Optimized HOG for on-road video based vehicle verification

Vision-based object detection from a moving platform becomes particularly challenging in the field of advanced driver assistance systems (ADAS). In this context, onboard vision-based vehicle verification strategies become critical, facing challenges derived from the variability of vehicles appearance, illumination, and vehicle speed. In this paper, an optimized HOG configuration for onboard vehicle verification is proposed which not only considers its spatial and orientation resolution, but descriptor processing strategies and classification. An in-depth analysis of the optimal settings for HOG for onboard vehicle verification is presented, in the context of SVM classification with different kernels. In contrast to many existing approaches, the evaluation is realized in a public and heterogeneous database of vehicle and non-vehicle images in different areas of the road, rendering excellent verification rates that outperform other similar approaches in the literature.

Sobre el comportamiento de micropilotes trabajando a flexión y/o cortante en estructuras de tierra

El empleo de los micropilotes en la ingeniería civil ha revolucionado las técnicas de estabilización de terraplenes a media ladera, ya que aunque los pilotes pueden ser la opción más económica, el uso de micropilotes permite llegar a sitios inaccesibles con menor coste de movimientos de tierras, realización de plataformas de trabajo de dimensiones reducidas, maquinaria necesaria es mucho más pequeña, liviana y versátil en su uso, incluyendo la posibilidad de situar la fabricación de morteros o lechadas a distancias de varias decenas de metros del elemento a ejecutar. Sin embargo, realizando una revisión de la documentación técnica que se tiene en el ámbito ingenieril, se comprobó que los sistemas de diseño de algunos casos (micropilotes en terraplenes a media ladera, micropilotes en pantallas verticales, micropilotes como “paraguas” en túneles, etc.) eran bastante deficientes o poco desarrollados. Premisa que permite concluir que el constructor ha ido por delante (como suele ocurrir en ingeniería geotécnica) del cálculo o de su análisis teórico. Del mismo modo se determinó que en su mayoría los micropilotes se utilizan en labores de recalce o como nueva solución de cimentación en condiciones de difícil acceso, casos en los que el diseño de los micropilotes viene definido por cargas axiales, de compresión o de tracción, consideraciones que se contemplan en reglamentaciones como la “Guía para el proyecto y la ejecución de micropilotes en obras de carretera” del Ministerio de Fomento. En los micropilotes utilizados para estabilizar terraplenes a media ladera y micropilotes actuando como muros pantalla, en los que éstos trabajan a esfuerzo cortante y flexión, no se dispone de sistemas de análisis fiables o no se introduce adecuadamente el problema de interacción terreno-micropilote. Además en muchos casos, los parámetros geotécnicos que se utilizan no tienen una base técnico-teórica adecuada por lo que los diseños pueden quedar excesivamente del lado de la seguridad, en la mayoría de los casos, o todo lo contrario. Uno de los objetivos principales de esta investigación es estudiar el comportamiento de los micropilotes que están sometidos a esfuerzos de flexión y cortante, además de otros objetivos de gran importancia que se describen en el apartado correspondiente de esta tesis. Cabe indicar que en este estudio no se ha incluido el caso de micropilotes quasi-horizontales trabajando a flexion (como los “paraguas” en túneles), por considerarse que estos tienen un comportamiento y un cálculo diferente, que está fuera del alcance de esta investigación. Se ha profundizado en el estudio del empleo de micropilotes en taludes, presentando casos reales de obras ejecutadas, datos estadísticos, problemas de diseño y ejecución, métodos de cálculo simplificados y modelación teórica en cada caso, efectuada mediante el empleo de elementos finitos con el Código Plaxis 2D. Para llevar a cabo los objetivos que se buscan con esta investigación, se ha iniciado con el desarrollo del “Estado del Arte” que ha permitido establecer tipología, aplicaciones, características y cálculo de los micropilotes que se emplean habitualmente. Seguidamente y a efectos de estudiar el problema dentro de un marco geotécnico real, se ha seleccionado una zona española de actuación, siendo ésta Andalucía, en la que se ha utilizado de manera muy importante la técnica de micropilotes sobre todo en problemas de estabilidad de terraplenes a media ladera. A partir de ahí, se ha realizado un estudio de las propiedades geotécnicas de los materiales (principalmente suelos y rocas muy blandas) que están presentes en esta zona geográfica, estudio que ha sido principalmente bibliográfico o a partir de la experiencia en la zona del Director de esta tesis. Del análisis realizado se han establecido ordenes de magnitud de los parámetros geotécnicos, principalmente la cohesión y el ángulo de rozamiento interno (además del módulo de deformación aparente o de un módulo de reacción lateral equivalente) para los diversos terrenos andaluces. Con el objeto de conocer el efecto de la ejecución de un micropilote en el terreno (volumen medio real del micropilote, una vez ejecutado; efecto de la presión aplicada en las propiedades del suelo circundante, etc.) se ha realizado una encuesta entre diversas empresas españolas especializadas en la técnica de los micropilotes, a efectos