O Paternalismo nas organizações brasileiras: reflexões à luz da análise cultural de empresas do pólo têxtil de americana

Esta tese procura discutir a atualidade do paternalismo enquanto traço cultural das organizações brasileiras. Resgatando as raízes culturais brasileiras e apoiando-se em trabalhos de fundamentação antropológica, sociológica e psicanalítica, estabelece uma hipótese central de que o paternalismo possa ser encontrado hoje, no Brasil, tanto em empresas pequenas, onde predomina o controle de tipo paterno, quanto em empresas maiores e mais complexas, com tendência ao desenvolvimento de um sistema de controle de tipo materno, onde o paternalismo daria origem a uma versão abrasileirada deste. Pesquisa de campo de cunho etnográfico, realizada em três empresas de portes distintos do Pólo Têxtil de Americana-SP, mostrou indícios favoráveis à hipótese central, apresentando, todavia, importantes peculiaridades que, ao passo que permitem refiná-la, indicam trilhas para novos estudos. Na empresa de menor porte e complexidade, o paternalismo mostrou-se da maneira mais conhecida, nas práticas ora carinhosas, ora severas dos diretores da empresa. Nas empresas mais complexas, pudemos notar a expressão da ação dos pais que regulam o gozo dos filhos. A face protetora e a face violenta se revelam na medida em que se dá ou se restringe acesso ao amor da mãe. Nos três casos estudados, o paternalismo aparece com sua face afetiva predominado significativamente em relação à face violenta, o que parece ser elemento associado ao sucesso experimentado por tais empresas.

Sistemas de controle de vendas no setor têxtil: um estudo exploratório

Esta dissertação estuda os sistemas de controle de vendas praticados pela indústria têxtil brasileira diante das mudanças ambientais ocorridas nas últimas duas décadas. O pressuposto básico para a utilização de sistemas de controle para a equipe de vendas é que através deles é possível dirigir e influenciar as atitudes e os comportamentos dos empregados para conseguir atingir seus objetivos, havendo uma estreita relação entre a forma como a gerência comercial monitora, dirige, avalia e recompensa as atividades dos seus vendedores e a efetividade da área comercial, sendo diferenciais decisivos para atender a pressão por competitividade e as exigências do mercado quanto ao posicionamento da equipe comercial frente ao novo cenário de negócios. Da revisão teórica foram levantados os oito principais modelos de sistemas de controle e aspectos importantes que devem ser considerados para a composição do sistema de cada empresa. A pesquisa foi conduzida entre os responsáveis por equipes de vendas no segmento têxtil nos elos onde vendas industriais são realizadas. Empregaram-se técnicas empíricas para o levantamento das freqüências de incidência dos aspectos estudados e foi possível constatar que os elos de fibras e filamentos, fiação, tecelagem, malharia e beneficiamento do segmento têxtil possuem sistemas de controle pertinentes com as características de venda industrial. Os controles formais estão ligados a resultados e os controles informais estão relacionados com o acompanhamento das atividades e capacidades do vendedor. Adicionalmente buscou-se captar a percepção dos responsáveis por equipes comerciais sobre sua efetividade nos aspectos de volume de vendas, lucratividade, participação de mercado e também satisfação do cliente.

A foice, o martelo e outras ferramentas de ação política: os trabalhadores rurais e têxteis de Magé/RJ (1956-1973)

A presente tese pretende analisar a ação política dos trabalhadores rurais e têxteis do municí-pio de Magé, Estado do Rio de Janeiro, entre os anos de 1956 e 1973, com destaque para as atuações dessas duas categorias em parceria, bem como as suas formas de organização e lutas. Ao considerarmos este município como um cenário privilegiado para se investigar as conexões entre o rural e urbano – tendo em vista que a cidade foi uma pródiga produtora de alimentos e tornou-se um polo industrial têxtil – nosso intuito será mapear a participação dos diversos partidos políticos, lideranças, grupos e instituições que dialogavam com esses trabalhadores para além do mito da “foice o e martelo”. Deste modo, buscamos contribuir com os estudos sobre história do trabalho, enfatizando a articulação entre as lutas coletivas e as ferramentas de ação política utilizadas por esses tecelões e lavradores, analisados de forma conjunta nesta pesquisa.

