Profilometry of semiconductor components by two-colour holography with Bi12TiO20 crystals

We studied the shape measurement of semiconductor components by holography with photorefractive Bi12TiO20 crystal as holographic medium and two diode lasers emitting in the red region as light sources. By properly tuning and aligning the lasers a synthetic wavelength was generated and the resulting holographic image of the studied object appears modulated by cos2-contour fringes which correspond to the intersection of the object surface with planes of constant elevation. The position of such planes as a function of the illuminating beam angle and the tuning of the lasers was studied, as well as the fringe visibility. The fringe evaluation was performed by the four stepping technique for phase mapping and through the branch-cut method for phase unwrapping. A damage in an integrated circuit was analysed as well as the relief of a coin was measured, and a precision up to 10 μm was estimated. © 2009 SPIE.

Development of a prototype for measuring plantar forces

Studies on the distribution of plantar pressure between the sole of the foot and the ground were developed before the 19th century. Currently, the most often employed plantar pressure measurement systems are Pedar® and FScan®, which have restrictions such as operational difficulty and high cost. In the present study, a device was constructed from two pressure plates capable of measuring plantar forces in discreet areas of the feet at a low cost, using strain-gages attached to sixteen strategic points of the mechanical elements. Sixteen prismatic beams were soldered to each frame, for which the free extremity of each beam represented a specific point of the foot. Two strain gauges were attached to each beam - one near the upper fixed extremity and the other near the lower fixed extremity. Using a Wheatstone bridge electric circuit, the gauges were used to measure the force acting on the extremity of the beam. Precision and accuracy of the prototype was about 10%. In some measurements, accuracy was 2%. The low precision and accuracy were mainly due to the restrictions of the available equipment, which only permitted four measurements at a time. Thus, it was necessary for participants to stand on the plates four separate times, which signified possible changes in the position of the feet on the pressure plates. Despite some limitations, the aim was achieved. The prototype has been used in some studies and represents a contribution to biomechanics, demonstrating the viability of using strain gauges.

Monitoring of the Plan of Action eLAC2010: Advances and challenges of the information society in Latin America and the Caribbean

Includes bibliography

Maximal clenching effort influence on the electromyographic activity of the trapezius muscle in healthy subjects

Alteration of the occlusion and the position of the jaw can affect the muscles of the neck, due to a relationship between the masticatory and cervical systems. Thus, the objective of this study was to verify whether the bite in maximal clenching effort, in centric occlusion, in individuals with clinically normal occlusion, and without a history of dysfunction in the masticatory system, influences the electromyographic activity of the upper trapezius muscle. A total of 19 normal individuals participated in the study, 14 of which were women (average age of 25.4 ± 4.14 years), and 5 were men (average age of 24.11 ± 3.28 years). The root mean square (RMS) amplitude and median frequency (MF) of the upper trapezium muscle with 40% and 60% of maximal voluntary contraction were analyzed under pre- and post-maximal clenching effort conditions in centric occlusion. The electromyographic signal was collected with a sampling frequency of 2. kHz and the value in RMS was obtained by a moving window of 200. ms. The paired Student's t-test was used to compare RMS amplitude and MF under pre- and post-maximal clenching effort conditions. The level of significance for each comparison was set to p<0.05. This study concluded that in individuals without a history of dysfunction of the masticatory system, maximum clenching effort in centric occlusion does not alter the electromyographic signal of the upper trapezius. © 2009 Elsevier Ltd.

Trade and poverty in Paraguay: the case of an agribusiness value chain

Incluye bibliografía

Trade and poverty in Paraguay: the case of an agribusiness value chain

Includes bibliography

Locating invariant tori for a family of two-dimensional Hamiltonian mappings

The location of invariant tori for a two-dimensional Hamiltonian mapping exhibiting mixed phase space is discussed. The phase space of the mapping shows a large chaotic sea surrounding periodic islands and limited by a set of invariant tori. Given the mapping considered is parameterised by an exponent γ in one of the dynamical variables, a connection with the standard mapping near a transition from local to global chaos is used to estimate the position of the invariant tori limiting the size of the chaotic sea for different values of the parameter γ. © 2011 Elsevier B.V. All rights reserved.

Radicular anatomy of twelve representatives of the Catasetinae subtribe (Orchidaceae: Cymbidieae)

Considering that the root structure of the Brazilian genera belonging to the Catasetinae subtribe is poorly known, we describe the roots of twelve representatives from this subtribe. For anatomical analysis, the roots were fixed in FAA 50, preserved in ethanol 70% and sectioned at its medium region using razor blades. The sections were stained with 0.05% astra blue and safranin and mounted in glycerin. For the identification of starch we used Lugol ́s solution; for lignin, floroglucin chloridric; for lipids, Sudan III, and for flavanoids, potassium hydroxide. The relevant aspects were registered using a digital camera joined with an Olympus microspope (BX51 model). The structural similarities of all roots support the placement of the subtribe Catasetinae into the monophyletic tribe Cymbidieae. Some root features are restricted to one or two taxa and can be useful in the systematics of the subtribe. For example, the occurrence of flavonoidic crystals characterizes the genera Catasetum and Cychnodes, and the number of the velamen layers and the shape of the epivelamen cells are useful to confirm the taxonomic position of Clowesia amazonica. The presence of velamen and flavonoidic crystals was interpreted as an adaptation to the epiphytic habit.

