965 resultados para Alternative supplementary cementitious material
Resumo:
The cod stock in the Western Baltic Sea is assessed to be overfished regarding the definitions of the UN World Summit on Sustainable Development at Johannesburg in 2002. Thus, the European Fisheries Council enforced a multi-annual management plan in 2007. Our medium term simulations over the future 10 years assume similar stock productivity as compared with the past four decades and indicate that the goals of the management plan can be achieved through TAC and consistent effort regulations. Taking account of the uncertainty in the recruitment patterns, the target average fishing mortality of age groups 3 – 6 years of F = 0.6 per year as defined in the management plan is indicated to exceed sustainable levels consistent with high long term yields and low risk of depletion. The stipulated constraint of the annual TAC variations of ±15% will dominate future fisheries management and implies a high recovery potential of the stock through continued reductions in fishing mortality. The scientific assessment of sustainable levels of exploitation and consideration in the plan is strongly advised, taking account of uncertainties attributed to environmental and biological effects. We recommend our study to be complemented with economic impact assessments including effects on by-catch species, which have been disregarded in this study. It is further demonstrated, that the goals of the management plan can alternatively be achieved by mesh size adaptations. An alternative technical option of mesh size increases to realize the required reductions in fishing mortality provides avoidance of discards of undersized fish after a few years by means of improved selectivity, another important element of the Common Fisheries Policy. However, it is emphasized that technical regulations since 1990 failed to affect the by-catch and discards of juvenile cod. In any way, the meaningful implementation of the multiannual management plan through stringent control and enforcement appears critical.
Resumo:
Fischfanggeräte werden in der kommerziellen Fischerei und in der Fischereiforschung eingesetzt. In beiden Fällen werden hauptsächlich Schleppnetze verwendet. Schleppnetze sind jedoch nicht für alle Aufgabenstellungen der Fischereiforschung geeignet. Alternative in der Forschung verwendbare Untersuchungsgeräte und Methoden wurden bisher ohne überzeugenden Erfolg getestet. Schleppnetzen – insbesondere den Grundschleppnetzen der Berufsfischerei – werden sowohl die Meeresumwelt schädigende Einflüsse als auch unzureichende selektive Eigenschaften hinsichtlich Ziel- und Beifangarten nachgesagt. Die in der kommerziellen Fischerei der Ostsee verwendeten Schleppnetze üben aber nur einen geringen schädlichen Einfluss auf Bodenorganismen aus. Alternative ökosystemgerechte Fanggeräte wie Fischfallen können Schleppnetze bisher nicht ersetzen. Es werden Möglichkeiten aufgezeigt, die negativen Einflüsse auf die Meeresumwelt noch weiter zu verringern. Durch konstruktive Gestaltung der Schleppnetze (großmaschige Unterblätter im Vornetz, im Oberblatt reduzierte Grundschleppnetze) können Beifänge reduziert werden. Durch weitere Verbesserungen der Beschwerungs- und Spreizelemente an Grundschleppnetzen lassen sich die negativen Einflüsse auf den Meeresboden weiter reduzieren.
Resumo:
After due consideration the EU Commission has decided in December 2005 to admit cod-ends made of netting turned 90 de-grees (T90) as an allowable alternative for the cod fishery of the Baltic. The construction was included as one of two admissibles versions into the newly issued EU regulation 2187/2005 on technical measures for the conservation of fishery resources of the Baltic. This contribution describes some of the investigations preceeding that decision with which some of the previous demurs could be dispelled. In the course of these experiments it was detected that the cod-end netting material plays an important role for the mesh selection of a T90 cod-end, whereas the netting twine diameter is negligible. Problems with modern twine mate-rial have to be taken in consideration for constructional changes of T90 cod-ends. A relation of 1 to 2 in the circumferences in meshes at the joining round between last row of the belly and extension/cod-end turned out to be acceptable. Both the hauling technique (sidetrawler or sterntrawler) and an extensive use in the commercial fishery proved to be of no relevance for to the selection of T90 cod-ends. Taken alone, the different hydrodynamic conditions in a cod-end are insufficient to fully explain the selection phenomena. This was demonstrates by the material-related differences in selectivity of T90 cod-ends.
Resumo:
Este trabajo se basa en los muestreos sobre las percas (Percichthys sp) realizado entre los años 1955 a 1957 por María Luisa Fuster de Plaza y Enrique E. Boschi, ambos investigadores se desempañaban en el Departamento de Investigaciones Pesqueras de la Dirección Nacional de Pesca, dependiente del Ministerio de Agricultura y Ganadería de la Nación de entonces. Las tareas se llevaron a cabo principalmente en varios cuerpos de agua léntica y lóticas de la región de la Patagonia Norte (Provincias de Río Negro, Neuquen y Chubut), y en la provincia de Mendoza. Consisten en datos morfométricos, desarrollo gonadal, fecundidad, contenidos alimenticios, planillas, dibujos, etc. de 80 ejemplares de percas. La autora tuvo a su cargo el análisis de los datos de esos muestreos y las comparaciones con estudios de material más reciente, correspondiente al lago Pellegrini, a partir de 1981.
Resumo:
28 p.
