Discrepancies in solar irradiation data for Stockholm and Athens

The aim of this study is to evaluate the variation of solar radiation data between different data sources that will be free and available at the Solar Energy Research Center (SERC). The comparison between data sources will be carried out for two locations: Stockholm, Sweden and Athens, Greece. For the desired locations, data is gathered for different tilt angles: 0°, 30°, 45°, 60° facing south. The full dataset is available in two excel files: “Stockholm annual irradiation” and “Athens annual irradiation”. The World Radiation Data Center (WRDC) is defined as a reference for the comparison with other dtaasets, because it has the highest time span recorded for Stockholm (1964–2010) and Athens (1964–1986), in form of average monthly irradiation, expressed in kWh/m2. The indicator defined for the data comparison is the estimated standard deviation. The mean biased error (MBE) and the root mean square error (RMSE) were also used as statistical indicators for the horizontal solar irradiation data. The variation in solar irradiation data is categorized in two categories: natural or inter-annual variability, due to different data sources and lastly due to different calculation models. The inter-annual variation for Stockholm is 140.4kWh/m2 or 14.4% and 124.3kWh/m2 or 8.0% for Athens. The estimated deviation for horizontal solar irradiation is 3.7% for Stockholm and 4.4% Athens. This estimated deviation is respectively equal to 4.5% and 3.6% for Stockholm and Athens at 30° tilt, 5.2% and 4.5% at 45° tilt, 5.9% and 7.0% at 60°. NASA’s SSE, SAM and RETScreen (respectively Satel-light) exhibited the highest deviation from WRDC’s data for Stockholm (respectively Athens). The essential source for variation is notably the difference in horizontal solar irradiation. The variation increases by 1-2% per degree of tilt, using different calculation models, as used in PVSYST and Meteonorm. The location and altitude of the data source did not directly influence the variation with the WRDC data. Further examination is suggested in order to improve the methodology of selecting the location; Examining the functional dependence of ground reflected radiation with ambient temperature; variation of ambient temperature and its impact on different solar energy systems; Im pact of variation in solar irradiation and ambient temperature on system output.

Influence of hydraulics and control of thermal storage in solar assisted heat pump combisystems

This paper studies the influence of hydraulics and control of thermal storage in systems combined with solar thermal and heat pump for the production of warm water and space heating in dwellings. A reference air source heat pump system with flat plate collectors connected to a combistore was defined and modeled together with the IEA SHC Task 44 / HPP Annex 38 (T44A38) “Solar and Heat Pump Systems” boundary conditions of Strasbourg climate and SFH45 building. Three and four pipe connections as well as use of internal and external heat exchangers for DHW preparation were investigated as well as sensor height for charging of the DHW zone in the store. The temperature in this zone was varied to ensure the same DHW comfort was achieved in all cases. The results show that the four pipe connection results in 9% improvement in SPF compared to three pipe and that the external heat exchanger for DHW preparation leads to a 2% improvement compared to the reference case. Additionally the sensor height for charging the DHW zone of the store should not be too low, otherwise system performance is adversely affected

Emissions Characterisation of residential pellet boilers during start-up and stop periods

In this study, gaseous emissions and particles are measured during start-up and stop periods for an over-fed boiler and an under-fed boiler. Both gaseous and particulate matter emissions are continuously measured in the laboratory. The measurement of gaseous emissions includes oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxide and (NO). The emissions rates are calculated from measured emissions concentrations and flue gas flow. The behaviours of the boilers during start-up and stop periods are analysed and the emissions are characterised in terms of CO, NO, TOC and particles (PM2.5 mass and number). The duration of the characterised periods vary between two boilers due to the difference in type of ignition and combustion control. The under-fed boiler B produces higher emissions during start-up periods than the over-fed boiler A. More hydrocarbon and particles are emitted by the under-fed boiler during stop periods. Accumulated mass of CO and TOC during start-up and stop periods contribute a major portion of the total mass emitted during whole operation. However, accumulated mass of NO and PM during start-up and stop periods are not significant as the duration of emission peak is relatively short.

O impacto de reestruturação e privatização na gestão integrada do setor de energia elétrica: análise do setor a partir da abordagem de redes

The Brazilian energetic sector is passing through deep transformations. The restructure is mainly characterized by the passage from a vertical and centrally coordinated system, in hands of the State, to a more horizontal one, with characteristics of a network, in which organizations, such as the National Agency of Electric Energy (ANEEL), the new regulator entity, the Wholesaler Market of Electric Energy (MAE), the National Operator of Electric System (ONS), Eletrobrás and the National Bank of Economic and Social Development (BNDES) are designated as the principals integrators of the system. The objective of the present work was to analyze the influence of the privatization and restructuring processes in the integration of the Brazilian system of electric energy. The analysis was based on the instruments offered by the network approach. The results of the research show that the Brazilian sector of electric energy cannot be considered as a highly integrated network. In this new horizontal configuration, the social actors are affirming its roles, functions and objectives, while the key-organization like ANEEL, ONS, MAE, Eletrobrás, and BNDES are being structured to strengthen its integrative role.

