedback to climate warming responses of leaf litter decomposition rates in cold biomes

Whether climate change will turn cold biomes from large long-term carbon sinks into sources is hotly debated because of the great potential for ecosystem-mediated feedbacks to global climate. Critical are the direction, magnitude and generality of climate responses of plant litter decomposition. Here, we present the first quantitative analysis of the major climate-change-related drivers of litter decomposition rates in cold northern biomes worldwide. Leaf litters collected from the predominant species in 33 global change manipulation experiments in circum-arctic-alpine ecosystems were incubated simultaneously in two contrasting arctic life zones. We demonstrate that longer-term, large-scale changes to leaf litter decomposition will be driven primarily by both direct warming effects and concomitant shifts in plant growth form composition, with a much smaller role for changes in litter quality within species. Specifically, the ongoing warming-induced expansion of shrubs with recalcitrant leaf litter across cold biomes would constitute a negative feedback to global warming. Depending on the strength of other (previously reported) positive feedbacks of shrub expansion on soil carbon turnover, this may partly counteract direct warming enhancement of litter decomposition.

Carbon dioxide dynamics and controls in a deep-water wetland on the Qinghai-Tibetan Plateau

To initially characterize the dynamics and environmental controls of CO2, ecosystem CO2 fluxes were measured for different vegetation zones in a deep-water wetland on the Qinghai-Tibetan Plateau during the growing season of 2002. Four zones of vegetation along a gradient from shallow to deep water were dominated, respectively by the emergent species Carex allivescens V. Krez., Scirpus distigmaticus L., Hippuris vulgaris L., and the submerged species Potamogeton pectinatus L. Gross primary production (GPP), ecosystem respiration (Re), and net ecosystem production (NEP) were markedly different among the vegetation zones, with lower Re and GPP in deeper water. NEP was highest in the Scirpus-dominated zone with moderate water depth, but lowest in the Potamogeton-zone that occupied approximately 75% of the total wetland area. Diurnal variation in CO2 flux was highly correlated with variation in light intensity and soil temperature. The relationship between CO2 flux and these environmental variables varied among the vegetation zones. Seasonal CO2 fluxes, including GPP, Re, and NEP, were strongly correlated with aboveground biomass, which was in turn determined by water depth. In the early growing season, temperature sensitivity (Q(10)) for Re varied from 6.0 to 8.9 depending on vegetation zone. Q(10) decreased in the late growing season. Estimated NEP for the whole deep-water wetland over the growing season was 24 g C m(-2). Our results suggest that water depth is the major environmental control of seasonal variation in CO2 flux, whereas photosynthetic photon flux density (PPFD) controls diurnal dynamics.

On the correlation between microstructural changes of Ag-H-ZSM-5 catalysts and their catalytic performances in the selective catalytic reduction of NOx by methane

The silver catalyzed, selective catalytic reduction (SCR) of nitrogen oxides (NOx) by CH4, is shown to be a structure-sensitive reaction. Pretreatment has a great affect on the catalytic performances. Upon thermal treatment in inert gas stream, thermal induced changes in silver morphology lead to the formation of reduced silver species of clusters and particles. Catalysis over this catalyst indicates an initially higher activity but lower selectivity for the CH4-SCR of NOx Reaction induced restructuring of silver results in the formation of ill-defined silver oxides. This, in turn, impacts the adsorption properties and diffusivity of oxygen over silver catalyst, results in the decrease in activity but increase in selectivity of Ag-H-ZSM-5 catalyst for the CH4-SCR of NO.. (c) 2004 Elsevier B.V. All rights reserved.

Variation of modal parameters of pile-supported structures in seismically liquefiable soils.

This paper presents experimental results that aimed to investigate the effects of soil liquefaction on the modal parameters (i.e. frequency and damping ratio) of pile-supported structures. The tests were carried out using the shaking table facility of the Bristol Laboratory for Advanced Dynamics Engineering (BLADE) at the University of Bristol (UK) whereby four pile-supported structures (two single piles and two pile groups) with and without superstructure mass were tested. The experimental investigation aimed to monitor the variation in natural frequency and damping of the four physical models at different degrees of excess pore water pressure generation and in full-liquefaction condition. The experimental results showed that the natural frequency of pile-supported structures may decrease considerably owing to the loss of lateral support offered by the soil to the pile. On the other hand, the damping ratio of structure may increase to values in excess of 20%. These findings have important design consequences: (a) for low-period structures, substantial reduction of spectral acceleration is expected; (b) during and after liquefaction, the response of the system may be dictated by the interactions of multiple loadings, that is, horizontal, axial and overturning moment, which were negligible prior to liquefaction; and (c) with the onset of liquefaction due to increased flexibility of pile-supported structure, larger spectral displacement may be expected, which in turn may enhance Pdelta effects and consequently amplification of overturning moment. Practical implications for pile design are discussed.

