Semantic Modelling for Product Line Engineering

The aim of our work is to present solutions and a methodical support for automated techniques and procedures in domain engineering, in particular for variability modeling. Our approach is based upon Semantic Modeling concepts, for which semantic description, representation patterns and inference mechanisms are defined. Thus, model-driven techniques enriched with semantics will allow flexibility and variability in representation means, reasoning power and the required analysis depth for the identification, interpretation and adaptation of artifact properties and qualities.

Power conversion and signal transmission integration method based on dual modulation of DC-DC converters

For the development of communication systems such as Internet of Things, integrating communication with power supplies is an attractive solution to reduce supply cost. This paper presents a novel method of power/signal dual modulation (PSDM), by which signal transmission is integrated with power conversion. This method takes advantage of the intrinsic ripple initiated in switch mode power supplies as signal carriers, by which cost-effective communications can be realized. The principles of PSDM are discussed, and two basic dual modulation methods (specifically PWM/FSK and PWM/PSK) are concluded. The key points of designing a PWM/FSK system, including topology selection, carrier shape, and carrier frequency, are discussed to provide theoretical guidelines. A practical signal modulation-demodulation method is given, and a prototype system provides experimental results to verify the effectiveness of the proposed solution.

Power tapping function in near infra-red region based on 45° tilted fiber gratings

We report an efficient power tapping device working in near infra-red (800 nm) wavelength region based on UV-in- scribed 45° tilted fiber grating (45°-TFG) structure. Five 45°-TFGs were UV-inscribed in hydrogenated PS750 fiber using a custom-designed phase mask with different grating lengths of 3 mm, 5 mm, 9 mm, 12 mm and 15 mm, showing polarization dependent losses (PDLs) of 1 dB, 3 dB, 7 dB, 10 dB and 13 dB, respectively. The power side-tapping efficiency is clearly depending on the grating strength. It has been identified that the power tapping efficiency increases with the grating strength and deceases along the grating length. The side-tapped power profile has also been examined in azimuthal direction, showing a near-Gaussian distribution. These experimental results clearly demonstrated that 45°- TFGs may be used as in-fiber power tapping devices for applications requiring in-line signal monitoring.

Broadly tunable high-power random fibre laser

As shown recently, a long telecommunication fibre may be treated as a natural one-dimensional random system, where lasing is possible due to a combination of random distributed feedback via Rayleigh scattering by natural refractive index inhomogeneities and distributed amplification through the Raman effect. Here we present a new type of a random fibre laser with a narrow (∼1 nm) spectrum tunable over a broad wavelength range (1535-1570 nm) with a uniquely flat (∼0.1 dB) and high (>2 W) output power and prominent (>40 %) differential efficiency, which outperforms traditional fibre lasers of the same category, e.g. a conventional Raman laser with a linear cavity formed in the same fibre by adding point reflectors. Analytical model is proposed that explains quantitatively the higher efficiency and the flatter tuning curve of the random fiber laser compared to conventional one. The other important features of the random fibre laser like "modeless" spectrum of specific shape and corresponding intensity fluctuations as well as the techniques of controlling its output characteristics are discussed. Outstanding characteristics defined by new underlying physics and the simplicity of the scheme implemented in standard telecom fibre make the demonstrated tunable random fibre laser a very attractive light source both for fundamental science and practical applications such as optical communication, sensing and secure transmission. © 2012 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

Nonlinear communication channels with capacity above the linear Shannon limit

We prove that, under certain conditions, the capacity of an optical communication channel with in-line, nonlinear filtering (regeneration) elements can be higher than the Shannon capacity for the corresponding linear Gaussian white noise channel. © 2012 Optical Society of America.

CEO power, government monitoring, and bank dividends

We investigate the role of CEO power and government monitoring on bank dividend policy for a sample of 109 European listed banks for the period 2005-2013. We employ three main proxies for CEO power: CEO ownership, CEO tenure, and unforced CEO turnover. We show that CEO power has a negative impact on dividend payout ratios and on performance, suggesting that entrenched CEOs do not have the incentive to increase payout ratios to discourage monitoring from minority shareholders. Stronger internal monitoring by board of directors, as proxied by larger ownership stakes of the board members, increases performance but decreases payout ratios. These findings are contrary to those from the entrenchment literature for non-financial firms. Government ownership and the presence of a government official on the board of directors of the bank, also reduces payout ratios, in line with the view that government is incentivized to favor the interest of bank creditors before the interest of minority shareholders. These results show that government regulators are mainly concerned about bank safety and this allows powerful CEOs to distribute low payouts at the expense of minority shareholders.

