Flow-targeted inversion-prepared b-TFE coronary MR angiography: initial results in patients.

PURPOSE: Visualization of coronary blood flow in the right and left coronary system in volunteers and patients by means of a modified inversion-prepared bright-blood coronary magnetic resonance angiography (cMRA) sequence. MATERIALS AND METHODS: cMRA was performed in 14 healthy volunteers and 19 patients on a 1.5 Tesla MR system using a free-breathing 3D balanced turbo field echo (b-TFE) sequence with radial k-space sampling. For magnetization preparation a slab selective and a 2D selective inversion pulse were used for the right and left coronary system, respectively. cMRA images were evaluated in terms of clinically relevant stenoses (< 50 %) and compared to conventional catheter angiography. Signal was measured in the coronary arteries (coro), the aorta (ao) and in the epicardial fat (fat) to determine SNR and CNR. In addition, maximal visible vessel length, and vessel border definition were analyzed. RESULTS: The use of a selective inversion pre-pulse allowed direct visualization of the coronary blood flow in the right and left coronary system. The measured SNR and CNR, vessel length, and vessel sharpness in volunteers (SNR coro: 28.3 +/- 5.0; SNR ao: 37.6 +/- 8.4; CNR coro-fat: 25.3 +/- 4.5; LAD: 128.0 cm +/- 8.8; RCA: 74.6 cm +/- 12.4; Sharpness: 66.6 % +/- 4.8) were slightly increased compared to those in patients (SNR coro: 24.1 +/- 3.8; SNR ao: 33.8 +/- 11.4; CNR coro-fat: 19.9 +/- 3.3; LAD: 112.5 cm +/- 13.8; RCA: 69.6 cm +/- 16.6; Sharpness: 58.9 % +/- 7.9; n.s.). In the patient study the assessment of 42 coronary segments lead to correct identification of 10 clinically relevant stenoses. CONCLUSION: The modification of a previously published inversion-prepared cMRA sequence allowed direct visualization of the coronary blood flow in the right as well as in the left coronary system. In addition, this sequence proved to be highly sensitive regarding the assessment of clinically relevant stenotic lesions.

The development of an automatic recognition system for earmark and earprint comparisons

The value of earmarks as an efficient means of personal identification is still subject to debate. It has been argued that the field is lacking a firm systematic and structured data basis to help practitioners to form their conclusions. Typically, there is a paucity of research guiding as to the selectivity of the features used in the comparison process between an earmark and reference earprints taken from an individual. This study proposes a system for the automatic comparison of earprints and earmarks, operating without any manual extraction of key-points or manual annotations. For each donor, a model is created using multiple reference prints, hence capturing the donor within source variability. For each comparison between a mark and a model, images are automatically aligned and a proximity score, based on a normalized 2D correlation coefficient, is calculated. Appropriate use of this score allows deriving a likelihood ratio that can be explored under known state of affairs (both in cases where it is known that the mark has been left by the donor that gave the model and conversely in cases when it is established that the mark originates from a different source). To assess the system performance, a first dataset containing 1229 donors elaborated during the FearID research project was used. Based on these data, for mark-to-print comparisons, the system performed with an equal error rate (EER) of 2.3% and about 88% of marks are found in the first 3 positions of a hitlist. When performing print-to-print transactions, results show an equal error rate of 0.5%. The system was then tested using real-case data obtained from police forces.

Implementation Manual — 3D Engineered Models for Highway Construction: The Iowa Experience; RB33-014, 2015

3D engineered modeling is a relatively new and developing technology that can provide numerous benefits to owners, engineers, contractors, and the general public. This manual is for highway agencies that are considering or are in the process of switching from 2D plan sets to 3D engineered models in their highway construction projects. It will discuss some of the benefits, applications, limitations, and implementation considerations for 3D engineered models used for survey, design, and construction. Note that is not intended to cover all eventualities in all states regarding the deployment of 3D engineered models for highway construction. Rather, it describes how one state—Iowa—uses 3D engineered models for construction of highway projects, from planning and surveying through design and construction.

