Regulation of the petrol industry in the UK: issues and evidence

The petrol industry has been investigated twice by the Monopolies and Mergers Commission in the last 20 years. On both occasions the MMC found that the conduct of the companies was not against the public interest. These findings were based on the perceived stable relationship between oil and petrol prices. This paper develops a model of petrol price using a co-integration approach, concluding that one must question the findings of the MMC.

Employment effects of privatisation and foreign acquisition of Chinese state-owned enterprises

This paper investigates the effects of domestic privatisation or foreign acquisition of Chinese State Owned Enterprises (SOEs) on employment growth, using firm level data for China and a combination of propensity score matching and difference-in-differences in order to identify the causal effect. Our results suggest that, controlling for output growth there is some evidence that domestic privatisation leads to contemporaneous reductions in employment growth compared to firms that did not undergo an ownership change. By contrast, there is some evidence that foreign acquisitions show higher employment growth in the post acquisition period than non-acquired SOEs.

Internal versus external R&D:a study of R&D choice with sample selection

This paper extends previous analyses of the choice between internal and external R&D to consider the costs of internal R&D. The Heckman two-stage estimator is used to estimate the determinants of internal R&D unit cost (i.e. cost per product innovation) allowing for sample selection effects. Theory indicates that R&D unit cost will be influenced by scale issues and by the technological opportunities faced by the firm. Transaction costs encountered in research activities are allowed for and, in addition, consideration is given to issues of market structure which influence the choice of R&D mode without affecting the unit cost of internal or external R&D. The model is tested on data from a sample of over 500 UK manufacturing plants which have engaged in product innovation. The key determinants of R&D mode are the scale of plant and R&D input, and market structure conditions. In terms of the R&D cost equation, scale factors are again important and have a non-linear relationship with R&D unit cost. Specificities in physical and human capital also affect unit cost, but have no clear impact on the choice of R&D mode. There is no evidence of technological opportunity affecting either R&D cost or the internal/external decision.

Chemical kinetic investigation of a commercial batch reactor process

The aim of this investigation was to study the chemical reactions occurring during the batchwise production of a butylated melamine-formaldehyde resin, in order to optimise the efficiency and economics of the batch processes. The batch process models are largely empirical in nature as the reaction mechanism is unknown. The process chemistry and the commercial manufacturing method are described. A small scale system was established in glass and the ability to produce laboratory resins with the required quality was demonstrated, simulating the full scale plant. During further experiments the chemical reactions of methylolation, condensation and butylation were studied. The important process stages were identified and studied separately. The effects of variation of certain process parameters on the chemical reactions were also studied. A published model of methylolation was modified and used to simulate the methylolation stage. A major result of this project was the development of an indirect method for studying the condensation and butylation reactions occurring during the dehydration and acid reaction stages, as direct quantitative methods were not available. A mass balance method was devised for this purpose and used to collect experimental data. The reaction scheme was verified using this data. The reactions stages were simulated using an empirical model. This has revealed new information regarding the mechanism and kinetics of the reactions. Laboratory results were shown to be comparable with plant scale results. This work has improved the understanding of the batch process, which can be used to improve product consistency. Future work has been identified and recommended to produce an optimum process and plant design to reduce the batch time.

To link or not to link: a test of the case linkage principles using serial car theft data

The purpose of the present study is to test the case linkage principles of behavioural consistency and behavioural distinctiveness using serial vehicle theft data. Data from 386 solved vehicle thefts committed by 193 offenders were analysed using Jaccard's, regression and Receiver Operating Characteristic analyses to determine whether objectively observable aspects of crime scene behaviour could be used to distinguish crimes committed by the same offender from those committed by different offenders. The findings indicate that spatial behaviour, specifically the distance between theft locations and between dump locations, is a highly consistent and distinctive aspect of vehicle theft behaviour; thus, intercrime and interdump distance represent the most useful aspects of vehicle theft for the purpose of case linkage analysis. The findings have theoretical and practical implications for understanding of criminal behaviour and for the development of decision-support tools to assist police investigation and apprehension of serial vehicle theft offenders.

