Bibliotecas na saúde… e a saúde nas bibliotecas?

Em arquivos e bibliotecas a presença de fungos é considerada nefasta pelas suas implicações na conservação e leitura de documentos históricos e pela sua associação a problemas de saúde sentidos pelos funcionários e utentes que frequentam estes locais. De acordo com alguns autores, os problemas de saúde mais reportados por funcionários em Bibliotecas e Arquivos são dermatite, rinite, alergias e asma. Embora revestida de inegável importância, existem poucos estudos internacionais sobre a temática e, em Portugal, a contaminação fúngica em ambiente arquivístico e em bibliotecas é ainda muito pouco conhecida. O estudo realizado em quatro Arquivos Portugueses teve como objectivo conhecer a contaminação fúngica, contribuindo para a análise da qualidade do ar interior desses espaços e sua comparação com estudos internacionais. Para isso foram recolhidas amostras de ar e de superfícies e estas foram analisadas por métodos clássicos de cultura e, quando necessário, por métodos de biologia molecular. A avaliação foi feita quantitativa e qualitativamente, considerando os requisitos legais em vigor. No que respeita à análise do ar, o número de unidades formadoras de colónias (UFC)/m3 nunca excedeu as 500 (limite legislado), tendo sido verificada contaminação interior em todos os locais estudados. Comparativamente aos estudos realizados anteriormente em contextos semelhantes foram encontrados níveis elevados de contaminação por leveduras nas amostras de ar analisadas em Arquivos Portugueses. Não foi identificado nenhum fungo patogénico neste estudo, mas em quase todas as amostras estavam presentes fungos potencialmente toxinogénicos. Dentro do grupo dos Aspergillus, o A.versicolor mostrou predominância, tendo este fungo reconhecidas capacidades de emissão de micotoxinas em ambiente de interior. A inclusão de amostras de superfície revelou-se vital para conhecer todo o espectro fúngico existente em cada um dos locais estudados, incluindo a detecção de Stachybotrys chartarum e a do fungo potencialmente queratinofílico, Chrysosporium carmichaelli. Tanto para a saúde como para a conservação, o recente estudo realizado em quatro arquivos permitiu retirar importantes conclusões e reforçar a necessidade de vigilância, sendo também útil para a definição de padrões de qualidade no campo do património cultural.

Influência das áreas verdes no microclima local: um estudo do conjunto habitacional Ponta Negra, Natal/RN

Owing to na intense process of urban development, urban uneasiness and discomfort in the daily life of populations have nowadays, especially in the big cities, become increasingly ordinary issues. Population density, degeneration of central areas and pollution are some of the environmental stressors the urban man is subjected to. The existence of open areas in the urban network contributes to a better movement of the air and transforms salubrity conditions. Yet, it has been noticed that parks and squares are disappearing from the heart of the city districts. In their place there are either unused plots of land where garbage has been dumped or nearly all-paved squares with meager or no vegetation at all. Such areas, when handled properly, play an important role in the city because in addition to being zones for rendering a mild climate they perform social, cultural and hygienic functions. Aiming at demonstrating that proper handling of green areas can favorably influence the local microclimate, we have attempted to develop analysis from the point of view of bioclimatizing attributes of urban form and their relationship to the local microclimate found in the eight open areas located in the Ponta Negra Housing Complex in the city of Natal/RN

Electrolytic cells for plastic waste recycling

The current project assesses potential molten alloy anodes for Solid Oxide Fuel Cells (SOFC) running on solid waste. A detailed phase diagram study was performed to locate probable anode systems. The molten metal oxide system PbO-Sb2O3 was selected as a possible molten alloy anode for this application. A detailed vapour pressure study of this system was performed. Several cells were fabricated to experimentally assess the electrochemical properties of this system. The work reveals several unexpected limiting features such as the incompatibility between the platinum and the chosen alloy. A second cell was built, this time using rhenium wires instead, preventing such reaction. However, the rhenium wire sublimes under oxidizing conditions (air) and the sealing glass and the chosen alloy system react with each other under long term use. Considering all these issues, a third cell design was conceived, surpassing some obstacles and providing some initial information regarding the electrochemical behaviour. The current project shows that many parameters need to be taken into account to ensure materials compatibility. For the PbOSb2O3 system, the high volatility of Sb2O3 was a serious limitation that can only be addressed through the application of new contact wires or sealing materials and conditions. Nonetheless, the project highlights several other potential systems that can be considered, such as Pb11Ge3O17, Pb3GeO5, Pb5Ge3O11, Bi2CuO4, Bi2PdO4, Bi12GeO20.

