Genetic variability of residual variance of production traits in Nellore beef cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização de água produzida na indústria de petróleo para fins de descarte e otimização do processo de separação óleo/água

The oil industry has several segments that can impact the environment. Among these, produced water which has been highlight in the environmental problem because of the great volume generated and its toxic composition. Those waters are the major source of waste in the oil industry. The composition of the produced water is strongly dependent on the production field. A good example is the wastewater produced on a Petrobras operating unit of Rio Grande do Norte and Ceará (UO-RNCE). A single effluent treatment station (ETS) of this unit receives effluent from 48 wells (onshore and offshore), which leads a large fluctuations in the water quality that can become a complicating factor for future treatment processes. The present work aims to realize a diagnosis of a sample of produced water from the OU - RNCE in compliance to certain physical and physico-chemical parameters (chloride concentration, conductivity, dissolved oxygen, pH, TOG (oil & grease), nitrate concentration, turbidity, salinity and temperature). The analysis of the effluent is accomplished by means of a MP TROLL 9500 Multiparameter probe, a TOG/TPH Infracal from Wilks Enterprise Corp. - Model HATR - T (TOG) and a MD-31 condutivimeter of Digimed. Results were analyzed by univariated and multivariated analysis (principal component analysis) associated statistical control charts. The multivariate analysis showed a negative correlation between dissolved oxygen and turbidity (-0.55) and positive correlations between salinity and chloride (1), conductivity, chloride and salinity (0.70). Multivariated analysis showed there are seven principal components which can explain the variability of the parameters. The variables, salinity, conductivity and chloride were the most important variables, with, higher sampling variance. Statistical control charts have helped to establish a general trend between the physical and chemical evaluated parameters

Utilização de métodos estatísticos multivariados na caracterização do mosaico sucessional em floresta semidecídual

O presente trabalho objetivou verificar a possibilidade da utilização de métodos estatísticos multivariados na caracterização das fases do desenvolvimento do mosaico sucessional de um trecho de floresta estacional semidecidual, através de variáveis estruturais. Foram alocadas parcelas de 10 m x 10 m, em que se procedeu à análise estrutural, ou seja, levantamento fitossociológico acrescido das variáveis Porcentagem de Cobertura (PC), Altura do Dossel (AD) e Cobertura por Lianas (CL). Os métodos estatísticos empregados foram Análise de Componentes Principais e Análise de Agrupamento, mais especificamente Classificação Hierárquica Ascendente. O primeiro componente principal explicou 43,96% da variância total, enquanto o segundo, 25,66%. As variáveis Área Basal (AB), Diâmetro Médio (DM) e Dominância Média (DOM) apresentaram correlações positivas entre si superiores a 0,75, podendo ser DM e DOM consideradas como um grupo de variáveis. As variáveis Número de Indivíduos (NI) e Número de Espécies (NE) apresentaram correlação 0,60, enquanto AD, CL e PC baixas correlações com as demais, indicando a importância da inclusão destas na análise. A classificação hierárquica e a partição dos grupos em quatro foram feitas considerando os dois primeiros eixos fatoriais. Os resultados indicaram dois comportamentos diferenciados: 1) valores baixos para AD e AB: Grupo 1, com valores baixos também para NI, NE e PC (fase de clareira); e Grupo 2, com valores elevados para NI e CL e baixos para DOM e DM (fase de construção); e 2) valores altos para AD e AB: Grupo 3, com valores altos também para NI, NE e PC e valor baixo para CL (fase madura); e Grupo 4, com valores elevados para DOM e DM e mais baixos para CL (fase de degradação). Os métodos estatísticos multivariados permitiram caracterizar as fases do desenvolvimento do mosaico sucessional, através das variáveis estruturais. A forma como foram estimadas as variáveis AD, CL e PC, porém, deve ser aprimorada, assim como é preciso incluir variáveis que discriminem melhor cada fase.

ANÁLISE DESCRITIVA QUANTITATIVA da AGUARDENTE DE CANA DURANTE O ENVELHECIMENTO em TONEL DE CARVALHO (Quercus alba L.)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

IgE antibody response to the main antigenic component of Paracoccidioides brasiliensis in patients with paracoccidioidomycosis

Paracoccidioidomycosis (PCM) has two main clinical presentations, a chronic form (CF) and an acute, more severe form (AF). The AF is associated with a more marked dysfunction of the patient's immune response, and a distinct anti-Paracoccidioides brasiliensis immunoglobulin (Ig)A and IgG antibody subclass expression, compared with that seen in the CF. In this study we investigated the presence of IgE antibodies against the main P. brasiliensis antigen (a 43-kDa molecule) in the serum of PCM patients using an enzyme-linked immunosorbent assay. We found that 100% of the AF patients (n = 16) produced IgE antibodies, mostly at high levels, whereas only 9 (27%) out of 33 CF patients produced this isotype. Interestingly, these nine patients presented higher serological titers on the counter-immunoelectrophoresis assays than did those who did not produce IgE; a finding that suggests that they had a relatively more severe disease. As IgE is a characteristic feature of the AF patients, and switching to a positive IgE response is dependent on interleukin-4, our results support the notion that the relatively more severe impairment of cellular immunity in the AF is probably related to a Th-2 pattern of immune response.