Direction Finding Estimators of Cyclostationary Signals in Array Processing for Microwave Power Transmission

A solar power satellite is paid attention to as a clean, inexhaustible large- scale base-load power supply. The following technology related to beam control is used: A pilot signal is sent from the power receiving site and after direction of arrival estimation the beam is directed back to the earth by same direction. A novel direction-finding algorithm based on linear prediction technique for exploiting cyclostationary statistical information (spatial and temporal) is explored. Many modulated communication signals exhibit a cyclostationarity (or periodic correlation) property, corresponding to the underlying periodicity arising from carrier frequencies or baud rates. The problem was solved by using both cyclic second-order statistics and cyclic higher-order statistics. By evaluating the corresponding cyclic statistics of the received data at certain cycle frequencies, we can extract the cyclic correlations of only signals with the same cycle frequency and null out the cyclic correlations of stationary additive noise and all other co-channel interferences with different cycle frequencies. Thus, the signal detection capability can be significantly improved. The proposed algorithms employ cyclic higher-order statistics of the array output and suppress additive Gaussian noise of unknown spectral content, even when the noise shares common cycle frequencies with the non-Gaussian signals of interest. The proposed method completely exploits temporal information (multiple lag ), and also can correctly estimate direction of arrival of desired signals by suppressing undesired signals. Our approach was generalized over direction of arrival estimation of cyclostationary coherent signals. In this paper, we propose a new approach for exploiting cyclostationarity that seems to be more advanced in comparison with the other existing direction finding algorithms.

300-mW average output power hybrid mode-locked thulium-doped fiber laser

We report on ring thulium-doped fiber laser hybrid mode-locked by single-walled carbon nanotubes and nonlinear polarization evolution generating 600-fs pulses at 1910-1980nm wavelength band with 72.5MHz repetition rate. Average output power reached 300mW in single-pulse operation regime, corresponding to 4.88kW peak power and 2.93nJ pulse energy.

Wireless power and data transfer via a common inductive link using frequency division multiplexing

For wireless power transfer (WPT) systems, communication between the primary side and the pickup side is a challenge because of the large air gap and magnetic interferences. A novel method, which integrates bidirectional data communication into a high-power WPT system, is proposed in this paper. The power and data transfer share the same inductive link between coreless coils. Power/data frequency division multiplexing technique is applied, and the power and data are transmitted by employing different frequency carriers and controlled independently. The circuit model of the multiband system is provided to analyze the transmission gain of the communication channel, as well as the power delivery performance. The crosstalk interference between two carriers is discussed. In addition, the signal-to-noise ratios of the channels are also estimated, which gives a guideline for the design of mod/demod circuits. Finally, a 500-W WPT prototype has been built to demonstrate the effectiveness of the proposed WPT system.

Outage-optimal relay strategy under outdated channel state information in decode-and-forward cooperative communication systems

In this study, the authors investigate the outage-optimal relay strategy under outdated channel state information (CSI) in a decode-and-forward cooperative communication system. They first confirm mathematically that minimising the outage probability under outdated CSI is equivalent to minimising the conditional outage probability on the outdated CSI of all the decodable relays' links. They then propose a multiple-relay strategy with optimised transmitting power allocation (MRS-OTPA) that minimises the conditional outage probability. It is shown that this MRS is a generalised relay approach to achieve the outage optimality under outdated CSI. To reduce the complexity, they also propose a MRS with equal transmitting power allocation (MRS-ETPA) that achieves near-optimal outage performance. It is proved that full spatial diversity, which has been achieved under ideal CSI, can still be achieved under outdated CSI through MRS-OTPA and MRS-ETPA. Finally, the outage performance and diversity order of MRS-OTPA and MRS-ETPA are evaluated by simulation.

Az információterjedés szerepe az innováció-elfogadásban. Az okostelefonok és az on-line kollektív intelligencia (Role of informationspread in the innovation acceptance: the smart phones and the online collective intelligence)

A tanulmány célja az innováció-terjedés marketingvonzatú irodalmának bemutatása, valamint betekintés az exploratív tartalomelemzés módszerével az informális, kollektív intelligenciát generáló on-line felületek, nevesül a blogok és fórumok kutathatóságába. Az okostelefonok innováció-elfogadásának példáján keresztül a szerzők megpróbálják felderíteni az információterjedés elméletének megvalósulását az elemzett felületeken. Bemutatnak három, a mintára jellemző információterjedési és felvett szerep mintát, melyek alapul szolgálhatnak a további célirányú kutatások számára. / === / Adaptive smart phones that give space for user-added functions create active online discussions. Committed users are ready to share information, advise others, while less expert users seek this information. In their paper the authors show that related user-generated content i.e. blogs and bulletin boards provide a rich data source for analysis, which gives them the opportunity to further elaborate on the diffusion of information in the case of smart phone usage among online Hungarian users. Online collective intelligence may well contribute to the diffusion of innovations through diffusing information. Following a thorough review on the literature on the diffusion of innovations, in their exploratory content analysis, they found two categories of users on the analyzed boards: a first group we dubbed "experts" (corresponding to innovators in Bass's typology) that made a special effort trying to solve particular problems thus contributing to collective intelligence, thus reducing (among others) the perceived complexity of these phones and adding to their trialability, both factors influencing users' innovation acceptance, and a second group, "simple users" (or imitators in Bass's typology), uninterested in product innovation, still asking questions and searching for solutions concerning extant technology. Manufacturers do not seem yet to regard these boards as a source of valuable data, even though these clearly serve as an important pool of information and a growing factor of decision for their potential customers.

