Bulk sediment parameter of three sediment cores from permafrost lowlands, Alaska Arctic Coastal Plain

Arctic lowland landscapes have been modified by thermokarst lake processes throughout the Holocene. Thermokarst lakes form as a result of ice-rich permafrost degradation and they may expand over time through thermal and mechanical shoreline erosion. We studied proximal and distal sedimentary records from a thermokarst lake located on the Arctic Coastal Plain of northern Alaska to reconstruct the impact of catchment dynamics and morphology on the lacustrine depositional environment and to quantify carbon accumulation in thermokarst lake sediments. Short cores were collected for analysis of pollen, sedimentological and geochemical proxies. Radiocarbon and Pb/Cs dating, as well as extrapolation of measured historic lake expansion rates, were applied to estimate a minimum lake age of ~ 1,400 calendar years BP. The pollen record is in agreement with the young lake age as it does not include evidence of the "alder high" that occurred in the region ~ 4.0 cal ka BP. The lake most likely initiated from a remnant pond in a drained thermokarst lake basin (DTLB) and deepened rapidly as evidenced by accumulation of laminated sediments. Increasing oxygenation of the water column as shown by higher Fe/Ti and Fe/S ratios in the sediment indicate shifts in ice regime with increasing water depth. More recently, the sediment source changed as the thermokarst lake expanded through lateral permafrost degradation, alternating from redeposited DTLB sediments, to increased amounts of sediment from eroding, older upland deposits, followed by a more balanced combination of both DTLB and upland sources. The characterizing shifts in sediment sources and depositional regimes in expanding thermokarst lakes were therefore archived in the thermokarst lake sedimentary record. This study also highlights the potential for Arctic lakes to recycle old carbon from thawing permafrost and thermokarst processes.

Eco-innovation – does additional engagement lead to additional rewards?

Purpose: Eco-innovation is any form of product, process or organisational innovation that contributes towards sustainable development. Firms can eco-innovate in a variety of ways. The purpose of this paper is to identify nine different eco-innovation activities – including such items as reducing material use per unit of output, reducing energy use per unit of output, reducing carbon dioxide (CO2) “footprint” – and the authors ask whether these act as substitutes or complements to one another. Design/methodology/approach: Eco-innovation is any form of product, process or organisational innovation that contributes towards sustainable development. Firms can eco-innovate in a variety of ways. In this paper the authors identify nine different eco-innovation activities – including such items as reducing material use per unit of output, reducing energy use per unit of output, reducing CO2 “footprint” – and the authors ask whether these act as substitutes or complements to one another. Findings: Introducing only one eco-innovation activity has little payoff (in terms of turnover per worker) with only those firms who reduce their CO2 “footprint” having higher levels of turnover per worker. When introducing more than one eco-innovation activity the authors find that certain eco-innovation activities complement one another (e.g. reducing material use within the firm at the same time as improving the ability to recycle the product after use) others act as substitutes (e.g. reducing material use within the firm at the same time as recycling waste, water or materials within the firm). Practical implications: The results suggest that firms can maximise their productive capacity by considering specific combinations of eco-innovation. This suggests that firms should plan to introduce eco-innovation which act as complements, thereby, boosting productivity. It also suggests that eco-innovation stimuli, introduced by policy makers, should be targeted at complementary eco-innovations. Originality/value: The paper analyses whether eco-innovations act as complements or substitutes. While a number of studies have analysed the importance of eco-innovation for firm performance, few have assessed the extent to which diverse types of eco-innovation interact with each other to complement or substitute for one another.

Co-production of bio-oil and propylene through the hydrothermal liquefaction of polyhydroxybutyrate producing cyanobacteria

A polyhydroxybutyrate (PHB) producing cyanobacteria was converted through hydrothermal liquefaction (HTL) into propylene and a bio-oil suitable for advanced biofuel production. HTL of model compounds demonstrated that in contrast to proteins and carbohydrates, no synergistic effects were detected when converting PHB in the presence of algae. Subsequently, Synechocystis cf. salina, which had accumulated 7.5wt% PHB was converted via HTL (15% dry weight loading, 340°C). The reaction gave an overall propylene yield of 2.6%, higher than that obtained from the model compounds, in addition to a bio-oil with a low nitrogen content of 4.6%. No propylene was recovered from the alternative non-PHB producing cyanobacterial strains screened, suggesting that PHB is the source of propylene. PHB producing microorganisms could therefore be used as a feedstock for a biorefinery to produce polypropylene and advanced biofuels, with the level of propylene being proportional to the accumulated amount of PHB.

