Crystal growth and TG-DTA properties of K(2)Ln(NO3)(5).2H(2)O (Ln = La, Ce, Pr, Nd, Sm)

Single crystals of KLnN(Ln=La, Ce, Pr, Nd, Sm) can be grown in water solution with pH approximate to 1 similar to 2 at about 40 degrees C. Crystals of KLnN (Ln=La, Ce, Pr, Nd) are orthorhombic with space group Fdd2. KPrN crystal was grwon and its crystal structure was determined for the first time. The KPrN crystal parameters obtained by the direct method are as follows: a=21.411(3) Angstrom, b=11.2210(10)Angstrom, c=12.208(2) Angstrom, Z=6, R=0.0240. The TG-DTA curves of KLnN(Ln=La,Ce, Pr, Nd, Sm) demonstrate that the processes of dehydration, melt, irreversible phase transition and decomposition of NO3- take place in sequence with the temperature increasing(except KCN). There are three steps in the decomposition of NO3- in KLnN(Ln=La, Nd, Sm) while two steps in KLnN (Ln=Ce, Pr). K(2)Ln(NO3)(5). 2H(2)O are formed at about 225 degrees C by the reaction of the starting materials of KNO3 and Ln(NO3)(3). nH(2)O.

十一钼硅钴杂多蓝H_8[SiMo_(11)Co(H_2O)O_(39)]·20H_2O的合成与晶体结构

采用电解法制备了未见文献报道的杂多蓝H8[SiMo11Co（H2O）O39]·20H2O，通过X-射线衍射测定了其晶体结构，该晶体属单斜晶系，空间群P21；。晶胞参数全矩阵最小二乘法修正至中心原子Si与4个氧形成四面体结构，配原子M（M＝11／12Mo＋1／12Co）与O形成12个MO6八面体结构3个MO6共边形成4个M3O13三金属簇，4个三金属簇与SiO4四面体共角相连形成阴离子结构。

K_2Ln(NO_3)_5·2H_2O(Ln=La,Ce,Pr,Nd,Sm)的晶体生长和热重-差热分析研究

本文生长出了K2Ln（NO3）5.2H2O（Ln=La；Ce；Pr；Nd；Sm）的单晶，并对其进行了晶体结构及差热-热重分析研究．结果表明，K2Ln（NO3）5.2H2O（Ln=La；Ce；Pr；Nd）的晶体属正交晶系，Fdd2空间群．首次生长出KPrN单晶并用直接法解出其晶体结构．解得KPrN的晶胞参数为：a=11．2210（10）,b=21．411（3），c=12．208（2）,Z=6；R=0．0240．对KLnN加热，则依次出现脱水、熔化、不可逆相变和NO的分解过程（K2Ce（NO3）5·2H2O除外）K2Ln（NO3）5·2H2O（Ln＝La；Nd；Sm）的NO分三步分解，K2Ln（NO3）5·2H。O（Ln=Ce；Pr）的NO分两步分解·KNO3和Ln（NO3）3·nH2O的混合物在225℃左右生成K2Ln（NO3）5

硅钨杂多酸在中孔全硅分子筛HMS上的固载及其催化性能

用十二烷基胺代替传统的季铵盐合成了中孔全硅分子筛ＨＭＳ，并将硅钨杂多酸（ＳｉＷ１２）浸渍固载在ＨＭＳ上．用ＸＲＤ，ＦＴ－ＩＲ以及ＮＨ３－ＴＰＤ等手段对ＨＭＳ及不同负载量和焙烧温度的负载催化剂进行了表征．即使在固载量为５０％的ＳｉＷ１２／ＨＭＳ中，ＳｉＷ１２仍保持其Ｋｅｇｇｉｎ结构并均匀分布在载体表面上，没有ＳｉＷ１２晶相生成．同时，在气－固相反应体系中研究了固载在ＨＭＳ上的ＳｉＷ１２在合成乙酸丁酯中的催化性能．实验结果表明，２００℃焙烧可以增强杂多酸与ＨＭＳ内表面之间的相互作用，从而使其对酯化反应活性具有一定的影响，并且固载催化剂在较低反应温度下具有较高的酯化活性，且性能稳定，有一定的应用前景.