Gestão da informação e sistema de informações policiais em uma delegacia da polícia civil do Estado do Rio de Janeiro: uma abordagem organizacional

A dissertação apresenta o processo de trabalho do inquérito policial como sendo o processo-chave do sistema de informações policiais de uma delegacia de Polícia Civil do Estado do Rio de Janeiro. Faz considerações quanto à gestão e à análise de sistemas, comparando alguns especialistas, para compreensão da organização. Apresenta, também, uma visão da Polícia Civil no presente e a sua história. Disserta sobre a importância da linguagem em sua cultura organizacional e na sua lógica do trabalho apoiada em discursos, e propõe algumas possibilidades de mudanças organizacionais. A metodologia adotada foi a de pesquisa-ação, participante e etnográfica, com tratamento dos dados apoiado nas teorias da informação, da análise de conteúdo do discurso e de sistemas.

Coordenação no sistema agroindustrial da borracha natural : um estudo das relações entre produtores rurais e usinas beneficiadoras paulistas

O enfoque da Nova Economia Institucional é utilizado no estudo de sistemas agroindustriais brasileiros, mas ainda há poucos trabalhos sobre as relações entre produtores rurais e indústrias processadoras. O objetivo deste estudo é aferir o alinhamento das características das transações com os modos de governança adotados na comercialização de borracha natural entre produtores rurais e indústrias de beneficiamento primário. Busca-se confrontar os resultados com as previsões da teoria da Economia dos Custos de Transação, que prevê a adoção da governança mais eficiente, contingenciada ao ambiente transacional. Esta pesquisa utiliza um enfoque pioneiro para o setor. A primeira parte consiste na exploração qualitativa das transações entre produtores rurais e usinas beneficiadoras e na descrição dos elementos que compõe o sistema agroindustrial da borracha natural no Estado de São Paulo. Os resultados desta etapa são utilizados para refinar as hipóteses da etapa quantitativa, que relacionam os modos de governança adotados aos investimentos em ativos específicos, como o plantio de seringueiras, à frequência, à incerteza e à assistência técnica associadas à transação. Os resultados, apesar das limitações devido ao tamanho pequeno da amostra, sugerem que a quantidade de borracha comercializada influi positivamente na adoção de modos de governança mais coordenados e que a recorrência das transações provavelmente está associada a contratos relacionais. A hipótese da endogeneidade é rejeitada.

Análise teórico-experimental do coeficiente de perfomance (COP) de um sistema de refrigeração por jato-compressão

The use of waste heat of energy conversion equipment to produce a cooling effect, consists currently in a very interesting way of efficiency improvement of energy systems. The present research has as intention the theoretical and experimental study of a new intermittent refrigeration system ejector cycle characteristics, with use of waste heat. Initially, was doing a bibliographical survey about the vapor ejector refrigeration system technology. In the following stage was doing a simulation of the corresponding thermodynamic cycle, with preliminarily intention to evaluate the performance of the system for different refrigerants fluids. On the basis of the results of the simulation were selected the refrigerant fluid and developed an experimental group of benches of the refrigeration system considered, where pressure and temperature sensory had been inserted in strategical points of the refrigeration archetype and connected to a computerized data acquisition system for measure the refrigerant fluid properties in the thermodynamic cycle. The test results obtained show good agreement with the literature

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

Avaliação e monitoramento de políticas públicas: criação de um modelo sistêmico aplicado ao Instituto de Assistência Técnica e Extensão Rural do Rio Grande do Norte (EMATER-RN)

The nature of this thesis is interventionist and aims to create an alternative on how to control and evaluate the public policies implementation developed at the Institute for Technical Assistance and Rural Extension of Rio Grande do Norte State. The cenarium takes place in a public institution , classified as a municipality that belongs to the Rio Grande do Norte government and adopts the design science research methodology , where it generates a set of artifacts that guide the development of a computerized information system . To ensure the decisions, the literature was reviewed aiming to bring and highlight concepts that will be used as base to build the intervention. The use of an effective methodology called Iconix systems analysis , provides a software development process in a short time . As a result of many artifacts created by the methodology there is a software computer able of running on the Internet environment with G2C behavior, it is suggested as a management tool for monitoring artifacts generated by the various methods. Moreover, it reveals barriers faced in the public companies environment such as lack of infrastructure , the strength of the workforce and the executives behavior