Co-production of bio-oil and propylene through the hydrothermal liquefaction of polyhydroxybutyrate producing cyanobacteria

A polyhydroxybutyrate (PHB) producing cyanobacteria was converted through hydrothermal liquefaction (HTL) into propylene and a bio-oil suitable for advanced biofuel production. HTL of model compounds demonstrated that in contrast to proteins and carbohydrates, no synergistic effects were detected when converting PHB in the presence of algae. Subsequently, Synechocystis cf. salina, which had accumulated 7.5wt% PHB was converted via HTL (15% dry weight loading, 340°C). The reaction gave an overall propylene yield of 2.6%, higher than that obtained from the model compounds, in addition to a bio-oil with a low nitrogen content of 4.6%. No propylene was recovered from the alternative non-PHB producing cyanobacterial strains screened, suggesting that PHB is the source of propylene. PHB producing microorganisms could therefore be used as a feedstock for a biorefinery to produce polypropylene and advanced biofuels, with the level of propylene being proportional to the accumulated amount of PHB.

Assessing hydrothermal liquefaction for the production of bio-oil and enhanced metal recovery from microalgae cultivated on acid mine drainage

The hydrothermal liquefaction(HTL) of algal biomass is a promising route to viable second generation biofuels. In this investigation HTL was assessed for the valorisation of algae used in the remediation of acid mine drainage (AMD). Initially the HTL process was evaluated using Arthrospira platensis (Spirulina) with additional metal sulphates to simulate metal remediation. Optimised conditions were then used to process a natural algal community (predominantly Chlamydomonas sp.) cultivated under two scenarios: high uptake and low uptake of metals from AMD. High metal concentrations appear to catalyse the conversion to bio-oil, and do not significantly affect the heteroatom content or higher heating value of the bio-oil produced. The associated metals were found to partition almost exclusively into the solid residue, favourable for potential metal recovery. High metal loadings also caused partitioning of phosphates from the aqueous phase to the solid phase, potentially compromising attempts to recycle process water as a growth supplement. HTL was therefore found to be a suitable method of processing algae used in AMD remediation, producing a crude oil suitable for upgrading into hydrocarbon fuels, an aqueous and gas stream suitable for supplementing the algal growth and the partitioning of most contaminant metals to the solid residue where they would be readily amenable for recovery and/or disposal.

Assessing hydrothermal liquefaction for the production of bio-oil and enhanced metal recovery from microalgae cultivated on acid mine drainage

The hydrothermal liquefaction(HTL) of algal biomass is a promising route to viable second generation biofuels. In this investigation HTL was assessed for the valorisation of algae used in the remediation of acid mine drainage (AMD). Initially the HTL process was evaluated using Arthrospira platensis (Spirulina) with additional metal sulphates to simulate metal remediation. Optimised conditions were then used to process a natural algal community (predominantly Chlamydomonas sp.) cultivated under two scenarios: high uptake and low uptake of metals from AMD. High metal concentrations appear to catalyse the conversion to bio-oil, and do not significantly affect the heteroatom content or higher heating value of the bio-oil produced. The associated metals were found to partition almost exclusively into the solid residue, favourable for potential metal recovery. High metal loadings also caused partitioning of phosphates from the aqueous phase to the solid phase, potentially compromising attempts to recycle process water as a growth supplement. HTL was therefore found to be a suitable method of processing algae used in AMD remediation, producing a crude oil suitable for upgrading into hydrocarbon fuels, an aqueous and gas stream suitable for supplementing the algal growth and the partitioning of most contaminant metals to the solid residue where they would be readily amenable for recovery and/or disposal.

Morphological characterization of branched PP under stretching

FAPESP:95/56510

Dispositifs optoélectroniques à base de semi-conducteurs organiques en couches minces

Les petites molécules de type p à bandes interdites étroites sont de plus en plus perçues comme des remplaçantes possibles aux polymères semi-conducteurs actuellement utilisés conjointement avec des dérivés de fullerènes de type n, dans les cellules photovoltaïques organiques (OPV). Par contre, ces petites molécules tendent à cristalliser facilement lors de leur application en couches minces et forment difficilement des films homogènes appropriés. Des dispositifs OPV de type hétérojonction de masse ont été réalisés en ajoutant différentes espèces de polymères semi-conducteurs ou isolants, agissant comme matrices permettant de rectifier les inhomogénéités des films actifs et d’augmenter les performances des cellules photovoltaïques. Des polymères aux masses molaires spécifiques ont été synthétisés par réaction de Wittig en contrôlant précisément les ratios molaires des monomères et de la base utilisée. L’effet de la variation des masses molaires en fonction des morphologies de films minces obtenus et des performances des diodes organiques électroluminescentes reliées, a également été étudié. La microscopie électronique en transmission (MET) ou à balayage (MEB) a été employée en complément de la microscopie à force atomique (AFM) pour suivre l’évolution de la morphologie des films organiques minces. Une nouvelle méthode rapide de préparation des films pour l’imagerie MET sur substrats de silicium est également présentée et comparée à d’autres méthodes d’extraction. Motivé par le prix élevé et la rareté des métaux utilisés dans les substrats d’oxyde d’indium dopé à l’étain (ITO), le développement d’une nouvelle méthode de recyclage eco-responsable des substrats utilisés dans ces études est également présenté.