精细胶粉的应用研究

研究了６０，８０，１００，１２０目等４种精细胶粉（ＦＲＰ）的基本性能及其在胎面胶中的应用。结果表明，随ＦＲＰ精细化程度增加，掺用５０份ＦＲＰ后ＮＲ硫化胶的拉伸强度和扯断伸长率均有所提高；ＮＲ／ＢＲ并用胎面胶混炼胶的门尼粘度降低，胶料流动性增加，挤出物外观等级提高；ＮＲ／ＢＲ共混硫化胶的拉伸强度、扯断伸长率及热空气老化系数提高，撕裂强度和邵尔Ａ型硬度有所下降，而生热、动态疲劳和磨耗量等均在８０～１００目处出现最佳值。随着ＦＲＰ用量的增加，ＮＲ／ＢＲ硫化胶的拉伸强度、撕裂强度和弹性降低，生热增加，动态疲劳和热空气老化性能则有所改善。

LUMINESCENCE OF DY3+ ENHANCED BY SENSITIZATION

Four types of sensitized luminescence of Dy3+ are reported: (1) by a host having a broad-band spectrum as in Na3Y0.99Dy0.01(VO4)(2); (2) by a sensitizer having a broad-band spectrum as in Ca2B2O5:Dy3+, Bi3+; (3) by a sensitizer having a narrow-band spectrum as in Mg2Gd7.9Dy0.1(SiO4)(6)O-2; (4) by a sensitizer having a broad-band spectrum and energy migration as in Gd compounds such as Ca1.96Pb0.04Gd7.9Dy0.1(SiO4)(6)O-2. The luminescent intensity of Dy3+ can be enhanced in these ways.

A STUDY ON THE LUMINESCENCE PROPERTIES OF EU3+ AND DY3+ IN M(2)RE(8)(SIO4)(6)O-2 (M=MG, CA RE=Y, GD, LA)

In this paper, the luminescence properties of Eu3+ and Dy3+ in the oxyapatites M(2)RE(8)(SiO4)(6)O-2 (M=Mg, Ca; RE=Y, Gd, La) were studied. The spectral characters of Eu3+ were discussed in relation to the crystal structure. The dependence of the red-to-orange intensity ratio and the position of the charge transfer band of Eu3+ and the yellow-to-blue intensity ratio of Dy3+ together with their fluorescence intensities (I-R for Eu3+ and I-Y for Dy3+) On the M(2+) and the substitution of BO45- and PO43- for SiO44- was discussed. Finally, the concentration quenching of Dy3+ luminescence was reported.

VOLTAMMETRY OF CYTOCHROME-C ENTRAPPED IN HYDROGEL MEMBRANE ON GRAPHITE ELECTRODE

The voltammetric behavior of cytochrome c entrapped in hydrogel membranes at paraffin wax-impregnated spectroscopic graphite electrodes (WISGE) was studied in this paper. A pair of well-defined peaks appeared at +70 mV (vs. Ag/AgCl). Beside these two peaks, another pair of peaks emerged at around +225 mV. Further investigations suggested that at least three states of cytochrome c existed in the membranes due to the special structure of the hydrogel. The native conformation of cytochrome c molecules was stabilized by the hydrophilic environment that was formed by the hydroxyl structure of the membranes and facilitated the cytochrome c electron transfer reaction at +70 mV. The molecules directly adsorbed on the surface of the graphite electrode were responsible for the redox peaks at around +225 mV. Whether the adsorption peaks were detectable or not was related to the thickness of membranes and the pre-retaining time before the formation of membranes.

TEMPERATURE EFFECT ON IMPACT FRACTURE-TOUGHNESS AND FRACTURE MECHANISM OF PHENOLPHTHALEIN POLY(ETHER KETONE)

Phenolphthalein poly(ether ketone) (PEK-C) was tested using an instrumented impact tester to determine the temperature effect on the fracture toughness K-c and critical strain energy release rate G(c). Two different mechanisms, namely the relaxation processes and thermal blunting of the crack tip were used to explain the temperature effect on the fracture toughness. Examination of the fracture surfaces revealed the presence of crack growth bands. It is suggested that these bands are the consequence of variations in crack growth along crazes that are formed in the crack tip stress field. As the crack propagates, the stress is relaxed locally, decreasing the growth rate allowing a new bundle of crazes to nucleate along which the crack advances.