Pole placement method using the system matrix transfer function and sparsity

This paper presents a pole placement method using both the augmented Jacobian and the corresponding system transfer function matrices. From the manipulation of these matrices a straightforward approach results to get the coefficients of a non-linear system, whose solution gives the parameters of the stabilizers that can provide a pre-specified minimum damping to the system. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Alternative parameters for the continuation power flow method

The conventional Newton's method has been considered inadequate to obtain the maximum loading point (MLP) of power systems. It is due to the Jacobian matrix singularity at this point. However, the MLP can be efficiently computed through parameterization techniques of continuation methods. This paper presents and tests new parameterization schemes, namely the total power losses (real and reactive), the power at the slack bus (real or reactive), the reactive power at generation buses, the reactive power at shunts (capacitor or reactor), the transmission lines power losses (real and reactive), and transmission lines power (real and reactive). Besides their clear physical meaning, which makes easier the development and application of continuation methods for power systems analysis, the main advantage of some of the proposed parameters is that its not necessary to change the parameter in the vicinity of the MLP. Studies on the new parameterization schemes performed on the IEEE 118 buses system show that the ill-conditioning problems at and near the MLP are eliminated. So, the characteristics of the conventional Newton's method are not only preserved but also improved. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Proposal of a Transmission Line Model Based on Lumped Elements: An Analytic Solution

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise dos projetos de desenvolvimento dos vales dos rios Tietê e Paraná

Este artigo avalia as alternativas propostas para a região dos vales dos rios Tietê e Paraná, no estado de São Paulo. Os projetos formalmente elaborados para a região foram analisados através do método da estrutura lógica. Tal método consiste em representar um projeto na forma de uma matriz 4 × 4 cujos elementos permitem a análise do projeto em questão pela utilização de critérios relacionados ao método científico, à análise de sistemas e ao ponto de vista da gerência de programas. Os resultados encontrados demonstraram a inconsistência nos planos e projetos existentes para a região.

A comparison of profilometer and AutoCAD software techniques in evaluation of implant angulation in vitro

Purpose: The aim of this study was to compare 2 different methods of assessment of implants at different inclinations (90 degrees and 65 degrees)-with a profilometer and AutoCAD software. Materials and Methods: Impressions (n = 5) of a metal matrix containing 2 implants, 1 at 90 degrees to the surface and 1 at 65 degrees to the surface, were obtained with square impression copings joined together with dental floss splinting covered with autopolymerizing acrylic resin, an open custom tray, and vinyl polysiloxane impression material. Measurement of the angles (in degrees) of the implant analogs were assessed by the same blinded operator with a profilometer and through analysis of digitized images by AutoCAD software. For each implant analog, 3 readings were performed with each method. The results were subjected to a nonparametric Kruskal-Wallis test, with P <= .05 considered significant. Results: For implants perpendicular to the horizontal surface of the specimen (90 degrees), there were no significant differences between the mean measurements obtained with the profilometer (90.04 degrees) and AutoCAD (89.95 degrees; P=.9142). In the analyses of the angled implants at 65 degrees in relation to the horizontal surface of the specimen, significant differences were observed (P=.0472) between the mean readings with the profilometer (65.73 degrees) and AutoCAD (66.25 degrees). Conclusions: The degrees of accuracy of implant angulation recording vary among the techniques available and may vary depending on the angle of the implant. Further investigation is needed to determine the best test conditions and the best measuring technique for determination of the angle of the implant in vitro.

Short term hydroelectric scheduling combining network flow and interior point approaches

In this paper, short term hydroelectric scheduling is formulated as a network flow optimization model and solved by interior point methods. The primal-dual and predictor-corrector versions of such interior point methods are developed and the resulting matrix structure is explored. This structure leads to very fast iterations since it avoids computation and factorization of impedance matrices. For each time interval, the linear algebra reduces to the solution of two linear systems, either to the number of buses or to the number of independent loops. Either matrix is invariant and can be factored off-line. As a consequence of such matrix manipulations, a linear system which changes at each iteration has to be solved, although its size is reduced to the number of generating units and is not a function of time intervals. These methods were applied to IEEE and Brazilian power systems, and numerical results were obtained using a MATLAB implementation. Both interior point methods proved to be robust and achieved fast convergence for all instances tested. (C) 2004 Elsevier Ltd. All rights reserved.