Phase diagram and spectral properties of a new exactly integrable spin-1 quantum chain

The spectral properties and phase diagram of the exactly integrable spin-1 quantum chain introduced by Alcaraz and Bariev are presented. The model has a U(1) symmetry and its integrability is associated with an unknown R-matrix whose dependence on the spectral parameters is not of a different form. The associated Bethe ansatz equations that fix the eigenspectra are distinct from those associated with other known integrable spin models. The model has a free parameter t(p). We show that at the special point t(p) = 1, the model acquires an extra U(1) symmetry and reduces to the deformed SU(3) Perk-Schultz model at a special value of its anisotropy q = exp(i2 pi/3) and in the presence of an external magnetic field. Our analysis is carried out either by solving the associated Bethe ansatz equations or by direct diagonalization of the quantum Hamiltonian for small lattice sizes. The phase diagram is calculated by exploring the consequences of conformal invariance on the finite-size corrections of the Hamiltonian eigenspectrum. The model exhibits a critical phase ruled by the c = 1 conformal field theory separated from a massive phase by first-order phase transitions.

WRITING ELECTRONIC FERROMAGNETIC STATES IN A HIGH-TEMPERATURE PARAMAGNETIC NUCLEAR SPIN SYSTEM

In this paper, we use Nuclear Magnetic Resonance (NMR) to write electronic states of a ferromagnetic system into high-temperature paramagnetic nuclear spins. Through the control of phase and duration of radio frequency pulses, we set the NMR density matrix populations, and apply the technique of quantum state tomography to experimentally obtain the matrix elements of the system, from which we calculate the temperature dependence of magnetization for different magnetic fields. The effects of the variation of temperature and magnetic field over the populations can be mapped in the angles of spin rotations, carried out by the RF pulses. The experimental results are compared to the Brillouin functions of ferromagnetic ordered systems in the mean field approximation for two cases: the mean field is given by (i) B = B(0) + lambda M and (ii) B = B(0) + lambda M + lambda`M(3), where B(0) is the external magnetic field, and lambda, lambda` are mean field parameters. The first case exhibits second order transition, whereas the second case has first order transition with temperature hysteresis. The NMR simulations are in good agreement with the magnetic predictions.

NUCLEAR SPIN 3/2 ELECTRIC QUADRUPOLE RELAXATION AS A QUANTUM COMPUTATION PROCESS

In this work we applied a quantum circuit treatment to describe the nuclear spin relaxation. From the Redfield theory, we obtain a description of the quadrupolar relaxation as a computational process in a spin 3/2 system, through a model in which the environment is comprised by five qubits and three different quantum noise channels. The interaction between the environment and the spin 3/2 nuclei is described by a quantum circuit fully compatible with the Redfield theory of relaxation. Theoretical predictions are compared to experimental data, a short review of quantum channels and relaxation in NMR qubits is also present.

The low-lying electronic states of BeP: a reliable and accurate quantum mechanical prediction

A very high level of theoretical treatment (complete active space self-consistent field CASSCF/MRCI/aug-cc-pV5Z) was used to characterize the spectroscopic properties of a manifold of quartet and doublet states of the species BeP, as yet experimentally unknown. Potential energy curves for 11 electronic states were obtained, as well as the associated vibrational energy levels, and a whole set of spectroscopic constants. Dipole moment functions and vibrationally averaged dipole moments were also evaluated. Similarities and differences between BeN and BeP were analysed along with the isovalent SiB species. The molecule BeP has a X (4)Sigma(-) ground state, with an equilibrium bond distance of 2.073 angstrom, and a harmonic frequency of 516.2 cm(-1); it is followed closely by the states (2)Pi (R(e) = 2.081 angstrom, omega(e) = 639.6 cm(-1)) and (2)Sigma(-) (R(e) = 2.074 angstrom, omega(e) = 536.5 cm(-1)), at 502 and 1976 cm(-1), respectively. The other quartets investigated, A (4)Pi (R(e) = 1.991 angstrom, omega(e) = 555.3 cm(-1)) and B (4)Sigma(-) (R(e) = 2.758 angstrom, omega(e) = 292.2 cm(-1)) lie at 13 291 and 24 394 cm(-1), respectively. The remaining doublets ((2)Delta, (2)Sigma(+)(2) and (2)Pi(3)) all fall below 28 000 cm(-1). Avoided crossings between the (2)Sigma(+) states and between the (2)Pi states add an extra complexity to this manifold of states.