Gestão da cadeia de suprimento e vantagem competitiva: uma análise em setores industriais a partir da visão relacional

This work has as its main purpose to investigate the contribution of supply chain management in order to obtain competitive advantage by companies from the textile industry and from Ceará footwear industry, focusing its analysis mainly in the interorganizational relations (dyadic). For this, the theoretical referential contemplates different explanatory streams of the competitive advantage, detaching the relational perception of the resources theory, as well as, the main presuppositions of the supply chain management which culminates with the development of an analysis sample that runs the empirical study; the one which considers an expanded purpose of the supply chain which includes the government and the abetment institutions as institutional environment representatives. Besides supply chain management consideration as a competitive advantage source, the work also tried to identify other possible competitive advantage sources for the companies of the investigated sectors. It represents a study of multiple interpretive cases, having four cases as a total; meaning two cases in each one of the sectors, which used as a primary data collecting instrument a semi-structured interview schedule. Different methods were used for the data analysis, the content analysis and the constant comparison methods, the analytical procedure originated from the grounded theory research strategy, which were applied the Atlas/ti software recourse. Considering the theoretical referential and the used analysis sample, four basic categories of the work were defined, including its respective proprieties and dimensions: (1) characteristics concerning to the relationship with the supplier; (2) the company relations with the government; (3) the company relations with the abetment institutions and; (4) obtaining sources of competitive advantage. In general, the applied research in the footwear sector revealed that in the relationships of the researched companies related to its suppliers, there is a predominance of the partnership system and the main presuppositions of the supply chain management are applied which contributes for the acquisition of the relational competitive advantage; while in the textile sector, only some of these presuppositions are applied, with little contribution for the relational competitive advantage. The main resource which was accessed by the companies in both sectors through its relationships with the government and the abetment institutions are the tax incentives which, for the footwear companies, contribute for the acquisition of the temporary competitive advantage in relation to the contestants who do not own productive installations in the Northeast region, it also conducts to a competitive parity situation in relation to the contestants who own productive installations in the Northeast region and to the external market contestants; while for the companies of the textile sector, the tax incentives run the companies to a competitive parity situation in relation to its contestants. Furthermore, the investigated companies from the two sectors possess acquisition sources of the competitive advantage which collimate with different explanatory streams (industrial analysis, resources theory, Austrian school and the dynamic capabilities theory), although there is a predominance of the product innovation as a competitive advantage source in both sectors, due to the bond of these with the fashion tendencies

Contribuições da inserção musical para a qualidade de vida no trabalho em ambiente laboral fabril

The present thesis aimed at understanding how the insertion of music in the work environment contributes to achieving Quality of Work Life. - QWL, under the perspective of biopsychosocial and organizational well-being. As to music insertion we considered the theoretical-empirical perception about how music is inserted at work and its functions on such place. The context where the study was taken was the manufacturing area of a major textile company, located in Natal, state of Rio Grande do Norte, Brazil, in which music is used during labor activities. The only study case was the research strategy adopted, with exploratory and descriptive purposes. The primary data were collected through the focus group technique, applied to the collaborator in the manufacturing sector. The semi-structured interview was done as a complementary tool, directed to the supervisor in that sector. Respecting the theoretical saturation criterion, we formed four focus groups, each one composed of eight members randomly selected, among the seventy-six collaborators in the sector. The data were analyzed qualitatively, through the content analysis technique, more specifically the category analysis. We identified twenty-eight QWL attributes. Six of them were found present in the four focus groups and in the interview. Among these ones, the attribute of Interpersonal Relationship at Work, contemplating the Psychological and Organizational dimensions, was the only one anticipated in four out of fifteen theoretical models here listed. The attribute Music at Work Environment could be inserted in the four QWL dimensions, highlighting the power and relevance of this attribute for the research participants. The way music has been inserted in the labor environment contributes to promoting well-being at work, which goes against theoretical conceptions, especially when it comes to musical genre. We identified nine functions of music at work, among which, Improving Work Conditions, Improving Interpersonal Relationship at Work and Favoring Motivation for Work had to be emphasized for being associated to three QWL attributes. In the total, we highlighted seven associations. The most affected QWL dimension through the insertion of music at work was the Psychological one, followed by the Organizational one. We conclude that music insertion provides biological, social and, above all, psychological and organizational well-being to the contributors, thus contributing to obtaining QWL at the labor environment researched. However, we should consider the context and proceed to periodical plans and adjustments in the way of music insertion so as to avoid health and well-being problems to those people at work