Henrique Novaes: técnica, território e cidade em uma trajetória profissional: Brasil, primeira metade do século XX

The career of civil engineer Henrique de Novaes, a remarkable figure in the academic, technical and political fields, demonstrates its extensive and relevant work across Brazil in the first half of the twentieth century. It covered from the design of water supply and sewage works, road and rail transport networks, works against drought in the Northeast, hydroelectric and harbor facilities to the urbanization planning and architectural projects, which displays a systematic and multiple production. City and territory conformed to his fields of verification, practical and above all, transformation. The search for understanding of the inclusion of a social actor in this process thus contributes to the specific analysis of the doings of Henrique de Novaes, who graduated at Polytechnic School of Rio de Janeiro in 1906. From a polymorphic activity in different scales, one tries to figure how, through academic education or professional practice, urban history in Brazil can be told or built. The introduction of technological innovations matched the purposes of planning and urban sprawl, as well as met the specifications of regulation and institutionalization of public infrastructure services at the time. The overall plans proposed by the engineer thought of the city as a whole, interconnected to the structural networks. At the same time, the knowledge of a larger physical scale the territory bounces back in the urban in a relationship of reciprocity and completeness. The objective research, therefore, tries to understand the roles played by Henrique de Novaes s works and academic education in the accomplishment of systematic modernization of Brazilian urban space and territory, recovering a little known historical figure by current historiography. It is proposed, as methodological axis, that the study of this professional career configures itself as an essential element for understanding the idea of progress embodied in the technical studies and proposals for improvements and sanitation nationwide in the first half of the twentieth century . The primary sources for the construction of this analysis were technical articles in journals of the period ( Clube de Engenharia , Viação e Revista Brasileira de Engenharia ), and technical reports, government messages, newspaper articles published at the time, autobiographical reports and the engineer s verbal communications with relatives. The work is structured in three chapters: "Biographical traces, academic education and 'technical and political' activities" illustrates the initiation into the technical, public and political environment; Chapter 2, "Technique and territory" outlines his network understanding through sanitation and transport services; Chapter 3 "Technique and City" describes the influence of polytechnics knowledge on the propositions of modernization of cities; Finally, "Final Thoughts: An Evaluation," presents an overview of the affiliations and practice of an engineer in the different scales, and its contribution to the modernization of Brazilian urban and territorial space

Qualidade do ar interior e conforto térmico : um estudo em espaços de estacionamento em Natal/RN

The recent tendency to utilize parking lots for other purposes has demonstrated that more time has been spent by visitors, mainly in great cities. Therefore, this paper investigates the thermal comfort and the air quality indoors in areas specifically used as parking lots by analyzing the direct relation between such environments and vehicular pollution. The thermal comfort and the quality of air indoors in parking lots with different architectonic typology (ground-floor and underground) are also studied, aiming to contribute to the proposition of suitable new areas designated to human usage. Field research was done, in two distinct periods within different weather conditions (January and July) in, two naturally cooled, parking lots located in Natal - RN. The internal environment agents were measured by using tools for air temperature, humidity, speed and direction; interviews with employees and visitors and chemical analysis through appropriate tools to analyze specific material, carbon monoxide and ozone. The results showed that chemical agents densely concentrate mostly in the closed parking space, aggravated by weather conditions, which dissatisfied the visitors. Still, it was shown that architectonic typology, alongside topographical aspects compromise internal environmental conditions, which increases the retention of pollution, leading to dissatisfactory thermal comfort levels and becoming less suitable for usage by visitors considering air and thermal comfort aspects. Consequently, they are not suitable for human stay due to the poor quality of the indoor air