Pore-scale modeling of two-phase flow instabilities in porous media

Les problèmes d'écoulements multiphasiques en média poreux sont d'un grand intérêt pour de nombreuses applications scientifiques et techniques ; comme la séquestration de C02, l'extraction de pétrole et la dépollution des aquifères. La complexité intrinsèque des systèmes multiphasiques et l'hétérogénéité des formations géologiques sur des échelles multiples représentent un challenge majeur pour comprendre et modéliser les déplacements immiscibles dans les milieux poreux. Les descriptions à l'échelle supérieure basées sur la généralisation de l'équation de Darcy sont largement utilisées, mais ces méthodes sont sujettes à limitations pour les écoulements présentant de l'hystérèse. Les avancées récentes en terme de performances computationnelles et le développement de méthodes précises pour caractériser l'espace interstitiel ainsi que la distribution des phases ont favorisé l'utilisation de modèles qui permettent une résolution fine à l'échelle du pore. Ces modèles offrent un aperçu des caractéristiques de l'écoulement qui ne peuvent pas être facilement observées en laboratoire et peuvent être utilisé pour expliquer la différence entre les processus physiques et les modèles à l'échelle macroscopique existants. L'objet premier de la thèse se porte sur la simulation numérique directe : les équations de Navier-Stokes sont résolues dans l'espace interstitiel et la méthode du volume de fluide (VOF) est employée pour suivre l'évolution de l'interface. Dans VOF, la distribution des phases est décrite par une fonction fluide pour l'ensemble du domaine et des conditions aux bords particulières permettent la prise en compte des propriétés de mouillage du milieu poreux. Dans la première partie de la thèse, nous simulons le drainage dans une cellule Hele-Shaw 2D avec des obstacles cylindriques. Nous montrons que l'approche proposée est applicable même pour des ratios de densité et de viscosité très importants et permet de modéliser la transition entre déplacement stable et digitation visqueuse. Nous intéressons ensuite à l'interprétation de la pression capillaire à l'échelle macroscopique. Nous montrons que les techniques basées sur la moyenne spatiale de la pression présentent plusieurs limitations et sont imprécises en présence d'effets visqueux et de piégeage. Au contraire, une définition basée sur l'énergie permet de séparer les contributions capillaires des effets visqueux. La seconde partie de la thèse est consacrée à l'investigation des effets d'inertie associés aux reconfigurations irréversibles du ménisque causé par l'interface des instabilités. Comme prototype pour ces phénomènes, nous étudions d'abord la dynamique d'un ménisque dans un pore angulaire. Nous montrons que, dans un réseau de pores cubiques, les sauts et reconfigurations sont si fréquents que les effets d'inertie mènent à différentes configurations des fluides. A cause de la non-linéarité du problème, la distribution des fluides influence le travail des forces de pression, qui, à son tour, provoque une chute de pression dans la loi de Darcy. Cela suggère que ces phénomènes devraient être pris en compte lorsque que l'on décrit l'écoulement multiphasique en média poreux à l'échelle macroscopique. La dernière partie de la thèse s'attache à démontrer la validité de notre approche par une comparaison avec des expériences en laboratoire : un drainage instable dans un milieu poreux quasi 2D (une cellule Hele-Shaw avec des obstacles cylindriques). Plusieurs simulations sont tournées sous différentes conditions aux bords et en utilisant différents modèles (modèle intégré 2D et modèle 3D) afin de comparer certaines quantités macroscopiques avec les observations au laboratoire correspondantes. Malgré le challenge de modéliser des déplacements instables, où, par définition, de petites perturbations peuvent grandir sans fin, notre approche numérique apporte de résultats satisfaisants pour tous les cas étudiés. - Problems involving multiphase flow in porous media are of great interest in many scientific and engineering applications including Carbon Capture and Storage, oil recovery and groundwater remediation. The intrinsic complexity of multiphase systems and the multi scale heterogeneity of geological formations represent the major challenges to understand and model immiscible displacement in porous media. Upscaled descriptions based on generalization of Darcy's law are widely used, but they are subject to several limitations for flow that exhibit hysteric and history- dependent behaviors. Recent advances in high performance computing and the development of accurate methods to characterize pore space and phase distribution have fostered the use of models that allow sub-pore resolution. These models provide an insight on flow characteristics that cannot be easily achieved by laboratory experiments and can be used to explain the gap between physical processes and existing macro-scale models. We focus on direct numerical simulations: we solve the Navier-Stokes equations for mass and momentum conservation in the pore space and employ the Volume Of Fluid (VOF) method to track the evolution of the interface. In the VOF the distribution of the phases is described by a fluid function (whole-domain formulation) and special boundary conditions account for the wetting properties of the porous medium. In the first part of this thesis we simulate drainage in a 2-D Hele-Shaw cell filled with cylindrical obstacles. We show that the proposed approach can handle very large density and viscosity ratios and it is able to model the transition from stable displacement to viscous fingering. We then focus on the interpretation of the macroscopic capillary pressure showing that pressure average techniques are subject to several limitations and they are not accurate in presence of viscous effects and trapping. On the contrary an energy-based definition allows separating viscous and capillary contributions. In the second part of the thesis we investigate inertia effects associated with abrupt and irreversible reconfigurations of the menisci caused by interface instabilities. As a prototype of these phenomena we first consider the dynamics of a meniscus in an angular pore. We show that in a network of cubic pores, jumps and reconfigurations are so frequent that inertia effects lead to different fluid configurations. Due to the non-linearity of the problem, the distribution of the fluids influences the work done by pressure forces, which is in turn related to the pressure drop in Darcy's law. This suggests that these phenomena should be taken into account when upscaling multiphase flow in porous media. The last part of the thesis is devoted to proving the accuracy of the numerical approach by validation with experiments of unstable primary drainage in a quasi-2D porous medium (i.e., Hele-Shaw cell filled with cylindrical obstacles). We perform simulations under different boundary conditions and using different models (2-D integrated and full 3-D) and we compare several macroscopic quantities with the corresponding experiment. Despite the intrinsic challenges of modeling unstable displacement, where by definition small perturbations can grow without bounds, the numerical method gives satisfactory results for all the cases studied.