On the adoption decision and the intensity of use of complementary innovations: The intra firm diffusion of management practices across UK establishments

This paper contributes to the literature on the intra-firm diffusion of innovations by investigating the factors that affect the firm’s decision to adopt and use sets of complementary innovations. We define complementary innovations those innovations whose joint use generates super additive gains, i.e. the gain from the joint adoption is higher than the sum of the gains derived from the adoption of each innovation in isolation. From a theoretical perspective, we present a simple decision model, whereby the firm decides ‘whether’ and ‘how much’ to invest in each of the innovations under investigation based upon the expected profit gain from each possible combination of adoption and use. The model shows how the extent of complementarity among the innovations can affect the firm’s profit gains and therefore the likelihood that the firm will adopt these innovations jointly, rather than individually. From an empirical perspective, we focus on four sets of management practices, namely operating (OMP), monitoring (MMP), targets (TMP) and incentives (IMP) management practices. We show that these sets of practices, although to a different extent, are complementary to each other. Then, we construct a synthetic indicator of the depth of their use. The resulting intra-firm index is built to reflect not only the number of practices adopted but also the depth of their individual use and the extent of their complementarity. The empirical testing of the decision model is carried out using the evidence from the adoption behaviour of a sample of 1,238 UK establishments present in the 2004 Workplace Employment Relations Survey (WERS). Our empirical results show that the intra-firm profitability based model is a good model in that it can explain more of the variability of joint adoption than models based upon the variability of adoption and use of individual practices. We also investigate whether a number of firm specific and market characteristics by affecting the size of the gains (which the joint adoption of innovations can generate) may drive the intensity of use of the four innovations. We find that establishment size, whether foreign owned, whether exposed to an international market and the degree of homogeneity of the final product are important determinants of the intensity of the joint adoption of the four innovations. Most importantly, our results point out that the factors that the economics of innovation literature has been showing to affect the intensity of use of a technological innovation do also affect the intensity of use of sets of innovative management practices. However, they can explain only a small part of the diversity of their joint adoption use by the firms in the sample.

A novel process for the production of castor oil by direct solvent extraction

This research was undertaken to: develop a process for the direct solvent extraction of castor oil seeds. A literature survey confirmed the desirability of establishing such a process with emphasis on the decortication, size, reduction, detoxification-deallergenization, and solvent·extraction operations. A novel process was developed for the dehulling of castor seeds which consists of pressurizing the beans and then suddenly releasing the pressure to vaccum. The degree of dehulling varied according to the pressure applied and the size of the beans. Some of the batches were difficult-to-hull, and this phenomenon was investigated using the scanning electron microscope and by thickness and compressive strength measurements. The other variables studied to lesser degrees included residence time, moisture, content, and temperature.The method was successfully extended to cocoa beans, and (with modifications) to peanuts. The possibility of continuous operation was looked into, and a mechanism was suggested to explain the method works. The work on toxins and allergens included an extensive literature survey on the properties of these substances and the methods developed for their deactivation Part of the work involved setting up an assay method for measuring their concentration in the beans and cake, but technical difficulties prevented the completion of this aspect of the project. An appraisal of the existing deactivation methods was made in the course of searching for new ones. A new method of reducing the size of oilseeds was introduced in this research; it involved freezing the beans in cardice and milling them in a coffee grinder, the method was found to be a quick, efficient, and reliable. An application of the freezing technique was successful in dehulling soybeans and de-skinning peanut kernels. The literature on the solvent extraction, of oilseeds, especially castor, was reviewed: The survey covered processes, equipment, solvents, and mechanism of leaching. three solvents were experimentally investigated: cyclohexane, ethanol, and acetone. Extraction with liquid ammonia and liquid butane was not effective under the conditions studied. Based on the results of the research a process has been suggested for the direct solvent extraction of castor seeds, the various sections of the process have analysed, and the factors affecting the economics of the process were discussed.