Conversor de energia das ondas em energia elétrica com dispositivo de coluna de água oscilante: simulação numérica e estudo geométrico

Os oceanos representam um dos maiores recursos naturais, possuindo expressivo potencial energético, podendo suprir parte da demanda energética mundial. Nas últimas décadas, alguns dispositivos destinados à conversão da energia das ondas dos oceanos em energia elétrica têm sido estudados. No presente trabalho, o princípio de funcionamento do conversor do tipo Coluna de Água Oscilante, do inglês Oscillating Water Colum, (OWC) foi analisado numericamente. As ondas incidentes na câmara hidro-pneumática da OWC, causam um movimento alternado da coluna de água no interior da câmara, o qual produz um fluxo alternado de ar que passa pela chaminé. O ar passa e aciona uma turbina a qual transmite energia para um gerador elétrico. O objetivo do presente estudo foi investigar a influência de diferentes formas geométricas da câmara sobre o fluxo resultante de ar que passa pela turbina, que influencia no desempenho do dispositivo. Para isso, geometrias diferentes para o conversor foram analisadas empregando modelos computacionais 2D e 3D. Um modelo computacional desenvolvido nos softwares GAMBIT e FLUENT foi utilizado, em que o conversor OWC foi acoplado a um tanque de ondas. O método Volume of Fluid (VOF) e a teoria de 2ª ordem Stokes foram utilizados para gerar ondas regulares, permitindo uma interação mais realista entre o conversor, água, ar e OWC. O Método dos Volumes Finitos (MVF) foi utilizado para a discretização das equações governantes. Neste trabalho o Contructal Design (baseado na Teoria Constructal) foi aplicado pela primeira vez em estudos numéricos tridimensionais de OWC para fim de encontrar uma geometria que mais favorece o desempenho do dispositivo. A função objetivo foi a maximização da vazão mássica de ar que passa através da chaminé do dispositivo OWC, analisado através do método mínimos quadrados, do inglês Root Mean Square (RMS). Os resultados indicaram que a forma geométrica da câmara influencia na transformação da energia das ondas em energia elétrica. As geometrias das câmaras analisadas que apresentaram maior área da face de incidência das ondas (sendo altura constante), apresentaram também maior desempenho do conversor OWC. A melhor geometria, entre os casos desse estudo, ofereceu um ganho no desempenho do dispositivo em torno de 30% maior.

A educação ambiental e a interdisciplinaridade através da horta : um estudo de caso entre duas escolas da cidade de Rio Grande

O presente estudo de caso tem como objetivo relacionar a Educação Ambiental (EA) aos aspectos multidisciplinares de conteúdos das ciências naturais, tendo por base o tema da “horta escolar” e de sua interpretação por estudantes de duas escolas da cidade do Rio Grande/RS, uma delas situada no contexto urbano, e a outra, no meio rural. Para esta análise, consideramos a Escola Estadual de Ensino Fundamental Dr. Pedro Francisco Bertoni em Domingos Petroline e a Escola Estadual de Ensino Fundamental Barão de Cerro Largo no bairro Centro de nossa cidade. Desse modo, realizamos um debate teórico e analítico da escola enquanto possível instrumento de aprendizagem sobre conteúdos científicos relacionados ao meio ambiente, associada a uma abordagem de natureza participativa e lúdica fundada na sensibilização dos atores envolvidos em seus respectivos cenários.Como procedimento metodológico,foi elaborado um questionário discutindo junto às escolas em reuniões agendadas anteriormente e dúvidas pertinentes às questões propostas foram esclarecidas servindo de base para investigação desta pesquisa, feita com aproximadamente vinte e seis alunos entre as duas escolas.Assim,uma parcela de estudantes de ambas as escolas foram envolvidos na coleta de um grupo de questões objetivas e descritivas relacionadas a temas ambientais do cotidiano, realizando-se posteriormente um estudo comparativo entre as respostas de cada escola considerada conforme as faixas etárias nelas existentes.De um modo geral, as manifestações textuais dos educandos foram agrupadas em diferentes eixos tematizados da seguinte forma: Agricultura Orgânica e Interdisciplinaridade/Ensino de Ciências Naturais/Meio Ambiente.Como resultados, podemos compreender que a horta escolar constitui-se numa potencial “laboratório vivo” que transcende até mesmo os domínios da sala de aula, uma vez que se revela como um sistema ecológico em que há interação dinâmica entre todos os seus elementos constitutivos observados de forma direta pelos alunos: o solo, as plantas, a atmosfera e suas relações. Neste sentido, foi possível apreender o potencial ecológico-educativo que a horta proporciona in loco aos interessados em se aprofundar nos complexos mecanismos da natureza, e assim, um melhor entendimento dos conteúdos estudados nas disciplinas de ciências naturais.