Intention and Causation in Medical Non-Killing: The impact of criminal law concepts on euthanasia and assisted suicide

null RAE2008

Double Jeopardy Without Parameters: Re-characterization in International Criminal Law

Olusanya, O. (2004). Double Jeopardy Without Parameters: Re-characterization in International Criminal Law. Series Supranational Criminal Law: Capita Selecta, volume 2. Antwerp: Intersentia. RAE2008

Ethics and Foreign Policy: The Antinomies of New Labour's 'Third Way' in Sub-Saharan Africa

Abrahamsen, Rita, Williams, Paul, 'Ethics and Foreign Policy: The Antinomies of New Labour's 'Third Way' in Sub-Saharan Africa', Political Studies (2002) 49(2) pp.249-264 RAE2008

Diurnal variation in uptake and xylem contents of inorganic and assimilated N under continuous and interrupted N supply to Phleum pratense and Festuca pratensis

J. H. Macduff and A. K. Bakken. (2003). Diurnal variation in uptake and xylem contents of inorganic and assimilated N under continuous and interrupted N supply to Phleum pratense and Festuca pratensis. Journal of Experimental Botany, 54 (381) pp.431-444 Sponsorship: BBSRC / Norwegian Crop Research Institute RAE2008

Angewandte Kulturwissenschaften – Überlegungen zum Studienprogramm einer akademischen Disziplin nach dem cultural turn im Hinblick auf berufliche Perspektiven

The author tries to attract attention for the careers ant the education of that what we call applied Cultural Studies after the cultural turn in the Humanities. He refers to some empirical studies and tries to put it out how differs the several institutes especially in the German spoken academic world. After all the conclusion of the author could be that there is an big demand for specialists in the area of applied cultural studies. The formation or education has to refer widely to a conception or the terminus of every-day-culture, so that it could be a big help in economic, social and education professions.

A Unified Model of Spatiotemporal Processing in the Retina

A computational model of visual processing in the vertebrate retina provides a unified explanation of a range of data previously treated by disparate models. Three results are reported here: the model proposes a functional explanation for the primary feed-forward retinal circuit found in vertebrate retinae, it shows how this retinal circuit combines nonlinear adaptation with the desirable properties of linear processing, and it accounts for the origin of parallel transient (nonlinear) and sustained (linear) visual processing streams as simple variants of the same retinal circuit. The retina, owing to its accessibility and to its fundamental role in the initial transduction of light into neural signals, is among the most extensively studied neural structures in the nervous system. Since the pioneering anatomical work by Ramón y Cajal at the turn of the last century[1], technological advances have abetted detailed descriptions of the physiological, pharmacological, and functional properties of many types of retinal cells. However, the relationship between structure and function in the retina is still poorly understood. This article outlines a computational model developed to address fundamental constraints of biological visual systems. Neurons that process nonnegative input signals-such as retinal illuminance-are subject to an inescapable tradeoff between accurate processing in the spatial and temporal domains. Accurate processing in both domains can be achieved with a model that combines nonlinear mechanisms for temporal and spatial adaptation within three layers of feed-forward processing. The resulting architecture is structurally similar to the feed-forward retinal circuit connecting photoreceptors to retinal ganglion cells through bipolar cells. This similarity suggests that the three-layer structure observed in all vertebrate retinae[2] is a required minimal anatomy for accurate spatiotemporal visual processing. This hypothesis is supported through computer simulations showing that the model's output layer accounts for many properties of retinal ganglion cells[3],[4],[5],[6]. Moreover, the model shows how the retina can extend its dynamic range through nonlinear adaptation while exhibiting seemingly linear behavior in response to a variety of spatiotemporal input stimuli. This property is the basis for the prediction that the same retinal circuit can account for both sustained (X) and transient (Y) cat ganglion cells[7] by simple morphological changes. The ability to generate distinct functional behaviors by simple changes in cell morphology suggests that different functional pathways originating in the retina may have evolved from a unified anatomy designed to cope with the constraints of low-level biological vision.