Stable masking by H-2Dd cis ligand limits Ly49A relocalization to the site of NK cell/target cell contact.

Ly49A is an inhibitory receptor, which counteracts natural killer (NK) cell activation on the engagement with H-2D(d) (D(d)) MHC class I molecules (MHC-I) on target cells. In addition to binding D(d) on apposed membranes, Ly49A interacts with D(d) ligand expressed in the plane of the NK cells' membrane. Indeed, multivalent, soluble MHC-I ligand binds inefficiently to Ly49A unless the NK cells' D(d) complexes are destroyed. However, it is not known whether masked Ly49A remains constitutively associated with cis D(d) also during target cell interaction. Alternatively, it is possible that Ly49A has to be unmasked to significantly interact with its ligand on target cells. These two scenarios suggest distinct roles of Ly49A/D(d) cis interaction for NK cell function. Here, we show that Ly49A contributes to target cell adhesion and efficiently accumulates at synapses with D(d)-expressing target cells when NK cells themselves lack D(d). When NK cells express D(d), Ly49A no longer contributes to adhesion, and ligand-driven recruitment to the cellular contact site is strongly reduced. The destruction of D(d) complexes on NK cells, which unmasks Ly49A, is necessary and sufficient to restore Ly49A adhesive function and recruitment to the synapse. Thus, cis D(d) continuously sequesters a considerable fraction of Ly49A receptors, preventing efficient Ly49A recruitment to the synapse with D(d)+ target cells. The reduced number of Ly49A receptors that can functionally interact with D(d) on target cells explains the modest inhibitory capacity of Ly49A in D(d) NK cells. This property renders Ly49A NK cells more sensitive to react to diseased host cells.

Feasibility of Visualization and Simulation Applications to Improve Work Zone Safety and Mobility

Visualization is a relatively recent tool available to engineers for enhancing transportation project design through improved communication, decision making, and stakeholder feedback. Current visualization techniques include image composites, video composites, 2D drawings, drive-through or fly-through animations, 3D rendering models, virtual reality, and 4D CAD. These methods are used mainly to communicate within the design and construction team and between the team and external stakeholders. Use of visualization improves understanding of design intent and project concepts and facilitates effective decision making. However, visualization tools are typically used for presentation only in large-scale urban projects. Visualization is not widely accepted due to a lack of demonstrated engineering benefits for typical agency projects, such as small- and medium-sized projects, rural projects, and projects where external stakeholder communication is not a major issue. Furthermore, there is a perceived high cost of investment of both financial and human capital in adopting visualization tools. The most advanced visualization technique of virtual reality has only been used in academic research settings, and 4D CAD has been used on a very limited basis for highly complicated specialty projects. However, there are a number of less intensive visualization methods available which may provide some benefit to many agency projects. In this paper, we present the results of a feasibility study examining the use of visualization and simulation applications for improving highway planning, design, construction, and safety and mobility.

Feasibility of Visualization and Simulation Applications, Tech Transfer Summary, 2008

Visualization is a relatively recent tool available to engineers for enhancing transportation project design through improved communication, decision making, and stakeholder feedback. Current visualization techniques include image composites, video composites, 2D drawings, drive-through or fly-through animations, 3D rendering models, virtual reality, and 4D CAD. These methods are used mainly to communicate within the design and construction team and between the team and external stakeholders. Use of visualization improves understanding of design intent and project concepts and facilitates effective decision making. However, visualization tools are typically used for presentation only in large-scale urban projects. Visualization is not widely accepted due to a lack of demonstrated engineering benefits for typical agency projects, such as small- and medium-sized projects, rural projects, and projects where external stakeholder communication is not a major issue. Furthermore, there is a perceived high cost of investment of both financial and human capital in adopting visualization tools. The most advanced visualization technique of virtual reality has only been used in academic research settings, and 4D CAD has been used on a very limited basis for highly complicated specialty projects. However, there are a number of less intensive visualization methods available which may provide some benefit to many agency projects. In this paper, we present the results of a feasibility study examining the use of visualization and simulation applications for improving highway planning, design, construction, and safety and mobility.

