Yield and quality of net melon cultivated in sand in the greenhouse

The behavior of two hybrids of muskmelon ('Bônus no 2' and 'Don Carlos') in relation to the productivity and quality of its fruits, making use of fertigation in sand substrate in protected environment, was studied. Amianthus cement structures of the Canalete runlet type were used to keep the plants 0.30m from each other and 1.0m between lines. 'Don Carlos' hybrid had fruit mean weight, longitudinal and transversal diameter, pulp mean thickness, and total acidity substantially superior in relation to 'Bônus no 2'. Considering the total soluble solid content, 'Bônus no 2' had better results. However, there was no significant difference in fruits/plant or pulp thickness between the two hybrids.

Variance heterogeneity for milk yield in Brazilian and Colombian Holstein herds

Heterogeneity of variances for milk yield (MY) was determined for Brazilian and Colombian herds. The herds were grouped as high or low variability within each country, using as criterion the phenotypic standard deviation (PSD) of MY in the contemporary groups of cows, from the first to the sixth calving. Brazilian and Colombian herds with PSD greater than 1,168 kg or 1,012 kg, respectively, were classified as high variability while the herd groups with values lower than those were classified as low variability. The genetic parameters for MY within each herd group were estimated using bivariate analysis in an animal model and the restricted maximum likelihood method with a derivative free algorithm, using 72,280 first lactations of cows, daughters of 1,880 sires. Heterogeneous variances were found, and Brazilian herds with high PSD had the greatest additive and residual genetic variances and heritability coefficients for MY. MY genetic correlation coefficients between herds of high and low variability within each country were 0.96 and 0.93 while between countries they varied from 0.72 to 0.81, suggesting that there was a reclassification of animals in the two countries and also heterogeneity of variances. This phenomenon leads to the questioning of the strategy of imported semen usage and the need to do genetic evaluations to identify sires with greater genetic potential for (sub) tropical environmental conditions.

Yield and fruit size distribution of processing tomato cultivars

The productivity and fruit size distribution of 28 processing tomato cultivars were analyzed to determine the ones with potential for fresh market. The experiment was done in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), in a Haplorthox soil, from June to December. The cultivars H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511 were evaluated. The experimental design was randomized blocks, with four repetitions, and five plants per experimental unit. Fruits harvested from each experimental unit were counted, classified by transversal diameter (large, medium, small, very small and cull) and then weighed. Cultivars AG 72, H 9498, Hypeel 45, RPT 1095 and Curicó yielded more than 70 fruits per plant, on average. The total production per plant of cultivars AG 72, H 9498, Hypeel 45, H 7155, Hypeel 108, Halley, Hitech, RPT 1095, H 9494, H 9036 and Curicó was greater than 4 kg. Considering the weight of large and medium fruits, categories which are important for fresh market, the cultivars H 2710, Botu 13, U 573, Hypeel 45, Yuba, RPT 1294 and Ipa 6 presented values above 50% for production.

Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Factors that cause genotype by environment interaction and use of a multiple-trait herd-cluster model for milk yield of Holstein cattle from Brazil and Colombia

Descriptive herd variables (DVHE) were used to explain genotype by environment interactions (G x E) for milk yield (MY) in Brazilian and Colombian production environments and to develop a herd-cluster model to estimate covariance components and genetic parameters for each herd environment group. Data consisted of 180,522 lactation records of 94,558 Holstein cows from 937 Brazilian and 400 Colombian herds. Herds in both countries were jointly grouped in thirds according to 8 DVHE: production level, phenotypic variability, age at first calving, calving interval, percentage of imported semen, lactation length, and herd size. For each DVHE, REML bivariate animal model analyses were used to estimate genetic correlations for MY between upper and lower thirds of the data. Based on estimates of genetic correlations, weights were assigned to each DVHE to group herds in a cluster analysis using the FASTCLUS procedure in SAS. Three clusters were defined, and genetic and residual variance components were heterogeneous among herd clusters. Estimates of heritability in clusters 1 and 3 were 0.28 and 0.29, respectively, but the estimate was larger (0.39) in Cluster 2. The genetic correlations of MY from different clusters ranged from 0.89 to 0.97. The herd-cluster model based on DVHE properly takes into account G x E by grouping similar environments accordingly and seems to be an alternative to simply considering country borders to distinguish between environments.