Precision biomechanical motion tracking and throw characterisation in professional darts

In professional sports there are in general three steps required to improve performance namely task definition, training and performance assessment. This process is iteratively repeated and feedback generated from quantitative performance measurement is in turn used for task redefinition. Task definition can be achieved in a number of ways including via video streaming or indeed and as is more common, by listening to coaching staff. However non-subjective performance evaluation is difficult due to the complexity of the movements involved. When considering the subset of sports where precision accuracy and repeatability are a necessity this problem becomes inherently more difficult to solve. Until recently sports such as martial arts, fencing and darts, where the smallest deviation from a prescribed movement goal can result in large outcome error, were deemed too difficult to characterise fully. Advances in technology, as illustrated by this study, now make this type of physiometry possible.

A preliminary study on how fatigue affects scoring average in professional darts

The purpose of this preliminary study is to identify signs of fatigue in specific muscle groups that in turn directly influence accuracy in professional darts. Electromyography (EMG) sensors are employed to monitor the electrical activity produced by skeletal muscles of the trunk and upper limb during throw. It is noted that the Flexor Pollicis Brevis muscle which controls the critical release action during throw shows signs of fatigue. This is accompanied by an inherent increase in mean integral EMG amplitude for a number of other throw related muscles indicating an attempt to maintain constant applied throwing force. A strong correlation is shown to exist between average score and decrease in mean integral ECG amplitude for the Flexor Pollicis Brevis.

Hearing family carers: report on research undertaken with family carers in Cork

This report details the findings of research undertaken with family carers in Cork during 2007 – 2008. The research was undertaken to elicit the views and experiences of family carers, and in so doing, to gain insight into their perspectives on family caring and on associated support mechanisms. It is hoped that, thereafter, policy can draw on these observations. Three key themes emerged from the research itself. These are (i) the role and position of the family carer in society, (ii) the process of family caring itself and (iii) access to and knowledge of key support services. This report, then, draws attention to the extent and dynamics of family caring, as seen through the opinions and experiences of carers located in and nearby Cork city. It has the following format. In the first instance we turn our attention to a discussion of family caring in Ireland, and associated supports more generally. This includes a discussion on key issues arising in the general discourse around family caring in Ireland and internationally, in order to provide a context from which to locate the experiences of carers involved in this research study. Thereafter, we detail the methodology employed in this research study, which followed a method of research enquiry that values the input of participants from the early stages of research focus and design, and which incorporates qualitative and quantitative methods of enquiry. The research was conceptualised and developed in conjunction with The Carers Association, Cork in keeping with an approach to social research that attempts to link academic and activist/advocacy interests. Its aims were to identify issues that family carers in the locality considered important, with a view to contributing to local knowledge, providing a forum for ongoing research, and to informing policy developments on carers. The focus of the report then turns to profiling carers who participated in the research, examining the care they provide, and discussing support they receive from family, friends and neighbours – from informal sources. We then look to the access carers have to formal and public, community-based support services. We examine their experiences of, and concerns with regard to some of these key services, and look at ways that such issues might be addressed. The next section concentrates on financial supports, a range of which are available to carers, for instance, to supplement income and to assist with home renovations. We look at their uptake and issues arising, again with a view to understanding and addressing them from the perspectives of the service users. Finally, the report turns its attention to aspirations that carers have for themselves; in terms of their own personal, training, and employment options. The report concludes by drawing attention to key issues discussed throughout and makes a number of key recommendations, aimed at addressing the voiced opinions and experiences of carers that have emerged through the research.

'La Violence et la mauvaise foi': Context and rhetoric in Pierre Bayle's Ce que c'est que la France toute Catholique