Développement de l'interprétation quantitative de la sismique réflexion lacustre : application de l'AVO aux sédiments quaternaires dans le lac Léman

Résumé Des développements antérieurs, au sein de l'Institut de Géophysique de Lausanne, ont permis de développer des techniques d'acquisition sismique et de réaliser l'interprétation des données sismique 2D et 3D pour étudier la géologie de la région et notamment les différentes séquences sédimentaires du Lac Léman. Pour permettre un interprétation quantitative de la sismique en déterminant des paramètres physiques des sédiments la méthode AVO (Amplitude Versus Offset) a été appliquée. Deux campagnes sismiques lacustres, 2D et 3D, ont été acquises afin de tester la méthode AVO dans le Grand Lac sur les deltas des rivières. La géométrie d'acquisition a été repensée afin de pouvoir enregistrer les données à grands déports. Les flûtes sismiques, mises bout à bout, ont permis d'atteindre des angles d'incidence d'environ 40˚ . Des récepteurs GPS spécialement développés à cet effet, et disposés le long de la flûte, ont permis, après post-traitement des données, de déterminer la position de la flûte avec précision (± 0.5 m). L'étalonnage de nos hydrophones, réalisé dans une chambre anéchoïque, a permis de connaître leur réponse en amplitude en fonction de la fréquence. Une variation maximale de 10 dB a été mis en évidence entre les capteurs des flûtes et le signal de référence. Un traitement sismique dont l'amplitude a été conservée a été appliqué sur les données du lac. L'utilisation de l'algorithme en surface en consistante a permis de corriger les variations d'amplitude des tirs du canon à air. Les sections interceptes et gradients obtenues sur les deltas de l'Aubonne et de la Dranse ont permis de produire des cross-plots. Cette représentation permet de classer les anomalies d'amplitude en fonction du type de sédiments et de leur contenu potentiel en gaz. L'un des attributs qui peut être extrait des données 3D, est l'amplitude de la réflectivité d'une interface sismique. Ceci ajoute une composante quantitative à l'interprétation géologique d'une interface. Le fond d'eau sur le delta de l'Aubonne présente des anomalies en amplitude qui caractérisent les chenaux. L'inversion de l'équation de Zoeppritz par l'algorithme de Levenberg-Marquardt a été programmée afin d'extraire les paramètres physiques des sédiments sur ce delta. Une étude statistique des résultats de l'inversion permet de simuler la variation de l'amplitude en fonction du déport. On a obtenu un modèle dont la première couche est l'eau et dont la seconde est une couche pour laquelle V P = 1461 m∕s, ρ = 1182 kg∕m3 et V S = 383 m∕s. Abstract A system to record very high resolution (VHR) seismic data on lakes in 2D and 3D was developed at the Institute of Geophysics, University of Lausanne. Several seismic surveys carried out on Lake Geneva helped us to better understand the geology of the area and to identify sedimentary sequences. However, more sophisticated analysis of the data such as the AVO (Amplitude Versus Offset) method provides means of deciphering the detailed structure of the complex Quaternary sedimentary fill of the Lake Geneva trough. To study the physical parameters we applied the AVO method at some selected places of sediments. These areas are the Aubonne and Dranse River deltas where the configurations of the strata are relatively smooth and the discontinuities between them easy to pick. A specific layout was developed to acquire large incidence angle. 2D and 3D seismic data were acquired with streamers, deployed end to end, providing incidence angle up to 40˚ . One or more GPS antennas attached to the streamer enabled us to calculate individual hydrophone positions with an accuracy of 50 cm after post-processing of the navigation data. To ensure that our system provides correct amplitude information, our streamer sensors were calibrated in an anechoic chamber using a loudspeaker as a source. Amplitude variations between the each hydrophone were of the order of 10 dB. An amplitude correction for each hydrophone was computed and applied before processing. Amplitude preserving processing was then carried out. Intercept vs. gradient cross-plots enable us to determine that both geological discontinuities (lacustrine sediments/moraine and moraine/molasse) have well defined trends. A 3D volume collected on the Aubonne river delta was processed in order ro obtain AVO attributes. Quantitative interpretation using amplitude maps were produced and amplitude maps revealed high reflectivity in channels. Inversion of the water bottom of the Zoeppritz equation using the Levenberg-Marquadt algorithm was carried out to estimate V P , V S and ρ of sediments immediately under the lake bottom. Real-data inversion gave, under the water layer, a mud layer with V P = 1461 m∕s, ρ = 1182 kg∕m3 et V S = 383 m∕s.