de controlar los volúmenes de inyección y las presiones aplicadas, en función de la deformabilidad del terreno circundante a dichos micropilotes, con lo que se ha logrado definir una rigidez a flexión equivalente de los mismos y la definición y características de una corona de terreno “mejorado” lograda mediante la introducción de la lechada y el efecto de la presión alrededor del micropilote. Con las premisas anteriores y a partir de los parámetros geotécnicos determinados para los terrenos andaluces, se ha procedido a estudiar la estabilidad de terraplenes apoyados sobre taludes a media ladera, mediante el uso de elementos finitos con el Código Plaxis 2D. En el capítulo 5. “Simulación del comportamiento de micropilotes estabilizando terraplenes”, se han desarrollado diversas simulaciones. Para empezar se simplificó el problema simulando casos similares a algunos reales en los que se conocía que los terraplenes habían llegado hasta su situación límite (de los que se disponía información de movimientos medidos con inclinómetros), a partir de ahí se inició la simulación de la inestabilidad para establecer el valor de los parámetros de resistencia al corte del terreno (mediante un análisis retrospectivo – back-análisis) comprobando a su vez que estos valores eran similares a los deducidos del estudio bibliográfico. Seguidamente se han introducido los micropilotes en el borde de la carretera y se ha analizado el comportamiento de éstos y del talud del terraplén (una vez construidos los micropilotes), con el objeto de establecer las bases para su diseño. De este modo y adoptando los distintos parámetros geotécnicos establecidos para los terrenos andaluces, se simularon tres casos reales (en Granada, Málaga y Ceuta), comparando los resultados de dichas simulaciones numéricas con los resultados de medidas reales de campo (desplazamientos del terreno, medidos con inclinómetros), obteniéndose una reproducción bastante acorde a los movimientos registrados. Con las primeras simulaciones se concluye que al instalar los micropilotes la zona más insegura de la ladera es la de aguas abajo. La superficie de rotura ya no afecta a la calzada que protegen los micropilotes. De ahí que se deduzca que esta solución sea válida y se haya aplicado masivamente en Andalucía. En esas condiciones, podría decirse que no se está simulando adecuadamente el trabajo de flexión de los micropilotes (en la superficie de rotura, ya que no les corta), aunque se utilicen elementos viga. Por esta razón se ha realizado otra simulación, basada en las siguientes hipótesis: − Se desprecia totalmente la masa potencialmente deslizante, es decir, la que está por delante de la fila exterior de micros. − La estratigrafía del terreno es similar a la considerada en las primeras simulaciones. − La barrera de micropilotes está constituida por dos elementos inclinados (uno hacia dentro del terraplén y otro hacia fuera), con inclinación 1(H):3(V). − Se puede introducir la rigidez del encepado. − Los micros están separados 0,556 m ó 1,00 m dentro de la misma alineación. − El empotramiento de los micropilotes en el sustrato resistente puede ser entre 1,5 y 7,0 m. Al “anular” el terreno que está por delante de los micropilotes, a lo largo del talud, estos elementos empiezan claramente a trabajar, pudiendo deducirse los esfuerzos de cortante y de flexión que puedan actuar sobre ellos (cota superior pero prácticamente muy cerca de la solución real). En esta nueva modelación se ha considerado tanto la rigidez equivalente (coeficiente ϴ) como la corona de terreno tratado concéntrico al micropilote. De acuerdo a esto último, y gracias a la comparación de estas modelaciones con valores reales de movimientos en laderas instrumentadas con problemas de estabilidad, se ha verificado que existe una similitud bastante importante entre los valores teóricos obtenidos y los medidos en campo, en relación al comportamiento de los micropilotes ejecutados en terraplenes a media ladera. Finalmente para completar el análisis de los micropilotes trabajando a flexión, se ha estudiado el caso de micropilotes dispuestos verticalmente, trabajando como pantallas discontinuas provistas de anclajes, aplicado a un caso real en la ciudad de Granada, en la obra “Hospital de Nuestra Señora de la Salud”. Para su análisis se utilizó el código numérico CYPE, basado en que la reacción del terreno se simula con muelles de rigidez Kh o “módulo de balasto” horizontal, introduciendo en la modelación como variables: a) Las diferentes medidas obtenidas en campo; b) El espesor de terreno cuaternario, que por lo que se pudo determinar, era variable, c) La rigidez y tensión inicial de los anclajes. d) La rigidez del terreno a través de valores relativos de Kh, recopilados en el estudio de los suelos de Andalucía, concretamente en la zona de Granada. Dicha pantalla se instrumentó con 4 inclinómetros (introducidos en los tubos de armadura de cuatro micropilotes), a efectos de controlar los desplazamientos horizontales del muro de contención durante las excavaciones pertinentes, a efectos de comprobar la seguridad del conjunto. A partir del modelo de cálculo desarrollado, se ha comprobado que el valor de Kh pierde importancia debido al gran número de niveles de anclajes, en lo concerniente a las deformaciones horizontales de la pantalla. Por otro lado, los momentos flectores son bastante sensibles a la distancia entre anclajes, al valor de la tensión inicial de los mismos y al valor de Kh. Dicho modelo también ha permitido reproducir