Manual of federal appellate procedure; a concise and practical treatise, annotated, on all proceedings necessary to take and perfect appeals, writs of error, petitions for review in bankruptcy, petitions to review orders of Federal trade commission, Interstate commerce commission, Federal reserve boards, decisions of District court in awards of arbitration, and federal tax appeal cases and appeals in admiralty cases ...

"Appendix (p.203-292) Rules of the United States Circuit court of appeals for the Ninth circuit. Revised rules for the Supreme Court of the United States, under act of February 13, 1925, as amended June 7, 1926. Requirements respecting petitions for writs of certiorari under the act of February 13, 1925. Jurisdictional act of February 13, 1925, as amended April 3, 1926. Sections 24 and 25 of the Bankruptcy act, as amended May 28, 1926, effective August 28, 1926."

Statistical Hurdle Models for Single Cell Gene Expression: Differential Expression and Graphical Modeling

Thesis (Ph.D.)--University of Washington, 2016-06

Dizziness and unsteadiness following whiplash injury: Characteristic features and relationship with cervical joint position error

Dizziness and/or unsteadiness are common symptoms of chronic whiplash-associated disorders. This study aimed to report the characteristics of these symptoms and determine whether there was any relationship to cervical joint position error. Joint position error, the accuracy to return to the natural head posture following extension and rotation, was measured in 102 subjects with persistent whiplash-associated disorder and 44 control subjects. Whiplash subjects completed a neck pain index and answered questions about the characteristics of dizziness. The results indicated that subjects with whiplash-associated disorders had significantly greater joint position errors than control subjects. Within the whiplash group, those with dizziness had greater joint position errors than those without dizziness following rotation (rotation (R) 4.5degrees (0.3) vs 2.9degrees (0.4); rotation (L) 3.9degrees (0.3) vs 2.8degrees (0.4) respectively) and a higher neck pain index (55.3% (1.4) vs 43.1% (1.8)). Characteristics of the dizziness were consistent for those reported for a cervical cause but no characteristics could predict the magnitude of joint position error. Cervical mechanoreceptor dysfunction is a likely cause of dizziness in whiplash-associated disorder.

Random error in willingness to pay measurement: A multiple indicators, latent variable approach to the reliability of contingent values

The reliability of measurement refers to unsystematic error in observed responses. Investigations of the prevalence of random error in stated estimates of willingness to pay (WTP) are important to an understanding of why tests of validity in CV can fail. However, published reliability studies have tended to adopt empirical methods that have practical and conceptual limitations when applied to WTP responses. This contention is supported in a review of contingent valuation reliability studies that demonstrate important limitations of existing approaches to WTP reliability. It is argued that empirical assessments of the reliability of contingent values may be better dealt with by using multiple indicators to measure the latent WTP distribution. This latent variable approach is demonstrated with data obtained from a WTP study for stormwater pollution abatement. Attitude variables were employed as a way of assessing the reliability of open-ended WTP (with benchmarked payment cards) for stormwater pollution abatement. The results indicated that participants' decisions to pay were reliably measured, but not the magnitude of the WTP bids. This finding highlights the need to better discern what is actually being measured in VVTP studies, (C) 2003 Elsevier B.V. All rights reserved.

Improving precision and reducing bias in biological surveys: estimating false-negative error rates

The use of presence/absence data in wildlife management and biological surveys is widespread. There is a growing interest in quantifying the sources of error associated with these data. We show that false-negative errors (failure to record a species when in fact it is present) can have a significant impact on statistical estimation of habitat models using simulated data. Then we introduce an extension of logistic modeling, the zero-inflated binomial (ZIB) model that permits the estimation of the rate of false-negative errors and the correction of estimates of the probability of occurrence for false-negative errors by using repeated. visits to the same site. Our simulations show that even relatively low rates of false negatives bias statistical estimates of habitat effects. The method with three repeated visits eliminates the bias, but estimates are relatively imprecise. Six repeated visits improve precision of estimates to levels comparable to that achieved with conventional statistics in the absence of false-negative errors In general, when error rates are less than or equal to50% greater efficiency is gained by adding more sites, whereas when error rates are >50% it is better to increase the number of repeated visits. We highlight the flexibility of the method with three case studies, clearly demonstrating the effect of false-negative errors for a range of commonly used survey methods.