Microwave spectrometry for the Evaluation of the structural integrity of metallic stents

Purpose: To assess the feasibility of a method based on microwave spectrometry to detect structural distortions of metallic stents in open air conditions and envisage the prospects of this approach toward possible medical applicability for the evaluation of implanted stents. Methods: Microwave absorbance spectra between 2.0 and 18.0 GHz were acquired in open air for the characterization of a set of commercial stents using a specifically design setup. Rotating each sample over 360º, 2D absorbance diagrams were generated as a function of frequency and rotation angle. To check our approach for detecting changes in stent length (fracture) and diameter (recoil), two specific tests were performed in open air. Finally, with a few adjustments, this same system provides 2D absorbance diagrams of stents immersed in a water-based phantom, this time over a bandwidth ranging from 0.2 to 1.8 GHz. Results: The authors show that metallic stents exhibit characteristic resonant frequencies in their microwave absorbance spectra in open air which depend on their length and, as a result, may reflect the occurrence of structural distortions. These resonances can be understood considering that such devices behave like dipole antennas in terms of microwave scattering. From fracture tests, the authors infer that microwave spectrometry provides signs of presence of Type I to Type IV stent fractures and allows in particular a quantitative evaluation of Type III and Type IV fractures. Recoil tests show that microwave spectrometry seems able to provide some quantitative assessment of diametrical shrinkage, but only if it involves longitudinal shortening. Finally, the authors observe that the resonant frequencies of stents placed inside the phantom shift down with respect to the corresponding open air frequencies, as it should be expected considering the increase of dielectric permittivity from air to water. Conclusions: The evaluation of stent resonant frequencies provided by microwave spectrometry allows detection and some quantitative assessment of stent fracture and recoil in open air conditions. Resonances of stents immersed in water can be also detected and their characteristic frequencies are in good agreement with theoretical estimates. Although these are promising results, further verifica tion in a more relevant phantom is required in order to foresee the real potential of this approach.

The role of cisplatin and NAMI-A plasma-protein interactions in relation to combination therapy

The aim of the study is to evaluate the differences of protein binding of NAMI-A, a new ruthenium drug endowed with selective antimetastatic properties, and of cisplatin and to ascertain the possibility to use two drugs based on heavy metals in combination to treat solid tumour metastases. For this purpose, we have developed a technique that allows the proteins, to which metal drugs bind, to be identified from real protein mixtures. Following incubation with the drugs, the bands containing platinum and/or ruthenium are separated by native PAGE, SDS-PAGE and 2D gel electrophoresis, and identified using laser ablation inductively coupled plasma mass spectrometry. Both drugs interact with essentially the same proteins which, characterised by proteomics, are human serum albumin precursor, macroglobulin alpha 2 and human serotransferrin precursor. The interactions of NAMI-A are largely reversible whereas cisplatin forms stronger interactions that are less reversible. These data correlate well with the MCa mammary carcinoma model on which full doses of NAMI-A combined with cisplatin show additive effects as compared to each treatment taken alone, independently of whether NAMI-A precedes or follows cisplatin. Furthermore, the implication from this study is that the significantly lower toxicity of NAMI-A, compared to cisplatin, could be a consequence of differences in the mode of binding to plasma proteins, involving weaker interactions compared to cisplatin.

Searching for Novel Cellular Targets of the Hepatitis C Virus NS3-4A Protease

Background: The hepatitis C virus (HCV) NS3-4A protease isnot only an essential component of the viral replication complexand a prime target for antiviral intervention but also a key playerin the persistence and pathogenesis of HCV. It cleaves andthereby inactivates two crucial adaptor proteins in viral RNAsensing and innate immunity (MAVS and TRIF) as well as aphosphatase involved in growth factor signaling (TC-PTP). Theaim of this ongoing study is to identify novel cellular targets ofthe NS3-4A protease.Methods: Cell lines inducibly expressing the NS3-4A proteasewere established using a tetracycline-regulated geneexpression system. Cells were analyzed in basal as well asinterferon-α-stimulated states. Two-dimensional difference gelelectrophoresis (2D-DIGE) and stable isotopic labeling usingamino acids in cell culture (SILAC) proteomics analysescoupled with mass spectrometry were employed to search forcellular substrates of NS3-4A.Results: A number of candidate cellular targets have beenidentified by these proteomics approaches. These are currentlybeing validated by different experimental techniques. In parallel,we are in the process of further defining the determinants forsubstrate specificity of the NS3-4A protease.Conclusions: The identification of novel cellular targets of theHCV NS3-4A protase should yield new insights into thepathogenesis of hepatitis C and may reveal novel targets forantiviral intervention.