COMPARISON OF THE CRACK-GROWTH METHOD AND THE CRACK STRESS WHITENING ZONE METHOD FOR THE FRACTURE-TOUGHNESS DETERMINATION OF PHENOLPHTHALEIN POLY(ETHER KETONE)

Fracture toughness values of phenolphthalein poly(ether ketone) (PEK-C) at 190 degrees C were determined by two different methods, i. e. the conventional crack growth method and the crack stress whitening zone method, which show consistent results. This indicates that the crack stress whitening zone method can be used to determine the crack initiation of some polymers for which the blunting line concept is unsuitable.

La_(2—x)Sr_xCoO_4±λ(x=0～2)的合成,表征和完全氧化催化性能的研究

合成了x值不同的La_(2-x)Sr_xCoO_4±λ(x=0～2)系列复合氧化物.用XRD研究了这一系列氧化物的晶体结构,结果表明x在0.25～1.5之间可形成具有K_2NiF_4结构的复合氧化物.用化学分析方法测定了过渡金属Co的价态和±λ含量与x值的关系.用IR,TPD,TPR,XPS,SEM等方法研究了这类复合氧化物的氧化还原性能,所含不同氧种,考察了对CH_4,CO的完全氧化活性,并对其活性与化学组成及结构间的关系进行了讨论.

涂渍极性及强极性固定相硅膜改性弹性玻璃毛细管柱的研制

本工作研究了极性、强极性固定液直接涂渍在硅膜改性弹性玻璃毛细管内壁上,经优化温度老化色谱柱,成功地研制出OV-225、DEGS、Silar5、Silar9、Silar10等硅膜改性弹性玻璃毛细管柱。各种柱子均具有柱效高、惰性好、热稳定性好的色谱性能。

四苯基卟啉及其金属配合物的裂解色谱研究

四苯基卟啉及其铁、锰等金属配合物是一类具有较大分子量、非挥发性的卟啉衍生物。由于结构和性能上的特点,这类物质成为有机合成中一种新型催化剂。关于这类物质的裂解研究尚未见有文献报道。本文用裂解色谱法(PGC)考察了它们的热裂解

聚三甲硅基丙炔膜表面改性的XPS研究——Ⅰ.用N-溴代丁二酰亚胺的表面改性

用N-溴代丁二酰亚胺的丙酮溶液在回流温度下对三甲硅基丙炔的均聚物和共聚物作了表面改性。XPS的研究表明,试样表面层中Br原子含量随溴化时间的增长而增加,C_(IS)谱变宽且产生来自C-O和C-Br结构的新谱线。红外光谱证明溴化反应产生CH_2Br结构。溴化使膜的气透性发生相应的变化,即α_(O_2/N_2)值增高,P_(O_2)值降低。

EASTMAN-AQ/NIII MODIFIED ELECTRODE CHARACTERIZATION AND APPLICATION IN FLOW-INJECTION DETERMINATION OF CARBOHYDRATES AND AMINO-ACIDS

A novel Eastman-AQ/Ni(II) chemically modified electrode (CME) produced by "double coating step" deposition of a poly(ester sulphonic acid) polymer film and Ni2+-containing crystalline species onto glassy carbon instead of a metallic nickel electrode exhibited stable electrocatalytic oxidation of numerous alpha-hydrogen compounds including carbohydrates, amines and amino acids. In cyclic voltammetry, the electrocatalysis appeared with an irreversible anodic wave at +0.55 V (vs. Ag/AgCl). The CME was adapted for constant-potential amperometric detection of these compounds in flow injection analysis. Using the CME, the linear response concentration range was between 1.0 x 10(-5) and 5.0 x 10(-2) mol/l and the detection limit was 5.0 x 10(-6) mol/l for glucose. The stability of the CME was adequate for routine quantitative application.