In memory of Pedro Vuskovic

For those of us who shared many years of friendship and professional collaboration with Pedro Vuskovic, the news of his recent death in Mexico has been the cause of great sorrow, not only because of the circumstances of his death, following a cruel disease that gradually sapped his physical -but not intellectual- strength, but also because it signifies the loss of a great Latin American, of a teacher who helped shape so many generations of young people in our region, and of a companion during so many days of intellectual strivings and political struggle. Pedro joined the Commission in 1950, shortly after its birth as an institution. For nearly 20 years he served it brilliantly in a professional capacity, with his career in ECLAC culminating in the position of Director of the Development Division. He played a crucial role in structuring and disseminating the thinking of ECLAC during a time when the very air teemed with the ideas and concerns of a pleiad of gifted economists and social scientists. These were the post-war years, the 1950s and 1960s, when we all had to "construct" Latin America. Pedro Vuskovic laid many of the bricks in that collective theoretical and political edifice which has been of such importance to the countries of the region. Concurrently, he served as a professor in ECLAC and ILPES training programmes while at the same time teaching classes at the schools of economics and sociology at the University of Chile and the School of Economics at the University of Concepción. When he left ECLAC, Pedro plunged wholeheartedly into the academic world, serving as the Director of the Institute of Economics of the University of Chile, and then went on to claim a position at the forefront of Chilean politics. In November 1970 he was named Minister of Economic Affairs by President Salvador Allende and in June 1972, took over the cabinet-level position of Executive Vice President of the Production Development Corporation (CORFO);, where he served until September 1973. When political events carried him into exile in Mexico, which generously welcomed him as it did so many other Latin Americans who faced similar problems, Pedro carried on his valuable academic work, first at the Economic Research and Teaching Centre (CIDE);, where he directed the Institute of Economic Studies of Latin America, and later at the Centre for Interdisciplinary Research in the Humanities at the National University of Mexico (UNAM);, where he was named to the position of Coordinator for a programme on poverty and development options in various countries of Latin America. Although he will be remembered for his important political role, Pedro's work as a scholar and as an economist deserve special mention. He was a brilliant speaker, at the same time both methodical and incisive, who mastered his subjects with great wisdom and intellectual breadth, and he derived a special joy from being with young people, from providing them with intellectual stimulation and receiving it from them in turn. The many generations of Latin American students who were fortunate enough to have him as a teacher can attest to this. Pedro Vuskovic brought to his work as a researcher and teacher a deep sense of political and social responsibility which moved him to espouse the cause of Latin America 's poor and dispossessed, whose position he had come to understand very early on in his life through the many studies he carried out in this area while at ECLAC. He was tenacious in upholding his ideas and principles, he lived in accordance with them, and he championed them in all the forums open to him, in both the political and academic worlds, to the end of his days. His friends and colleagues also remember his geniality, his sense of humour and great personal warmth -traits which were coupled with an unshakable loyalty to his principles and values. Our farewell is deeply felt; Pedro Vuskovic has left us a legacy of memories and lessons that we will always hold close to our hearts. On behalf of his friends and colleagues, Jacobo Schatan, former Director of the Joint ECLAC/FAO, Agriculture Division

A New Miniature Characid (Ostariophysi: Characiformes: Characidae), with Phylogenetic Position Inferred from Morphological and Molecular Data

Erythrocharax altipinnis is described from the Serra do Cachimbo, Pará, Brazil. The new taxon is distinguished from all of the Characidae genera by having the pelvic bones firmly attached through the isquiatic processes; a nearly triangular hiatus in the musculature covering the anterior chamber of the swim bladder between the first and second pleural ribs (pseudotympanum); the pedunculate, notably expanded and distally compressed teeth in both jaws; circumorbital series represented by antorbital and four infraorbital bones with laterosensory canals not enclosed; a single tooth row in the premaxillary with the teeth perfectly aligned and similar in shape and cusp number; the first three branched dorsal-fin rays distinctly elongate in males; a bright red adipose and caudal fins in life; a conspicuous dark midlateral stripe extending from the opercle to the tip of the median caudal-fin rays; and by the absence of a humeral spot. The phylogenetic position of the new taxon is discussed using morphological and molecular datasets, with conflicting results of both approaches discussed. Additionally, a summarized discussion on the current problems in the Characidae taxonomy is presented and the principal biases in the morphological dataset are also discussed. © 2013 Netto-Ferreira et al.