de manera fiable los valores de desplazamientos medidos en campo y deducir los parámetros de deformabilidad del terreno, Kh, con valores del orden de la mitad de los medidos en el Metro Ligero de Granada, pero visiblemente superiores a los deducibles de ábacos que permiten obtener Kh para suelos granulares con poca cohesión (gravas y cuaternario superior de Sevilla) como es el caso del ábaco de Arozamena, debido, a nuestro juicio, a la cementación de los materiales presentes en Granada. En definitiva, de las anteriores deducciones se podría pensar en la optimización del diseño de los micropilotes en las obras que se prevean ejecutar en Granada, con similares características al caso de la pantalla vertical arriostrada mediante varios niveles de anclajes y en las que los materiales de emplazamiento tengan un comportamiento geotécnico similar a los estudiados, con el consiguiente ahorro económico. Con todo ello, se considera que se ha hecho una importante aportación para el diseño de futuras obras de micropilotes, trabajando a flexión y cortante, en obras de estabilización de laderas o de excavaciones. Using micropiles in civil engineering has transformed the techniques of stabilization of embankments on the natural or artificial slopes, because although the piles may be the cheapest option, the use of micropiles can reach inaccessible places with lower cost of earthworks, carrying out small work platforms. Machinery used is smaller, lightweight and versatile, including the possibility of manufacturing mortars or cement grouts over distances of several tens of meters of the element to build. However, making a review of the technical documentation available in the engineering field, it was found that systems designed in some cases (micropiles in embankments on the natural slopes, micropiles in vertical cut-off walls, micropiles like "umbrella" in tunnels, etc.) were quite poor or underdeveloped. Premise that concludes the builder has gone ahead (as usually happen in geotechnical engineering) of calculation or theoretical analysis. In the same way it was determined that most of the micropiles are used in underpinning works or as a new foundation solution in conditions of difficult access, in which case the design of micropiles is defined by axial, compressive or tensile loads, considered in regulations as the " Handbook for the design and execution of micropiles in road construction" of the Ministry of Development. The micropiles used to stabilize embankments on the slopes and micropiles act as retaining walls, where they work under shear stress and bending moment, there are not neither reliable systems analysis nor the problem of soil-micropile interaction are properly introduced. Moreover, in many cases, the geotechnical parameters used do not have a proper technical and theoretical basis for what designs may be excessively safe, or the opposite, in most cases. One of the main objectives of this research is to study the behavior of micro piles which are subjected to bending moment and shear stress, as well as other important objectives described in the pertinent section of this thesis. It should be noted that this study has not included the case of quasi-horizontal micropiles working bending moment (as the "umbrella" in tunnels), because it is considered they have a different behavior and calculation, which is outside the scope of this research. It has gone in depth in the study of using micropiles on slopes, presenting real cases of works made, statistics, problems of design and implementation, simplified calculation methods and theoretical modeling in each case, carried out by using FEM (Finite Element Method) Code Plaxis 2D. To accomplish the objectives of this research, It has been started with the development of the "state of the art" which stipulate types, applications, characteristics and calculation of micropiles that are commonly used. In order to study the problem in a real geotechnical field, it has been selected a Spanish zone of action, this being Andalusia, in which it has been used in a very important way, the technique of micropiles especially in embankments stability on natural slopes. From there, it has made a study of the geotechnical properties of the materials (mainly very soft soils and rocks) that are found in this geographical area, which has been mainly a bibliographic study or from the experience in the area of the Director of this thesis. It has been set orders of magnitude of the geotechnical parameters from analyzing made, especially the cohesion and angle of internal friction (also apparent deformation module or a side reaction module equivalent) for various typical Andalusian ground. In order to determine the effect of the implementation of a micropile on the ground (real average volume of micropile once carried out, effect of the pressure applied on the properties of the surrounding soil, etc.) it has conducted a survey among various skilled companies in the technique of micropiles, in order to control injection volumes and pressures applied, depending on the deformability of surrounding terrain such micropiles, whereby it has been possible to define a bending stiffness and the definition and characteristics of a crown land "improved" achieved by introducing the slurry and the effect of the pressure around the micropile. With the previous premises and from the geotechnical parameters determined for the Andalusian terrain, we proceeded to study the stability of embankments resting on batters on