Low-grade endometrial stromal sarcoma presenting as vaginal nodule

Endometrial stromal sarcoma is a rare neoplasm of the uterus. Extrauterine locations of this neoplasm, excluding metastases or local extension, are even more unusual and are usually associated with the presence of endometriosis. The authors report a case of endometrial stromal sarcoma presenting as a vaginal wall nodule, without any sign of primary uterine tumor after extensive evaluation or presence of endometriosis. The morphology, immunohistochemical profile, differential diagnoses, and pathogenesis are discussed, as well as a review of the literature on this issue. © 2004 Elsevier Inc. All rights reserved.

Final stages of the Brasiliano Orogenesis in SE Brazil: U-Pb and 40Ar/39Ar evidence for overprinting of the Brasília Belt by the Ribeira Belt Tectonics

Around the southern margins of the São Francisco Craton, there is a zone of tectonic interference between the Brasília belt to the west and the younger Ribeira belt to the east. U-Pb monazite and 40Ar/39Ar cooling age determinations carried out in the area reveal the cooling histories of these belts and the timing of tectonic overprint, unraveling the final stages of Brasiliano Orogeny in SE Brazil. The U-Pb monazite data from migmatized paragneisses and late-stage pegmatites in the Socorro-Guaxupé Nappe System of the southern Brasília belt show that migmatization peaked between ca. 613±1 and 607±3 Ma. 40Ar/39Ar biotite and muscovite ages of paragneisses and schists in this area indicate that the northern high-grade core of the Nappe System (Guaxupé Domain) was uplifted and cooled through the 350°C isotherm between 599±1 and 587±1 Ma. In contrast, samples from the southern high-grade core of the Nappe System, the Socorro Domain, south of the Jacutinga shear zone, yields a broader and younger spectrum of 40Ar/39Ar biotite ages between 571±1 and 562±1 Ma, attributed to a later uplift and cooling of the crust. The cooling ages can be assigned to local resetting of the 40Ar/39Ar system during transpressive tectonic overprint due to reactivation as a result of collision of the Ribeira belt. A younger group of 40Ar/39Ar mica ages (537±1 to 521±1Ma) in schists of the Socorro Domain, are associated with transpressional structures of the Ribeira belt. Rock samples from the Jacutinga and Três Corações shear zones, yield 40Ar/39Ar biotite-muscovite ages around 520 Ma. These are typical cooling ages of the Ribeira belt, and are interpreted to mark the western limit of the Ribeira belt transpressional regime within the Brasília belt. The youngest biotite-muscovite cooling ages in schists of the Socorro Domain, between 510±2 and 491±1 Ma, mark the final cooling and exhumation of that part of the Brasília belt.

Water table effects on bean yield and nitrate distribution in the soil profile

In order to evaluate the bean yield under different water table levels as well as the moisture and nitrate distribution in the soil profile, a field experiment was carried out at the experimental area from the College of Agronomic Sciences - UNESP, Botucatu, SP, Brazil. Beans were grown in field lysimeters and subjected to five water table depths:30; 40; 50; 60 and 70 cm. The moisture in the soil profile was gravimetrically determined through samples obtained at 10; 20; 30; 40; 50; 60 and 70cm of depth. The water table depths of 30cm and 40cm showed the highest productivities (3,228.4 kg.ha-1 and 3,422.1 kg.ha-1, respectively), showing no statistical differences between each other. The highest productivity was related to the two most elevated water table levels (30 and 40cm), which provided the highest moisture average values on basis of volume in the soil profile (33.3 e 31%) as well as the consumptive use of water (416 and 396 mm). The nitrate content during the bean cycle at the extraction depth of 60cm has been under the safe drinking limit of 10 mg.1-1 for water table depths of 30; 40; 50 and 60cm, showing the denitrification effectiveness as a way of controlling water table from nitrate pollution. The water table handling allowed the attainment of high bean productivity levels, as well as the reduction of the nitrate level.