Quantum-error correction on linear-nearest-neighbor qubit arrays

A quantum circuit implementing 5-qubit quantum-error correction on a linear-nearest-neighbor architecture is described. The canonical decomposition is used to construct fast and simple gates that incorporate the necessary swap operations allowing the circuit to achieve the same depth as the current least depth circuit. Simulations of the circuit's performance when subjected to discrete and continuous errors are presented. The relationship between the error rate of a physical qubit and that of a logical qubit is investigated with emphasis on determining the concatenated error correction threshold.

Practical scheme for error control using feedback

We describe a scheme for quantum-error correction that employs feedback and weak measurement rather than the standard tools of projective measurement and fast controlled unitary gates. The advantage of this scheme over previous protocols [for example, Ahn Phys. Rev. A 65, 042301 (2001)], is that it requires little side processing while remaining robust to measurement inefficiency, and is therefore considerably more practical. We evaluate the performance of our scheme by simulating the correction of bit flips. We also consider implementation in a solid-state quantum-computation architecture and estimate the maximal error rate that could be corrected with current technology.

Enhanced biological phosphorus removal in a sequencing batch reactor using propionate as the sole carbon source

An enhanced biological phosphorus removal (EBPR) system was developed in a sequencing batch reactor (SBR) using propionate as the sole carbon source. The microbial community was followed using fluorescence in situ hybridization (FISH) techniques and Candidatus 'Accumulibacter phosphatis' were quantified from the start up of the reactor until steady state. A series of SBR cycle studies was performed when 55% of the SBR biomass was Accumulibacter, a confirmed polyphosphate accumulating organism (PAO) and when Candidatus 'Competibacter phosphatis,' a confirmed glycogen-accumulating organism (GAO), was essentially undetectable. These experiments evaluated two different carbon sources (propionate and acetate), and in every case, two different P-release rates were detected. The highest rate took place while there was volatile fatty acid (VFA) in the mixed liquor, and after the VFA was depleted a second P-release rate was observed. This second rate was very similar to the one detected in experiments performed without added VFA. A kinetic and stoichiometric model developed as a modification of Activated Sludge Model 2 (ASM2) including glycogen economy, was fitted to the experimental profiles. The validation and calibration of this model was carried out with the cycle study experiments performed using both VFAs. The effect of pH from 6.5 to 8.0 on anaerobic P-release and VFA-uptake and aerobic P-uptake was also studied using propionate. The optimal overall working pH was around 7.5. This is the first study of the microbial community involved in EBPR developed with propionate as a sole carbon source along with detailed process performance investigations of the propionate-utilizing PAOs. (C) 2004 Wiley Periodicals, Inc.

Functional promoter analysis using an approach based on an in vitro evolution strategy

In vitro evolution imitates the natural evolution of genes and has been very successfully applied to the modification of coding sequences, but it has not yet been applied to promoter sequences. We propose an alternative method for functional promoter analysis by applying an in vitro evolution scheme consisting of rounds of error-prone PCR, followed by DNA shuffling and selection of mutant promoter activities. We modified the activity in embryogenic sugarcane cells of the promoter region of the Goldfinger isolate of banana streak virus and obtained mutant promoter sequences that showed an average mutation rate of 2.5% after applying one round of error-prone PCR and DNA shuffling. Selection and sequencing of promoter sequences with decreased or unaltered activity allowed us to rapidly map the position of one cis-acting element that influenced promoter activity in embryogenic sugarcane cells and to discover neutral mutations that did not affect promoter Junction. The selective-shotgun approach of this promoter analysis method immediately after the promoter boundaries have been defined by 5' deletion analysis dramatically reduces the labor associated with traditional linker-scanning deletion analysis to reveal the position of functional promoter domains. Furthermore, this method allows the entire promoter to be investigated at once, rather than selected domains or nucleotides, increasing the, prospect of identifying interacting promoter regions.