the slope, using FEM Code Plaxis 2D. In the fifth chapter "Simulation of the behavior of micropiles stabilizing embankments", there were several different numerical simulations. To begin the problem was simplified simulating similar to some real in which it was known that the embankments had reached their limit situation (for which information of movements measured with inclinometers were available), from there the simulation of instability is initiated to set the value of the shear strength parameters of the ground (by a retrospective analysis or back-analysis) checking these values were similar to those deduced from the bibliographical study Then micropiles have been introduced along the roadside and its behavior was analyzed as well as the slope of embankment (once micropiles were built ), in order to establish the basis for its design. In this way and taking the different geotechnical parameters for the Andalusian terrain, three real cases (in Granada, Malaga and Ceuta) were simulated by comparing the results of these numerical simulations with the results of real field measurements (ground displacements measured with inclinometers), getting quite consistent information according to registered movements. After the first simulations it has been concluded that after installing the micropiles the most insecure area of the natural slope is the downstream. The failure surface no longer affects the road that protects micropiles. Hence it is inferred that this solution is acceptable and it has been massively applied in Andalusia. Under these conditions, one could say that it is not working properly simulating the bending moment of micropiles (on the failure surface, and that does not cut them), although beam elements are used. Therefore another simulation was performed based on the following hypotheses: − The potentially sliding mass is totally neglected, that is, which is ahead of the outer row of micropiles. − Stratigraphy field is similar to the one considered in the first simulations. − Micropiles barrier is constituted by two inclined elements (one inward and one fill out) with inclination 1 (H): 3 (V). − You can enter the stiffness of the pile cap. − The microlies lines are separated 0.556 m or 1.00 m in the same alignment. − The embedding of the micropiles in the tough substrate can be between 1.5 and 7.0 m. To "annul" the ground that is in front of the micro piles, along the slope, these elements clearly start working, efforts can be inferred shear stress and bending moment which may affect them (upper bound but pretty close to the real) solution. In this new modeling it has been considered both equivalent stiffness coefficient (θ) as the treated soil crown concentric to the micropile. According to the latter, and by comparing these values with real modeling movements on field slopes instrumented with stability problems, it was verified that there is quite a significant similarity between the obtained theoretical values and the measured field in relation to the behavior of micropiles executed in embankments along the natural slope. Finally to complete the analysis of micropiles working in bending conditions, we have studied the case of micropiles arranged vertically, working as discontinued cut-off walls including anchors, applied to a real case in the city of Granada, in the play "Hospital of Our Lady of the Health ". CYPE numeric code, based on the reaction of the ground is simulated spring stiffness Kh or "subgrade" horizontal, introduced in modeling was used as variables for analysis: a) The different measurements obtained in field; b) The thickness of quaternary ground, so that could be determined, was variable, c) The stiffness and the prestress of the anchors. d) The stiffness of the ground through relative values of Kh, collected in the study of soils in Andalusia, particularly in the area of Granada. (previously study of the Andalusia soils) This cut-off wall was implemented with 4 inclinometers (introduced in armor tubes four micropiles) in order to control the horizontal displacements of the retaining wall during the relevant excavations, in order to ensure the safety of the whole. From the developed model calculation, it was found that the value of Kh becomes less important because a large number of anchors levels, with regard to the horizontal deformation of the cut-off wall. On the other hand, the bending moments are quite sensitive to the distance between anchors, the initial voltage value thereof and the value of Kh. This model has also been reproduced reliably displacement values measured in the field and deduce parameters terrain deformability, Kh, with values around half the measured Light Rail in Granada, but visibly higher than deductible of abacuses which can obtain Kh for granular soils with low cohesion (upper Quaternary gravels and Sevilla) such as Abacus Arozamena, because, in our view, to cementing materials in Granada. In short, previous deductions you might think on optimizing the design of micropiles in the works that are expected to perform in Granada, with similar characteristics to the case of the vertical cut-off wall braced through several levels of anchors and in which materials location have a geotechnical behavior similar to those studied, with the consequent economic savings. With all this, it is considered that a significant contribution have been made for the design of future works of micropiles, bending moment and shear stress working in slope stabilization works or excavations.