Assessment of fungal contamination in a Portuguese maternity unit

A descriptive study was developed to monitor air fungal contamination in one Portuguese maternity. Sixty air samples were collected through impaction method. Air sampling was performed in food storage facilities, kitchen, food plating, canteen, pharmacy, sterilization areas, genecology wards, intensive care unit, operating rooms, urgency and also, outside premises, since this was the place regarded as reference. Besides air samples, forty three samples were collected by swabbing the surfaces using a 10 by 10 cm square stencil. Simultaneously, temperature, relative humidity and particles counting (PM10) were registered. Twenty three species of fungi were identified in air, being the two most commonly isolated the genera Penicillium (41,5%) and Cladosporium (28,4%). Regarding yeasts, only Rhodotorula sp. (45,2%), Trichosporon mucoides (51,6%) and Cryptococcus neoformans (3,2%) were found. Thirteen species of fungi were identified in surfaces, being the most frequent the Penicillium genus (91,6%). Concerning yeasts found in surfaces, four species were identified being Rhodotorula sp. (29,1%) the most frequent. There was no coincidence between prevailing genera indoors and outside premises. Moreover, some places presented fungal species different from the ones isolated outside. In the inside environment, Aspergillus species were isolated in air and surfaces. There was no significant relationship (p>0,05) between fungal contamination and the studied environmental variables. Keywords: air, surfaces, fungal contamination, environmental variables, maternity.

MICROSCALE DIELECTRIC ANTI-REFLECTION COATINGS FOR PHOTOVOLTAICS

In order to power our planet for the next century, clean energy technologies need to be developed and deployed. Photovoltaic solar cells, which convert sunlight into electricity, are a clear option; however, they currently supply 0.1% of the US electricity due to the relatively high cost per Watt of generation. Thus, our goal is to create more power from a photovoltaic device, while simultaneously reducing its price. To accomplish this goal, we are creating new high efficiency anti-reflection coatings that allow more of the incident sunlight to be converted to electricity, using simple and inexpensive coating techniques that enable reduced manufacturing costs. Traditional anti-reflection coatings (consisting of thin layers of non-absorbing materials) rely on the destructive interference of the reflected light, causing more light to enter the device and subsequently get absorbed. While these coatings are used on nearly all commercial cells, they are wavelength dependent and are deposited using expensive processes that require elevated temperatures, which increase production cost and can be detrimental to some temperature sensitive solar cell materials. We are developing two new classes of anti-reflection coatings (ARCs) based on textured dielectric materials: (i) a transparent, flexible paper technology that relies on optical scattering and reduced refractive index contrast between the air and semiconductor and (ii) silicon dioxide (SiO2) nanosphere arrays that rely on collective optical resonances. Both techniques improve solar cell absorption and ultimately yield high efficiency, low cost devices. For the transparent paper-based ARCs, we have recently shown that they improve solar cell efficiencies for all angles of incident illumination reducing the need for costly tracking of the sun’s position. For a GaAs solar cell, we achieved a 24% improvement in the power conversion efficiency using this simple coating. Because the transparent paper is made from an earth abundant material (wood pulp) using an easy, inexpensive and scalable process, this type of ARC is an excellent candidate for future solar technologies. The coatings based on arrays of dielectric nanospheres also show excellent potential for inexpensive, high efficiency solar cells. The fabrication process is based on a Meyer rod rolling technique, which can be performed at room-temperature and applied to mass production, yielding a scalable and inexpensive manufacturing process. The deposited monolayer of SiO2 nanospheres, having a diameter of 500 nm on a bare Si wafer, leads to a significant increase in light absorption and a higher expected current density based on initial simulations, on the order of 15-20%. With application on a Si solar cell containing a traditional anti-reflection coating (Si3N4 thin-film), an additional increase in the spectral current density is observed, 5% beyond what a typical commercial device would achieve. Due to the coupling between the spheres originated from Whispering Gallery Modes (WGMs) inside each nanosphere, the incident light is strongly coupled into the high-index absorbing material, leading to increased light absorption. Furthermore, the SiO2 nanospheres scatter and diffract light in such a way that both the optical and electrical properties of the device have little dependence on incident angle, eliminating the need for solar tracking. Because the layer can be made with an easy, inexpensive, and scalable process, this anti-reflection coating is also an excellent candidate for replacing conventional technologies relying on complicated and expensive processes.

