A streamlined life-cycle assessment and decision tool for used tyres recycling

In order to achieve progress towards sustainable resource management, it is essential to evaluate options for the reuse and recycling of secondary raw materials, in order to provide a robust evidence base for decision makers. This paper presents the research undertaken in the development of a web-based decision-support tool (the used tyres resource efficiency tool) to compare three processing routes for used tyres compared to their existing primary alternatives. Primary data on the energy and material flows for the three routes, and their alternatives were collected and analysed. The methodology used was a streamlined life-cycle assessment (sLCA) approach. Processes included were: car tyre baling against aggregate gabions; car tyre retreading against new car tyres; and car tyre shred used in landfill engineering against primary aggregates. The outputs of the assessment, and web-based tool, were estimates of raw materials used, carbon dioxide emissions and costs. The paper discusses the benefits of carrying out a streamlined LCA and using the outputs of this analysis to develop a decision-support tool. The strengths and weakness of this approach are discussed and future research priorities identified which could facilitate the use of life cycle approaches by designers and practitioners.

Deregulated estrogen metabolism in BRCA1 deficient cells induces chromosomal instability.

Objectives: Germline mutations in BRCA1 predispose carriers to a high
incidence of breast and ovarian cancers. The BRCA1 protein functions to maintain
genomic stability via important roles in DNA repair, transcriptional regulation, and
post-replicative repair. Despite functions in processes essential in all cells, BRCA1
loss or mutation leads to tumours predominantly in estrogen-regulated tissues.
Here, we aim to determine if endogenous estrogen metabolites may be an initiator
of genomic instability in BRCA1 deficient cells.

Methods: We analysed DNA DSBs by ?H2AX, 53BP1, and pATM1981
foci and neutral comet assay, estrogen metabolite concentrations by LC-MS/MS,
and BRCA1 transcriptional regulation of metabolism genes by ChIP-chip, ChIP,
and qRT-PCR.

Results: We show that estrogen metabolism is perturbed in BRCA1 deficient
cells resulting in elevated production of 2-hydroxyestradiol (2-OHE2) and 4-hydroxyestradiol (4-OHE2), and decreased production of the protective metabolite
4-methoxyestradiol. We demonstrate that 2-OHE2 and 4-OHE2 treatment leads
to DNA double strand breaks (DSBs) in breast cells, and these DSBs were exacerbated
in both BRCA1 depleted cells and BRCA1 heterozygous cells (harbouring
185delAG mutation). Furthermore, the DSBs were not repaired efficiently in either
BRCA1 depleted or heterozygous cells, and we found that 2-OHE2 and 4-OHE2
treatment generates chromosomal aberrations in BRCA1 depleted cells. We suggest
that the increase in DNA DSBs in BRCA1 deficient cells is due to loss of
both BRCA1 transcriptional repression of estrogen metabolising genes (such as
CYP1A1 and CYP3A4) and loss of transcriptional activation of detoxification
genes (such as COMT).

Conclusions: We suggest that BRCA1 loss results in estrogen driven tumourigenesis
through a combination of increased expression of estrogen metabolising
enzymes and reduced expression of protective enzymes, coupled with a defect in
the repair of DNA DSBs induced by endogenous estrogen metabolites. The overall
effect being an exacerbation of genomic instability in estrogen regulated tissues in
BRCA1 mutation carriers.

Cube, cylinder, core and pull-off strength relationships

This limited experimental investigation examined the relationships between the compressive strengths of cubes, cylinders, cores and the estimated compressive strengths derived from pull-off tests for a relatively low-strength structural-grade concrete (<35 N/mm2). Test specimens were cast and tested at 7, 14, 28, 56 and 84 days. The relationships of the trends of the test results to the trends of results of standard cube specimens and standard cylinder specimens were compared. It was found that the mean strength of each type of specimen tended to increase as a function of the natural logarithm of the specimen age. The mean strength of cylinders of length/diameter ratio 2.0 was found to be slightly greater (by about 7.5%) than the generally accepted value of 80% of the mean cube strength. Core results were corrected using correction factors defined in BS 6089 and the UK national annex to BS EN 12504-1. The mean corrected cube strength of cores taken from cubes was approximately 12% greater than the mean companion cube strength. The mean corrected cylinder strength of cores taken from cubes was approximately 5% greater than the mean companion cylinder strength. The potential cube and cylinder strengths of cores taken from slabs cured under different environmental conditions correlated well with companion cube and cylinder strengths respectively at 28 days. The pull-off test results gave a variable but, on average, slightly conservative estimate of the cube compressive strength of the relatively low-strength structural-grade concrete, using a simple general linear estimated compressive cube strength to tensile strength correlation factor of 10.