Road to 1966 : caminos hacia "complejidad y contradicción en la arquitectura", en la cultura arquitectónica de la segunda posguerra en EE.UU

Complejidad y contradicción en la arquitectura ha resultado ser una de las referencias capitales más aludidas, citadas y reproducidas de la literatura arquitectónica de los tiempos recientes. No en vano, en la introducción de la propia obra, Vincent Scully afirmó que «probablemente es el texto más importante sobre arquitectura desde ‘Vers une Architecture’, escrito por Le Corbusier en 1923». Sin embargo, sus fuentes parece que están inexploradas o, al menos, no examinadas. Por ello, Road to 1966 se plantea como un trabajo de investigación con tres objetivos de partida fundamentales: (1) el interés en estudiar el debate arquitectónico candente, creado con las fricciones surgidas entre los protagonistas de unos años que cambiaron el estado de lo que se consideraba una obra legítima en arquitectura; (2) se pretende ampliar la cronología del desarrollo intelectual de un texto, el de Venturi, que marcó la segunda mitad del siglo xx, de manera retroactiva hasta los años de la II Guerra Mundial, cuando parece que empezaban a ser coherentes y reconocibles unas nuevas posiciones desde las que aproximarse a las cuestiones de la práctica, la teoría y la historia de la arquitectura; (3) poder ofrecer una nueva interpretación de dicho texto de Venturi, entendido no como el origen primigenio de parte de las grandes transformaciones de la arquitectura reciente (de los últimos cincuenta años), sino como el resultado necesario de esa cronología intelectual previa. La arquitectura norteamericana de estos años de posguerra ha resultado ser crucial en su posterior desarrollo, y, especialmente, en relación al libro de Venturi. De hecho, Scully en la introducción de la edición original de Complejidad y contradicción, señalaba que «el principal argumento del libro está expuesto a finales de los cincuenta». Que la arquitectura del siglo xx tiene en la Norteamérica de los años sesenta -cuando se consolida la figura de Venturi- uno de sus capítulos más decisivos, frecuentemente asumido como el paso siguiente a la importada modernidad heroica europea, hoy parece no ser discutido por casi nadie. Ahora bien: ¿qué ocurre con los años intermedios? ¿Qué acontece entre el final de la II Guerra Mundial y esos años sesenta? La posible carencia de una postura dominante y clara quizás haya sumido esta etapa en un cierto olvido o descuido por parte de historiadores y críticos. Así, este trabajo se estructura alrededor del papel que ocupa el texto venturiano, sin ser éste su único protagonista. Tomado más bien como excusa, la tesis va profundizando de manera deductiva en el conjunto de circunstancias que pudieron llevar a su autor hacia las conclusiones que desarrolló, detectando los ambientes biográficos y formativos, pensamientos compartidos e influencias epistemológicas y profesionales mutuas, que justificarían una novedosa interpretación de dicho texto como el corolario necesario de un panorama de crisis y cambios - éste sí protagonista en este trabajo-, al contrario de cómo habitualmente se ha venido entendiendo dicha obra. La investigación se centra predominantemente en el rastreo de las fuentes citadas por el propio Venturi en su libro, así como de los textos de mayor difusión (generalmente revistas profesionales no exclusivamente académicas, además de libros, catálogos de exposiciones, actas de simposios…), y no tanto en las obras construidas o proyectadas; sí, quizás, en los términos en los que dichas obras fueron publicadas, comentadas o reseñadas. Así, se ha adoptado una aproximación concebida sub specie bibliotecae, donde se han aplicado unos métodos de trabajo caracterizados por su componente cronológica, y, después, analítico-comparativa: dicho de otro modo, un método historiográfico-periodístico capaz de relacionar las historias o cursos de ciertas ideas o nociones, dentro de un contexto general más amplio en sus derivadas arquitectónicas, estéticas, socio-generacionales, culturales, filosóficas, científicas, políticas, literarias… Con ello, se pretende establecer una relectura del primer libro de Venturi y sus años de gestación desde unas nuevas concepciones, más modernas que postmodern(ist)as, proponiendo una posible evolución en la arquitectura más reciente cuyas raíces, a fin de cuentas, tendrían su origen en la Norteamérica de 1946 a 1966. ABSTRACT Complexity and Contradiction in Architecture has proved to be one of the capital, alluded references cited and reproduced in the architectural literature of the recent times. Not surprisingly, in the Introduction to the book, Vincent Scully wrote that "yet it is probably the most important writing on the making of architecture since Le Corbusier´s ‘Vers une Architecture’, of 1923". However, its sources seem to be unexplored or at least not examined. Therefore, Road to 1966 is presented as a research with three fundamental starting objectives: (1) first, the interest in studying the burning architectural debate, created within the arising frictions among the protagonists of the years that changed the status of what was considered a legitimate work in architecture; (2) second, it seeks to extend the chronology of the intellectual background of the book written by Venturi, which marked the second half of the twentieth century, in a retroactive manner to the years of the World War II, when it seems that some new positions from which to approach the issues of practice, theory and history of architecture began to be consistent and recognizable; (3) lastly, to offer a new interpretation of Venturi’s text, now understood not as the primal source of the great transformations of the recent architecture (of the last fifty years), but as the necessary result of that background intellectual chronology. The American architecture of these post-war years has proved to be crucial in its later stages, and especially in relation to the book of Robert Venturi. In fact, Scully in the Introduction to the first edition of Complexity and Contradiction, noted that "the major argument of this book was laid out in the late fifties". The fact that the architecture of the twentieth century –when the leading figure of Venturi was consolidated- has in the North America of the sixties one of its most decisive chapters, (often assumed as the next step to the imported European heroic modernism) today seems to be discussed by almost anyone. Now, what about the intervening years? What happens between the end of the World War II and the sixties? The potential lack of a clear dominant position of this stage may have plunged it into oblivion or oversight by historians and critics. Thus, this research is structured around the role that occupies Venturi’s work, whereas this is not its only subject. Rather taken as an excuse, the thesis deepens deductively in the set of circumstances that could lead its author to the conclusions he developed in 1966, detecting biographical and academic environments, shared thoughts and epistemological and mutual professional influences, that would justify a new interpretation of this book as a necessary corollary of an outlook of crisis and change (this major and center subject in this dissertation), contrary to what has been commonly understood upon this work. The research focuses predominantly on tracing the sources cited by Venturi himself in his book, as well as other texts of wider dissemination and outreach (usually professional journals not exclusively academic, as well as books, catalogs of exhibitions, symposia proceedings...), and not so much in the buildings or unbuilt projects; but also, perhaps, it is focused in the terms in which these works were published, commented or reviewed. Hence an approach conceived sub specie bibliotecae has been adopted, with working methods characterized by their chronological component, and then the analytical-comparative one: in other words, a historiographicaljournalistic method able to relate stories or courses of certain ideas or notions, within a broader general context in its architectural, aesthetic, sociological-generational, cultural, philosophical, scientific, political, literary... sides. This approach intends to establish a re-reading of Venturi’s first book and its years of gestation, from some new understandings, more modern than postmodern(ist), proposing a possible evolution of the latest architecture whose roots, after all, would have their origin in the North America of 1946-1966.

