987 resultados para silicate bioceramics


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The radioactivity due to 238U and 234U in three aquifer systems occurring within the Paraná sedimentary basin, South America, has been investigated. Uranium is much less dissolved from fractured igneous rocks than from the porous sedimentary rocks as indicated by the U-mobility coefficients between 7. 6 × 10-6 and 1. 2 × 10-3 g cm-3. These values are also compatible with the U preference ratios relative to Na, K, Ca, Mg and SiO2, which showed that U is never preferentially mobilized in the liquid phase during the flow occurring in cracks, fissures, fractures and faults of the igneous basaltic rocks. Experimental dissolution of diabase grains on a time-scale laboratory has demonstrated that the U dissolution appeared to be a two-stage process characterized by linear and second-order kinetics. The U dissolution rate was 8 × 10-16 mol m-2 s-1 that is within the range of 4 × 10-16-3 × 10-14 mol m-2 s-1 estimated for other rock types. The 234U/238U activity ratio of dissolved U in solutions was higher than unity, a typical result expected during the water-rock interactions when preferential 234U-leach from the rock surfaces takes place. Some U-isotopes data allowed estimating 320 ka for the groundwater residence time in a sector of a transect in São Paulo State. A modeling has been also realized considering all U-isotopes data obtained in Bauru (35 samples), Serra Geral (16 samples) and Guarani (29 samples) aquifers. The results indicated that the Bauru aquifer waters may result from the admixture of waters from Guarani (1. 5 %) and Serra Geral (98. 5 %) aquifers. © 2012 Springer-Verlag.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The nitrogen fertilization is an important practice to reach high productivity, however, nitrogen high level can cause lodging and make the plants more sensitive to disease. Numerous studies has demonstrate that a lot of grasses accumulate silicon at its tissues, and the biggest part of this element is deposited on the leaf, that would work like a mechanical barrier to diseases come in. However, high levels of nitrogen can reduce the silica deposition at the plants. The objective of this study was to evaluate silicon and nitrogen content in shoot and silica deposition in upland rice leaf as a result of Si and N levels. The experimental design used was completely randomized in factorial schema 3 x 2 with five replications. The treatments consisted from levels of N (5, 75 and 150 mg dm-3 of soil) in urea form and two levels of SiO2 (0 e 400 mg dm-3) in calcium silicate form (Wollastonita). The increased of urea fertilization reduced the silicon content of rice plants and the silica deposition at the external cells wall the epidermal rice leafs.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Gerbera is an ornamental perennial herb, belonging to the Asteraceae family. Its cultivation, as well as the entire market for flowers and ornamental plants, is now in full expansion phase. The objective of this study was to evaluate the growth and quality Potted gerbera cultivar Red, according to sources and doses of potassium. The experiment was conducted in a greenhouse at UNESP/Botucatu. The experimental design was randomized blocks, using a 2x5 factorial arrangement, with two sources (potassium silicate and chloride) and five doses (0, 50, 100, 150 and 200 mg. L-1) 4 replications and 5 plants per plot. Weekly throughout the experimental period, assessments were made of the number of leaves (NL) and the diameter of the plant canopy (DP). at the end of the season and the reproductive cycle, at 42 and 60 days after acclimatization (DAA), respectively, were determined by leaf area (LA), mass (dry leaves (MSF), the dry mass of inflorescence (MSI) and total dry matter (TDM). at the point of marketing is that of open stamens, when the inflorescence had at least two rounds of open, releasing pollen, we determined the number of inflorescences (NI), the diameter of inflorescence (DI), the stem height (AH), the shank diameter (DH) and plant height (PH). Regardless of the doses, potassium silicate promoted greater diameter, leaf area, greater MSF, MST and increased stem height, characteristics that favor the sale of potted gerbera.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Blast furnace slag (BFS)/sugar cane bagasse ash (SCBA) blends were assessed for the production of alkali-activated pastes and mortars. SCBA was collected from a lagoon in which wastes from a sugar cane industry were poured. After previous dry and grinding processes, SCBA was chemically characterized: it had a large percentage of organic matter (ca. 25%). Solutions of sodium hydroxide and sodium silicate were used as activating reagents. Different BFS/SCBA mixtures were studied, replacing part of the BFS by SCBA from 0 to 40% by weight. The mechanical strength of mortar was measured, obtaining values about 60 MPa of compressive strength for BFS/SCBA systems after 270 days of curing at 20 °C. Also, microstructural properties were assessed by means of SEM, TGA, XRD, pH, electrical conductivity, FTIR spectroscopy and MIP. Results showed a good stability of matrices developed by means of alkali-activation. It was demonstrated that sugar cane bagasse ash is an interesting source for preparing alkali-activated binders. © 2013 by the authors; licensee MDPI, Basel, Switzerland.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work, surface modification of the Ti-6Al-4V alloy by irradiation with a Nd:YAG laser beam was studied. The matrix spacing was varied and the other parameters were kept constant. After theirradiation, the samples were immersed into SBF solution (Simulated Body Fluid) for 7 days at 37 ° C for nucleation and formation of calcium phosphates. After this period, the samples were subjected to a heat treatment at 600 °C. X-ray diffraction results indicated the formation of a mixture of phases containing hydroxyapatite and tricalcium phosphate. Infrared analysis demonstrated the presence of bands related to hydroxyapatite. SEM micrographs showed that different matrix spacing used leads to the formation of different morphologies.The 0.01 cm spacing induced the formation of microspheres, characteristic of the hydroxyapatite phase, while for 0.02 cm spacing, only a non-homogeneous coating was obtained. Therefore, the use of laser in the production of active surfaces for deposition of bioceramics proved to be viable, and the final coating has potential for applications in the field of dental implants.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Agricultura) - FCA

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)