Triangular arrangement of defects in a mesoscopic superconductor

By solving the time dependent Ginzburg-Landau equations, we investigated the influence of an internal triangular arrangement of point-like defects on the vortex configurations in a thin mesoscopic sample. The effect of the number of internal defects and their nature on the entrance position of the vortex is studied for a very thin circular sample. We found that the interplay between the vortex-vortex repulsion, the vortex-defect interaction and the interaction with the sample border leads to non-commensurate vortex configurations. © 2012 Elsevier B.V. All rights reserved.

Identification of steel bars immersed in reinforced concrete based on experimental results of eddy current testing and artificial neural network analysis

This paper presents an experimental research on the use of eddy current testing (ECT) and artificial neural networks (ANNs) in order to identify the gauge and position of steel bars immersed in concrete structures. The paper presents details of the ECT probe and concrete specimens constructed for the tests, and a study about the influence of the concrete on the values of measured voltages. After this, new measurements were done with a greater number of specimens, simulating a field condition and the results were used to generate training and validation vectors for multilayer perceptron ANNs. The results show a high percentage of correct identification with respect to both, the gauge of the bar and of the thickness of the concrete cover. © 2013 Copyright Taylor and Francis Group, LLC.

Healing of buccal dehiscence defects at implants installed immediately into extraction sockets - an experimental study in dogs

Aim: To evaluate the influence of implant positioning into extraction sockets on bone formation at buccal alveolar dehiscence defects. Material and Methods: In six Labrador dogs the pulp tissue of the mesial roots of 4P4 was removed and the root canals were filled. Flaps were elevated bilaterally, the premolars hemi-sectioned and the distal roots removed. The implants were placed in contact with either the buccal (test site) or with the lingual (control site) bony wall of the extraction sockets. Healing abutments were affixed and triangular buccal bony dehiscence defects, about 2.7 mm deep and 3.5 mm wide, were then prepared. No regenerative procedures were done and a non-submerged healing was allowed. After 4 months of healing, block sections of the implant sites were obtained for histological processing and peri-implant tissue assessment. Results: After 4 months of healing, the bony crest and the coronal border of osseointegration at the test sites were located 1.71 ± 1.20 and 2.50 ± 1.21 mm apically to the implant shoulder, respectively. At the control sites, the corresponding values were 0.68 ± 0.63 and 1.69 ± 0.99 mm, respectively. The differences between test and control reached statistical significance (P < 0.05). Residual marginal bone defects were found both at the test and control sites. A statistically significant difference between test and control sites was only found at the lingual aspects (depth 2.09 ± 1.01 and 1.01 ± 0.48 mm, respectively). Similar heights of the buccal biological width were observed at both sites (about 5.1 mm). Conclusions: The placement of implants in a lingual position of the extraction sockets allowed a higher degree of bone formation at buccal alveolar dehiscence defects compared with a buccal positioning. © 2012 John Wiley & Sons A/S.

Scaling invariance of the diffusion coefficient in a family of two-dimensional Hamiltonian mappings

We consider a family of two-dimensional nonlinear area-preserving mappings that generalize the Chirikov standard map and model a variety of periodically forced systems. The action variable diffuses in increments whose phase is controlled by a negative power of the action and hence effectively uncorrelated for small actions, leading to a chaotic sea in phase space. For larger values of the action the phase space is mixed and contains a family of elliptic islands centered on periodic orbits and invariant Kolmogorov-Arnold-Moser (KAM) curves. The transport of particles along the phase space is considered by starting an ensemble of particles with a very low action and letting them evolve in the phase until they reach a certain height h. For chaotic orbits below the periodic islands, the survival probability for the particles to reach h is characterized by an exponential function, well modeled by the solution of the diffusion equation. On the other hand, when h reaches the position of periodic islands, the diffusion slows markedly. We show that the diffusion coefficient is scaling invariant with respect to the control parameter of the mapping when h reaches the position of the lowest KAM island. © 2013 American Physical Society.

A rescaling of the phase space for Hamiltonian map: Applications on the Kepler map and mappings with diverging angles in the limit of vanishing action

A rescale of the phase space for a family of two-dimensional, nonlinear Hamiltonian mappings was made by using the location of the first invariant Kolmogorov-Arnold-Moser (KAM) curve. Average properties of the phase space are shown to be scaling invariant and with different scaling times. Specific values of the control parameters are used to recover the Kepler map and the mapping that describes a particle in a wave packet for the relativistic motion. The phase space observed shows a large chaotic sea surrounding periodic islands and limited by a set of invariant KAM curves whose position of the first of them depends on the control parameters. The transition from local to global chaos is used to estimate the position of the first invariant KAM curve, leading us to confirm that the chaotic sea is scaling invariant. The different scaling times are shown to be dependent on the initial conditions. The universality classes for the Kepler map and mappings with diverging angles in the limit of vanishing action are defined. © 2013 Published by Elsevier Inc. All rights reserved.