Understanding how to reduce road transport emissions : modelling the impact of eco-driving

Entre los problemas medioambientales más trascendentales para la sociedad, se encuentra el del cambio climático así como el de la calidad del aire en nuestras áreas metropolitanas. El transporte por carretera es uno de los principales causantes, y como tal, las administraciones públicas se enfrentan a estos problemas desde varios ángulos: Cambios a modos de transporte más limpios, nuevas tecnologías y combustibles en los vehículos, gestión de la demanda y el uso de tecnologías de la información y la comunicación (ICT) aplicadas al transporte. En esta tesis doctoral se plantea como primer objetivo el profundizar en la comprensión de cómo ciertas medidas ICT afectan al tráfico, las emisiones y la propia dinámica de los vehículos. El estudio se basa en una campaña de recogida de datos con vehículos flotantes para evaluar los impactos de cuatro medidas concretas: Control de velocidad por tramo, límites variables de velocidad, limitador de velocidad (control de crucero) y conducción eficiente (eco‐driving). Como segundo objetivo, el estudio se centra en la conducción eficiente, ya que es una de las medidas que más ahorros de combustible presenta a nivel individual. Aunque estas reducciones están suficientemente documentadas en la literatura, muy pocos estudios se centran en estudiar el efecto que los conductores eficientes pueden tener en el flujo de tráfico, y cuál sería el impacto si se fuera aumentando el porcentaje de este tipo de conductores. A través de una herramienta de microsimulación de tráfico, se han construido cuatro modelos de vías urbanas que se corresponden con una autopista urbana, una arteria, un colector y una vía local. Gracias a los datos recogidos en la campaña de vehículos flotantes, se ha calibrado el modelo, tanto el escenario base como el ajuste de parámetros de conducción para simular la conducción eficiente. En total se han simulado 72 escenarios, variando el tipo de vía, la demanda de tráfico y el porcentaje de conductores eficientes. A continuación se han calculado las emisiones de CO2 and NOx mediante un modelo de emisiones a nivel microscópico. Los resultados muestran que en escenarios con alto porcentaje de conductores eficientes y altas demandas de tráfico las emisiones aumentan. Esto se debe a que las mayores distancias de seguridad y las aceleraciones y frenadas suaves hacen que aumente la congestión, produciendo así mayores emisiones a nivel global. Climate change and the reduced air quality in our metropolitan areas are two of the main environmental problems that the society is addressing currently. Being road transportation one of the main contributors, public administrations are facing these problems from different points of view: shift to cleaner modes, new fuels and vehicle technologies, demand management and the use of information and communication technologies (ICT) applied to transportation. The first objective of this thesis is to understand how certain ICT measures affect traffic, emissions and vehicle dynamics. The study is based on a data collection campaign with floating vehicles to evaluate the impact of four specific measures: section speed control, variable speed limits, cruise control and eco‐driving. The second objective of the study focuses on eco‐driving, as it is one of the measures that present the largest fuel savings at an individual level. Although these savings are well documented in the literature, few studies focus on how ecodrivers affect the surrounding vehicles and the traffic, and what would be the impact in case of different eco‐drivers percentage. Using a traffic micro‐simulation tool, four models in urban context have been built, corresponding to urban motorway, urban arterial, urban collector and a local street. Both the base‐case and the parameters setting to simulate eco‐driving have been calibrated with the data collected through floating vehicles. In total 72 scenarios were simulated, varying the type of road, traffic demand and the percentage of eco‐drivers. Then, the CO2 and NOx emissions have been estimated through the use of an emission model at microscopic level. The results show that in scenarios with high percentage of co‐drivers and high traffic demand the emissions rise. Higher headways and smooth acceleration and decelerations increase congestion, producing higher emissions globally.

Implementation of road dust resuspension in air quality simulations of particulate matter in Madrid (Spain)

An evaluation of the concentration levels of Particulate Matter (PM) was carried out in Madrid (Spain) by introducing the emissions from road dust resuspension. Road dust resuspension emission factors (EF) for different types of vehicles were calculated from EPA-AP42, a global resuspension factor of 0.097 g veh−1km−1 as described in Amato et al. (2010) and a rain-dependent correction factor. With these resuspension EFs, a simulation at street canyon level was performed with the OSPM model without rainfall. Subsequently, a simulation using the CMAQ model was implemented adding resuspension emissions affected by the rain. These data were compared with monitored data obtained from air quality stations. OSPM model simulations with resuspension EFs but without the effect of rainfall improve the PM estimates in about 20gm−3μ compared to the simulation with default EFs. Total emissions were calculated by adding the emissions estimated with resuspension EFs to the default PM emissions to be used by CMAQ. For the study in the Madrid Area, resuspension emissions are approximately of the same order of magnitude as inventoried emissions. On a monthly scale, rain effects are negligible for resuspension emissions due to the dry weather conditions of Spain. With the exception of April and May, the decrease in resuspension emissions is not >3%. The predicted PM10 concentration increases up to 9μ gm−3 on annual average for each station compared to the same scenario without resuspension. However, in both cases, PM 10 estimates with resuspension are still underestimating observations. It should be noted that although that accounting for resuspension improves the quality of model predictions, other PM sources (e.g., Saharan dust) were not considered in this study.