3-D micromechanical model for predicting the elastic behaviour of woven laminates

This paper presents an analytical model for the prediction of the elastic behaviour of plain-weave fabric composites. The fabric is a hybrid plain-weave with different materials and undulations in the warp and weft directions. The derivation of the effective material properties is based on classical laminate theory (CLT).

The theoretical predictions have been compared with experimental results and predictions using alternative models available in the literature. Composite laminates were manufactured using the resin infusion under flexible tooling (RIFT) process and tested under tension and in-plane shear loading to validate the model. A good correlation between theoretical and experimental results for the prediction of in-plane properties was obtained. The limitations of the existing theoretical models based on classical laminate theory (CLT) for predicting the out-of-plane mechanical properties are presented and discussed. 

Intralaminar toughness characterisation of unbalanced hybrid plain weave laminates

A numerical and experimental investigation on the mode-I intralaminar toughness of a hybrid plain weave composite laminate manufactured using resin infusion under flexible tooling (RIFT) process is presented in this paper. The pre-cracked geometries consisted of overheight compact tension (OCT), double edge notch (DEN) and centrally cracked four-point-bending (4PBT) test specimens. The position as well as the strain field ahead of the crack tip during the loading stage was determined using a digital speckle photogrammetry system. The limitation on the applicability of the standard data reduction schemes for the determination of intralaminar toughness of composite materials is presented and discussed. A methodology based on the numerical evaluation of the strain energy release rate using the J-integral method is proposed to derive new geometric correction functions for the determination of the stress intensity factor for composites. The method accounts for material anisotropy and finite specimen dimension effects regardless of the geometry. The approach has been validated for alternative non-standard specimen geometries. A comparison between different methods currently available for computing the intralaminar fracture toughness in composite laminates is presented and a good agreement between numerical and experimental results using the proposed methodology was obtained. 

Quasiparticle calculations of the electronic properties of ZrO2 and HfO2 polymorphs and their interface with Si

Quasiparticle calculations are performed to investigate the electronic band structures of various polymorphs of Hf and Zr oxides. The corrections with respect to density-functional-theory results are found to depend only weakly on the crystal structure. Based on these bulk calculations as well as those for bulk Si, the effect of quasiparticle corrections is also investigated for the band offsets at the interface between these oxides and Si assuming that the lineup of the potential at the interface is reproduced correctly within density-functional theory. On the one hand, the valence-band offsets are practically unchanged with a correction of a few tenths of electron volts. On the other hand, conduction-band offsets are raised by 1.3-1.5 eV. When applied to existing calculations for the offsets at the density-functional-theory level, our quasiparticle corrections provide results in good agreement with the experiment.

Lack of effect of glutamine administration to boost the innate immune system response in trauma patients in the intensive care unit

The use of glutamine as a dietary supplement is associated with a reduced risk of infection. We hypothesized that the underlying mechanism could be an increase in the expression and/or functionality of Toll-like receptors (TLR), key receptors sensing infections. The objective of this study was to evaluate whether glutamine supplementation alters the expression and functionality of TLR2 and TLR4 in circulating monocytes of trauma patients admitted to the intensive care unit (ICU).

Glutamine as a modulator of the immune system of critical care patients:effect on Toll-like receptor expression. A preliminary study

We evaluated the expression of Toll-like receptors 2 and 4 (TLR-2 and TLR-4) in circulating monocytes from peripheral blood of critical care patients treated with and without glutamine. Because no research has been published to date on the effect of glutamine on TLR receptors in critical patients, it was determined in an initial sample of 30 patients.

Topoisomerase IIα promotes activation of RNA polymerase I transcription by facilitating pre-initiation complex formation

Type II DNA topoisomerases catalyse DNA double-strand cleavage, passage and re-ligation to effect topological changes. There is considerable interest in elucidating topoisomerase II roles, particularly as these proteins are targets for anti-cancer drugs. Here we uncover a role for topoisomerase IIa in RNA polymerase I-directed ribosomal RNA gene transcription, which drives cell growth and proliferation and is upregulated in cancer cells. Our data suggest that topoisomerase IIa is a component of the initiation-competent RNA polymerase Iß complex and interacts directly with RNA polymerase I-associated transcription factor RRN3, which targets the polymerase to promoter-bound SL1 in pre-initiation complex formation. In cells, activation of rDNA transcription is reduced by inhibition or depletion of topoisomerase II, and this is accompanied by reduced transient double-strand DNA cleavage in the rDNA-promoter region and reduced pre-initiation complex formation. We propose that topoisomerase IIa functions in RNA polymerase I transcription to produce topological changes at the rDNA promoter that facilitate efficient de novo pre-initiation complex formation.