992 resultados para third language
Resumo:
A connected digit speech recognition is important in many applications such as automated banking system, catalogue-dialing, automatic data entry, automated banking system, etc. This paper presents an optimum speaker-independent connected digit recognizer forMalayalam language. The system employs Perceptual Linear Predictive (PLP) cepstral coefficient for speech parameterization and continuous density Hidden Markov Model (HMM) in the recognition process. Viterbi algorithm is used for decoding. The training data base has the utterance of 21 speakers from the age group of 20 to 40 years and the sound is recorded in the normal office environment where each speaker is asked to read 20 set of continuous digits. The system obtained an accuracy of 99.5 % with the unseen data.
Resumo:
The span of writer identification extends to broad domes like digital rights administration, forensic expert decisionmaking systems, and document analysis systems and so on. As the success rate of a writer identification scheme is highly dependent on the features extracted from the documents, the phase of feature extraction and therefore selection is highly significant for writer identification schemes. In this paper, the writer identification in Malayalam language is sought for by utilizing feature extraction technique such as Scale Invariant Features Transform (SIFT).The schemes are tested on a test bed of 280 writers and performance evaluated
Resumo:
This thesis comprises five chapters including the introductory chapter. This includes a brief introduction and basic definitions of fuzzy set theory and its applications, semigroup action on sets, finite semigroup theory, its application in automata theory along with references which are used in this thesis. In the second chapter we defined an S-fuzzy subset of X with the extension of the notion of semigroup action of S on X to semigroup action of S on to a fuzzy subset of X using Zadeh's maximal extension principal and proved some results based on this. We also defined an S-fuzzy morphism between two S-fuzzy subsets of X and they together form a category S FSETX. Some general properties and special objects in this category are studied and finally proved that S SET and S FSET are categorically equivalent. Further we tried to generalize this concept to the action of a fuzzy semigroup on fuzzy subsets. As an application, using the above idea, we convert a _nite state automaton to a finite fuzzy state automaton. A classical automata determine whether a word is accepted by the automaton where as a _nite fuzzy state automaton determine the degree of acceptance of the word by the automaton. 1.5. Summary of the Thesis 17 In the third chapter we de_ne regular and inverse fuzzy automata, its construction, and prove that the corresponding transition monoids are regular and inverse monoids respectively. The languages accepted by an inverse fuzzy automata is an inverse fuzzy language and we give a characterization of an inverse fuzzy language. We study some of its algebraic properties and prove that the collection IFL on an alphabet does not form a variety since it is not closed under inverse homomorphic images. We also prove some results based on the fact that a semigroup is inverse if and only if idempotents commute and every L-class or R-class contains a unique idempotent. Fourth chapter includes a study of the structure of the automorphism group of a deterministic faithful inverse fuzzy automaton and prove that it is equal to a subgroup of the inverse monoid of all one-one partial fuzzy transformations on the state set. In the fifth chapter we define min-weighted and max-weighted power automata study some of its algebraic properties and prove that a fuzzy automaton and the fuzzy power automata associated with it have the same transition monoids. The thesis ends with a conclusion of the work done and the scope of further study.
Resumo:
Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.
Resumo:
A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.
Resumo:
Das Forschungsfeld der vorliegenden Arbeit sind die Deutsch als Zweitsprache-Kurse, die im Zeitraum der Untersuchung (2002) noch vom Sprachverband Deutsch (vormals: für ausländische Arbeitnehmer) unterstützt wurden. Da sich mit diesem wichtigen und breiten Anwendungsgebiet der Fremdsprachendidaktik bisher nur wenige Studien beschäftigt haben, ist als Forschungsansatz eine explorativ-qualitative Herangehensweise gewählt worden. Die Kurse für erwachsene Einwanderer zeichnen sich durch eine große Heterogenität der Teilnehmenden aus, dementsprechend ist die zentrale Fragestellung der Studie, in der das professionelle Handlungswissen von Lehrenden erforscht wird, die Frage der Binnendifferenzierung. Ausgehend von bereits seit den siebziger Jahren des 20. Jahrhunderts vorliegenden allgemeindidaktischen Entwürfen zur Arbeit mit heterogenen Lerngruppen, in denen das Prinzip der Binnendifferenzierung entwickelt wird, werden im ersten Teil der Arbeit didaktische Möglichkeiten der Binnendifferenzierung im Deutsch als Zweitsprache-Unterricht entworfen. Ausgehend von diesem Vorverständnis ist dann die Befragung der Lehrenden durchgeführt worden, die im zweiten Teil der Arbeit dargestellt, ausgewertet und diskutiert wird. Dabei geht es nicht um eine Evaluation der Praxis anhand vorgefasster Kategorien, sondern im Gegenteil um eine explorative Erforschung des Problembereiches der Arbeit mit heterogenen Lerngruppen im Deutsch als Zweitsprache Unterricht. Anhand der am Material entwickelten Kategorien werden zentrale didaktische Gesichtspunkte herausgearbeitet, die charakteristisch für das Forschungsfeld Deutsch als Zweitsprache mit erwachsenen Einwanderern sind. Diese Kategorien sind nicht deckungsgleich mit denen, die durch die hermeneutisch orientierte Vorgehensweise im ersten Teil der Arbeit entwickelt werden konnten. Anhand dieser Diskrepanz wird das Theorie-Praxis-Verhältnis der didaktischen Forschung und Lehre aufgeschlüsselt und kritisch betrachtet. Ausblick der Arbeit ist der Verweis auf die Professionalisierungsdebatte und die Notwendigkeit einer praxisbezogenen Forschung, welche die Bedürfnisse von Lehrenden direkt einbezieht und im Sinne einer Aktionsforschung gleichzeitig zur Weiterbildung der Lehrenden beiträgt. Nur auf diesem Weg kann die Unterrichtspraxis unmittelbar weiter entwickelt werden. Aus der vorliegenden Studie ergeben sich viel versprechende Anknüpfungspunkte für kooperative Aktionsforschungsprojekte, die von den Lehrenden in den Interviews angeregt werden.
