Zn electrochemistry in 1-Ethyl-3-Methylimidazolium and N-Butyl-N-Methylpyrrolidinium Dicyanamides: promising new rechargeable Zn battery electrolytes

 We have studied both 1-ethyl-3-methylimidazolium (C2mim) and N-butyl-N-methylpyrrolidinium (C4mpyr) dicyanamide (dca) ionic liquids (ILs) containing 3 wt % H2O and 9 mol % Zn(dca)2 salt for their ability to support Zn0/2+ electrochemistry in the context of a rechargeable Zn battery. Despite the similarities of the two IL electrolyte systems [identical H2O and Zn(dca)2 contents], the system based on [C2mim] supported much higher current densities for Zn electrochemistry at greatly reduced overpotentials [−0.23 V vs. Zn pseudo-reference, 32 mA cm−2 (red) and 61 mA cm−2 (ox)] compared to the [C4mpyr]-based electrolyte [−0.84 V vs. Zn pseudo-reference, 8 mA cm−2 (red) and 15 mA cm−2 (ox)]. The overpotential for Zn deposition is reduced by 0.13 V on Zn metal surfaces compared to glassy carbon (GC), regardless of the electrolyte used. The morphologies of the Zn deposits on both GC and Zn surfaces were also studied. The Zn surfaces promote a deposition that displays a smooth morphology, resulting from an instantaneous nucleation mechanism demonstrated by chronoamperometric experiments. Finally, both [C2mim] and [C4mpyr] electrolytes were tested in symmetrical Zn|Zn cells, where it was determined that the [C2mim] system could sustain over 90 cycles at 0.1 mA cm−2, whereas the [C4mpyr] based system could only achieve 15 cycles at the more modest current density of 0.05 mA cm−2.

An organic ionic plastic crystal electrolyte for rate capability and stability of ambient temperature lithium batteries

Reliable, safe and high performance solid electrolytes are a critical step in the advancement of high energy density secondary batteries. In the present work we demonstrate a novel solid electrolyte based on the organic ionic plastic crystal (OIPC) triisobutyl(methyl)phosphonium bis(fluorosulfonyl)imide (P1444FSI). With the addition of 4 mol% LiFSI, the OIPC shows a high conductivity of 0.26 mS cm-1 at 22 °C. The ion transport mechanisms have been rationalized by compiling thermal phase behaviour and crystal structure information obtained by variable temperature synchrotron X-ray diffraction. With a large electrochemical window (ca. 6 V) and importantly, the formation of a stable and highly conductive solid electrolyte interphase (SEI), we were able to cycle lithium cells (LiLiFePO4) at 30 °C and 20 °C at rates of up to 1 C with good capacity retention. At the 0.1 C rate, about 160 mA h g-1 discharge capacity was achieved at 20 °C, which is the highest for OIPC based cells to date. It is anticipated that these small phosphonium cation and [FSI] anion based OIPCs will show increasing significance in the field of solid electrolytes.

Exploring zinc coordination in novel zinc battery electrolytes

The coordination of zinc ions by tetraglyme has been investigated here to support the development of novel electrolytes for rechargeable zinc batteries. Zn(2+) reduction is electrochemically reversible from tetraglyme. The spectroscopic data, molar conductivity and thermal behavior as a function of zinc composition, between mole ratios [80 : 20] and [50 : 50] [tetraglyme : zinc chloride], all suggest that strong interactions take place between chloro-zinc complexes and tetraglyme. Varying the concentration of zinc chloride produces a range of zinc-chloro species (ZnClx)(2-x) in solution, which hinder full interaction between the zinc ion and tetraglyme. Both the [70 : 30] and [50 : 50] mixtures are promising electrolyte candidates for reversible zinc batteries, such as the zinc-air device.

