Development of canned products from Indian major carp, catla (Catla catla)

Pieces of catla fish (Catla catla, a major carp of lndian subcontinent) of length 10 to 11 cm and thickness 1.0 to 1.5cm were precooked by two methods; steam precooking and frying. The precooked pieces were packed_in No.1 tall can (30lx411) with various hot filling media like oil, brine, tomato sauce and curry. Cans were seamed by a hand seamer and retorted at 117.2° C (12 psi) for 90 minutes. All the canned products had satisfactory cut-out, biochemical and organoleptic characteristics. Steam precooked canned products had moisture content of 65.6 to 74%, protein content of 20.8 to 22%, fat content of 1.1 to 6.6% and ash content of 2.1 to 2.5%; whereas fried canned products had moisture content of 65.4 to 68.2%, protein content of 21.3 to 22%, fat content of 7 to 10.2% and ash content of 2.1 to 2.7% on wet wt. basis. Salt content in steam precooked and fried canned products varied from 1.2 to 1.9% and 2.0 to 2.5% respectively. All the canned products were organoleptically good. However, degree of preference varied for different products. Canned fried catla in curry was the best product among all types of packs. Among the precooking methods, frying was more efficient than steam precooking in controlling the amount of exudate to a desirable limit in canned products. However, crispness, the characteristic quality for a fried fish, was lost during retorting. There was no change in quality characteristics during a storage period of 3 months at ambient temperature (32±2°C).

Diesel Cylinder Charge Properties: Feed-Forward Control and Cycle-by-Cycle Analysis Using an In-Cylinder Gas Sampling System

Common-rail fuel injection systems on modern light duty diesel engines are effectively able to respond instantaneously to changes in the demanded injection quantity. In contrast, the air-system is subject to significantly slower dynamics, primarily due to filling/emptying effects in the manifolds and turbocharger inertia. The behaviour of the air-path in a diesel engine is therefore the main limiting factor in terms of engine-out emissions during transient operation. This paper presents a simple mean-value model for the air-path during throttled operation, which is used to design a feed-forward controller that delivers very rapid changes in the in-cylinder charge properties. The feed-forward control action is validated using a state-of-the-art sampling system that allows true cycle-by-cycle measurement of the in-cylinder CO2 concentration. © 2011 SAE International.

Canning of smoked dhoma (Sciaenid sp.)

A process for the preparation of a wholesome smoked and canned product from dhoma (Sciaenid sp.) is discussed. The dressed dhoma is cold blanched in 15% brine containing 0.5% potash alum and 0.2% citric acid and smoked for 120 minutes at 45 ± 5°C. The smoked fish after filling in cans is precooked at 0.35 kg/sq.cm steam pressure for 50 minutes in inverted position, filled with hot refined groundnut oil, sealed and processed for 60 minutes at 0.7 kg/sq.cm steam pressure.

Canning of squid

A simple method for canning squid (Loligo sp.) is discussed. Hot blanching the dressed meat in 7% brine containing 0.2% citric acid for 5 min, packing and subsequent filling with 2% brine containing 0.2% citric acid and processing at 1.0 kg/cm² steam for 20 mm gave an excellent canned product with good shelf-life.

Poor fish farmers' accessibility to credits: A review

Fisheries sector contributes about 5.3% to GDP and about 6% of the export earnings of Bangladesh. There are about 4.1 million ha of inland water bodies in Bangladesh. However, over last two decades the catch from inland capture fishery has decreased due to filling of wet lands and other anthropogenic reasons. Accordingly, the production of inland fish has decreased not only for the decrease of water bodies but also due to irrational catch of fish fries, brood fishes and use of current nets for fishing. Significant responses from the fisheries entrepreneurs have not been received for the small loan scheme of the Bangladesh Bank. The bank could not disburse more than Tk. 500 million under the scheme. The total revolving credit under the scheme was Tk. 1,000 million with the assistance from the World Bank. The business houses having fixed assets of value not more than Tk. 10 million will be eligible to borrow from this fund. About Tk. 0.2-5.0 million can be borrowed as term loan and working capital from Bangladesh Bank through commercial banks. The loan was given to the commercial banks at 5% interest (bank rate) and the commercial banks shall also bridge finance to the entrepreneurs at a lower rate of interest. Working capital time limit is for a maximum of 1 year with half yearly rest, mid-term loan maximum of 3 years in 5 installments and with 6 months grace period and long-term loan maximum of 5 years in 9 installments with 6 months grace period.