Safety study of transcranial static magnetic field stimulation (tSMS) of the human cortex

Transcranial static magnetic field stimulation (tSMS) in humans reduces cortical excitability. Objective: The objective of this study was to determine if prolonged tSMS (2 h) could be delivered safely in humans. Safety limits for this technique have not been described. Methods: tSMS was applied for 2 h with a cylindric magnet on the occiput of 17 healthy subjects. We assessed tSMS-related safety aspects at tissue level by measuring levels of neuron-specific enolase (NSE,a marker of neuronal damage) and S100 (a marker of glial reactivity and damage). We also included an evaluation of cognitive side effects by using a battery of visuomotor and cognitive tests. Results: tSMS did not induce any significant increase in NSE or S100. No cognitive alteration was detected. Conclusions: Our data indicate that the application of tSMS is safe in healthy human subjects, at least within these parameters

Educational Needs and Future Prospects in the Field of Health and Safety at Work in Spain

Aiming to identify educational needs to promote employment in the field of Occupational Health and Safety in Spain, this paper analyses the matching degree between the existing university educational offer and the professional demand. Results indicate that the new official Masters are well driven but, at graduate level, a broad range of topics regarding occupational hazards should be promoted and the scope of cross subjects should be expanded. New profiles that are emerging within this field are also identified.

Application of the dynamic models to the detection of imperfections in plate Structures

This paper is part of a set of publications related with the development of mathematical models aimed to simulate the dynamic input and output of experimental nondestructive tests in order to detect structural imperfections. The structures to be considered are composed by steel plates of thin thickness. The imperfections in these cases are cracks and they can penetrate either a significant part of the plate thickness or be micro cracks or superficial imperfections. The first class of cracks is related with structural safety and the second one is more connected to the structural protection to the environment, particularly if protective paintings can be deteriorated. Two mathematical groups of models have been developed. The first group tries to locate the position and extension of the imperfection of the first class of imperfections, i.e. cracks and it is the object of the present paper. Bending Kirchoff thin plate models belong to this first group and they are used to this respect. The another group of models is dealt with membrane structures under the superficial Rayleigh waves excitation. With this group of models the micro cracks detection is intended. In the application of the first group of models to the detection of cracks, it has been observed that the differences between the natural frequencies of the non cracked and the cracked structures are very small. However, geometry and crack position can be identified quite accurately if this comparison is carried out between first derivatives (mode rotations) of the natural modes are used instead. Finally, in relation with the analysis of the superficial crack existence the use of Rayleigh waves is very promising. The geometry and the penetration of the micro crack can be detected very accurately. The mathematical and numerical treatment of the generation of these Rayleigh waves present and a numerical application has been shown.

CLIMA ORGANIZACIONAL E BURNOUT: UM ESTUDO COM SERVIDORES PÚBLICOS FEDERAIS

As condições inadequadas vivenciadas nas organizações afligem não só os trabalhadores da iniciativa privada, pois são igualmente encontradas no segmento estatal, contrariando a expectativa de que o aparato governamental eliminaria as condições insalubres e criaria outras melhores nas quais prevalecesse à promoção de saúde. Diante desse panorama questionou-se porque, uma vez que, pelo menos do ponto de vista da sociedade leiga, esses servidores estão submetidos a condições privilegiadas de trabalho. O presente estudo objetivou identificar e descrever possíveis relações entre o clima organizacional e o burnout em servidores públicos de uma instituição federal de ensino. Objetivou-se ainda descrever o clima organizacional predominante. A pesquisa realizada teve cunho quantitativo, tipo estudo de caso e exploratória. A coleta de dados deu-se por meio das escalas ECO (escala de clima organizacional), ECB (escala de caracterização do burnout) e um questionário sociodemográfico, todos os instrumentos autoaplicáveis eletronicamente disponíveis à instituição. Participaram do estudo 201 servidores públicos federais, com idade média de 37 anos, majoritariamente de nível superior e casados. Os resultados revelaram que cerca de um quarto dos participantes raramente experimentaram burnout, no entanto outra quarta parte deles frequentemente experimentaram altos níveis de burnout, resultado bastante expressivo. Os servidores perceberam clima organizacional mediano, destacando-se a boa coesão entre os colegas de trabalho e a percepção de baixa recompensa. Merece destaque a grande dispersão entre as percepções de clima, o que permite inferir haver subclimas não identificados nesta investigação, possivelmente ocasionados por uma força de clima fraca e pela participação dos servidores de unidades de ensino geograficamente distintas, geridas por gestores locais com relativa autonomia. Os resultados dos cálculos de correlação revelaram que, quanto menos os participantes percebem apoio da chefia e da organização, coesão entre colegas, e mais controle/pressão, mais exaustos se sentem, mais desumanizam as pessoas com quem tratam e mais se decepcionam no trabalho e vice-versa. Conforto físico menor está associado a maior desumanização e a mais decepção no trabalho e vice-versa; e que controle/pressão, relaciona-se positiva e fracamente com desumanização e vice-versa. Desta forma, a hipótese de que existe associação entre burnout e clima organizacional foi confirmada. Os resultados também revelaram que os servidores com burnout, perceberam pior clima organizacional que os seus pares sem burnout, confirmando a segunda hipótese. Esses servidores também se mostraram neutros quanto à percepção de apoio da chefia e conforto físico; não percebem controle pressão, nem recompensa; todavia percebem coesão entre os colegas. Esses resultados sugerem que os participantes têm se apoiado nessas relações para suportar a indiferença e ausência de estímulos experimentados no trabalho. Os resultados obtidos nesse estudo permitiram concluir que o clima organizacional é fraco, provavelmente influenciado por uma cultura organizacional fraca, explicando a heterogeneidade da percepção do clima organizacional pelos servidores. Além disso, embora haja burnout entre poucos participantes, há que se atentar que cerca de um quarto deles, encontra-se acometido desta síndrome e isto poderá contagiar os demais.

