Fatigue performance of joints executed in pure titanium structures with several diameters

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Stirring, charging, and picking: hunting tactics of potamotrygonid rays in the upper Paraná River

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Species composition and spatial distribution of a stream fish assemblage in the east coast of Brazil: comparison of two field study methodologies

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diet of the ichthyofauna associated with marginal vegetation of a mangrove forest in southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aquatic macrophyte distribution in relation to water and sediment conditions in the Itaipu Reservoir, Brazil

Aquatic macrophyte community distribution along the eastern shoreline of the Itaipu Reservoir (one of the South America's largest impoundments) is described in relation to limnological and sedimentological factors. The central body of the reservoir is mesotrophic, while the arms (flooded influent river valleys) along the eastern shore may be oligo-mesotrophic to eutrophic, depending on time of year and sub-catchment characteristics. Macrophyte community composition and species cover were surveyed at 30 sites in four arms, in relation to sediment total P and organic matter; underwater light regime; and water total P and Kjeldahl N concentration, alkalinity, conductivity, depth and pH. Seventeen euhydrophyte and six emergent macrophyte species were recorded. Large stands of Egeria najas dominated the euhydrophyte vegetation, together with free-floating weed species (Pistia stratiotes Linn., Salvinia auriculata Aublet and Eichhornia crassipes (Mart.) Solms.). Canonical Correspondence Analysis of the data showed that two sets of variables were important predictors of aquatic macrophyte community structure. Floating macrophyte assemblage was closely related to concentration of nutrients in both water and sediment, while light penetration was the strongest predictor of submerged species occurrence. Although a large number of potential nuisance species were present, dense growths were restricted to shallower areas of the Itaipu Reservoir, causing localised problems. The possibility of increasing interference by these plants with fisheries, recreational use, transport and hydroelectricity generation suggests a need for continued monitoring of weed distribution and abundance, and investigation of appropriate management measures.

Juveniles of the piscivorous dourado Salminus brasiliensis mimic the piraputanga Brycon hilarii as an alternative predation tactic

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Identification of key microhabitats for fish assemblages in tropical Brazilian savanna streams

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mutilating predation in the Cheirodontinae Odontostilbe pequira (Characiformes: Characidae)

We observed individuals of Odontostilbe pequira, a small characid, approaching and biting individuals of larger-bodied fishes of other species. This observation was made in two clear water headwater streams of the Cuiaba basin, Paraguay River system, located in Nobres, Mato Grosso State, Brazil, which led us to investigate the behavioral interactions of these fish. We characterized behavioral interactions between species by direct underwater observations using snorkelling and video recordings. Additionally, we proceeded diet analyses of O. pequira, obtaining intestinal coefficient and the index of alimentary importance. During underwater observations we checked the relative frequency of attacks by O. pequira on larger fish species. Odontostilbe pequira attacked individually or in large groups, and the anostomid Leporinus friderici was the preferred target prey species, while Prochilodus lineatus was apparently avoided. Our study sustains that O. pequira is omnivorous, with a diet that varies seasonally. It feeds mainly on plants, but also on animal prey, including the scales of small fishes, and, possibly, the mucus and epidermis of larger fish species. We suggest the term "mutilating predation" to describe the latter relationship.

Strain Gauge Analysis of the Effect of Porcelain Firing Simulation on the Prosthetic Misfit of Implant-Supported Frameworks

Objectives: This study investigated the effect of porcelain firing on the misfit of implant-supported frameworks and analyzed the influence of preheat treatment on the dimensional alterations.Materials and Methods: Four external-hex cylindrical implants were placed in polyurethane block. Ten frameworks of screw-retained implant-supported prostheses were cast in Pd-Ag using 2 procedures: (1) control group (CG, n = 5): cast in segments and laser welded; and test group (TG, n = 5): cast in segments, preheated, and laser welded. All samples were subjected to firing to simulate porcelain veneering firing. Strain gauges were bonded around the implants, and microstrain values (mu epsilon = 10(-6)epsilon) were recorded after welding (M1), oxidation cycle (M2), and glaze firing (M3). Data were statistically analyzed (2-way analysis of variance, Bonferroni, alpha = 0.05).Results: The microstrain value in the CG at M3 (475.2 mu epsilon) was significantly different from the values observed at M1 (355.6 mu epsilon) and M2 (413.9 mu epsilon). The values at M2 and M3 in the CG were not statistically different. Microstrain values recorded at different moments (M1: 361.6 mu epsilon/M2: 335.3 mu epsilon/M3: 307.2 mu epsilon) did not show significant difference.Conclusions: The framework misfit deteriorates during firing cycles of porcelain veneering. Metal distortion after porcelain veneering could be controlled by preheat treatment. (Implant Dent 2012;21:225-229)