Fluidized bed gasification of biomass

A fluidized bed process development unit of 0.8 m internal diameter was designed on basis of results obtained from a bench scale laboratory unit. For the scaling up empirical models from the literature were used. The process development unit and peripheral equipment were constructed, assembled and commissioned, and instruments were provided for data acquisition. The fluidization characteristics of the reactor were determined and were compared to the design data. An experimental programme was then carried out and mass and energy balances were made for all the runs. The results showed that the most important independent experimental parameter was the air factor, with an optimum at 0.3. The optimum higher heating value of the gas produced was 6.5 MJ/Nm3, while the thermal efficiency was 70%. Reasonably good agreement was found between the experimental results, theoretical results from a thermodynamic model and data from the literature. It was found that the attainment of steady state was very sensitive to a continuous and constant feedstock flowrate, since the slightest variation in feed flow resulted in fluctuations of the gas quality. On the basis of the results a set of empirical relationships was developed, which constitutes an empirical model for the prediction of the performance of fluidized bed gasifiers. This empirical model was supplemented by a design procedure by which fluidized bed gasifiers can be designed and constructed. The design procedure was then extended to cover feedstock feeding and gas cleaning in a conceptual design of a fluidized bed gasification facility. The conceptual design was finally used to perform an economic evaluation of a proposed gasification facility. The economics of this plant (retrofit application) were favourable.

Exits, entrances and entrepreneurship : an exploration of economic theories of entrepreneurship through new independent entry and infant exit

The thesis began as a study of new firm formation. Preliminary research suggested that infant death rate was considered to be a closely related problem and the search was for a theory of new firm formation which would explain both. The thesis finds theories of exit and entry inadequate in this respect and focusses instead on theories of entrepreneurship, particularly those which concentrate on entrepreneurship as an agent of change. The role of information is found to be fundamental to economic change and an understanding of information generation and dissemination and the nature and direction of information flows is postulated to lead coterminously to an understanding of entrepreneurhsip and economic change. The economics of information is applied to theories of entrepreneurhsip and some testable hypotheses are derived. The testing relies on etablishing and measuring the information bases of the founders of new firms and then testing for certain hypothesised differences between the information bases of survivors and non-survivors. No theory of entrepreneurship is likely to be straightforwardly testable and many postulates have to be established to bring the theory to a testable stage. A questionnaire is used to gather information from a sample of firms taken from a new micro-data set established as part of the work of the thesis. Discriminant Analysis establishes the variables which best distinguish between survivors and non-survivors. The variables which emerge as important discriminators are consistent with the theory which the analysis is testing. While there are alternative interpretations of the important variables, collective consistency with the theory under test is established. The thesis concludes with an examination of the implications of the theory for policy towards stimulating new firm formation.

An investigation into the network structures of eThylene propylene terpolymer elastomers

A series of ethylene propylene terpolymer vulcanizates, prepared by varying termonomer type, cure system, cure time and cure temperature, are characterized by determining the number and type of cross-links present. The termonomers used represent the types currently available in commercial quantities. Characterization is carried out by measuring the C1 constant of the Mooney Rivlin Saunders equation before and after treatment with the chemical probes propane-2-thiol/piperidine and n-hexane thiol/piperidine, thus making it possible to calculate the relative proportions of mono-sulphidic, di-sulphidic and poly- sulphidic cross-links. The cure systems used included both sulphur and peroxide formulations. Specific physical properties are determined for each network and an attempt is made to correlate observed changes in these with variations in network structure. A survey of the economics of each formulation based on a calculated efficiency parameter for each cure system is included. Values of C1 are calculated from compression modulus data after the reliability of the technique when used with ethylene propylene terpolymers had been established. This is carried out by comparing values from both compression and extension stress strain measurements for natural rubber vulcanizates and by assessing the effects of sample dimensions and the degree of swelling. The technique of compression modulus is much more widely applicable than previously thought. The basic structure of an ethylene propylene terpolymer network appears to be independent of the type of cure system used ( sulphur based systems only), the proportions of constituent cross-links being nearly constant.