Resumo:
To improve the cod stocks in the Baltic Sea, a number of regulations have recently been established by the International Baltic Sea Fisheries Commission (IBSFC) and the European Commission. According to these, fishermen are obliged to use nets with escape windows (BACOMA nets) with a mesh size of the escape window of 120 mm until end of September 2003. These nets however, retain only fish much larger than the legal minimum landing size would al-low. Due to the present stock structure only few of such large fish are however existent. As a consequence fishermen use a legal alternative net. This is a conventional trawl with a cod-end of 130 mm diamond-shaped meshes (IBSFC-rules of 1st April 2002), to be increased to 140 mm on 1st September 2003, according to the mentioned IBSFC-rule. Due legal alterations of the net by the fishermen (e.g. use of extra stiff net material) these nets have acquired extremely low selective properties, i. e. they catch very small fish and produce great amounts of discards. Due to the increase of the minimum landing size from 35 to 38 cm for cod in the Baltic, the amount of discards has even increased since the beginning of 2003. Experiments have now been carried out with the BACOMAnet on German and Swedish commercial and research vessels since arguments were brought forward that the BACOMA net was not yet sufficiently tested on commercial vessels. The results of all experiments conducted so far, are compiled and evaluated here. As a result of the Swedish, Danish and German initiative and research the European Commission reacted upon this in June 2003 and rejected the increase of the diamond-meshed non-BACOMA net from 130 mm to 140mm in September 2003. To protect the cod stocks in the Baltic Sea more effectively the use of traditional diamond meshed cod-ends with-out escape window are prohibited in community waters without derogation, becoming effective 1st of September 2003. To enable more effective and simplified control of the bottom trawl fishery in the Baltic Sea the principle of a ”One-Net-Rule“ is enforced. This is going to be the BACOMA net, with the meshes of the escape window being 110 mm for the time being. The description of the BACOMA net as given in the IBSFC-rules no.10 (revision of the 28th session, Berlin 2002) concentrates on the cod-end and the escape window but only to a less extent on the design and mesh-composition of the remaining parts of the net, such as belly and funnel and many details. Thus, the present description is not complete and leaves, according to fishermen, ample opportunity for manipulation. An initiative has been started in Germany with joint effort from scientists and the fishery to better describe the entire net and to produce a proposal for a more comprehensive description, leaving less space for manipulation. A proposal in this direction is given here and shall be seen as a starting point for a discussion and development towards an internationally uniform net, which is agreed amongst the fishery, scientists and politicians. The Baltic Sea fishery is invited to comment on this proposal, and recommendations for further improvement and specifications are welcomed. Once the design is agreed by the Baltic Fishermen Association, it shall be proposed to the IBSFC and European Commission via the Baltic Fishermen Association.
Resumo:
A study was embarked upon with the twin objectives of reviewing the Green Revolution Strategy for accelerating fish production in the country and proposing an alternative strategy, a private sector approach. Some of the programmes listed in the Green Revolution are very necessary for developing a viable - fish farming industry and that money spent under such programmes is money well spent. Programmes that are also desirable but need to be considerably expanded were identified. Other programmes have been criticised on the grounds that the method chosen to achieve the desired objectives is fraught with dangers if sufficiently long run view of fisheries development is taken
Resumo:
In account of the decision of the IBSFC (International Baltic Sea Fisheries Commission) to admit alternative codend constructions to the presently legal of diamond meshes with 120 mm mesh opening, since seven years a vivid research activity is encouraged at the fishing technology institutions around the Baltic. Though a center of gravity in this field of research lies in the EUproject BACOMA (participants Finland Sweden, Denmark) also the corresponding national institutes of other Baltic countries (Germany, Poland, Russia) have been active with similar investigations. German experiments in 1999 dealt with the effect of the use of netting made of double instead of single yarn on the selectivity. Further research was done on modifications of codends made from netting turned 90° from its original orientation and on simplified versions of the so-called Multipanel codend which consists of three equal diamond and three square mesh panels. The experiments demonstrated on the one hand a definite deterioration of the selective properties in a codend made from double instead of single yarn. Constructional changes in codends made from netting turned 90° on the other hand brought a further improvement of the selectivity of such codends. Finally, the investigations on the Multipanel codend revealed the overwhelming influence of the square mesh panels on the selectivity success. If in a conventional diamond codend three windows are cut out starting 50 cm from the real end of the codend in such a way that the remaining parts have the same breadth as the square mesh panels to insert, the selective effect of such a codend is remarkably improved. According to further preliminary tests this seems to be nearly independent from the type of material used.
Resumo:
286 p. : il. col.
Resumo:
In this paper, a new definition of SE and CE, which is based on the hexahedron mesh and simpler than Chang's original CE/SE method (the space-time Conservation Element and Solution Element method), is proposed and an improved CE/SE scheme is constructed. Furthermore, the improved CE/SE scheme is extended in order to solve the elastic-plastic flow problems. The hybrid particle level set method is used for tracing the interfaces of materials. Proper boundary conditions are presented in interface tracking. Two high-velocity impact problems are simulated numerically and the computational results are carefully compared with the experimental data, as well as the results from other literature and LS-DYNA software. The comparisons show that the computational scheme developed currently is clear in physical concept, easy to be implemented and high accurate and efficient for the problems considered. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
To meet the demand of modern acoustic absorbing material for which acoustic absorbing frequency region can be readily tailored, we introduced woodpile structure into locally resonant phononic crystal (LRPC) and fabricated an underwater acoustic absorbing material, which is called locally resonant phononic woodpile (LRPW). Experimental results show that LRPW has a strong capability of absorbing sound in a wide frequency range. Further theoretical research revealed that LRPC units and woodpile structure in LRPW play an important role in realization of wide band underwater strong acoustic absorption.