Ultra Thin PCC Overlays, HR-559, Construction Report, 1995

A 11.6 km (7.2 mi.) portion of IA 21 in Iowa County from the junction of US 6 north to the junction of IA 212, was selected for the research project. The project was divided into 65 different test sections of a PCC overlay of an existing asphalt concrete (AC) surface with thicknesses of 50 mm (2 in.), 100 mm (4 in.), 150 mm (6 in.), and 200 mm (8 in.). The joint spacings for these sections were 0.6 m (2 ft.), 1.2 m (4 ft.), 1.8 m (6 ft.), 3.7 m (12 ft.), and 4.6 m (15 ft.). Joints were sealed if the thickness of the pavement was over 100 mm (4 in.), unless specified. Two types of polypropylene fibers, monofilament and fibrillated, were added to the conventional PCC mix for designated sections. Three additional sections consisted of an asphalt overlay for comparison with the concrete overlay. Three different base preparations were used on the project, consisting of: patching and scarifying, patching only, and cold-in-place recycling. Sensors were placed in various test sections to measure the temperature and strain during and after construction of the overlay. Pullout tests were also conducted at various locations. Beams cylinders were made for each of the PCC mixes and tested for flexural and compressive strengths. Evaluation of the performance will be conducted through December 31, 1999.

Optimisation de l’élevage intensif des larves de doré jaune (sander vitreus) dans les systèmes aquacoles en recirculation

Les percidés, dont le doré jaune (Sander vitreus), représentent une opportunité considérable de diversification de l’offre pour l’industrie aquacole au Canada, mais aussi ailleurs dans le monde. Malgré son fort potentiel, les producteurs de dorés sont marginaux, car l’élevage larvaire s’avère difficile et complexe, résultant en des succès de survie variables. Pour un développement durable de l’aquaculture, mais aussi pour assurer un meilleur contrôle des paramètres environnementaux, et conséquemment une meilleure rentabilité, les nouvelles méthodes d’élevage s’orientent vers l’utilisation de systèmes en recirculation où l’eau est majoritairement filtrée et recyclée. Un premier volet de nos travaux réalisés en 2014 a confirmé que (i) les méthodes intensives d’élevage larvaire peuvent être adaptés dans les systèmes en recirculation, que (ii) la moulée commerciale enrichie de farine de krills offre une meilleure croissance qu’une moulée commerciale enrichie aux microalgues, (iii) que des artémies vivantes ne favorise pas l’ingestion alimentaire lorsqu’ils sont ajoutés à des rations d’une moulée commerciale enrichie de farine de krills et (iv) que le développement de la vessie natatoire est le défi principal afin de produire du doré en circuit recyclé de façon rentable. Une étude menée en 2015 visait à favoriser le développement de la vessie natatoire du doré dans les systèmes en recirculation. Quatre traitements ont été comparés soit, un jet d’eau de surface faible, un jet d’eau de surface fort, un microbulleur et un rondin commercial d’absorption d’huile. Nous avons démontré que (i) l’utilisation d’un jet d’eau de surface faible n’était pas suffisant pour favoriser le développement de la vessie natatoire du doré dans les systèmes où l’eau est fortement recirculée et (ii) qu’un rondin d’absorption d’huile est le dispositif le plus efficace pour favoriser le développement de la vessie natatoire du doré. Les prochains travaux devraient se pencher sur (i) l’élaboration de bassins adaptés aux réalités de l’élevage intensif des percidés, (ii) sur des efforts de domestication du doré par sélection génétique afin d’augmenter la survie dans les systèmes en recirculation et sur (iii) des études bioéconomiques afin de réduire les risques associés aux démarrages de nouvelles piscicultures.