Enhanced thermo-electrochemical power using carbon nanotube additives in ionic liquid redox electrolytes

Waste heat recovery with thermo-electrochemical cells is limited by their low power and conversion efficiencies. Here we explore ionic liquid electrolytes mixed with multiwall carbon nanotubes (MWCNTs) as alternative electrolytes for thermo-electrochemical cells. The results show that, upon addition of MWCNTs, the combination of interfacial polarization and ion pair dissociation reduces mass transfer resistances and enhances the power of thermo-electrochemical cells at low weight percentage of MWCNTs by up to 30%. This occurs in spite of reduced open circuit voltage due to percolated networks.

New opportunities for quantitative and time efficient 3D MRI of liquid and solid electrochemical cell components: Sectoral Fast Spin Echo and SPRITE.

The ability to image electrochemical processes in situ using nuclear magnetic resonance imaging (MRI) offers exciting possibilities for understanding and optimizing materials in batteries, fuel cells and supercapacitors. In these applications, however, the quality of the MRI measurement is inherently limited by the presence of conductive elements in the cell or device. To overcome related difficulties, optimal methodologies have to be employed. We show that time-efficient three dimensional (3D) imaging of liquid and solid lithium battery components can be performed by Sectoral Fast Spin Echo and Single Point Imaging with T1 Enhancement (SPRITE), respectively. The former method is based on the generalized phase encoding concept employed in clinical MRI, which we have adapted and optimized for materials science and electrochemistry applications. Hard radio frequency pulses, short echo spacing and centrically ordered sectoral phase encoding ensure accurate and time-efficient full volume imaging. Mapping of density, diffusivity and relaxation time constants in metal-containing liquid electrolytes is demonstrated. 1, 2 and 3D SPRITE approaches show strong potential for rapid high resolution (7)Li MRI of lithium electrode components.

Nonlinear dynamic modeling of ionic polymer conductive network composite actuators using rigid finite element method

Ionic polymer conductive network composite (IPCNC) actuators are a class of electroactive polymer composites that exhibit some interesting electromechanical characteristics such as low voltage actuation, large displacements, and benefit from low density and elastic modulus. Thus, these emerging materials have potential applications in biomimetic and biomedical devices. Whereas significant efforts have been directed toward the development of IPMC actuators, the establishment of a proper mathematical model that could effectively predict the actuators' dynamic behavior is still a key challenge. This paper presents development of an effective modeling strategy for dynamic analysis of IPCNC actuators undergoing large bending deformations. The proposed model is composed of two parts, namely electrical and mechanical dynamic models. The electrical model describes the actuator as a resistive-capacitive (RC) transmission line, whereas the mechanical model describes the actuator as a system of rigid links connected by spring-damping elements. The proposed modeling approach is validated by experimental data, and the results are discussed. © 2014 Elsevier B.V. All rights reserved.

Effect of zwitterions on electrochemical properties of oligoether-based electrolytes

Solid polymer electrolytes show great potential in electrochemical devices. Poly(ethylene oxide) (PEO) has been studied as a matrix for solid polymer electrolytes because it has relatively high ionic conductivity. In order to investigate the effect of zwitterions on the electrochemical properties of poly(ethylene glycol) dimethyl ether (G5)/lithium bis(fluorosulfonyl) amide (LiFSA) electrolytes, a liquid zwitterion (ImZ2) was added to the G5-based electrolytes. In this study, G5, which is a small oligomer, was used as a model compound for PEO matrices. The thermal properties, ionic conductivity, and electrochemical stability of the electrolytes with ImZ2 were evaluated. The thermal stabilities of all the G5-based electrolytes with ImZ2 were above 150 °C, and the ionic conductivity values were in the range of 0.8–3.0 mS cm−1 at room temperature. When the electrolytes contained less than 5.5 wt% ImZ2, the ionic conductivity values were almost the same as that of the electrolyte without ImZ2. The electrochemical properties were improved with the incorporation of ImZ2. The anodic limit of the electrolyte with 5.5 wt% ImZ2 was 5.3 V vs. Li/Li+, which was over 1 V higher than that of G5/LiFSA.