Resumo:
The process of developing software that takes advantage of multiple processors is commonly referred to as parallel programming. For various reasons, this process is much harder than the sequential case. For decades, parallel programming has been a problem for a small niche only: engineers working on parallelizing mostly numerical applications in High Performance Computing. This has changed with the advent of multi-core processors in mainstream computer architectures. Parallel programming in our days becomes a problem for a much larger group of developers. The main objective of this thesis was to find ways to make parallel programming easier for them. Different aims were identified in order to reach the objective: research the state of the art of parallel programming today, improve the education of software developers about the topic, and provide programmers with powerful abstractions to make their work easier. To reach these aims, several key steps were taken. To start with, a survey was conducted among parallel programmers to find out about the state of the art. More than 250 people participated, yielding results about the parallel programming systems and languages in use, as well as about common problems with these systems. Furthermore, a study was conducted in university classes on parallel programming. It resulted in a list of frequently made mistakes that were analyzed and used to create a programmers' checklist to avoid them in the future. For programmers' education, an online resource was setup to collect experiences and knowledge in the field of parallel programming - called the Parawiki. Another key step in this direction was the creation of the Thinking Parallel weblog, where more than 50.000 readers to date have read essays on the topic. For the third aim (powerful abstractions), it was decided to concentrate on one parallel programming system: OpenMP. Its ease of use and high level of abstraction were the most important reasons for this decision. Two different research directions were pursued. The first one resulted in a parallel library called AthenaMP. It contains so-called generic components, derived from design patterns for parallel programming. These include functionality to enhance the locks provided by OpenMP, to perform operations on large amounts of data (data-parallel programming), and to enable the implementation of irregular algorithms using task pools. AthenaMP itself serves a triple role: the components are well-documented and can be used directly in programs, it enables developers to study the source code and learn from it, and it is possible for compiler writers to use it as a testing ground for their OpenMP compilers. The second research direction was targeted at changing the OpenMP specification to make the system more powerful. The main contributions here were a proposal to enable thread-cancellation and a proposal to avoid busy waiting. Both were implemented in a research compiler, shown to be useful in example applications, and proposed to the OpenMP Language Committee.
Resumo:
The migration of healthcare professionals from developing to developed countries, often aided by recruitment agencies, is a phenomenon of great international concern, as reflected in the construction of numerous ethical recruitment codes, which aim to govern the process. In an attempt to provide an overview of the situation, dealing specifically with the migration of nurses, as well as a critical and gender sensitive analysis of the codes, this paper follows three broad steps: first, it reviews the literature dedicated to the migration of nurses from developing to developed countries, adding a gendered account to more conventional push-pull explanations; second, it delineates the positive and negative effects that nurse migration has at the stakeholders levels of the individual, institutional, national and international level, paying particular attention to the role of gender; and third, it reviews and compares numerous codes for the ethical recruitment of nurses, highlighting the gendered rationale and consequences they may have. In showing that nurse migration is a gendered phenomenon, the paper questions whether the codes, written in gender neutral language, will come to bear unintended consequences that will effectively work to uphold gender stereotypes and inequalities.
Resumo:
Cooperative behaviour of agents within highly dynamic and nondeterministic domains is an active field of research. In particular establishing highly responsive teamwork, where agents are able to react on dynamic changes in the environment while facing unreliable communication and sensory noise, is an open problem. Moreover, modelling such responsive, cooperative behaviour is difficult. In this work, we specify a novel model for cooperative behaviour geared towards highly dynamic domains. In our approach, agents estimate each other’s decision and correct these estimations once they receive contradictory information. We aim at a comprehensive approach for agent teamwork featuring intuitive modelling capabilities for multi-agent activities, abstractions over activities and agents, and a clear operational semantic for the new model. This work encompasses a complete specification of the new language, ALICA.