Ex vivo evaluation of a Taylor-Couette flow, immobilized heparinase I device for clinical application

Efficient and safe heparin anticoagulation has remained a problem for continuous renal replacement therapies and intermittent hemodialysis for patients with acute renal failure. To make heparin therapy safer for the patient with acute renal failure at high risk of bleeding, we have proposed regional heparinization of the circuit via an immobilized heparinase I filter. This study tested a device based on Taylor-Couette flow and simultaneous separation/reaction for efficacy and safety of heparin removal in a sheep model. Heparinase I was immobilized onto agarose beads via cyanogen bromide activation. The device, referred to as a vortex flow plasmapheretic reactor, consisted of two concentric cylinders, a priming volume of 45 ml, a microporous membrane for plasma separation, and an outer compartment where the immobilized heparinase I was fluidized separately from the blood cells. Manual white cell and platelet counts, hematocrit, total protein, and fibrinogen assays were performed. Heparin levels were indirectly measured via whole-blood recalcification times (WBRTs). The vortex flow plasmapheretic reactor maintained significantly higher heparin levels in the extracorporeal circuit than in the sheep (device inlet WBRTs were 1.5 times the device outlet WBRTs) with no hemolysis. The reactor treatment did not effect any physiologically significant changes in complete blood cell counts, platelets, and protein levels for up to 2 hr of operation. Furthermore, gross necropsy and histopathology did not show any significant abnormalities in the kidney, liver, heart, brain, and spleen.

Análise de consistência de traçado de uma rodovia de múltiplas faixas.

O número de acidentes de trânsito é crescente nas últimas décadas no Brasil. Uma das principais causas de acidentes em rodovias brasileiras é o excesso de velocidade, que contribui para a possibilidade de ocorrência de acidentes. As velocidades praticadas pelos motoristas são também função dos elementos geométricos que compõem a via (raio, rampa, largura da faixa, etc). A consistência de traçado não afeta a expectativa dos motoristas e garante uma operação segura. A maioria dos motoristas consegue perceber as falhas de coordenação, mas tecnicamente, por exemplo, desconhecem a origem das mesmas. Esta pesquisa apresenta como objetivo a análise de consistência de um trecho de uma determinada rodovia do país de múltiplas faixas, com elevado índice de acidentes e alto fluxo de veículos comerciais. Os pontos com maior ocorrência de acidentes foram identificados e realizaram-se medições de velocidade para elaboração de um modelo de previsão de velocidade operacional (V85) do trecho de estudo. De posse deste modelo, procedeu-se à análise de consistência através do método dos critérios de segurança, que identificou 2 seções com problemas de consistência. Por fim, verificou-se se estas seções correspondiam aos locais de maior número de acidentes: a tangente T5 precede uma curva com alto índice de acidentes (km 511+000); o local com maior concentração de acidentes (km 514) foi classificado como RAZOÁVEL.

Transmission and Transport of Energy in the Western U.S. and Canada: A Law and Policy Road Map

This collection of short essays arose from the inaugural meeting of the Idaho Symposium on Energy in the West, which was held in November, 2014. The topic for this first Symposium was Transmission and Transport of Energy in the Western U.S. and Canada: A Law and Policy Road Map. The essays in this collection provide a notable introduction to the major energy issues facing the West today. Topics include: building a resilient legal architecture for western energy production; natural gas flaring; transmission planning for wind energy; utilities and rooftop solar; special considerations for western states and the Clean Power Plan; the Clean Power Plan's implications for the western grid; siting renewable energy on public lands; and implications of utility reform in New York and Hawaii for the Northwest.

Staying in the Delaware Corporate Governance Lane: Fee Shifting Bylaws and a Legislative Reaffirmation of the Rules of the Road

The Delaware legislature has taken steps towards the adoption of amendments to the Delaware General Corporation Law (DGCL) that would prohibit fee shifting provisions in the articles and bylaws. The language in the legislative proposal, however, addresses fee shifting provisions only in the context of "internal corporate claims." Some have raised concerns that this language would allow for fee shifting provisions that applied to other types of actions, including at least some cases brought under the securities laws. This piece suggests that in fact the Delaware General Corporation Law already prohibits the adoption of bylaws and certificate provisions that apply to causes of action unrelated to internal corporate claims. As a result, there was no reason for the Delaware legislature to expressly bar fee shifting provisions in these types of actions.

Application of the Putting Women First protocol in a study on violence against immigrant women in Spain

In this paper, we describe our experience of using the Putting Women First protocol in the design and implementation of a cross-sectional study on violence against women (VAW) among 1607 immigrant women from Morocco, Ecuador and Romania living in Spain in 2011. The Putting Women First protocol is an ethical guideline for VAW research, which includes recommendations to ensure the safety of the women involved in studies on this subject. The response rate in this study was 59.3%. The prevalence of VAW cases last year was 11.7%, of which 15.6% corresponded to Ecuadorian women, 10.9% to Moroccan women and 8.6% to Romanian women. We consider that the most important goal for future research is the use of VAW scales validated in different languages, which would help to overcome the language barriers encountered in this study.