High-fidelity Z-measurement error encoding of optical qubits

We demonstrate a quantum error correction scheme that protects against accidental measurement, using a parity encoding where the logical state of a single qubit is encoded into two physical qubits using a nondeterministic photonic controlled-NOT gate. For the single qubit input states vertical bar 0 >, vertical bar 1 >, vertical bar 0 > +/- vertical bar 1 >, and vertical bar 0 > +/- i vertical bar 1 > our encoder produces the appropriate two-qubit encoded state with an average fidelity of 0.88 +/- 0.03 and the single qubit decoded states have an average fidelity of 0.93 +/- 0.05 with the original state. We are able to decode the two-qubit state (up to a bit flip) by performing a measurement on one of the qubits in the logical basis; we find that the 64 one-qubit decoded states arising from 16 real and imaginary single-qubit superposition inputs have an average fidelity of 0.96 +/- 0.03.

Continuous quantum error correction by cooling

We describe an implementation of quantum error correction that operates continuously in time and requires no active interventions such as measurements or gates. The mechanism for carrying away the entropy introduced by errors is a cooling procedure. We evaluate the effectiveness of the scheme by simulation, and remark on its connections to some recently proposed error prevention procedures.

Zero-non-zero patterned vector error correction modeling for I(2) cointegrated time series with applications in testing PPP and stock market relationships

Vector error-correction models (VECMs) have become increasingly important in their application to financial markets. Standard full-order VECM models assume non-zero entries in all their coefficient matrices. However, applications of VECM models to financial market data have revealed that zero entries are often a necessary part of efficient modelling. In such cases, the use of full-order VECM models may lead to incorrect inferences. Specifically, if indirect causality or Granger non-causality exists among the variables, the use of over-parameterised full-order VECM models may weaken the power of statistical inference. In this paper, it is argued that the zero–non-zero (ZNZ) patterned VECM is a more straightforward and effective means of testing for both indirect causality and Granger non-causality. For a ZNZ patterned VECM framework for time series of integrated order two, we provide a new algorithm to select cointegrating and loading vectors that can contain zero entries. Two case studies are used to demonstrate the usefulness of the algorithm in tests of purchasing power parity and a three-variable system involving the stock market.

The use and implications of ribosomal DNA sequencing for the discrimination of digenean species

In just over a decade, the use of molecular approaches for the recognition of parasites has become commonplace. For trematodes, the internal transcribed spacer region of ribosomal DNA (ITS rDNA) has become the default region of choice. Here, we review the findings of 63 studies that report ITS rDNA sequence data for about 155 digenean species from 19 families, and then review the levels of variation that have been reported and how the variation has been interpreted. Overall, complete ITS sequences (or ITS1 or ITS2 regions alone) usually distinguish trematode species clearly, including combinations for which morphology gives ambiguous results. Closely related species may have few base differences and in at least one convincing case the ITS2 sequences of two good species are identical. In some cases, the ITS1 region gives greater resolution than the ITS2 because of the presence of variable repeat units that are generally lacking in the ITS2. Intraspecific variation is usually low and frequently apparently absent. Information on geographical variation of digeneans is limited but at least some of the reported variation probably reflects the presence of multiple species. Despite the accepted dogma that concerted evolution makes the individual representative of the entire species, a significant number of studies have reported at least some intraspecific variation. The significance of such variation is difficult to assess a posteriori, but it seems likely that identification and sequencing errors account for some of it and failure to recognise separate species may also be significant. Some reported variation clearly requires further analysis. The use of a yardstick to determine when separate species should be recognised is flawed. Instead, we argue that consistent genetic differences that are associated with consistent morphological or biological traits should be considered the marker for separate species. We propose a generalised approach to the use of rDNA to distinguish trematode species.