Control charts: an application in shrimp canning

Control chart is a statistical tool which can be employed with advantage to learn the situation in the process (whether it is under control or not). There are different kinds of control charts but one which is most commonly used is the control chart for variables, known as X-R chart. This chart can be used for measurable characteristics in food industry like appearance, colour, sizes and dimensions for chemical properties such as moisture, fat and many other analytical counts and measurements. Since construction and maintenance of such charts involve a recognizable amount of time and effort, they should not be used indiscriminately but only where it can be definitely shown that their use improves the overall operation. Since one control chart can be used for only one quality attribute, those for which the charts are used should be selected with care (Kramer and Twigg, 1962). In this article, the procedure of setting up a variable control chart is described with observations taken on filling operation of cans in a shrimp canning factory.

Canning of oil sardine (Sardinella longiceps): natural pack

A simple and economic process for canning of oil sardine (Sardinella longiceps) in its own juice having very good organoleptic characteristics has been developed. The process consists in dipping eviscerated, scaled and cleaned fish in brine containing potash alum and citric acid, packing in cans, exhausting and seaming without addition of any filling medium and heat processing.

Canning of smoked sardine

A process for canning smoked oil sardine (Sardinella longiceps) is described. Cold blanching of dressed fish in brine, smoking followed by drying in hot air or cooking in steam to reduce the moisture content to the required level and subsequent canning yields product with good organoleptic properties. Coconut husk is used as source of smoke.

Influence of fat content on the quality and shelf life of cured sardines

The paper presents results of studies on the effect of seasonal variations in the fat content on the quality and shelf life of dry cured, pickle cured and smoke cured oil sardines. The merits and defects of each method of curing during different seasons are discussed.

The Gjerstad kiln: a combined hot and cold smoking kiln

A combined hot and cold smoking kiln has been constructed for use at Lake Turkana, Kenya. Used for cold smoking, the kiln's main advantages over the traditional kilns used in this area are its greater smoking capacity and lower firewood consumption. Having the option of using the same smoke house for cold and hot smoking reduces the total construction costs for an operator producing both types of smoke cured product. The hot smoking process was found to require markedly less firewood than cold smoking, a fact of considerable importance in desert or semi-desert areas with sparse vegetation.

Preparation and keeping quality of hot smoked mackerel

A method has been standardised for the production of smoke cured mackerel by dry salting in the ratio of 1:8 salt to fish followed by smoking in a traditional smoke chamber at 70±5°C for 5h. The smoke was generated by burning moist coconut husk and saw dust. The product obtained by this method had shelf-lives of 105, 95 and 6 days in chilled storage (0 to 2°C) refrigerated storage (10±2°C) and at room temperature (29±2°C) respectively.

Duplication and independent selection of cell-wall invertase genes GIF1 and OsCIN1 during rice evolution and domestication

Background: Various evolutionary models have been proposed to interpret the fate of paralogous duplicates, which provides substrates on which evolution selection could act. In particular, domestication, as a special selection, has played important role in crop cultivation with divergence of many genes controlling important agronomic traits. Recent studies have indicated that a pair of duplicate genes was often sub-functionalized from their ancestral functions held by the parental genes. We previously demonstrated that the rice cell-wall invertase (CWI) gene GIF1 that plays an important role in the grain-filling process was most likely subjected to domestication selection in the promoter region. Here, we report that GIF1 and another CWI gene OsCIN1 constitute a pair of duplicate genes with differentiated expression and function through independent selection. Results: Through synteny analysis, we show that GIF1 and another cell-wall invertase gene OsCIN1 were paralogues derived from a segmental duplication originated during genome duplication of grasses. Results based on analyses of population genetics and gene phylogenetic tree of 25 cultivars and 25 wild rice sequences demonstrated that OsCIN1 was also artificially selected during rice domestication with a fixed mutation in the coding region, in contrast to GIF1 that was selected in the promoter region. GIF1 and OsCIN1 have evolved into different expression patterns and probable different kinetics parameters of enzymatic activity with the latter displaying less enzymatic activity. Overexpression of GIF1 and OsCIN1 also resulted in different phenotypes, suggesting that OsCIN1 might regulate other unrecognized biological process. Conclusion: How gene duplication and divergence contribute to genetic novelty and morphological adaptation has been an interesting issue to geneticists and biologists. Our discovery that the duplicated pair of GIF1 and OsCIN1 has experiencedsub-functionalization implies that selection could act independently on each duplicate towards different functional specificity, which provides a vivid example for evolution of genetic novelties in a model crop. Our results also further support the established hypothesis that gene duplication with sub-functionalization could be one solution for genetic adaptive conflict.