Carbon fiber non-crimp multi-axial reinforcement and epoxy mono-component system composite: fatigue behavior

Fiber reinforced polymer composites have been widely applied in the aeronautical field. However, composite processing, which uses unlocked molds, should be avoided in view of the tight requirements and also due to possible environmental contamination. To produce high performance structural frames meeting aeronautical reproducibility and low cost criteria, the Brazilian industry has shown interest to investigate the resin transfer molding process (RTM) considering being a closed-mold pressure injection system which allows faster gel and cure times. Due to the fibrous composite anisotropic and non homogeneity characteristics, the fatigue behavior is a complex phenomenon quite different from to metals materials crucial to be investigated considering the aeronautical application. Fatigue sub-scale specimens of intermediate modulus carbon fiber non-crimp multi-axial reinforcement and epoxy mono-component system composite were produced according to the ASTM 3039 D. Axial fatigue tests were carried out according to ASTM D 3479. A sinusoidal load of 10 Hz frequency and load ratio R = 0.1. It was observed a high fatigue interval obtained for NCF/RTM6 composites. Weibull statistical analysis was applied to describe the failure probability of materials under cyclic loads and fractures pattern was observed by scanning electron microscopy. (C) 2010 Published by Elsevier Ltd.

Hydrogen embrittlement in an AISI 1045 steel component of the sugarcane industry

This paper will present a failure analysis of a chain component, manufactured with AISI 1045 steel and used for sugarcane transport. During the fabrication process, this component is submitted to induction hardening, just on one surface, before the galvanizing process. The occurrence of surface cracks, during storage, disables the usage of these components. Chemical and metallographic analyses, tensile, fracture toughness, and hardness tests, and fractography were conducted in order to determine the causes of failure. The steel chemical composition was in accordance with AISI 1045. The metallographic analyses and fractography did not exhibit the presence of zinc into the cracks; this is an indication that the cracks occurred after the galvanizing process. Tensile and fracture toughness test results are as expected. The crack surface and the fracture toughness specimen surfaces showed two different fracture micromechanisms: dimples and intergranular. The delayed fracture associated with the predominance of intergranular fracture micromechanism at the induction hardened layer and the high hardness level is a clear indication of the hydrogen embrittlement. (c) 2008 Elsevier Ltd. All rights reserved.

Estudo da eficácia do tensoativo sorbitano tween 80 veiculado em nanoemulsão contendo óleo de soja, como inibidor de corrosão

Nowadays, the use of chemicals that satisfactorily meet the needs of different sectors of the chemical industry is linked to the consumption of biodegradable materials. In this context, this work contemplated biotechnological aspects with the objective of developing a more environmentally-friendly corrosion inhibitor. In order to achieve this goal, nanoemulsion-type systems (NE) were obtained by varying the amount of Tween 80 (9 to 85 ppm) a sortitan surfactant named polyoxyethylene (20) monooleate. This NE-system was analyzed using phase diagrams in which the percentage of the oil phase (commercial soybean oil, codenamed as OS) was kept constant. By changing the amount of Tween 80, several polar NE-OS derived systems (O/W-type nanoemulsion) were obtained and characterized through light scattering, conductivity and pH, and further subjected to electrochemical studies. The interfacial behavior of these NE-OS derived systems (codenamed NE-OS1, S2, S3, S4 and S5) as corrosion inhibitors on carbon steel AISI 1020 in saline media (NaCl 3.5%) were evaluated by measurement of Open Circuit Potential (OCP), Polarization Curves (Tafel extrapolation method) and Electrochemical Impedance Spectroscopy (EIS). The analyzed NE-OS1 and NE-OS2 systems were found to be mixed inhibitors with quantitative efficacy (98.6% - 99.7%) for concentrations of Tween 80 ranging between 9 and 85 ppm. According to the EIS technique, maximum corrosion efficiency was observed for some tested NE-OS samples. Additionaly to the electrochemical studies, Analysis of Variance (ANOVA) and Principal Component Analysis (PCA) were used, characterization of the nanoemulsion tested systems and adsorption studies, respectively, which confirmed the results observed in the experimental analyses using diluted NE-OS samples in lower concentrations of Tween 80 (0.5 1.75 ppm)

Sebaceous metaplasia in a canine mammary gland non-infiltrative carcinoma with myoepithelial component

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Between freedom and reclusion: Social support as a quality-of-life component in the family caregiver-dependent person binomial

This is a qualitative study which uses Grounded Theory as its methodological framework and Symbolic Interactionism as a theoretical base to understand the experience of family caregivers for Cerebrovascular Accident (CVA) patients with regard to social support during their rehabilitation process at home. The components (themes and categories) of the phenomenon assuming home care and specifically the themes assuming care with support and assuming care without support were inter-related for the purpose of comparison and analysis, in order to apprehend how the interaction between them occurred, It was observed that, in addition to the recovery of the patient's autonomy, social support is one of the intervenient components in the quality of life for the family caregiver-disabled person binomial, particularly with respect to the caregiver's freedom to resume his/her life plan.

