Residual stress and the yield strength of steel beams,

Sponsored jointly by the Welding Research Council and the Department of the Navy.

Corrosion tests of metallized coated steel; 6-year report.

"AWS C 2.8-62."

A note on execution costs for stock index futures: Information versus liquidity effects

This paper examines execution costs and the impact of trade size for stock index futures using price-volume transaction data from the London International Financial Futures and Options Exchange. Consistent with Subrahmanyam [Rev. Financ. Stud. 4 (1991) 11] we find that effective half spreads in the stock index futures market are small compared to stock markets, and that trades in stock index futures have only a small permanent price impact. This result is important as it helps to better understand the success of equity index products such as index futures and Exchange Traded Funds. We also find that there is no asymmetry in the post-trade price reaction between purchases and sales for stock index futures across various trade sizes. This result is consistent with the conjecture in Chan and Lakonishok [J. Financ. Econ. 33 (1993) 173] that the asymmetry surrounding block trades in stock markets is due to the high cost of short selling and the general reluctance of traders to short sell on stock markets. (C) 2004 Elsevier B.V. All rights reserved.

Ultimate strength of continuous composite beams in combined bending and shear

The contributions of the concrete slab and composite action to the vertical shear strength of continuous steel-concrete composite beams are ignored in current design codes, which result in conservative designs. This paper investigates the ultimate strength of continuous composite beams in combined bending and shear by using the finite element analysis method. A three-dimensional finite element model has been developed to account for the geometric and material nonlinear behaviour of continuous composite beams. The finite element model is verified by experimental results and then used to study the effects of the concrete slab and shear connection on the vertical shear strength. The moment-shear interaction strength of continuous composite beams is also investigated by varying the moment/ shear ratio. It is shown that the concrete slab and composite action significantly increase the ultimate strength of continuous composite beams. Based on numerical results, design models are proposed for the vertical shear strength and moment-shear interaction of continuous composite beams. The proposed design models, which incorporates the effects of the concrete slab, composite action, stud pullout failure and web shear buckling, are compared with experimental results with good agreement. (C) 2003 Elsevier Ltd. All rights reserved.

Estimating variable returns to scale production frontiers with alternative stochastic assumptions

Two stochastic production frontier models are formulated within the generalized production function framework popularized by Zellner and Revankar (Rev. Econ. Stud. 36 (1969) 241) and Zellner and Ryu (J. Appl. Econometrics 13 (1998) 101). This framework is convenient for parsimonious modeling of a production function with returns to scale specified as a function of output. Two alternatives for introducing the stochastic inefficiency term and the stochastic error are considered. In the first the errors are added to an equation of the form h(log y, theta) = log f (x, beta) where y denotes output, x is a vector of inputs and (theta, beta) are parameters. In the second the equation h(log y,theta) = log f(x, beta) is solved for log y to yield a solution of the form log y = g[theta, log f(x, beta)] and the errors are added to this equation. The latter alternative is novel, but it is needed to preserve the usual definition of firm efficiency. The two alternative stochastic assumptions are considered in conjunction with two returns to scale functions, making a total of four models that are considered. A Bayesian framework for estimating all four models is described. The techniques are applied to USDA state-level data on agricultural output and four inputs. Posterior distributions for all parameters, for firm efficiencies and for the efficiency rankings of firms are obtained. The sensitivity of the results to the returns to scale specification and to the stochastic specification is examined. (c) 2004 Elsevier B.V. All rights reserved.