Probing ion exchange in the triflic acid-guanidinium triflate system: a solid-state nuclear magnetic resonance study

Knowledge of ion exchange and transport behavior in electrolyte materials is crucial for designing and developing novel electrolytes for electrochemical device applications such as fuel cells or batteries. In the present study, we show that, upon the addition of triflic acid (HTf) to the guanidinium triflate (GTf) solid-state matrix, several orders of magnitude enhancement in the proton conductivity can be achieved. The static 1H and 19F solid-state NMR results show that the addition of HTf has no apparent effect on local molecular mobility of the GTf matrix at room temperature. At higher temperatures, however, the HTf exhibits fast ion exchange with the GTf matrix. The exchange rate, as quantified by our continuum T2 fitting analysis, increases with increasing temperature. The activation energy for the chemical exchange process was estimated to be 58.4 kJ/mol. It is anticipated that the solid-state NMR techniques used in this study may be also applied to other organic solid-state electrolyte systems to investigate their ion-exchange processes.

Fabrication of conductive elastic nanocomposites via framing intact interconnected graphene networks

Electrically conductive elastic nanocomposites with well-organized graphene architectures offer significant improvement in various properties. However, achieving desirable graphene architectures in cross-linked rubber is challenging due to high viscosity and cross-linked nature of rubber matrices. Here, three dimensional (3D) interconnected graphene networks in natural rubber (NR) matrix are framed with self-assembly integrating latex compounding technology by employing electrostatic adsorption between poly(diallyldimethylammonium chloride) modified graphene (positively charged) and NR latex particles (negatively charged) as the driving force. The 3D graphene structure endows the resulted nanocomposites with excellent electrical conductivity of 7.31. S/m with a graphene content of 4.16. vol.%, extremely low percolation threshold of 0.21. vol.% and also analogous reinforcement in mechanical properties. The developed strategy will provide a practical approach for developing elastic nanocomposites with multi-functional properties. © 2014 Elsevier Ltd.

Electrically conductive graphene-filled polymer composites with well organized three-dimensional microstructure

Electrically conductive graphene-filled polystyrene nanocomposites with well-organized three dimensional (3D) microstructures were simply prepared by electrostatic assembly integrated latex technology. First, positively charged polystyrene was synthesized via disperse polymerization in ethanol/water medium by using a cationic co-monomer, and then directly co-assembled with graphene oxide. Eventually, a honeycomb-like graphene 3D framework was embedded in polystyrene matrix after in situ chemical reduction and hot compression molding. Due to the 3D conductive pathway derived from graphene based network evidenced by morphology studies, the fabricated nanocomposites show excellent electrical properties, i.e. extremely low percolation threshold of 0.09 vol% and high saturated conductivity of 25.2 S/m at GNs content of 1.22 vol%. © 2014 Elsevier B.V.

Electrochemical and physicochemical properties of small phosphonium cation ionic liquid electrolytes with high lithium salt content

Electrolytes of a room temperature ionic liquid (RTIL), trimethyl(isobutyl)phosphonium (P111i4) bis(fluorosulfonyl)imide (FSI) with a wide range of lithium bis(fluorosulfonyl)imide (LiFSI) salt concentrations (up to 3.8 mol kg−1 of salt in the RTIL) were characterised using a combination of techniques including viscosity, conductivity, differential scanning calorimetry (DSC), electrochemical impedance spectroscopy (EIS), nuclear magnetic resonance (NMR) and cyclic voltammetry (CV). We show that the FSI-based electrolyte containing a high salt concentration (e.g. 1:1 salt to IL molar ratio, equivalent to 3.2 mol kg−1 of LiFSI) displays unusual transport behavior with respect to lithium ion mobility and promising electrochemical behavior, despite an increase in viscosity. These electrolytes could compete with the more traditionally studied nitrogen-based ionic liquids (ILs) in lithium battery applications.