Parturition intervals and distributions of parturitions by months of buffalo in Southern and South-eastern Brazil

Reproductive rate is an important component of economic success in livestock production. Parturition interval (IEP) is a direct measure of the productivity of the animal. Long IEP reduce the number of calves produced per year. The objective this study was to determine the distribution of parturitions across month and to evaluate factors affecting IEP. The data included 7,588 parturitions of Murrah, Mediterranean and Carabobo buffalo from 10 herds in Southern and South-eastern Brazil. The analysis of distribution of parturitions evaluated the effects of month, year and their interaction on birth date of calves by using a Chi-Square test in SAS PROC FREQ (SAS Institute, Cary, NC, USA). Parturition intervals (n = 2,630) were evaluated using analysis of variance in SAS PROC GLM. The model for IEP included the fixed effects of season (December to May = 1, June to November = 2), year, season x year, sex of the preceding parturition, age of weaning of the previous calf, and herd. All sources of variation were significant (P<0.0001) except sex of the preceding parturition (P <0.85). The mean IEP was 446.7 +/- 10.4 days, for seasons 1 and 2 IEP were 419.8 +/- 11.3 and 473.6 +/- 40.7 days, respectively, a difference of 54 days. As weaning age increased there was a lengthening of IEP. Buffalo in Brazil showed seasonal parturition with calving concentrated from January to April, although the frequency by month differed across years (P<0.0001). These months also had the lowest calving interval.

Fatigue and Fluoride Corrosion on Streptococcus mutans Adherence to Titanium-Based Implant/Component Surfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Involvement of L-glutamate and ATP in the neurotransmission of the sympathoexcitatory component of the chemoreflex in the commissural nucleus tractus solitarii of awake rats and in the working heart-brainstem preparation

Peripheral chemoreflex activation with potassium cyanide (KCN) in awake rats or in the working heart-brainstem preparation (WHBP) produces: (a) a sympathoexcitatory/pressor response; (b) bradycardia; and (c) an increase in the frequency of breathing. Our main aim was to evaluate neurotransmitters involved in mediating the sympathoexcitatory component of the chemoreflex within the nucleus tractus solitarii (NTS). In previous studies in conscious rats, the reflex bradycardia, but not the pressor response, was reduced by antagonism of either ionotropic glutamate or purinergic P2 receptors within the NTS. In the present study we evaluated a possible dual role of both P2 and NMDA receptors in the NTS for processing the sympathoexcitatory component (pressor response) of the chemoreflex in awake rats as well as in the WHBP. Simultaneous blockade of ionotropic glutamate receptors and P2 receptors by sequential microinjections of kynurenic acid (KYN, 2 nmol (50 nl)(-1)) and pyridoxalphosphate-6-azophenyl-2',4'-disulphonate (PPADS, 0.25 nmol (50 nl)(-1)) into the commissural NTS in awake rats produced a significant reduction in both the pressor (+38 +/- 3 versus +8 +/- 3 mmHg) and bradycardic responses (-172 +/- 18 versus -16 +/- 13 beats min(-1); n = 13), but no significant changes in the tachypnoea measured using plethysmography (270 +/- 30 versus 240 +/- 21 cycles min(-1), n = 7) following chemoreflex activation in awake rats. Control microinjections of saline produced no significant changes in these reflex responses. In WHBP, microinjection of KYN (2 nmol (20 nl)(-1)) and PPADS (1.6 nmol (20 nl)(-1)) into the commissural NTS attenuated significantly both the increase in thoracic sympathetic activity (+52 +/- 2% versus +17 +/- 1%) and the bradycardic response (-151 +/- 17 versus -21 +/- 3 beats min(-1)) but produced no significant changes in the increase of the frequency of phrenic nerve discharge (+0.24 +/- 0.02+0.20 +/- 0.02 Hz). The data indicate that combined microinjections of PPADS and KYN into the commissural NTS in both awake rats and the WHBP are required to produce a significant reduction in the sympathoexcitatory response (pressor response) to peripheral chemoreflex activation. We conclude that glutamatergic and purinergic mechanisms are part of the complex neurotransmission system of the sympathoexcitatory component of the chemoreflex at the level of the commissural NTS.

Variance dispersion graphs for comparing blocked response surface designs

In this paper, we extend the use of the variance dispersion graph (VDG) to experiments in which the response surface (RS) design must be blocked. Through several examples we evaluate the prediction performances of RS designs in non-orthogonal block designs compared with the equivalent unblocked designs and orthogonally blocked designs. These examples illustrate that good prediction performance of designs in small blocks can be expected in practice. Most importantly, we show that the allocation of the treatment set to blocks can seriously affect the prediction properties of designs; thus, much care is needed in performing this allocation.