Oxidative stress in aging: advances in proteomic approaches

Aging is a gradual, complex process in which cells, tissues, organs, and the whole organism itself deteriorate in a progressive and irreversible manner that, in the majority of cases, implies pathological conditions that affect the individual"s Quality of Life (QOL). Although extensive research efforts in recent years have been made, the anticipation of aging and prophylactic or treatment strategies continue to experience major limitations. In this review, the focus is essentially on the compilation of the advances generated by cellular expression profile analysis through proteomics studies (two-dimensional [2D] electrophoresis and mass spectrometry [MS]), which are currently used as an integral approach to study the aging process. Additionally, the relevance of the oxidative stress factors is discussed. Emphasis is placed on postmitotic tissues, such as neuronal, muscular, and red blood cells, which appear to be those most frequently studied with respect to aging. Additionally, models for the study of aging are discussed in a number of organisms, such as Caenorhabditis elegans, senescence-accelerated probe-8 mice (SAMP8), naked mole-rat (Heterocephalus glaber), and the beagle canine. Proteomic studies in specific tissues and organisms have revealed the extensive involvement of reactive oxygen species (ROS) and oxidative stress in aging.

Changes of MAP2 phosphorylation during brain development.

The microtubule-associated protein MAP2 is essential for development of early neuronal morphology and maintenance of adult neuronal morphology. Several splice variants exist, MAP2a-d, with a lack of MAP2a in cat brain. MAP2 is widely used as a neuronal marker. In this study we compared five monoclonal antibodies (MAbs) against MAP2. They show differences in the immunocytochemical distribution of MAP2 isoforms during development of the visual cortex and cerebellum of the cat. Local and temporal differences were seen with MAb AP18, an antibody directed against a phosphorylation-dependent epitope near the N-terminal end. In large pyramidal dendrites in visual cortex, the AP18 epitope remained in parts immunoreactive after treatment with alkaline phosphatase. Three MAbs, AP14, MT-01, and MT-02, recognized the central region of the MAP2b molecule, which is not present in MAP2c and 2d, and reacted with phosphorylation-independent epitopes. During the first postnatal week the immunostaining in cerebellum differed between antibodies in that some cellular elements in external and internal granular layers and Purkinje cells were stained to various degrees, whereas at later stages staining patterns were similar. At early stages, antibody MT-02 stained cell bodies and dendrites in cerebral cortex and cerebellum. With progressing maturation, immunoreactivity became restricted to distal parts of apical dendrites of pyramidal cells and was absent from perikarya and finer proximal dendrites in cortex. MT-02 did not stain MAP2 in cerebellum of adult animals. This study demonstrates that the immunocytochemical detection of MAP2 depends on modifications such as phosphorylation and conformational changes of the molecule, and that MAP2 staining patterns differ between MAbs. Phosphorylation and specific conformations in the molecule may be essential for modulating function and molecular stability of MAP2, and monoclonal antibodies against such sites may provide tools for studying the functional role of modifications.