La perception du temps et sa modulation par la température chez les guêpes parasitoïdes

Les modèles d'optimalité postulent que les animaux en quête de ressources utilisent le taux de gain de valeur adaptative pour optimiser plusieurs comportements tels que la répartition du temps lors de l’exploitation d‘un agrégat et l'investissement en progénitures. Bien que la durée de plusieurs comportements doit être régulée, peu d’évidences de la perception du temps sont actuellement disponibles pour les insectes et aucune pour les guêpes parasitoïdes, et ce malgré leur importance en tant que modèles écologiques. De plus, puisque les guêpes parasitoïdes sont poïkilothermes, cette capacité pourrait être affectée par la température. Nous avons supposé que les guêpes parasitoïdes auraient la capacité de percevoir le temps, à la fois de façon prospective (mesure du temps écoulé) et rétrospective (durée d'un événement passé), afin d'optimiser les décisions liées à l'exploitation d’agrégats d’hôtes et à la reproduction. Nous avons également émis l'hypothèse que la température aurait une incidence sur la perception du temps des guêpes parasitoïdes. Pour la mesure prospective du temps, nous avons utilisé la capacité d’apprentissage associatif de Microplitis croceipes (Hymenoptera: Braconidae). Les guêpes ont été entraînées à associer une odeur à la durée d'un intervalle entre des hôtes. Après leur entraînement, elles ont été testées dans un tunnel de vol avec un choix d’odeurs. Les guêpes ont choisi majoritairement l'odeur associée à l'intervalle de temps auquel elles étaient testées. Nous avons également investigué le rôle de la dépense énergétique sur la mesure du temps. Suite à une restriction de mouvement des guêpes pendant l'intervalle de temps entre les hôtes, elles choisissaient aléatoirement dans le tunnel de vol. L'absence de dépense énergétique les aurait rendues incapables de mesurer le temps. La dépense d'énergie est donc un substitut essentiel pour mesurer le temps. Pour la mesure rétrospective du temps, nous avons utilisé le processus d'évaluation de l'hôte de Trichogramma euproctidis (Hymenoptera: Trichogrammatidae). Certains trichogrammes utilisent la durée du transit initial sur l'œuf hôte afin d’en évaluer la taille et d’ajuster le nombre d’œufs à y pondre. Nous avons augmenté artificiellement la durée de transit initiale de T. euproctidis en suspendant l'œuf hôte pour le faire paraître plus gros qu'un œuf de taille similaire. Une augmentation de la durée de transit initiale a augmenté la taille de la ponte. Ceci démontre la capacité de T. euproctidis de mesurer la durée du transit initial, et donc d’une mesure du temps rétrospective. Pour déterminer si la température modifie la mesure du temps dans les espèces poïkilothermes, nous avons utilisé le comportement d’exploitation d’agrégats d’hôtes de T. euproctidis. Les modèles d’optimalités prédisent que les guêpes devraient rester plus longtemps et quitter à un faible taux de gain de valeur adaptative suite à un déplacement de longue durée plutôt que pour un déplacement de courte durée. Nous avons testé l'impact d'un déplacement de 24 h à différentes températures sur l'exploitation d’agrégats d’hôtes. Un déplacement à température chaude augmente le temps de résidence dans l’agrégat et diminue le taux de gain de valeur adaptative au moment de quitter ; ces comportements sont associés à un trajet de longue durée. L'inverse a été observé lors d’un déplacement à une température froide. Les températures chaude et froide ont modulé la mesure du temps en accélérant ou ralentissant l'horloge biologique, faisant paraître le déplacement respectivement plus long ou plus court qu’il ne l’était réellement. Ces résultats démontrent clairement que les guêpes parasitoïdes ont la capacité de mesurer le temps, autant rétrospectivement que prospectivement. Des preuves directes de leur capacité sont maintenant disponibles pour au moins deux espèces de guêpes parasitoïdes, une composante essentielle des modèles d'optimalité. Le rôle de la dépense énergétique dans la mesure du temps a aussi été démontré. Nos résultats fournissent également la preuve de l'impact de la température sur la perception du temps chez les insectes. L'utilisation de la dépense énergétique en tant que proxy pour mesurer le temps pourrait expliquer une partie de sa thermosensibilité, puisque les guêpes parasitoïdes sont poïkilothermes. Cette mesure du temps sensible à la température pourrait affecter des stratégies de lutte biologique. Sur le terrain, au début de la journée, la température de l'air sera similaire à la température de l'air autour des plantes infestées par des parasites, alors qu'elle sera plus chaude pendant la journée. En lutte biologique augmentative, les guêpes parasitoïdes libérées resteraient plus longtemps dans les agrégats d’hôtes que celles relâchées en début de journée.