Práticas da ti verde que contribuem para o desenvolvimento sustentável: um estudo de caso em indústrias do RN

This dissertation aims to describe the practices of Information Technology Green contributing to sustainable development, in computers and textile industries in the state of Rio Grande do Norte. The goal is to understand the importance and contribution of IT Green for sustainable development. The research methodology used involved a survey of the theoretical approach prepared, involving two case studies in industries of Rio Grande do Norte. The analysis was supported by an analysis of content, which allowed the understanding of the phenomenon of the Information Technology Green sustainable development in the case studies. In conclusion, is that the Green Information Technology contributes to sustainable development, even so through incipient aspects that highlight the competitive business with a focus on cost reduction, and efforts in sustainable practices

Avaliação ecotoxicológica de efluentes industriais utilizando Danio rerio Hamilton-Buchanan, 1822 (TELEOSTEI, CYPRINIDAE)

The industrial effluents are one of the main sources of water pollution. For an appropriate characterization and control of their discharges, the most efficient strategy is the integrated use of chemical, physical and ecotoxicological analyses. The aims of this study were to asses the efficiency of the treatment plant of a textile industry performing acute toxicity tests and physical-chemical analyses of the effluents before and after the treatment, besides evaluate the toxicity of the effluents of the Treatment System of Liquids Effluents (Sistema de Tratamento de Efluentes Líquidos - SITEL) of Distrito Industrial de Natal (DIN) and some of their physical-chemical variables. The species used in the ecotoxicological tests was the fish Danio rerio. The results showed that the treatment plant reduced significantly (around 50%) the toxicity of the raw textile effluent in only three of the seven tests but, in general, it promoted the reduction of the physical-chemical parameters analyzed. The toxicity and the physical-chemical factors of the effluents of SITEL of DIN varied among the tests and show the importance of monitoring their discharges in the Potengi river, one of the most important rivers of the Rio Grande do Norte state

Diagnóstico ecotoxicológico dos efluentes lançados no complexo estuarino do Jundiaí/Potengi, Natal/RN