Genetic variation in growth traits and yield of rubber trees (Hevea brasiliensis) growing in the Brazilian state of São Paulo

Analysis of variance and covariance was preformed on growth traits (stem girth, bark thickness, total height gain and rubber yield) of 22 open-pollinated progenies of the rubber tree Hevea brasiliensis from an Asian Hevea collection introduced to Agronomic Institute (Instituto Agronômico, Campinas, São Paulo, Brazil; IAC) in 1952. This progeny trial was replicated at three sites in São Paulo state and it was found that at three years from sowing there was statistically significant variation for girth, bark thickness, height and rubber yield. An individual test sites, values of individual plant heritability for girth ranged from ĥ i 2 = 0.36 to ĥ i 2 = 0.89 whereas values for heritability for progeny means ranged from ĥ i 2 = 0.77 to ĥ i 2 = 0.87. These moderate and high heritabilities suggest that a combination of progeny and within-progeny selection would be effective at increasing girth in this population at individual sites. Across sites, values of individual-plant heritability for girth ranged from ĥ i 2 = 0.36 to ĥ i 2 = 0.47, whereas values for heritability of progeny means girth ranged from ĥ x̄ 2 = 0.77 to ĥ x̄ 2 = 0.87. There were high positive genetic correlations between increased girth and bark thickness suggesting that breeding aimed at increasing girth would also increase bark thickness and possibly height. Copyright by the Brazilian Society of Genetics.

Immunohistochemistry as a fundamental tool for the differential diagnosis of polymorphous low-grade adenocarcinoma

Polymorphous low-grade adenocarcinoma (PLGA) is a subtype of salivary gland carcinoma with a marked predilection for the minor salivary glands. The diagnosis of this lesion can be a challenge in incisional biopsies because of its similarity to other salivary neoplasms and the difficulty of analyzing its infiltrative nature and neurotropism. Diagnosis can be facilitated, however, by immunohistochemistry, a technique that has become a fundamental tool to the pathologist. The purpose of this study was analyze the immunohistochemical aspects of 4 cases that were examined in the São José dos Campos School of Dentistry. The patients included 4 women, ages 32 to 57 years (mean, 50 years), who reported an intraoral painless lesion, ranging in size from 1 to 3 cm (mean, 1.75 cm) with a variable evolution period. Histologically, the lesions showed similar aspects, characterized by polymorphous growth pattern, including solid, cribriform, trabecular, papillary, and single-file arrays. The tumors showed positivity to cytokeratins (Cks) 7 and 8 and vimentin, variable expression for Ck 14, and a negative reaction to Cks 13 and 19 and muscle-specific actin. PLGA is a tumor of the salivary gland that must be distinguished from other neoplasms for therapeutic and prognostic considerations, and the panel of antibodies employed in this study was effective for its diagnosis.

Agronomic effectiveness of cationic phosphate impurities present in superphosphate fertilizers as affected by soil pH

The general concept that low-water-soluble phosphorus (P) fertilizers should be more agronomically effective when applied to acidic soils was developed based on sources containing mainly calcium (Ca)-P compounds, but it may not hold true for sources with different chemical composition. To obtain information related to this issue, two important iron (Fe)-potassium (K)-P compounds present in superphosphates [Fe 3 KH 8 (PO 4 ) 6·6H 2 O, H8, and Fe 3 KH 14 (PO 4 ) 8·4H 2 O, H14] were prepared and characterized. These P sources were used to provide 30 and 60 mg P kg -1 as neutral ammonium citrate (NAC)+H 2 O-soluble P. Reagent-grade monocalcium phosphate (MCP) was used as a standard P source with high water solubility with an additional rate of 120 mg P kg -1 included. Also, mixtures of both Fe-K-P compounds and MCP were prepared to provide 0, 25, 50, 75, and 100% of the total P as MCP. All sources were applied to a clayey loamy acid soil (pH 5.3) classified as Rhodic Kanhapludult. The soil was incubated at two rates (0 and 10 g kg -1 ) of lime, which resulted in pH 5.4 and 6.8. Upland rice was cultivated to maturity. The H14 compound confirmed to be a highly effective source of P for the rice plants at both soil pH, as opposed to the H8, which was poorly effective when applied alone. When mixed with water-soluble P (WSP), the H8 was able to provide P to the plants with the maximum yield of upland rice reached with 54.8 and 80.5% of WSP for pH 5.4 and 6.8, respectively. The high agronomic performance of the H14 compound clearly indicates that this low-water-soluble P source cannot be deemed as ineffective at high soil pH. Copyright © Taylor & Francis Group, LLC.