Open Issues in Control ofAutomotive R744 Air-ConditioningSystems

In this thesis, one of the current control algorithms for the R744 cycle, which tries tooptimize the performance of the system by two SISO control loops, is compared to acost-effective system with just one actuator. The operation of a key component of thissystem, a two stage orifice expansion valve is examined in a range of typical climateconditions. One alternative control loop for this system, which has been proposed byBehr group, is also scrutinized.The simulation results affirm the preference of using two control-loops instead of oneloop, but refute advantages of the Behr alternate control approach against one-loopcontrol. As far as the economic considerations of the A/C unit are concerned, usinga two-stage orifice expansion valve is desired by the automotive industry, thus basedon the experiment results, an improved logic for control of this system is proposed.In the second part, it is investigated whether the one-actuator control approach isapplicable to a system consisting of two parallel evaporators to allow passengers tocontrol different climate zones. The simulation results show that in the case of usinga two-stage orifice valve for the front evaporator and a fixed expansion valve forthe rear one, a proper distribution of the cooling power between the front and rearcompartment is possible for a broad range of climate conditions.

Real-Time Recognition System for Traffic Signs

The aim of this thesis project is to develop the Traffic Sign Recognition algorithm for real time. Inreal time environment, vehicles move at high speed on roads. For the vehicle intelligent system itbecomes essential to detect, process and recognize the traffic sign which is coming in front ofvehicle with high relative velocity, at the right time, so that the driver would be able to pro-actsimultaneously on instructions given in the Traffic Sign. The system assists drivers about trafficsigns they did not recognize before passing them. With the Traffic Sign Recognition system, thevehicle becomes aware of the traffic environment and reacts according to the situation.The objective of the project is to develop a system which can recognize the traffic signs in real time.The three target parameters are the system’s response time in real-time video streaming, the trafficsign recognition speed in still images and the recognition accuracy. The system consists of threeprocesses; the traffic sign detection, the traffic sign recognition and the traffic sign tracking. Thedetection process uses physical properties of traffic signs based on a priori knowledge to detect roadsigns. It generates the road sign image as the input to the recognition process. The recognitionprocess is implemented using the Pattern Matching algorithm. The system was first tested onstationary images where it showed on average 97% accuracy with the average processing time of0.15 seconds for traffic sign recognition. This procedure was then applied to the real time videostreaming. Finally the tracking of traffic signs was developed using Blob tracking which showed theaverage recognition accuracy to 95% in real time and improved the system’s average response timeto 0.04 seconds. This project has been implemented in C-language using the Open Computer VisionLibrary.

Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

Effects of a quantum measurement on the electric conductivity : Application to graphene

We generalize the standard linear-response (Kubo) theory to obtain the conductivity of a system that is subject to a quantum measurement of the current. Our approach can be used to specifically elucidate how back-action inherent to quantum measurements affects electronic transport. To illustrate the utility of our general formalism, we calculate the frequency-dependent conductivity of graphene and discuss the effect of measurement-induced decoherence on its value in the dc limit. We are able to resolve an ambiguity related to the parametric dependence of the minimal conductivity.

Is availability of public open space equitable across areas?

This study examined whether availability of public open spaces that can be used for recreation varies according to neighbourhood socio-economic disadvantage. Density and area of public open spaces were examined using a geographic information system and postal boundaries were used to define neighbourhoods. Neighbourhood socio-economic status (SES) was stratified into quintiles. Once neighbourhood population and geographic area were considered there were no differences in the number or total area of free-access, restricted access or sporting/recreation open spaces across quintiles of neighbourhood SES. Future research should examine whether the quality of public open spaces differ by neighbourhood SES.

Extracting Causal Graphs from an Open Provenance Data Model

The open provenance architecture (OPA) approach to the challenge was distinct in several regards. In particular, it is based on an open, well-defined data model and architecture, allowing different components of the challenge workflow to independently record documentation, and for the workflow to be executed in any environment. Another noticeable feature is that we distinguish between the data recorded about what has occurred, emphprocess documentation, and the emphprovenance of a data item, which is all that caused the data item to be as it is and is obtained as the result of a query over process documentation. This distinction allows us to tailor the system to separately best address the requirements of recording and querying documentation. Other notable features include the explicit recording of causal relationships between both events and data items, an interaction-based world model, intensional definition of data items in queries rather than relying on explicit naming mechanisms, and emphstyling of documentation to support non-functional application requirements such as reducing storage costs or ensuring privacy of data. In this paper we describe how each of these features aid us in answering the challenge provenance queries.

A case for an international consortium on system-of-systems engineering

A system-of-systems (SoS) conceptualization is essential in resolving issues involving heterogeneous independently operable systems to achieve a unique purpose. Successful operation as an SoS requires communication among appropriate individuals and groups across enterprises through an effective protocol. This paper presents a position on the creation of a consortium of concerned system engineers and scientists worldwide to examine the problems and solutions strategies associated with SoS. The consortium could lead efforts in clarifying ambiguities and in seeking remedies to numerous open questions with respect to SoS analysis, SoS engineering (SoSE), as well as differences between systems engineering (SE) and SoSE. The mission of this consortium is envisioned to: 1) act as a neutral party; 2) provide a forum to put forth Calls to Action; and 3) establish a community of interest to recommend a set of solutions.