Vegetation structure and faunal composition of Wathurana wetland ecosystem Tebuwana, Kalutara, Sri Lanka

A study was conducted in Tebuwana Wathurana Wetland ecosystem to understand its vegetation structure and faunal composition in order to assess its conservation needs. As there are no published records on the flora and fauna of Wathurana Wetlands in Tebuwana, it is necessary to understand the ecological and other relevant features in order to develop strategies to conserve this wetland. These objectives were pursued by surveying the vegetation of the wetland and by identifying fish and bird species present. A total of 66 species of flora and 61 species of fauna were identified in the survey. Of the 27 fish species recorded from the Tebuwana Wetland, 9 species were endemic and 17 species belonged to the indigenous category. With regard to the flora in the wetlands, the dominant families were Rubaceae, Fabaceae and Arecaceae. The 66 species belonged to 39 families and 61 genera while 12 species were endemic and 4 species were considered highly threatened. These flora were found in four layers. Of the 22 species of birds recorded, two species were endemic. This study revealed that these Wathurana Wetlands have a high species diversity but that they face many threats including encroachments, extraction of forest products mainly as timber, land filling, mining and occurrence of invasive species. It is essential to minimize the exploitation of natural resources from this wetland in the future and in particular to mark the boundary, conduct awareness programmes and continue research.

Water budgeting studies on the hatchery and nursery rearing practices for the common carp, Cyprinus carpio (Linnaeus, 1758)

Aquaculture systems are an integral element of rural development and therefore should be environment friendly as well as socially and economically designed. From the economic standpoint, one of the major constraints for the development of sustainable aquaculture includes externalities generated by competition in access to a limited resource. This study was conducted as an investigation into the water requirement for the hatchery and nursery production phases of common carp, Cyprinus carpio (Linnaeus, 1758) at the Maharashtra State Fish Seed Farm at Khopoli in Raigad Dist. of Maharashtra during the winter months from November to February. The water budgeting study involves the quantification of water used in every stage of production in hatchery and nursery systems and aimed at becoming a foundation for the minimization of water during production without affecting the yield; thereby conserving water and upholding the theme of sustainable aquaculture. The total water used in a single operation cycle was estimated to be 11,25,040 L [sic]. Out of the total water consumed, 4.74% water was used in the pre-operational management steps, 4.48% was consumed during breeding, 62.72% was consumed in the hatching phase, 21.50% was used for hatchery rearing and 6.56% was consumed during conditioning. In the nursery ponds, the water gain was primarily the regulated inflow coming through the irrigation channel. The total quantum of water used in the nursery rearing was 31,60,800 L [sic]. The initial filling and regulated inflow formed 42.60% and 57.40% respectively of water gain, while evaporation, seepage and discharge contributed 20.71%, 36.46% and 42.82% respectively to the water loss. The total water expended for the entire operation was 1,21,61,120 L [sic]. Water expense occurred to produce a single spawn in the hatchery system was calculated and found to be 0.56 L while the water expended to produce one fry was calculated as 4.86 L. The study fulfills the hydrological equation described by Winter (1981) and Boyd (1985). It also validates the water budget simulation model that can be used for forecasting water requirements for aquaculture ponds (Nath and Bolte, 1998).

Report of the Socio-economic Monitoring (SocMon) Training Workshop for Mannar, Sri Lanka, 26 May-1 June, 2015

The Socio-economic Monitoring (SocMon) training workshop followed up from the capacity building workshop held in Mannar, 2015. It's aims were to validate information collected at the previous workshop, assist in filling in any gaps and develop a vision tree fro future actions. Planned outputs included: a detailed workplan; a workshop process report; and a final socioeconomic base line report for Vidathaltivu village.