The manufacture and utilisation of architectural terracotta and faience.

The revival of terracotta and faience in British architecture was widespread, dramatic in its results and, for two decades, the subject of intense debate. However the materials have been frequently denigrated and more generally disregarded by both architects and historians. This study sets out to record and explain the rise and fall of interest in terracotta and faience, the extent and nature of the industry and the range of architectural usage in the Victorian, Edwardian and inter-war periods. The first two chapters record the faltering use of terracotta as an 'artificial stone', until the material gained its own identity, largely through the appreciation of Italian architecture. In the mid-Victorian period, terracotta will be seen to have become symbolic of the philosophy of the Victoria and Albert Museum and its Art School in attempting to reform both architecture and the decorative arts. The adoption of terracotta was furthered as much by industrial as aesthetic factors; three chapters examine how the exploitation of coal-measure clays, developments in the processes of manufacture, the changing motivation of industrialists and differing economics of production served to promote and then to hinder expansion and adaptation. The practical values of economy, durability and fire-resistance and the aesthetic potential, seen in terms of colour and decorative and sculptural modelling, became inter-related in the work of the architects who made extensive use of architectural ceramics. A correlation emerges between the free Gothic style, exemplified by the designs of Alfred Waterhouse and the use of red terracotta supplied from Ruabon, and between the eclectic Renaissance style and a buff material produced by different manufacturers.These patterns were modified as a result of the adoption of faience for facing external walls as well as interiors, and because of the new architectural requirements and tastes of the twentieth century. The general timidity in exploiting the scope for polychromatic decoration and the increasing opposition to architectural ceramics is contrasted with the most successful schemes produced for cinemas, chain-stores and factories. In the last chapter, those undertaken by the Hathern Station Brick and Terracotta Company between 1896 and 1939 are used as a case study; they confirm that manufacturers, architects and clients were all committed to creating a modern and yet decorative architecture, appropriate for new building types and that would appeal to and be comprehensible to the public.

The making of an ideology of the third way:the evolution of christian democracy in Germany (with special reference to 1945-49)

This study investigates the search for the third way in the history of German Christian Democracy. Today, in the United Kingdom, the 'third way' is seen as a new phenomenon, a synthesis of post-war belief in the welfare state and neo-liberal conservatism. Yet it insufficiently acknowledges that the origins of third way thinking, the marriage of social justice with free market economics, of individualism with collective responsibility, are found in the early philosophies of Catholic Social Theory and Protestant Social Ethical Teaching in Germany. This study shows that in the hundred years from the 1840s to the end of the 1940s, there were Catholic and Protestant socio-ethical thinkers and political reformists in Germany who attempted to bridge the philosophical differences between liberalism and socialism, to develop a socio-economic order based on Christian moral values. It will focus on the period 1945-1949, when the CDU was founded as the first interdenominational, Christian party. The study provides the first comprehensive account of the political debates in Christian democratic groups in the Soviet, British, French and American allied occupied zones, also giving equal attention to the contribution from the Protestant wing, alongside the more widely acknowledged role of Catholics in the birth of the CDU. It examines how Christian Democrats envisaged correcting the aberrations of German history, by uniting all social classes and Christian religions in one all-embracing Volkspartei, and transforming party politics from its earlier obsession with sectarian and ideological interests towards a more pragmatic 'third way' programme. The study argues that through the making of its ideology, the CDU modified the nation's understanding of its history, re-interpreted its traditions, and redefined the meaning and perception of established political philosophies. This reveals how the ambiguity of political terminology, and the flexible practice of 'third way' politics, were an invaluable political resource in the CDU's campaign for unity, ideological legitimisation and political power.