Microestrutura e resistência à corrosão do Ti c.p. soldado a laser utilizando em prótese sobre implantes

Foram realizados estudos para avaliar a microestrutura, a dureza e a resistência à corrosão do titânio comercialmente puro-Ti c.p. soldado por laser e utilizado na confecção de prótese sobre implantes. Verificou-se que na soldagem a laser a microestrutura apresentou três regiões distintas: o cordão de solda, a zona afetada pelo calor - ZAC e o metal base. O Ti c.p. possui microestrutura granular, a microestrutura do cordão de solda é mais refinada e de maior dureza do que o metal base. A ZAC obtida por este processo de soldagem foi relativamente pequena quando comparada com o processo de soldagem por brasagem. Os ensaios eletroquímicos mostraram que a região da solda apresentou menor resistência à corrosão em meio de NaCl 0,15 molL-1 à temperatura ambiente.

Estudo microestrutural e resistência à corrosão de uma liga de Au soldada a laser, empregada em prótese sobre implantes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Investigação da Interface Metal-Porcelana da Liga Ni-Cr-Mo Soldada a LASER

The interface formed between the metal and the porcelain of a LASER welded Ni-Cr-Mo alloy was studied. The characterization was carried out through optical microscopy, scanning electron microscopy, X-ray dispersive spectroscopy-EDS and mechanical testing by three-point flexion test-TPE in the region LASER welded with and without the porcelain. The porcelain adhesion with the alloy alone is possible after the oxidation of the metallic surface and subsequent application of an adhesive called opaco. The applied porcelain, on the base metal and fusion zone presented some distinct behaviors. After the TPF test the base metal presented fractures while that in the fusion zone was completely gone. One noticed that the region submitted to the LASER welding showed less porcelain adhesion than the region of the base metal due to the microestructural refinement of the fusion zone. These results can be evidenced by the EDS of the studied regions. The TPF had demonstrated that the Ni-Cr-Mo alloy submitted to the LASER welding, undergone significant alterations in its mechanical properties after the application of the porcelain.

Alimentação dos peixes em um riacho do Parque Estadual Morro do Diabo, bacia do Alto Rio Paraná, sudeste do Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fish assemblage structure in a first order stream, southeastern Brazil: longitudinal distribution, seasonality, and microhabitat diversity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da enxertia hipocotiledonar do maracujazeiro-amarelo sobre dois porta-enxertos, através de microscopia eletrônica de varredura

O objetivo deste trabalho foi verificar quanto tempo após a realização da enxertia hipocotiledonar ocorre a soldadura ou adesão entre enxerto e porta-enxerto, e também a formação da ponte de calo, verificada pelo total preenchimento da fenda por tecido meristemático secundário (calo). Foram produzidas 56 mudas de maracujazeiro-amarelo (Passiflora edulis Sims f. flavicarpa Deg.) pela enxertia hipocotiledonar em fenda cheia no topo sobre dois porta-enxertos (P. edulis Sims f. flavicarpa Deg. e P. alata Dryander). Aos 0, 3, 6, 9, 12, 15 e 18 dias após a enxertia, coletou-se a região da enxertia de quatro mudas de cada combinação. O material coletado foi fixado em solução de glutaraldeído a 3%, pós-fixado em tetróxido de ósmio a 2%, desidratado em uma série de álcool etílico (30, 40, 50, 60, 70, 80, 90, 100%), levado ao secador de ponto crítico (CO2), montado, metalizado com ouro - paládio (35 nm) e, por fim, observados e eletromicrografados em microscópio eletrônico de varredura JEOL JSM 5410 (operado em 15 kV). Verificou-se que, aos seis dias após a enxertia, a soldadura para o porta-enxerto Passiflora alata já havia ocorrido, o que só foi constatado para Passiflora edulis f. flavicarpa aos nove dias. Também, aos nove dias, observou-se para ambos os porta-enxertos a completa formação da ponte de calo, indicando que, a partir daí, pode-se iniciar o processo de aclimatação da muda, para levá-la a um ambiente de menor umidade.