Acute alcohol consumption and mechanism of injury

Objective: The purpose of this study was to determine whether injury mechanism among injured patients is differentially distributed as a function of acute alcohol consumption (quantity, type, and drinking setting). Method: A cross-sectional study was conducted between October 2000 and October 2001 in the Gold Coast Hospital Emergency Department, Queensland, Australia. Data were collected quarterly over a 12-month period. Every injured patient who presented to the emergency department during the study period for treatment of an injury sustained less than 24 hours prior to presentation was approached for interview. The final sample comprised 593 injured patients (males = 377). Three measures of alcohol consumption in the 6 hours prior to injury were obtained from self-report: quantity, beverage type, and drinking setting. The main outcome measure was mechanism of injury which was categorized into six groups: road traffic crash (RTC), being hit by or against something, fall, cut/piercing, overdose/poisoning, and miscellaneous. Injury intent was also measured (intentional vs unintentional). Results: After controlling for relevant confounding variables, neither quantity nor type of alcohol was significantly associated with injury mechanism. However, drinking setting (i.e., licensed premise) was significantly associated with increased odds of sustaining an intentional versus unintentional injury (odds ratio [OR] = 2.79, 95% confidence interval [CI] = 1.4-5.6); injury through being hit by/against something versus other injury types (OR = 2.59, 95% CI = 1.4-4.9); and reduced odds of sustaining an injury through RTC versus non-RTC (OR = 0.02, 95% CI = 0.004-0.9), compared with not drinking alcohol prior to injury. Conclusions: No previous analytical studies have examined the relationship between injury mechanism and acute alcohol consumption (quantity, type, and setting) across all types of injury and all injury severities while controlling for potentially important confounders (demographic and situational confounders, risk-taking behavior, substance use, and usual drinking patterns). These data suggest that among injured patients, mechanism of injury is not differentially distributed as a function of quantity or type of acute alcohol consumption but may be differentially distributed as a function of drinking setting (i.e., RTC, intentional injury, being hit). Therefore, prevention strategies that focus primarily on the quantity and type of alcohol consumed should be directed generically across injury mechanisms and not limited to particular cause of injury campaigns.

The production of male of-only offspring in beef cattle - a proof of principle project

The Australian beef industry places the greatest value in bulls, in comparison to cows, for prime beef production. Male carcasses can be sold for a larger profit due to their increased muscle mass. This project aims to demonstrate the feasibility of producing male animals that can sire male only offspring, through a transgenic approach in mice that could later be translated into livestock production systems. The mouse Sry (Sex determining region on the Y) gene has been shown to provide the initiating molecular signal leading to male sex determination in mammals. Sry has also been shown to cause sex reversal in XX mice transgenic for the gene. In this project Sry will be targeted to a locus not subject to X-inactivation on the X chromosome of XY mice. These mice will be bred to determine how the transgene is passed on, to determine expression of the transgene, and to assess its activity in causing XX sex reversal. The male mice transgenic for the Sry gene on their X chromosome will be produced using tetraploid aggregation, which in a single step produces 100% ES cell derived embryos. The same target locus can later be used to introduce the bovine SRY gene onto the X chromosome of bovidae species and using germ cell transplantation produce sex reversed animals. This would bypass the need for expensive chimera crosses and provide farmers with a stud bull capable of producing only sons.

Fatigue crack initiation and propagation from defects in aluminium welds

Fatigue crack initiation and propagation in aluminium butt welds has been investigated. It is shown that the initiation of cracks from both buried defects and. from the weld reinforcement may be quantified by predictive laws based on either linear elastic fracture mechanics, or on Neuber's rule of stress and strain ooncentrations. The former is preferable on the grounds of theoretical models of crack tip plasticity, although either may be used as the basis of an effeotive design criteria against crack initiation. Fatigue lives fol1owing initiation were found to follow predictions based on the integration of a Paris type power law. The effect of residual stresses from the welding operation on both initiation and propagation was accounted for by a Forman type equation. This incorporated the notional stress ratio produced by the residual stresses after various heat treatments. A fracture mechanics analysis was found to be useful in describing the fatigue behaviour of the weldments at increased temperatures up to 300°C. It is pointed out, however, that the complex interaction of residual stresses, frequency, and changes in fracture mode necessitate great caution in the application of any general design criteria against crack initiation and growth at elevated. temperatures.

The effect of heat treatment on mechanical properties of pulsed Nd:YAG welded thin Ti6Al4V

Pulsed Nd:YAG has been adopted successfully in welding process of thin (0.7 mm) Ti6Al4V. Laser welding of such thin sheet requires a small focal spot, good laser beam quality and fast travel speed, since too much heat generation can cause distortion for thin sheet weld. The microstructures of Ti6Al4V were complex and strongly affected the mechanical properties. These structures include: a´ martensite, metastable ß, Widmanstätten, bimodal, lamellar and equiaxed microstructure. Bimodal and Widmanstätten structures exhibit a good-balance between strength and ductility. The microstructure of pulsed Nd:YAG welded Ti6Al4V was primarily a´ martensite, which showed the lowest ductility but not significantly high strength. A heat treatment at 950 followed by furnace cooling can transform the microstructure in the weld from a´ martensite structure into Widmanstätten structure.