The development of a solar wall module using a selective surface

A need was indicated for the identification of a possible new solar energy product to improve the sales potential of a metal film with a selective surface, manufactured by the industriaI sponsor of this project (INCO). A possible way of overcoming the disadvantageous economics of solar energy collection was identified. This utilised the collection of solar energy by the walls of buildings constructed in such a manner as to allow the transfer of energy into the building, whilst providing adequate thermal insulation in the absence of sunlight. The actual collection element of the wall, being metallic, is also capable of performing the function of a low temperature heating .system in the absence of sunlight. As a result of this, the proposed system, by displacing both the wall and centraI heating system which would otherwise be necessary, demonstrates economic benefits over systems which are constructed solely for the purpose of collecting solar energy. The necessary thermodynamic and meteorological. characteristics and data: are established, and applied to a typical urban site in the North of England, for a typical average year, with and without a shading device incorporated into the construction. It is concluded that the proposed system may offer considerable benefit in reducing the effective heating season in all orientations of wall.

The development of an expert system for the identification anodic coating process defects as a contribution to the dissemination of anodizing technology

Initially this thesis examines the various mechanisms by which technology is acquired within anodizing plants. In so doing the history of the evolution of anodizing technology is recorded, with particular reference to the growth of major markets and to the contribution of the marketing efforts of the aluminium industry. The business economics of various types of anodizing plants are analyzed. Consideration is also given to the impact of developments in anodizing technology on production economics and market growth. The economic costs associated with work rejected for process defects are considered. Recent changes in the industry have created conditions whereby information technology has a potentially important role to play in retaining existing knowledge. One such contribution is exemplified by the expert system which has been developed for the identification of anodizing process defects. Instead of using a "rule-based" expert system, a commercial neural networks program has been adapted for the task. The advantages of neural networks over 'rule-based' systems is that they are better suited to production problems, since the actual conditions prevailing when the defect was produced are often not known with certainty. In using the expert system, the user first identifies the process stage at which the defect probably occurred and is then directed to a file enabling the actual defects to be identified. After making this identification, the user can consult a database which gives a more detailed description of the defect, advises on remedial action and provides a bibliography of papers relating to the defect. The database uses a proprietary hypertext program, which also provides rapid cross-referencing to similar types of defect. Additionally, a graphics file can be accessed which (where appropriate) will display a graphic of the defect on screen. A total of 117 defects are included, together with 221 literature references, supplemented by 48 cross-reference hyperlinks. The main text of the thesis contains 179 literature references. (DX186565)

The selection of biodiversity indicators for business landholdings

Businesses are seen as the next stage in delivering biodiversity improvements linked to local and UK Biodiversity Action Plans. Global discussion of biodiversity continues to grow, with the Millennium Ecosystem Assessment, updates to the Convention on Biological Diversity and The Economics of Ecosystems and Biodiversity being published during the time of this project. These publications and others detail the importance of biodiversity protection and also the lack of strategies to deliver this at an operational level. Pressure on UK landholding businesses is combined with significant business opportunities associated with biodiversity engagement. However, the measurement and reporting of biodiversity by business is currently limited by the complexity of the term and the lack of suitable procedures for the selection of metrics. Literature reviews identified confusion surrounding biodiversity as a term, limited academic literature regarding business and choice of biodiversity indicators. The aim of the project was to develop a methodology to enable companies to identify, quantify and monitor biodiversity. Research case studies interviews were undertaken with 10 collaborating organisations, selected to represent =best practice‘ examples and various situations. Information gained through case studies was combined with that from existing literature. This was used to develop a methodology for the selection of biodiversity indicators for company landholdings. The indicator selection methodology was discussed during a second stage of case study interviews with 4 collaborating companies. The information and opinions gained during this research was used to modify the methodology and provide the final biodiversity indicator selection methodology. The methodology was then tested through implementation at a mineral extraction site operated by a multi-national aggregates company. It was found that the methodology was a suitable process for implementation of global and national systems and conceptual frameworks at the practitioner scale. Further testing of robustness by independent parties is recommended to improve the system.