Architectural-Physical Co-Design of 3D CPUs with Micro-Fluidic Cooling

The performance, energy efficiency and cost improvements due to traditional technology scaling have begun to slow down and present diminishing returns. Underlying reasons for this trend include fundamental physical limits of transistor scaling, the growing significance of quantum effects as transistors shrink, and a growing mismatch between transistors and interconnects regarding size, speed and power. Continued Moore's Law scaling will not come from technology scaling alone, and must involve improvements to design tools and development of new disruptive technologies such as 3D integration. 3D integration presents potential improvements to interconnect power and delay by translating the routing problem into a third dimension, and facilitates transistor density scaling independent of technology node. Furthermore, 3D IC technology opens up a new architectural design space of heterogeneously-integrated high-bandwidth CPUs. Vertical integration promises to provide the CPU architectures of the future by integrating high performance processors with on-chip high-bandwidth memory systems and highly connected network-on-chip structures. Such techniques can overcome the well-known CPU performance bottlenecks referred to as memory and communication wall. However the promising improvements to performance and energy efficiency offered by 3D CPUs does not come without cost, both in the financial investments to develop the technology, and the increased complexity of design. Two main limitations to 3D IC technology have been heat removal and TSV reliability. Transistor stacking creates increases in power density, current density and thermal resistance in air cooled packages. Furthermore the technology introduces vertical through silicon vias (TSVs) that create new points of failure in the chip and require development of new BEOL technologies. Although these issues can be controlled to some extent using thermal-reliability aware physical and architectural 3D design techniques, high performance embedded cooling schemes, such as micro-fluidic (MF) cooling, are fundamentally necessary to unlock the true potential of 3D ICs. A new paradigm is being put forth which integrates the computational, electrical, physical, thermal and reliability views of a system. The unification of these diverse aspects of integrated circuits is called Co-Design. Independent design and optimization of each aspect leads to sub-optimal designs due to a lack of understanding of cross-domain interactions and their impacts on the feasibility region of the architectural design space. Co-Design enables optimization across layers with a multi-domain view and thus unlocks new high-performance and energy efficient configurations. Although the co-design paradigm is becoming increasingly necessary in all fields of IC design, it is even more critical in 3D ICs where, as we show, the inter-layer coupling and higher degree of connectivity between components exacerbates the interdependence between architectural parameters, physical design parameters and the multitude of metrics of interest to the designer (i.e. power, performance, temperature and reliability). In this dissertation we present a framework for multi-domain co-simulation and co-optimization of 3D CPU architectures with both air and MF cooling solutions. Finally we propose an approach for design space exploration and modeling within the new Co-Design paradigm, and discuss the possible avenues for improvement of this work in the future.