Role of CLOCK and circadian rhythms in calcium homeostasis

Le maintien d'une concentration sanguine constante de calcium est d'une importance cruciale et trois organes participent à la balance calcique normale : les reins, les intestins et les os. La concentration plasmatique de calcium est strictement régulée par l'hormone parathyroïdienne (PTH) et par la vitamine D. Des variations circadiennes de la PTH, de la vitamine D ainsi que du calcium plasmatique ont été décrites précédemment chez l'humain ainsi que chez le rat. Ces rythmes de PTH dans le sérum sont importants pour la régulation du remodelage de l'os. En effet, il a été montré chez les souris C57BL/6J que des injections de PTH une fois par jour mènent à une augmentation de la densité minérale de l'os alors que l'infusion en continu de PTH est associée à une diminution de cette densité. La vitamine D joue également un rôle fondamental dans la physiologie osseuse, car un déficit en vitamine D peut conduire à une ostéomalacie. Cependant la fonction des oscillations de vitamine D au niveau de l'homéostasie osseuse reste inconnue. L'horloge circadienne est un système interne de contrôle biologique du temps générant des rythmes de 24 heures dans l'expression des gènes, ainsi que dans la physiologie et le comportement. Ce contrôle s'opère par des boucles rétroactives positives et négatives de l'expression de gènes circadiens tels que CLOCK, BMAL1, CRY1 et 2 ou PERI et 2. Dans ce travail, nous avons émis l'hypothèse que l'homéostasie calcique est sous le contrôle de l'horloge circadienne. Dans un premier temps, nous avons montré chez les souris C57BL/6J des variations journalières des concentrations de calcium, de PTH et de vitamine D dans le sang, ainsi que de calcium dans les urines. Nous avons également démontré des changements au niveau de l'expression rénale des gènes importants dans l'homéostasie du calcium, tant au niveau de l'ARN messager que des protéines. Ensuite, pour analyser le rôle du système de l'horloge circadienne dans l'homéostasie du calcium, nous avons étudié des souris dans lesquelles a été supprimé le gène CLOCK crucial pour la fonction de l'horloge et nous avons comparé ces souris à des souris de type sauvage de même portée. Les souris CLOCK-I- étaient hypercalciuriques à chaque moment de la journée. Cependant le rythme circadien de l'excrétion de calcium était préservé. Le taux de calcium plasmatique ne différait pas entre les génotypes, mais les souris CLOCK -/- ne montraient pas de variations journalières de ce paramètre. Une perte du rythme journalier était également observée pour les niveaux de vitamine D, perte qui pourrait être une cause de l'altération de la micro-architecture osseuse révélée chez les souris CLOCK-/-. En effet, ces souris montrent une diminution du nombre de trabécules, de leur volume ainsi que de leur surface, ce qui suggère la présence d'ostéoporose. Nous avons également trouvé que le rythme de l'expression de l'ARN messager de CYP27B1 était aboli dans les reins des souris CLOCK -/-, ce qui peut expliquer l'altération du rythme de la vitamine D. Les taux sanguins de PTH étaient comparables entre les souris CLOCK -/- et de type sauvage. Dans les reins, une augmentation de l'expression de l'ARN messager de TRPV5 et NCX1 a été constatée, ce qui suggérerait une augmentation de la réabsorption de calcium dans le tubule convoluté distal et dans le tubule connecteur. Dans les intestins, la réabsorption calcique était diminuée, chez les souris CLOCK-I-, fait confirmé par une diminution des niveaux d'ARN messager de TRPV6 et PMCAL. En résumé, la suppression du gène CLOCK chez les souris a conduit à une hypercalciurie, une altération du rythme des taux plasmatiques de calcium et de vitamine D et à une détérioration de l'architecture osseuse. Pour conclure, ces résultats montrent que l'horloge circadienne est essentielle à l'homéostasie calcique ainsi qu'à la physiologie des os. - L'ostéoporose affecte environ 22 millions de femmes et 5.5 millions d'hommes en Europe, réduisant significativement leur qualité de vie et a causé 3.5 millions de nouvelles fractures en 2010. Les dépenses totales liées à ces fractures ont atteint 37 milliards d'euro et ce coût devrait augmenter de 25% d'ici à 2025. Le nombre de nouvelles fractures dues à l'ostéoporose à travers le monde est estimé à environ 1000 par heure. Parmi les causes de l'ostéoporose, le déficit én calcium et/ou en vitamine D joue un rôle important, mais il existe également des causes génétiques ou liées à des facteurs comme les hormones sexuelles (estrogènes, testostérone), l'âge, le tabac, le poids corporel, certains médicaments,... La vie est rythmique : ceci est dû à l'alternance naturelle du jour et de la nuit et de ses effets sur le corps. La prise alimentaire, par exemple, est un processus qui a lieu pendant la phase active, qui est prévisible (il se produit toujours au même moment) et qui peut être anticipé par le corps. Pour cela, une horloge interne est présente dans chaque cellule du corps et est synchronisée par la lumière du jour, entre autres stimuli. Cette horloge indique la phase du jour et régule l'expression de gènes impliqués dans les différents processus qui nécessitent une anticipation. Pendant mon travail de thèse, je me suis demandé si des îythmes circadiens (c'est-à-dire d'une durée d'environ 24 heures et indépendants des stimuli externes) étaient observables'pour les gènes régulant les flux de calcium dans le corps et si l'interruption de ces rythmes pouvait mener à des altérations de la qualité de l'os. J'ai d'abord travaillé avec des