My thesis presents an examination of Ce que c'est que la France toute Catholique (1686) by Pierre Bayle, a prominent figure in the Republic of Letters and the Huguenot Refuge in the seventeenth century. This pamphlet was the first occasional text that Bayle published following the Revocation of the Edict of Nantes in which the religious toleration afforded to the Huguenot minority in France was repealed, a pivotal moment in the history of early modern France. In my thesis, I analyse the specific context within which Bayle wrote this pamphlet as a means of addressing a number of issues, including the legitimacy of forced conversions, the impact of the religious controversy upon exchanges in the Republic of Letters, the nature of religious zeal and finally the alliance of Church and state discourses in the early modern period. An examination of this context provides a basis from which to re-interpret the rhetorical strategies at work within the pamphlet, and also to come to an increased understanding of how, why and to what end he wrote it. In turn this allowed me to examine the relationship between this often overlooked pamphlet and the more extensively studied Commentaire Philosophique, in which Bayle argued in favour of religious toleration. Ultimately, understanding the relationship between these two texts proves essential in order to characterise his response to the Revocation of the Edict of Nantes and to understand the place of the pamphlet within his oeuvre. Furthermore, an analysis of the pamphlet and the Commentaire Philosophique provide a lens through which to elucidate both Bayle's intellectual development at this early stage in his career, and also the wider context of the rise of toleration theory and the evolution of modes of civility within the Republic of Letters on the eve of the Enlightenment.

Ironworking in late medieval Ireland, c. AD. 1200 to 1600

The landscape of late medieval Ireland, like most places in Europe, was characterized by intensified agricultural exploitation, the growth and founding of towns and cities and the construction of large stone edifices, such as castles and monasteries. None of these could have taken place without iron. Axes were needed for clearing woodland, ploughs for turning the soil, saws for wooden buildings and hammers and chisels for the stone ones, all of which could not realistically have been made from any other material. The many battles, waged with ever increasingly sophisticated weaponry, needed a steady supply of iron and steel. During the same period, the European iron industry itself underwent its most fundamental transformation since its inception; at the beginning of the period it was almost exclusively based on small furnaces producing solid blooms and by the turn of the seventeenth century it was largely based on liquid-iron production in blast-furnaces the size of a house. One of the great advantages of studying the archaeology of ironworking is that its main residue, slag, is often produced in copious amounts both during smelting and smithing, is virtually indestructible and has very little secondary use. This means that most sites where ironworking was carried out are readily recognizable as such by the occurrence of this slag. Moreover, visual examination can distinguish between various types of slag, which are often characteristic for the activity from which they derive. The ubiquity of ironworking in the period under study further means that we have large amounts of residues available for study, allowing us to distinguish patterns both inside assemblages and between sites. Disadvantages of the nature of the remains related to ironworking include the poor preservation of the installations used, especially the furnaces, which were often built out of clay and located above ground. Added to this are the many parameters contributing to the formation of the above-mentioned slag, making its composition difficult to connect to a certain technology or activity. Ironworking technology in late medieval Ireland has thus far not been studied in detail. Much of the archaeological literature on the subject is still tainted by the erroneous attribution of the main type of slag, bun-shaped cakes, to smelting activities. The large-scale infrastructure works of the first decade of the twenty-first century have led to an exponential increase in the amount of sites available for study. At the same time, much of the material related to metalworking recovered during these boom-years was subjected to specialist analysis. This has led to a near-complete overhaul of our knowledge of early ironworking in Ireland. Although many of these new insights are quickly seeping into the general literature, no concise overviews on the current understanding of the early Irish ironworking technology have been published to date. The above then presented a unique opportunity to apply these new insights to the extensive body of archaeological data we now possess. The resulting archaeological information was supplemented with, and compared to, that contained in the historical sources relating to Ireland for the same period. This added insights into aspects of the industry often difficult to grasp solely through the archaeological sources, such as the people involved and the trade in iron. Additionally, overviews on several other topics, such as a new distribution map of Irish iron ores and a first analysis of the information on iron smelting and smithing in late medieval western Europe, were compiled to allow this new knowledge on late medieval Irish ironworking to be put into a wider context. Contrary to current views, it appears that it is not smelting technology which differentiates Irish ironworking from the rest of Europe in the late medieval period, but its smithing technology and organisation. The Irish iron-smelting furnaces are generally of the slag-tapping variety, like their other European counterparts. Smithing, on the other hand, is carried out at ground-level until at least the sixteenth century in Ireland, whereas waist-level hearths become the norm further afield from the fourteenth century onwards. Ceramic tuyeres continue to be used as bellows protectors, whereas these are unknown elsewhere on the continent. Moreover, the lack of market centres at different times in late medieval Ireland, led to the appearance of isolated rural forges, a type of site unencountered in other European countries during that period. When these market centres are present, they appear to be the settings where bloom smithing is carried out. In summary, the research below not only offered us the opportunity to give late medieval ironworking the place it deserves in the broader knowledge of Ireland's past, but it also provided both a base for future research within the discipline, as well as a research model applicable to different time periods, geographical areas and, perhaps, different industries..