Paternal low protein diet affects adult offspring cardiovascular and metabolic function in mice

Although the association between maternal periconceptional diet and adult offspring health is well characterised, our understanding of the impact of paternal nutrition at the time of conception on offspring phenotype remains poorly defined. Therefore, we determined the effect of a paternal preconception low protein diet (LPD on adult offspring cardiovascular and metabolic health in mice. Male C57BL/6 mice were fed either normal protein diet (NPD; 18% casein or LPD (9% casein for 7 wk before mating. At birth, a reduced male-to-female ratio (P = 0.03 and increased male offspring weight (P = 0.009 were observed in litters from LPD compared with NPD stud males with no differences in mean litter size. LPD offspring were heavier than NPD offspring at 2 and 3 wk of age (P <0.02. However, no subsequent differences in body weight were observed. Adult male offspring derived from LPD studs developed relative hypotension (decreased by 9.2 mmHg and elevated heart rate (P <0.05, whereas both male and female offspring displayed vascular dysfunction and impaired glucose tolerance relative to NPD offspring. At cull (24 wk, LPD males had elevated adiposity (P = 0.04, reduced heart-to-body weight ratio (P = 0.04, and elevated circulating TNF-α levels (P = 0.015 compared with NPD males. Transcript expression in offspring heart and liver tissue was reduced for genes involved in calcium signaling (Adcy, Plcb, Prkcb and metabolism (Fto in LPD offspring (P <0.03. These novel data reveal the impact of suboptimal paternal nutrition on adult offspring cardiovascular and metabolic homeostasis, and provide some insight into the underlying regulatory mechanisms.

High stress monitoring of prestressing tendons in nuclear concrete vessels using fibre-optic sensors

Maintaining the structural health of prestressed concrete nuclear containments is a key element in ensuring nuclear reactors are capable of meeting their safety requirements. This paper discusses the attachment, fabrication and characterisation of optical fibre strain sensors suitable for the prestress monitoring of irradiated steel prestressing tendons. The all-metal fabrication and welding process allowed the instrumented strand to simultaneously monitor and apply stresses up to 1300 MPa (80% of steel's ultimate tensile strength). There were no adverse effects to the strand's mechanical properties or integrity. After sensor relaxation through cyclic stress treatment, strain transfer between the optical fibre sensors and the strand remained at 69%. The fibre strain sensors could also withstand the non-axial forces induced as the strand was deflected around a 4.5 m bend radius. Further development of this technology has the potential to augment current prestress monitoring practices, allowing distributed measurements of short- and long-term prestress losses in nuclear prestressed-concrete vessels. © 2014 Elsevier B.V.

Effect of cooling rate on intercritically reheated microstructure and toughness in high strength low alloy steel

High strength low alloy steels have been shown to be adversely affected by the existence of regions of poor impact toughness within the heat affected zone (HAZ) produced during multipass welding. One of these regions is the intercritically reheated coarse grained HAZ or intercritical zone. Since this region is generally narrow and discontinuous, of the order of 0.5 mm in width, weld simulators are often employed to produce a larger volume of uniform microstructure suitable for toughness assessment. The steel usedfor this study was a commercial quenched and tempered steel of 450 MN m -2 yield strength. Specimen blanks were subjected to a simulated welding cycle to produce a coarse grained structure of upper bainite during the first thermal cycle, followed by a second thermal cycle where the peak temperature T p2 was controlled. Charpy tests carried out for T p2 values in the range 650-850°C showed low toughness for T p2 values between 760 and 790°C, in the intercritical regime. Microstructural investigation of the development of grain boundary martensite-retained austenite (MA) phase has been coupled with image analysis to measure the volume fraction of MAformed. Most of the MA constituent appears at the prior austenite grain boundaries during intercritical heating, resulting in a 'necklace' appearance. For values of T p2 greater than 790°C the necklace appearance is lost and the second phase areas are observed throughout the structure. Concurrent with this is the development of the fine grained, predominantly ferritic structure that is associated with the improvement in toughness. At this stage the microstructure is transforming from the intercritical regime structure to the supercritically reheated coarse grained HAZ structure. The toughness improvement occurs even though the MA phase is still present, suggesting that the embrittlement is associated with the presence of a connected grain boundary network of the MA phase. The nature of the second phase particles can be controlled by the cooling rate during the second cycle and variesfrom MA phase at high cooling rates to a pearlitic structure at low cooling rates. The lowest toughness of the intercritical zone is observed only when MA phase is present. The reason suggested for this is that only the MA particles debond readily, a number of debonded particles in close proximity providing sufficient stress concentration to initiate local cleavage. © 1993 The Institute of Materials.

Sylow P-Subgroups of Abelian Group Rings

2000 Mathematics Subject Classification: Primary 20C07, 20K10, 20K20, 20K21; Secondary 16U60, 16S34.