souris normales et j'ai pu montrer la présence de rythmes au niveau du calcium sanguin et urinaire, mais également au niveau des hormones et gènes qui contrôlent le métabolisme du calcium dans le corps, comme la vitamine D et l'hormone parathyroidienne. De manière intéressante, j'ai observé que la plupart de ces gènes ont un rythme synchronisé. J'ai ensuite utilisé un modèle de souris dans lequel l'horloge interne a été génétiquement invalidée et j'ai montré que ces souris présentent une augmentation de leur excrétion urinaire de calcium et un rythme circadien altéré de la vitamine D dans le sang. Ces souris absorbent aussi moins bien le calcium intestinal et présentent une ostéoporose marquée. Ce travail montre donc que l'horloge interne est nécessaire pour établir un rythme circadiens de certains facteurs influant les flux de calcium dans l'organisme, comme la vitamine D, et que la perturbation de ces rythmes mène à une dérégulation du métabolisme osseux. Ainsi, la perturbation de l'horloge interne peut causer une ostéoporose et une hypercalciurie qui pourraient aboutir à la formation de fractures et de calculs rénaux. L'extrapolation de ces observations chez l'homme ou à des changements plus subtiles des rythmes circadiens, comme le décalage horaire, restent à montrer. Cette recherche a démontré que les rythmes circadiens des mécanismes de régulation des flux de calcium dans l'organisme sont essentiels au maintien d'un squelette normal et suggère que les perturbations des rythmes circadiens pourraient être une nouvelle cause de l'ostéoporose. - Maintaining constant calcium concentration in the plasma is of a crucial importance and three organs participate in normal calcium balance - kidney, gut and bone. Plasma calcium concentration is strictly regulated by parathyroid hormone (PTH) and vitamin D. Circadian variations of PTH, vitamin D and plasma calcium were previously described in humans, as well as in rats. Rhythms in serum PTH are important for balanced bone remodelling. Indeed in C57BL/6J mice, PTH injection once per day leads to an increase in bone mineral density (BMD), whilst continuous infusion is associated with decreased BMD. Vitamin D also plays a crucial role in bone physiology, since the deficiency in vitamin D can lead to rickets/osteomalacia. However, the role of vitamin D rhythms in bone homeostasis remains unknown. The circadian clock is an. internal time-keeping system generating rhythms in gene expression with 24h periodicity, in physiology and in behaviour. It is operated by positive- and negative-feedback loops of circadian genes, such as CLOCK, BMAL1, CRY1 and 2 or PERI and 2. In this work, we hypothesized, that calcium homeostasis is under the control of the circadian clock. First, we showed daily variations in urinary calcium and serum calcium, PTH and l,25(OH)2 vitamin D, together with renal mRNA and protein levels of genes involved in calcium homeostasis in C57BL/6J mice. Second, and to investigate the role of the circadian clock system in calcium handling, we studied mice lacking the gene CLOCK crucial for fonction of the clock system and compared them to the WT littermates. CLOCK-/- mice were hypercalciuric at all timepoints of the day. However, the circadian rhythm of calcium excretion was preserved. Serum calcium levels did not differ between the genotypes, but CLOCK-/- mice did not exhibit daily variation for this parameter. Loss of rhythm was observed also for serum l,25(OH)2 vitamin D levels, which may be one of the causes of altered bone microarchitecture that was revealed in CLOCK-/- mice. They displayed increased trabecular separation and decreased trabecular number, trabecular bone volume and trabecular bone surface, suggestive of osteoporosis. We found that the rhythm of the mRNA expression of CYP27B1 was abolished in the kidney of CLOCK-/- mice, which could induce the altered rhythm of l,25(OH)2 vitamin. Serum PTH levels were comparable between CLOCK-/- and WT mice. In the kidney, increased mRNA expression of TRPV5 and NCX1 suggests increased calcium reabsorption in the distal convoluted and connecting tubule. In the gut, intestinal calcium absorption was decreased in CLOCK¬/- mice, confirmed by decreased mRNA levels of TRPV6 and PMCA1. In summary, deletion of the CLOCK gene in mice conducts to hypercalciuria, alteration of the rhythm in serum calcium and l,25(OH)2D levels, and impainnent of their bone microarchitecture. In conclusion, these data show that the circadian clock system is essential in calcium homeostasis and bone physiology.

A two-dimensional doppler-radiometer for earth observation

Compared to synthetic aperture radars (SARs), the angular resolution of microwave radiometers is quite poor. Traditionally, it has been limited by the physical size of the antenna. However, the angular resolution can be improved by means of aperture synthesis interferometric techniques. A narrow beam is synthesized during the image formation processing of the cross-correlations measured at zero-lag between pairs of signals collected by an array of antennas. The angular resolution is then determined by the maximum antenna spacing normalized to the wavelength (baseline). The next step in improving the angular resolution is the Doppler-Radiometer, somehow related to the super-synthesis radiometers and the Radiometer-SAR. This paper presents the concept of a three-antenna Doppler-Radiometer for 2D imaging. The performance of this instrument is evaluated in terms of angular/spatial resolution and radiometric sensitivity, and an L-band illustrative example is presented.