Effects of Microstructural Heterogeneity on The Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

The Effect of the Thickness of Fe2 Al5 Phase Layer at Fe/Al Interface on the Mechanics Behavior of Hot Dip Aluminizing Coating

Hot Dip Aluminized Coatings with different thickness were prepared on Q235 steel in aluminum solutions with different temperature for certain time. Through tensile tests and in-situ SEM observations, the effect of the coating's microstructure on the tensile strength of the samples was studied. It was disclosed at certain aluminum solution temperature,transaction layers mainly composed of Fe2 Al5 phase got thicker with time prolonging, and this changed initial crack's extending direction from parallel with to vertical with stretching direction. The change in crack direction decreased tensile strength of samples, thus made the coating easy to break. It was concluded that the existence of thick Fe2 Al5 phase layer was the basic reason for the lowering of tensile strength of the coating.

A Study of the Tribological Behavior of Carbon-Nanotube-Reinforced Ultrahigh Molecular Weight Polyethylene Composites

The tribological properties of the high-strength and high-modulus ultrahigh molecular weight polyethylene (UHMWPE) film and the UHMWPE composites reinforced by multiwalled carbon nanotubes (MWCNT/UHMWPE) were investigated using a nanoindenter and atomic force microscope (AFM). The MWCNT/UHMWPE composites films exhibited not only high wear resistance but also a low friction coefficient compared to the pure UHMWPE films. We attribute the high wear resistance to the formation of the new microstructure in the composites due to the addition of MWCNTs.

Experimental investigation of Very-High-Cycle Fatigue behavior for a structural steel

Very-High-Cycle Fatigue (VHCF) test for a medium carbon structural steel (40Cr) has been performed and a stepwise S-N curve was obtained by employing cantilever-type rotary bending fatigue machine with hourglass shape specimen. The S-N curve was well explained as a combination of curves for surface-induced fracture and interior inclusion-induced fracture with fish-eye patterns. The morphology of the fish-eye pattern was illustrated in order to clarify subsurface crack initiation and propagation behavior.

Torsion fracture behavior of drawn pearlitic steel wires with different heat treatments

In this paper, torsion fracture behavior of drawn pearlitic steel wires with different heat treatments was investigated. Samples with different heat treatments was investigated. Samples with different heat treatment conditions were subjected to torsion and tensile tests. The shear strain along the torsion sample after fracture was measured. Fracture surface of wires was examined by Scanning Electron Microscopy. In addition, the method of Differential Scanning Calorimetry was used to characterize the thermodynamic process in the heat treatment. A numerical simulation via finite element method on temperature field evolution for the wire during heat treatment process was performed. The results show that both strain aging and recovery process occur in the material within the temperature range between room temperature and 435 degrees C. It was shown that the ductility measured by the number of twists drops at short heating times and recovers after further heating in the lead bath of 435 degrees C. On the other hand, the strenght of the wire increases at short heating times and decreases after further heating. The microstructure inhomogeneity due to short period of heat treatment, coupled with the gradient characteristics of shear deformation during torsion results in localized shear deformation of the wire. In this situation, shear cracks nucleate between lamella and the wire breaks with low number of twists.

Hopwood Hall College: Touchscreen technology overtakes interactive whiteboards as interactive teaching tool of choice

Hopwood Hall is adopting the use of touch screen technology and gradually replacing its interactive whiteboards to improve access to interactive learning. The touch screen monitors connected to LCD TV’s provide a cheaper classroom build with technology that’s more user-friendly and better suited to classroom delivery. Until now, interactive boards had been the mainstay of classrooms but they created teaching barriers for staff including the additional software to learn and master. They are also expensive and often have usability issues with 'pens' not working or having a delay when used as the mouse tool.

Coalitional games with veto players: Myopic and farsighted behavior

This paper studies an allocation procedure for coalitional games with veto players. The procedure is similar to the one presented by Dagan et al. (1997) for bankruptcy problems. According to it, a player, the proposer, makes a proposal that the remaining players must accept or reject, and con ict is solved bilaterally between the rejector and the proposer. We allow the proposer to make sequential proposals over several periods. If responders are myopic maximizers (i.e. consider each period in isolation), the only equilibrium outcome is the serial rule of Arin and Feltkamp (2012) regardless of the order of moves. If all players are farsighted, the serial rule still arises as the unique subgame perfect equilibrium outcome if the order of moves is such that stronger players respond to the proposal after weaker ones.

The Economics of "Why is it so hard to save a threatened Language?"

We study the language choice behavior of bilingual speakers in modern societies, such as the Basque Country, Ireland andWales. These countries have two o cial languages:A, spoken by all, and B, spoken by a minority. We think of the bilinguals in those societies as a population playing repeatedly a Bayesian game in which, they must choose strategically the language, A or B, that might be used in the interaction. The choice has to be made under imperfect information about the linguistic type of the interlocutors. We take the Nash equilibrium of the language use game as a model for real life language choice behavior. It is shown that the predictions made with this model t very well the data about the actual use, contained in the censuses, of Basque, Irish and Welsh languages. Then the question posed by Fishman (2001),which appears in the title, is answered as follows: it is hard, mainly, because bilingual speakers have reached an equilibrium which is evolutionary stable. This means that to solve fast and in a re ex manner their frequent language coordination problem, bilinguals have developed linguistic conventions based chie y on the strategy 'Use the same language as your interlocutor', which weakens the actual use of B.1

Choice under Risk : Theory and Applications

Es útil para estudiantes de postgrado (Master y Doctorado) en cursos de Economía o de Microeconomía en los que se analicen problemas de Decisión en condiciones de Riesgo o Incertidumbre. El documento comienza explicando la Teoría de la Utilidad Esperada. A continuación se estudian la aversión al riesgo, los coeficientes de aversión absoluta y relativa al riesgo, la relación “más averso que” entre agentes económicos y los efectos riqueza sobre las decisiones en algunas relaciones de preferencia utilizadas frecuentemente en el análisis económico. La sección 4 se centra en la comparación entre alternativas arriesgadas en términos de rendimiento y riesgo, considerando la dominancia estocástica de primer y segundo orden y algunas extensiones posteriores de esas relaciones de orden. El documento concluye con doce ejercicios resueltos en los que se aplican los conceptos y resultados expuestos en las secciones anteriores a problemas de decisión en varios contextos