Rôle de la protéine DUSP5 dans l’autophagie des cardiomyocytes

Résumé: L’autophagie est un processus essentiel au maintien de l’homéostasie cellulaire. Elle permet de dégrader et recycler aussi bien des organelles entières que des composants cytoplasmiques non fonctionnels. De plus, l’augmentation d’autophagie en condition de stress constitue une réponse adaptative favorisant la survie cellulaire. Chez les cardiomyocytes, l’autophagie en condition basale est indispensable au renouvellement, entre autres, des mitochondries et des protéines formant les sarcomères. De plus, les stress tels l’ischémie cardiaque ou la carence en nutriments induisent une augmentation de l’autophagie protectrice. Dans certaines conditions extrêmes, il a été suggéré qu’un surcroît d’autophagie puisse toutefois exacerber la pathologie cardiaque en provoquant la mort des cardiomyocytes. Considérant l’importance de ce processus dans la physiopathologie cardiaque, l’identification des mécanismes signalétiques régulant l’autophagie chez les cardiomyocytes a été le sujet de recherches intenses. À cet effet, l’activation des Mitogen-Activated Protein Kinase (MAPK) a été démontrée pour réguler, avec d’autres voies signalétiques, l’autophagie et l’apoptose des cardiomyocytes. Il est donc probable que les Dual-Specificity Phosphatase (DUSP), enzymes clés contrôlant l’activité des MAPK, participent aussi à la régulation de l’autophagie. Afin de vérifier cette hypothèse, nous avons induit l’autophagie chez des cardiomyocytes isolés de rats nouveau-nés en culture. L’analyse de marqueurs d’autophagie par immunobuvardage démontre que l’activation des MAPK ERK1/2 et p38 corrèle avec l’activité autophagique chez les cardiomyocytes. Dans ces conditions, la diminution d’expression de la majorité des ARNm encodant les différentes DUSP retrouvées chez les cardiomyocytes contraste de façon marquée avec l’augmentation d’expression de l’ARNm Dusp5. De plus, nous avons démontré par une étude de gain de fonction que l’activation soutenue de p38 par surexpression d’un mutant MKK6 constitutivement actif stimule l’autophagie chez les cardiomyocytes. De façon surprenante, la perte de fonction de p38 obtenue par surexpression d’un mutant p38 dominant négatif n’altère en rien la réponse autophagique initiatrice dans notre modèle in vitro. Nos résultats suggèrent que les DUSP puissent réguler, via leurs actions sur les MAPK, d’importantes étapes du processus autophagique chez les cardiomyocytes.

Dimensionamento de um edifício destinado a centro de dia para idosos e creche

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Estruturas

Solar magnetic carpet I: simulation of synthetic magnetograms

This paper describes a new 2D model for the photospheric evolution of the magnetic carpet. It is the first in a series of papers working towards constructing a realistic 3D non-potential model for the interaction of small-scale solar magnetic fields. In the model, the basic evolution of the magnetic elements is governed by a supergranular flow profile. In addition, magnetic elements may evolve through the processes of emergence, cancellation, coalescence and fragmentation. Model parameters for the emergence of bipoles are based upon the results of observational studies. Using this model, several simulations are considered, where the range of flux with which bipoles may emerge is varied. In all cases the model quickly reaches a steady state where the rates of emergence and cancellation balance. Analysis of the resulting magnetic field shows that we reproduce observed quantities such as the flux distribution, mean field, cancellation rates, photospheric recycle time and a magnetic network. As expected, the simulation matches observations more closely when a larger, and consequently more realistic, range of emerging flux values is allowed (4×1016 - 1019 Mx). The model best reproduces the current observed properties of the magnetic carpet when we take the minimum absolute flux for emerging bipoles to be 4×1016 Mx. In future, this 2D model will be used as an evolving photospheric boundary condition for 3D non-potential modeling.

Modified patch repair of femoral hernia after inguinal herniorrhaphy

Background and aim. It has been reported that femoral hernias are rather common after a previous repair of inguinal hernia. We herein present a modified patch repair technique for large femoral hernias that develop after a Lichtenstein operation for ipsilateral inguinal hernia. Patients and methods. The modified technique for femoral hernia was applied to three patients who had a Lichtenstein repair for inguinal hernia. All patients were male. Hernia sac is dissected completely and sent back into to the preperitoneal space. Special attention should be given to the prevascular component of the sac. It is dissected as deep as possible into the preperitoneal space over the femoral vein. The defect is quite wide in this particular type of femoral hernia following Lichtenstein repair. A prosthetic patch that matches the defect is prepared. The medial edge of the mesh is configured to correspond to the pubic corner and lacunar ligament. The lateral margin of the patch is cut to create several petals for inverting the mesh above and medial to the femoral vein to prevent prevascular herniation. The mesh is secured to inguinal ligament, ilioinguinal tract, lacunar ligament, and Cooper ligament. Few sutures are put on the pubic corner and lacunar ligament. Results. One patient was discharged after two hours, other two stayed overnight. Readmission because of seroma development was recorded in two cases where standard polypropylene meshes were used. No complication was observed in the other patient who received lightweight meshes. No early recurrences were recorded after 4, 9, and 30 months. Conclusion. Femoral recurrence after previous inguinal hernia repair seems to be a specific entity. It has a prevascular component and the hernia defect can be much larger than that of a primary femoral hernia. A patch repair with infra-inguinal approach can be a valuable alternative with low complication rate.