Meat yield of Callinectes bocourti A. Milne Edwards, 1879 (Crustacea, Portunidae) in Iguape, São Paulo, Brazil

The objective of the present study was to analyze the meat yield for both sexes of the crab Callinectes bocourti in the region of Iguape, Brazil. The carapace width for males was 78.1-114.0 mm (96.7 ± 9.5 mm) and for females 76.0-106.3 mm (93.0 ± 7.8 mm). In males, the total wet weight ranged from 65.53 to 224.36 g (134.04 ± 40.77 g) and for females from 56.66 to 164.74 g (105.93 ± 26.88 g). A comparison of morphological structures revealed that the greatest meat yield was in the carapace (55.1%), followed by the right chela (16.9%), the left chela (15.9%), and the legs (12.1%). The total yield from the males (28.5%) was slightly higher than that from the females (22.1%). In general, portunids yield more meat than other crab species. The results of this study will allow the optimization of meat production for this crab species. Manual meat removal makes the process more expensive. This activity could offer an alternative to the fishing communities that live exclusively from this fishery resource. © 2007 Escuela de Ciencias del Mar Pontificia Universidad Católica de Valparaíso.

Path analysis and expected response in indirect selection for grain yield in soybean

This study aimed to determine the best auxiliary trait for indirect selection of soybean grain yield, through path analysis and in avoidance of the adverse effects of multicollinearity and expected response. Seventy-nine F5 soybean genotypes from the cross FT-Cometa x Bossier were used. The populations were distributed on the field was the families inserted with replicated controls. Primary and secondary traits of grain yield were evaluated in four phenotypically superior plants per family. The traits number of pods, height and number of nodes were considered as the most important, showing the best combination of direct effect and genotypic correlation. The number of pods achieved the highest expected gain through the estimation method based on the selection differential. On the other hand, plant height, by the method based on selection intensity, was not a good indicator of the most productive plants.

Water table effects on bean yield and nitrate distribution in the soil profile

In order to evaluate the bean yield under different water table levels as well as the moisture and nitrate distribution in the soil profile, a field experiment was carried out in the experimental area of the College of Agricultural Sciences - UNESP, Botucatu, SP, Brazil. Beans were grown in field lysimeters under five water table depths: 30; 40; 50; 60 and 70 cm. The moisture in the soil profile was determined gravimetrically using samples collected at 10; 20; 30; 40; 50; 60 and 70 cm deep. The water table depths of 30cm and 40cm showed the highest productivities (3,228.4kg.ha-1 and 3,422.1kg.ha-1, respectively), with no statistical differences between them. The highest productivity was related to the two highest water table levels (30 and 40cm), which provided the highest moisture average values on the basis of volume in the soil profile (33.3 e 31%) as well as the consumptive use of water (416 and 396mm). The nitrate content during the bean cycle at the extraction depth of 60cm was below the safe drinking limit of 10mg.1-1 for water table depths of 30; 40; 50 and 60cm, which shows the denitrification efficiency as a way of controlling nitrate pollution in water tables. The management of water table can lead to high levels of bean yield and to a better control of nitrate pollution in underground water.

Alternative to peat for Agaricus brasiliensis yield

Casing layer is one of the most important components of Agaricus spp. production and it directly affects mushroom productivity, size and mass. The aim of this study was to evaluate potential raw materials as a casing layer and their effect on Agaricus brasiliensis productivity. Raw materials from Brazil with potential use were selected and characterized, and the most promising ones were tested as casing layers for mushroom yield. Evaluated raw materials included lime schist, vermiculite, eucalyptus sawdust, sand, São Paulo peat, Santa Catarina peat, subsoil and charcoal. Particle size, porosity and water absorption in relation to mushroom yield for casing layers were determined. Lime schist, an alternate casing layer to peat, is presented and the effects of the casing layer on the mushroom yield are discussed. © 2009 Elsevier Ltd. All rights reserved.