Hatalmi távolság és intézményi kollektivizmus – a versenyképesség előrejelzése szövegelemzéssel (Power distance and institutional collectivism – Forecast of competitiveness by text analysis)

A tárgyalófelek elé kitett mobiltelefon alkalmazása előrejelzi a beszélgetőpartnerek versenyképességét a versenyképesség-mutatók alapján, javaslatokat adva a tárgyalás további menetére. Ez a vízió nyilván még futurisztikus, ám a csúcsvezetői nyilatkozatok rejtett szövegtartalma alapján következtetéseket levonni a képviselt szervezetek versenyképességi orientációira – ez már ma lehetőség. A GLOBE-projekt kultúrakutatási módszertanával, valamint szövegelemzési módszerekkel sikerült kimutatni a versenyképességet előrejelző hatalmi távolság és az intézményi kollektivizmus szövegbeli jeleit. Mindez eszközt jelenthet egyebek mellett a szervezetfejlesztéssel, hírszerzéssel, HR-gazdálkodással foglalkozó szakembereknek is. _______ The use of the mobile telephones laid in front of the negotiators during their conversations forecasts their indicators of competitiveness and gives suggestions for the further course of negotiation. This is obviously a futuristic vision, but drawing conclusions from the hidden content of top management narratives concerning the competitive cultural orientations of the represented organizations is a possibility that is already available. Using the culture research methodology of the GLOBE project as well as text analysis methods, it was possible to reveal narrative patterns both of the power distance, forecasting competitiveness, and of institutional collectivism. These findings may be useful tools for professionals, among others of organizational development, intelligence service and HR management.

Az on-line szájreklám (electronic word-of-mouth) jellemzői a marketingkommunikáció szempontjából

Az on-line térben a vállalatok elveszítik a hagyományos tömegkommunikációban gyakorolt kontrollt, ugyanakkor kommunikációs szerepükből fakadóan megmarad egy ráhatási képességük. Ahhoz azonban, hogy e ráhatási képességet ki tudják használni, megfelelő eszközöket kell alkalmazniuk, amelyek közül az egyik lehetőség az on-line szájreklám (electronic word-of-mouth, e-WOM). A cikk egy szakirodalmi összefoglalót nyújt az e-WOM-ról, kitérve arra, hogy milyen új kommunikációs kihívásokkal és lehetőségekkel néznek szembe a fogyasztók és a vállalatok az on-line térben. Továbbá hogyan értelmezhető az e-WOM, milyen alapvető tulajdonságokkal és a fogyasztókra, valamint a vállalatokra gyakorolt hatásokkal rendelkezik. Ezen ismeretekre építve pedig a szerző bemutatja azt is, hogy a fogyasztók között zajló on-line kommunikáció (vagyis az e-WOM) hogyan integrálható a marketingkommunikációs tevékenységbe.

Physical dynamic simulation of shipboard power system components in a distributed computational environment

Shipboard power systems have different characteristics than the utility power systems. In the Shipboard power system it is crucial that the systems and equipment work at their peak performance levels. One of the most demanding aspects for simulations of the Shipboard Power Systems is to connect the device under test to a real-time simulated dynamic equivalent and in an environment with actual hardware in the Loop (HIL). The real time simulations can be achieved by using multi-distributed modeling concept, in which the global system model is distributed over several processors through a communication link. The advantage of this approach is that it permits the gradual change from pure simulation to actual application. In order to perform system studies in such an environment physical phase variable models of different components of the shipboard power system were developed using operational parameters obtained from finite element (FE) analysis. These models were developed for two types of studies low and high frequency studies. Low frequency studies are used to examine the shipboard power systems behavior under load switching, and faults. High-frequency studies were used to predict abnormal conditions due to overvoltage, and components harmonic behavior. Different experiments were conducted to validate the developed models. The Simulation and experiment results show excellent agreement. The shipboard power systems components behavior under internal faults was investigated using FE analysis. This developed technique is very curial in the Shipboard power systems faults detection due to the lack of comprehensive fault test databases. A wavelet based methodology for feature extraction of the shipboard power systems current signals was developed for harmonic and fault diagnosis studies. This modeling methodology can be utilized to evaluate and predicate the NPS components future behavior in the design stage which will reduce the development cycles, cut overall cost, prevent failures, and test each subsystem exhaustively before integrating it into the system.