941 resultados para 3-D phantom


Relevância:

80.00% 80.00%

Publicador:

Resumo:

This review evaluates the outcomes of intrastromal corneal ring segment (ICRS) implantation for the treatment of keratoconus considering a new grading system based on the preoperative visual impairment of the patient. Additionally, a five-year follow-up analysis of patients with stable and progressive keratoconus is performed in order to assess the long term stability of the surgical procedure. Corrected distance visual acuity decreased statistically significantly in patients with mild keratoconus (P < 0.01) but statistically significantly increased in all other grades (P < 0.05). The improvement in visual acuity and the decrease of keratometric and aberrometric values were stable throughout a long period of time in patients with stable keratoconus. In patients with progressive form keratoconus, a significant improvement was found immediately after the procedure, however clinically relevant regression greater than 3 D was observed at the end of the follow up period.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Nesta tese procurou-se demonstrar a valoração do efluente do processamento de pescado por incorporação dos nutrientes em Aphanothece microscopica Nägeli a diferentes temperaturas. Para tanto o trabalho é composto de cinco artigos que objetivaram avaliar sob o ponto de vista do tratamento do efluente pela cianobactéria Aphanothece e a separação e avaliação da biomassa gerada. O primeiro artigo intitula-se “Influência da temperatura na remoção de nutrientes do efluente da indústria de pescado por Aphanothece microscopica Nägeli”, e teve por objetivo avaliar a influência da temperatura (10, 20 e 30ºC) em um sistema de tratamento pela cianobactéria Aphanothece na remoção de matéria orgânica, nitrogênio e fósforo do efluente oriundo do processamento de pescado. A análise dos resultados mostrou que a temperatura influenciou significativamente na remoção de DQO, NTK, N-NH4 + e P-PO4 -3 . Para os experimentos a 20 e 30ºC todos os limites estabelecidos para os parâmetros avaliados foram atingidos. O segundo artigo intitulado “Efeito de coagulantes no efluente da indústria da pesca visando à separação de biomassa quando tratado por cianobactéria” avaliou o efeito da concentração e pH de dois tipos de coagulantes, cloreto férrico (FeCl3) e sulfato de alumínio (Al2(SO4)3), na separação da biomassa da cianobactéria Aphanothece microscopica Nägeli cultivada em efluente da indústria da pesca, assim como a remoção de matéria orgânica e nutrientes do efluente. Os resultados indicaram que o coagulante FeCl3 foi mais eficaz na remoção de todos os parâmetros testados. No que concerne à separação da biomassa, com um número de seis lavagens foi removido cerca de 97,6% da concentração de FeCl3 adicionado inicialmente. O terceiro artigo com o título “Caracterização da biomassa de Aphanothece microscopica Nägeli gerada no efluente da indústria da pesca em diferentes temperaturas de cultivo” avaliou a composição química da biomassa da cianobactéria Aphanothece microscopica Nägeli quando desenvolvida em meio de cultivo padrão BG11 e no efluente do processamento de pescado. O quarto artigo teve como título “Influência do meio de cultivo e temperatura em compostos nitrogenados na cianobactéria Aphanothece microscopica Nägeli” objetivou avaliar o teor de compostos nitrogenados presentes na biomassa da cianobactéria Aphanothece microscopica Nägeli quando cultivada em meio padrão e no efluente da indústria da pesca nas diferentes fases de crescimento. Para o estudo da composição química e nitrogenados no efluente foram realizados experimentos nas temperaturas de 10, 20 e 30ºC. As concentrações de proteína, cinzas e pigmentos aumentaram com o aumento da temperatura. Por outro lado, foi observada uma redução do teor de lipídios e carboidratos com o aumento da temperatura. O íon amônio juntamente com os ácidos nucléicos representa uma importante fração do nitrogênio não protéico presente na biomassa da cianobactéria Aphanothece. Ficou demonstrada a influência do meio de cultivo na concentração de nitrogênio, bem como a determinação de proteína pelo método de Kjeldahl superestima a concentração protéica em cianobactérias. O quinto artigo intitulado “Produção de proteína unicelular a partir do efluente do processamento do pescado: modelagem preditiva e simulação” avaliou a produção de proteína unicelular através do cultivo da cianobactéria Aphanothece microscopica Nägeli no efluente da indústria da pesca. Os dados cinéticos de crescimento celular foram ajustados a quatro modelos matemáticos (Logístico, Gompertz, Gompertz Modificado e Baranyi). Os resultados demonstraram que o modelo Logístico foi considerado o mais adequado para descrever a formação de biomassa. A análise preditiva mostrou a possibilidade da obtenção de 1,66, 18,96 e 57,36 kg.m-3.d-1 de biomassa por volume do reator em 1000 h de processo contínuo, para as temperaturas de 10, 20 e 30ºC, respectivamente.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fondo Margaritainés Restrepo