Untreated effluents that reach surface water affect the aquatic life and humans. This study aimed to evaluate the wastewater s toxicity (municipal, industrial and shrimp pond effluents) released in the Estuarine Complex of Jundiaí- Potengi, Natal/RN, through chronic quantitative e qualitative toxicity tests using the test organism Mysidopsis Juniae, CRUSTACEA, MYSIDACEA (Silva, 1979). For this, a new methodology for viewing chronic effects on organisms of M. juniae was used (only renewal), based on another existing methodology to another testorganism very similar to M. Juniae, the M. Bahia (daily renewal).Toxicity tests 7 days duration were used for detecting effects on the survival and fecundity in M. juniae. Lethal Concentration 50% (LC50%) was determined by the Trimmed Spearman-Karber; Inhibition Concentration 50% (IC50%) in fecundity was determined by Linear Interpolation. ANOVA (One Way) tests (p = 0.05) were used to determinate the No Observed Effect Concentration (NOEC) and Low Observed Effect Concentration (LOEC). Effluents flows were measured and the toxic load of the effluents was estimated. Multivariate analysis - Principal Component Analysis (PCA) and Correspondence Analysis (CA) - identified the physic-chemical parameters better explain the patterns of toxicity found in survival and fecundity of M. juniae. We verified the feasibility of applying the only renewal system in chronic tests with M. Juniae. Most efluentes proved toxic on the survival and fecundity of M. Juniae, except for some shrimp pond effluents. The most toxic effluent was ETE Lagoa Aerada (LC50, 6.24%; IC50, 4.82%), ETE Quintas (LC50, 5.85%), Giselda Trigueiro Hospital (LC50, 2.05%), CLAN (LC50, 2.14%) and COTEMINAS (LC50, IC50 and 38.51%, 6.94%). The greatest toxic load was originated from ETE inefficient high flow effluents, textile effluents and CLAN. The organic load was related to the toxic effects of wastewater and hospital effluents in survival of M. Juniae, as well as heavy metals, total residual chlorine and phenols. In industrial effluents was found relationship between toxicity and organic load, phenols, oils and greases and benzene. The effects on fertility were related, in turn, with chlorine and heavy metals. Toxicity tests using other organisms of different trophic levels, as well as analysis of sediment toxicity are recommended to confirm the patterns found with M. Juniae. However, the results indicate the necessity for implementation and improvement of sewage treatment systems affluent to the Potengi s estuary

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Influência das espécies do plasma de N2 + O2 nas propriedades físicoquímicas das superfícies do pet

This work reports the influence of the poly (ethylene terephthalate) textile and films surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The plasma surface polymeric modification has been used for many researchs, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, the treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min, using oxygen plasma alternating the treatment time 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) which was varied only the gas composition from 0 to 100% leaving the treatment time remaining constant to all treatment (10 min). The plasma treatment was characterized in-situ with Optics Emission Spectroscopy (OES), and the samples was characterized by contact angle, surface tension, Through Capillary tests, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, scanning electronic Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). The results showed that oxygen treated fabrics presented high wettability, due to the hydrophilic groups incorporation onto the surface formed through spputering of carbon atoms. For the nitrogen atmosphere, there is the a film deposition of amine groups. Treatment with small oxygen concentration in the mixture with nitrogen has a higher spputered species of the samples

Estudo da molhabilidade de tecidos 100% poliéster tratados em plasma N2/O2 em função do seu envelhecimento natural

This work reports the influence of the poly (ethylene terephthalate) textile surface modification by plasmas of O2 and mixtures (N2 + O2), on their physical and chemical properties. The treatment was carried out in a vacuum chamber. Some parameters remained constant during all treatment, such as: Voltage 470 V; Pressure 1,250 Mbar; Current: 0, 10 A and gas flow: 10 cm3/min. Other parameters, such as working gas composition and treatment time, were modified as the following: to the O2 plasma modified samples only the treatment time was changed (10, 20, 30, 40, 50 and 60 minutes). To the plasma with O2 and N2 only the chemical concentrations were changed. Through Capillary tests (vertical) an increase in textile wettability was observed as well as its influence on aging time and its consequence on wettability. The surface functional groups created after plasma treatments were investigated using X-ray Photoelectron Spectroscopy (XPS). The surface topography was examined by scanning electron microscope (SEM)

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Critical periods of weed control in naturally green colored cotton BRS Verde

Cotton with naturally colored fiber is increasing as a commercial crop due specially to its textile processing with reduced environmental impact, as dying is not necessary. The critical period of weed control and the weed community were studied in a field with the naturally green colored fiber cv. BRS Verde cultivated in Missao Velha, Brazil. Without weed control during all the cycle, a reduction of 82.9% in yield was observed. The critical period of weed control was between 31 and 74 days after emergence for a reduction of 5% in yield. The weed community was composed of 21 species, with higher relative importance and dominance of monocotyledonous species. The beginning of the critical period was found to be more influential on yield than the ending. Thus, defining the right moment to start weed control can be more important to yield than determining the moment to cease it. (C) 2011 Elsevier B.V. All rights reserved.