An evolutionary squeaky wheel optimisation approach to personnel scheduling

The quest for robust heuristics that are able to solve more than one problem is ongoing. In this paper, we present, discuss and analyse a technique called Evolutionary Squeaky Wheel Optimisation and apply it to two different personnel scheduling problems. Evolutionary Squeaky Wheel Optimisation improves the original Squeaky Wheel Optimisation’s effectiveness and execution speed by incorporating two additional steps (Selection and Mutation) for added evolution. In the Evolutionary Squeaky Wheel Optimisation, a cycle of Analysis-Selection-Mutation-Prioritization-Construction continues until stopping conditions are reached. The aim of the Analysis step is to identify below average solution components by calculating a fitness value for all components. The Selection step then chooses amongst these underperformers and discards some probabilistically based on fitness. The Mutation step further discards a few components at random. Solutions can become incomplete and thus repairs may be required. The repair is carried out by using the Prioritization step to first produce priorities that determine an order by which the following Construction step then schedules the remaining components. Therefore, improvements in the Evolutionary Squeaky Wheel Optimisation is achieved by selective solution disruption mixed with iterative improvement and constructive repair. Strong experimental results are reported on two different domains of personnel scheduling: bus and rail driver scheduling and hospital nurse scheduling.

Turkish Security Policymaking on Nuclear Issues: Conceptualizing Advanced Cooperative Security Strategies

Turkey is a non-nuclear member of a nuclear alliance in a region where nuclear proliferation is of particular concern. As the only North Atlantic Treaty Organization (NATO) member that has a border with the Middle East, Turkish officials argue that Turkey cannot solely rely on NATO guarantees in addressing the regional security challenges. However, Turkey has not been able to formulate a security policy that reconciles its quest for independence, its NATO membership, the bilateral relationship with the United States, and regional engagement in the Middle East. This dissertation assesses the strategic implications of Turkey’s perceptions of the U.S./NATO nuclear and conventional deterrence on nuclear issues. It explores three case studies by the process tracing of Turkish policymakers’ nuclear-related decisions on U.S. tactical nuclear weapons deployed in Europe, national air and missile defense, and Iran’s nuclear program. The study finds that the principles of Turkish security policymaking do not incorporate a fundamentally different reasoning on nuclear issues than conventional deterrence. Nuclear weapons and their delivery systems do not have a defining role in Turkish security and defense strategy. The decisions are mainly guided by non-nuclear considerations such as Alliance politics, modernization of the domestic defense industry, and regional influence. The dissertation argues that Turkey could formulate more effective and less risky security policies on nuclear issues by emphasizing the cooperative security approaches within the NATO Alliance over confrontational measures. The findings of this dissertation reveal that a major transformation of Turkish security policymaking is required to end the crisis of confidence with NATO, redefinition of the strategic partnership with the US, and a more cautious approach toward the Middle East. The dissertation argues that Turkey should promote proactive measures to reduce, contain, and counter risks before they develop into real threats, as well as contribute to developing consensual confidence-building measures to reduce uncertainty.

Influência das áreas verdes no microclima local: um estudo do conjunto habitacional Ponta Negra, Natal/RN

Owing to na intense process of urban development, urban uneasiness and discomfort in the daily life of populations have nowadays, especially in the big cities, become increasingly ordinary issues. Population density, degeneration of central areas and pollution are some of the environmental stressors the urban man is subjected to. The existence of open areas in the urban network contributes to a better movement of the air and transforms salubrity conditions. Yet, it has been noticed that parks and squares are disappearing from the heart of the city districts. In their place there are either unused plots of land where garbage has been dumped or nearly all-paved squares with meager or no vegetation at all. Such areas, when handled properly, play an important role in the city because in addition to being zones for rendering a mild climate they perform social, cultural and hygienic functions. Aiming at demonstrating that proper handling of green areas can favorably influence the local microclimate, we have attempted to develop analysis from the point of view of bioclimatizing attributes of urban form and their relationship to the local microclimate found in the eight open areas located in the Ponta Negra Housing Complex in the city of Natal/RN