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This thesis is actually the composition of two separate studies aimed at further understanding the role of incomplete combustion products on atmospheric chemistry. The first explores the sensitivity of black carbon (BC) forcing to aerosol vertical location since BC has an increased forcing per unit mass when it is located above reflective clouds. We used a column radiative transfer model to produce globally-averaged values of normalized direct radiative forcing (NDRF) for BC over and under different types of clouds. We developed a simple column-weighting scheme based on the mass fractions of BC that are over and under clouds in measured vertical profiles. The resulting NDRF is in good agreement with global 3-D model estimates, supporting the column-weighted model as a tool for exploring uncertainties due to diversity in vertical distribution. BC above low clouds accounts for about 20% of the global burden but 50% of the forcing. We estimate maximum-minimum spread in NDRF due to modeled profiles as about 40% and uncertainty as about 25%. Models overestimate BC in the upper troposphere compared with measurements; modeled NDRF might need to be reduced by about 15%. Redistributing BC within the lowest 4 km of the atmosphere affects modeled NDRF by only about 5% and cannot account for very high forcing estimates. The second study estimated global year 2000 carbon monoxide (CO) emissions using a traditional bottom-up inventory. We applied literature-derived emission factors to a variety of fuel and technology combinations. Combining these with regional fuel use and production data we produced CO emissions estimates that were separable by sector, fuel type, technology, and region. We estimated year 2000 stationary source emissions of 685.9 Tg/yr and 885 Tg/yr if we included adopted mobile sources from EDGAR v3.2FT2000. Open/biomass burning contributed most significantly to global CO burden, while the residential sector, primarily in Asia and Africa, were the largest contributors with respect to contained combustion sources. Industry production in Asia, including brick, cement, iron and steel-making, also contributed significantly to CO emissions. Our estimates of biofuel emissions are lower than most previously published bottom-up estimates while our other fuel emissions are generally in good agreement. Our values are also universally lower than recently estimated CO emissions from models using top-down methods.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fondo Margaritainés Restrepo

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fondo Margaritainés Restrepo

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This thesis considers a three- dimensional numerical model based on 3-D Navier— Stokes and continuity equations involving various wind speeds (North west), water surface levels, horizontal shier stresses, eddy viscosity, densities of oil and gas condensate- water mixture flows. The model is used to simulate the prediction of the surface movement of oil and gas condensate slicks from spill accident in the north coasts of Persian Gulf.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The foot of Columbus Avenue in Sandusky, Ohio was the location of Lake Erie steamer service during the years from 1870 to 1930. As this picture shows hundreds of men and women have arrived and parked their automobiles and are preparing to board steamers for Lakeside, Kelleys Island, Cedar Point, and South Bass Island.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fondo Margaritainés Restrepo

Relevância:

80.00% 80.00%

Publicador:

Resumo:

International audience

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This paper deals with the development of an advanced parametrical modelling concept for packaging components of a 24 GHz radar sensor IC used in automotive driver assistance systems. For fast and efficient design of packages for system-in-package modules (SiP), a simplified model for the description of parasitic electromagnetic effects within the package is desirable, as 3-D field computation becomes inefficient due to the high density of conductive elements of the various signal paths in the package. By using lumped element models for the characterization of the conductive components, a fast indication of the design's signal-quality can be gained, but so far does not offer enough flexibility to cover the whole range of geometric arrangements of signal paths in a contemporary package. This work pursues to meet the challenge of developing a flexible and fast package modelling concept by defining parametric lumped-element models for all basic signal path components, e.g. bond wires, vias, strip lines, bumps and balls. © Author(s) 2011. CC Attribution 3.0 License.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Branching tube flow is a common feature of many fields of science and technology, and occurs both in animate and inanimate systems [1]. The transport of aerosol particles is of particular importance in industrial flow networks but also for the respiratory tree [2]. In this analysis a 3-D numerical study is performed to investigate transport and deposition of aerosol particles in branching tubes. Bifurcation tubes designed according to Hess-Murray law [3] but with different branching angles are analyzed. This study covers cyclic flow conditions at frequencies of 0.25 Hz, 0.50 Hz and 0.75 Hz, Stokes numbers ranging between 0.03 and 0.25, and Reynolds numbers up to 3000.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Comunicación presentada en las VII Jornadas Científicas de la SEPHE (Sociedad Española para el Estudio del Patrimonio Histórico–Educativo) y el V Simposium de la Rede Iberoamericano para a Investigação e a Difusão do Patrimônio Histórico Educativo – RIDPHE-L, celebradas en Donostia-San Sebastián del 29 de junio a 1 de julio de 2016.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Toppling analysis of a precariously balanced rock (PBR) can provide insights into the nature of ground motion that has not occurred at that location in the past and, by extension, realistic constraints on peak ground motions for use in engineering design. Earlier approaches have targeted simplistic 2-D models of the rock or modeled the rock-pedestal contact using spring-damper assemblies that require re-calibration for each rock. These analyses also assume that the rock does not slide on the pedestal. Here, a method to model PBRs in three dimensions is presented. The 3-D model is created from a point cloud of the rock, the pedestal, and their interface, obtained using Terrestrial Laser Scanning (TLS). The dynamic response of the model under earthquake excitation is simulated using a rigid body dynamics algorithm. The veracity of this approach is demonstrated by comparisons against data from shake table experiments. Fragility maps for toppling probability of the Echo Cliff PBR and the Pacifico PBR as a function of various ground motion parameters, rock-pedestal interface friction coefficient, and excitation direction are presented. The seismic hazard at these PBR locations is estimated using these maps. Additionally, these maps are used to assess whether the synthetic ground motions at these locations resulting from scenario earthquakes on the San Andreas Fault are realistic (toppling would indicate that the ground motions are unrealistically high).

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Dissertação de mest. em Gestão e Conservação da Natureza, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2006