Resumo:
In der psycholinguistischen Forschung ist die Annahme weitverbreitet, dass die Bewertung von Informationen hinsichtlich ihres Wahrheitsgehaltes oder ihrer Plausibilität (epistemische Validierung; Richter, Schroeder & Wöhrmann, 2009) ein strategischer, optionaler und dem Verstehen nachgeschalteter Prozess ist (z.B. Gilbert, 1991; Gilbert, Krull & Malone, 1990; Gilbert, Tafarodi & Malone, 1993; Herbert & Kübler, 2011). Eine zunehmende Anzahl an Studien stellt dieses Zwei-Stufen-Modell von Verstehen und Validieren jedoch direkt oder indirekt in Frage. Insbesondere Befunde zu Stroop-artigen Stimulus-Antwort-Kompatibilitätseffekten, die auftreten, wenn positive und negative Antworten orthogonal zum aufgaben-irrelevanten Wahrheitsgehalt von Sätzen abgegeben werden müssen (z.B. eine positive Antwort nach dem Lesen eines falschen Satzes oder eine negative Antwort nach dem Lesen eines wahren Satzes; epistemischer Stroop-Effekt, Richter et al., 2009), sprechen dafür, dass Leser/innen schon beim Verstehen eine nicht-strategische Überprüfung der Validität von Informationen vornehmen. Ausgehend von diesen Befunden war das Ziel dieser Dissertation eine weiterführende Überprüfung der Annahme, dass Verstehen einen nicht-strategischen, routinisierten, wissensbasierten Validierungsprozesses (epistemisches Monitoring; Richter et al., 2009) beinhaltet. Zu diesem Zweck wurden drei empirische Studien mit unterschiedlichen Schwerpunkten durchgeführt. Studie 1 diente der Untersuchung der Fragestellung, ob sich Belege für epistemisches Monitoring auch bei Informationen finden lassen, die nicht eindeutig wahr oder falsch, sondern lediglich mehr oder weniger plausibel sind. Mithilfe des epistemischen Stroop-Paradigmas von Richter et al. (2009) konnte ein Kompatibilitätseffekt von aufgaben-irrelevanter Plausibilität auf die Latenzen positiver und negativer Antworten in zwei unterschiedlichen experimentellen Aufgaben nachgewiesen werden, welcher dafür spricht, dass epistemisches Monitoring auch graduelle Unterschiede in der Übereinstimmung von Informationen mit dem Weltwissen berücksichtigt. Darüber hinaus belegen die Ergebnisse, dass der epistemische Stroop-Effekt tatsächlich auf Plausibilität und nicht etwa auf der unterschiedlichen Vorhersagbarkeit von plausiblen und unplausiblen Informationen beruht. Das Ziel von Studie 2 war die Prüfung der Hypothese, dass epistemisches Monitoring keinen evaluativen Mindset erfordert. Im Gegensatz zu den Befunden anderer Autoren (Wiswede, Koranyi, Müller, Langner, & Rothermund, 2013) zeigte sich in dieser Studie ein Kompatibilitätseffekt des aufgaben-irrelevanten Wahrheitsgehaltes auf die Antwortlatenzen in einer vollständig nicht-evaluativen Aufgabe. Die Ergebnisse legen nahe, dass epistemisches Monitoring nicht von einem evaluativen Mindset, möglicherweise aber von der Tiefe der Verarbeitung abhängig ist. Studie 3 beleuchtete das Verhältnis von Verstehen und Validieren anhand einer Untersuchung der Online-Effekte von Plausibilität und Vorhersagbarkeit auf Augenbewegungen beim Lesen kurzer Texte. Zusätzlich wurde die potentielle Modulierung dieser Effeke durch epistemische Marker, die die Sicherheit von Informationen anzeigen (z.B. sicherlich oder vielleicht), untersucht. Entsprechend der Annahme eines schnellen und nicht-strategischen epistemischen Monitoring-Prozesses zeigten sich interaktive Effekte von Plausibilität und dem Vorhandensein epistemischer Marker auf Indikatoren früher Verstehensprozesse. Dies spricht dafür, dass die kommunizierte Sicherheit von Informationen durch den Monitoring-Prozess berücksichtigt wird. Insgesamt sprechen die Befunde gegen eine Konzeptualisierung von Verstehen und Validieren als nicht-überlappenden Stufen der Informationsverarbeitung. Vielmehr scheint eine Bewertung des Wahrheitsgehalts oder der Plausibilität basierend auf dem Weltwissen – zumindest in gewissem Ausmaß – eine obligatorische und nicht-strategische Komponente des Sprachverstehens zu sein. Die Bedeutung der Befunde für aktuelle Modelle des Sprachverstehens und Empfehlungen für die weiterführende Forschung zum Vehältnis von Verstehen und Validieren werden aufgezeigt.
Resumo:
Computational models are arising is which programs are constructed by specifying large networks of very simple computational devices. Although such models can potentially make use of a massive amount of concurrency, their usefulness as a programming model for the design of complex systems will ultimately be decided by the ease in which such networks can be programmed (constructed). This thesis outlines a language for specifying computational networks. The language (AFL-1) consists of a set of primitives, ad a mechanism to group these elements into higher level structures. An implementation of this language runs on the Thinking Machines Corporation, Connection machine. Two significant examples were programmed in the language, an expert system (CIS), and a planning system (AFPLAN). These systems are explained and analyzed in terms of how they compare with similar systems written in conventional languages.