The Pollination Biology and Mating System of a Peripheral Population of Witheringia solanacea (Solanaceae)

Pollinator visitation rates over the life of a flower are determined by pollinator abundance and floral longevity. If flowers are not visited frequently enough, pollen limitation may occur, favoring the evolution of self-compatibility (SC). In plant species with varying SC levels, central populations often are self-incompatible (SI) and peripheral populations are SC. Witheringia solanacea (Solanaceae) is a species that follows this trend with the exception of one population in the Monteverde Cloud Forest Reserve, which is peripheral yet SI. I investigated this population using multiple techniques including floral bagging, pollinator observations, microsatellite analysis, and floral longevity manipulations. My results confirmed the self-incompatibility of the Monteverde population and indicated low but perhaps adequate rates of pollinator visitation per flower per hour. I found reduced genetic diversity at Monteverde and gene flow occurring unidirectionally from San Luis (a central population) to Monteverde. In the greenhouse, there was more of an effect of male than female function on floral longevity, but the largest differences were environmental. Flowers stayed open substantially longer when cool, cloudy weather was simulated and shorter when conditions were hot and sunny. The results indicate that the Monteverde population of W. solanacea is SI because 1) it is unable to maximize its fitness due to gene flow from San Luis and its relatively recent colonization of the area and 2) pollen limitation may not be severe because of supplemental pollinator availability from other Witheringia species in the area and increased floral longevities due to cool and cloudy conditions.

An agent-based intelligent system for information gathering from world wide web environment

To use the vast amount of information efficiently and effectively from Web sites is very important for making informed decisions. There are, however, still many problems that need to be overcome in the information gathering research arena to enable the delivery of relevant information required by users. In this paper, an information gathering system is develop by means of multiple agents to solve those problems. We employed some ideas of Gaia's methodology and an open agent architecture to analyze and design the system. The system consists of a query preprocessing agent, information retrieval agent, information filtering agent, and information management agent. The filtering agent is trained with categorized documents and can provide users with the necessary information. The experimental results show that all agents in the system can work cooperatively to retrieve relevant information from the World Wide Web environment.

Features of public open spaces and physical activity among children : findings from the CLAN study

Objective : To examine associations between features of public open spaces, and children's physical activity.
Participants : 163 children aged 8–9 years and 334 adolescents aged 13–15 years from Melbourne, Australia participated in 2004.
Methods : A Geographic Information System was used to identify all public open spaces (POS) within 800 m of participants' homes and their closest POS. The features of all POS identified were audited in 2004/5. Accelerometers measured moderate-to-vigorous physical activity (MVPA) after school and on weekends. Linear regression analyses examined associations between features of the closest POS and participants' MVPA.
Results : Most participants had a POS within 800 m of their home. The presence of playgrounds was positively associated with younger boys' weekend MVPA (B = 24.9 min/day; p ≤ 0.05), and lighting along paths was inversely associated with weekend MVPA (B = − 54.9 min/day; p ≤ 0.05). The number of recreational facilities was inversely associated with younger girls' MVPA after school (B = − 2.6 min/day; p ≤ 0.05) and on the weekend (B = − 8.7 min/day; p ≤ 0.05). The presence of trees providing shade (5.8 min/day, p ≤ 0.01) and signage regarding dogs (B = 6.8 min/day, p ≤ 0.05) were positively associated with adolescent girls' MVPA after school.
Conclusion : Certain features of POS were associated with participants' MVPA, although mixed associations were evident. Further research is required to clarify these complex relationships.

Do features of public open spaces vary according to neighbourhood socio-economic status?

This study examined the relations between neighbourhood socio-economic status and features of public open spaces (POS) hypothesised to influence children's physical activity. Data were from the first follow-up of the Children Living in Active Neighbourhoods (CLAN) Study, which involved 540 families of 5–6 and 10–12-year-old children in Melbourne, Australia. The Socio-Economic Index for Areas Index (SEIFA) of Relative Socio-economic Advantage/Disadvantage was used to assign a socioeconomic index score to each child's neighbourhood, based on postcode. Participant addresses were geocoded using a Geographic Information System. The Open Space 2002 spatial data set was used to identify all POS within an 800 m radius of each participant's home. The features of each of these POS (1497) were audited. Variability of POS features was examined across quintiles of neighbourhood SEIFA. Compared with POS in lower socioeconomic neighbourhoods, POS in the highest socioeconomic neighbourhoods had more amenities (e.g. picnic tables and drink fountains) and were more likely to have trees that provided shade, a water feature (e.g. pond, creek), walking and cycling paths, lighting, signage regarding dog access and signage restricting other activities. There were no differences across neighbourhoods in the number of playgrounds or the number of recreation facilities (e.g. number of sports catered for on courts and ovals, the presence of other facilities such as athletics tracks, skateboarding facility and swimming pool). This study suggests that POS in high socioeconomic neighbourhoods possess more features that are likely to promote physical activity amongst children.