Coolability of porous core debris beds : Effects of bed geometry and multi-dimensional flooding

This thesis addresses the coolability of porous debris beds in the context of severe accident management of nuclear power reactors. In a hypothetical severe accident at a Nordic-type boiling water reactor, the lower drywell of the containment is flooded, for the purpose of cooling the core melt discharged from the reactor pressure vessel in a water pool. The melt is fragmented and solidified in the pool, ultimately forming a porous debris bed that generates decay heat. The properties of the bed determine the limiting value for the heat flux that can be removed from the debris to the surrounding water without the risk of re-melting. The coolability of porous debris beds has been investigated experimentally by measuring the dryout power in electrically heated test beds that have different geometries. The geometries represent the debris bed shapes that may form in an accident scenario. The focus is especially on heap-like, realistic geometries which facilitate the multi-dimensional infiltration (flooding) of coolant into the bed. Spherical and irregular particles have been used to simulate the debris. The experiments have been modeled using 2D and 3D simulation codes applicable to fluid flow and heat transfer in porous media. Based on the experimental and simulation results, an interpretation of the dryout behavior in complex debris bed geometries is presented, and the validity of the codes and models for dryout predictions is evaluated. According to the experimental and simulation results, the coolability of the debris bed depends on both the flooding mode and the height of the bed. In the experiments, it was found that multi-dimensional flooding increases the dryout heat flux and coolability in a heap-shaped debris bed by 47–58% compared to the dryout heat flux of a classical, top-flooded bed of the same height. However, heap-like beds are higher than flat, top-flooded beds, which results in the formation of larger steam flux at the top of the bed. This counteracts the effect of the multi-dimensional flooding. Based on the measured dryout heat fluxes, the maximum height of a heap-like bed can only be about 1.5 times the height of a top-flooded, cylindrical bed in order to preserve the direct benefit from the multi-dimensional flooding. In addition, studies were conducted to evaluate the hydrodynamically representative effective particle diameter, which is applied in simulation models to describe debris beds that consist of irregular particles with considerable size variation. The results suggest that the effective diameter is small, closest to the mean diameter based on the number or length of particles.

Utilization of multi-branding in business to business markets

Case company utilizes multi-branding strategy (or house of brands strategy) in its product portfolio. In practice the company has multiple brands – one main brand and four acquired brands – which all utilize one single product platform. The objective of this research is to analyze case company’s multi-branding strategy and its benefits and challenges. Moreover, the purpose is to clarify that how could a company in B2B markets utilize multi-branding strategy more efficiently and profitably. The theoretical part of this thesis consists of aspects of branding strategies; different brand name architectures, benefits and challenges of different strategies and different ways of utilize branding strategies in mergers and acquisitions. The empirical part, on the other hand, includes the description of the case company’s branding strategy and the employees’ perspective on the benefits and challenges of multi-branding strategy, and how to utilize it more efficiently and profitably. This study shows, that the major benefits of utilizing multi-branding are lower production costs, ability to reach wider market coverage, possibility to utilize common sales tools, synergies in R&D and shared resources. On the other hand, the major challenges are lack of product differentiation, internal competition, branding issues in production and deliveries, pricing issues and conflicts, and compromises in product compatibility and suitability. Based on the results, several ways to utilize multi-branding strategy more efficiently and profitably were found; by putting more effort on brand image and product differentiation, by having more co-operation among the brands and by focusing on more precise customer and market segmentation.

Control of multi-actuator system by an electrically driven hydraulic pump-motor

The awareness and concern of our environment together with legislation have set more and more tightening demands for energy efficiency of non-road mobile machinery (NRMM). Integrated electro-hydraulic energy converter (IEHEC) has been developed in Lappeenranta University of Technology (LUT). The elimination of resistance flow, and the recuperation of energy makes it very efficient alternative. The difficulties of IEHEC machine to step to the market has been the requirement of one IEHEC machine per one actuator. The idea is to switch IEHEC between two actuators of log crane using fast on/off valves. The control system architecture is introduced. The system has been simulated in co-simulation using two different software. The simulated responses of pump-controlled system is compared to the responses of the conventional valve-controlled system.

Analysis and guidelines for implementation of EN 1090-2 Standard to assist execution class assignment of steel structures

Finnish design and consulting companies are delivering robust and cost-efficient steel structures solutions to a large number of manufacturing companies worldwide. Recently introduced EN 1090-2 standard obliges these companies to specify the execution class of steel structures for their customers. This however, requires clarifying, understanding and interpreting the sophisticated procedure of execution class assignment. The objective of this research is to provide a clear explanation and guidance through the process of execution class assignment for a given steel structure and to support the implementation of EN 1090-2 standard in Rejlers Oy, one of Finnish design and consulting companies. This objective is accomplished by creating a guideline for designers that elaborates on the four-step process of the execution class assignment for a steel structure or its part. Steps one to three define the consequence class (projected consequences of structure failure), the service category (hazards associated with the service use exploitation of steel structure) and the production category (manufacturing process peculiarities), based on the ductility class (capacity of structure to withstand deformations) and the behaviour factor (corresponds to structure seismic behaviour). The final step is the execution class assignment taking into account results of previous steps. Main research method is indepth literature review of European standards family for steel structures. Other research approach is a series of interviews of Rejlers Oy representatives and its clients, results of which have been used to evaluate the level of EN 1090-2 awareness. Rejlers Oy will use the developed novel coherent standard implementation guideline to improve its services and to obtain greater customer satisfaction.

Deviations of Governance In IT Multi-Sourcing: A Case Study

IT outsourcing (ITO) refers to the shift of IT/IS activities from internal to external of an organization. In prior research, the governance of ITO is recognized with persistent strategic importance for practice, because it is tightly related to ITO success. Under the rapid transformation of global market, the evolving practice of ITO requires updated knowledge on effective governance. However, research on ITO governance is still under developed due to the lack of integrated theoretical frameworks and the variety of empirical settings besides dyadic client-vendor relationships. Especially, as multi-sourcing has become an increasingly common practice in ITO, its new governance challenges must be attended by both ITO researchers and practitioners. To address this research gap, this study aims to understand multi-sourcing governance with an integrated theoretical framework incorporating both governance structure and governance mechanisms. The focus is on the emerging deviations among formal, perceived and practiced governance. With an interpretive perspective, a single case study is conducted with mixed methods of Social Network Analysis (SNA) and qualitative inquiries. The empirical setting embraces one client firm and its two IT suppliers for IT infrastructure services. The empirical material is analyzed at three levels: within one supplier firm, between the client and one supplier, and among all three firms. Empirical evidences, at all levels, illustrate various deviations in governance mechanisms, with which emerging governance structures are shaped. This dissertation contributes to the understanding of ITO governance in three domains: the governance of ITO in general, the governance of multi-sourcing in particular, and research methodology. For ITO governance in general, this study has identified two research strands of governance structure and governance mechanisms, and integrated both concepts under a unified framework. The composition of four research papers contributes to multi-sourcing research by illustrating the benefits of zooming in and out across the multilateral relationships with different aspects and scopes. Methodologically, the viability and benefit of mixed-method is illustrated and confirmed for both researchers and practitioners.

26-8-20, circuit de la Sarthe, Duverne sur Rudge Multi : [photographie de presse] / [Agence Rol]

Référence bibliographique : Rol, 60729

Six-month outcomes of a multi-campus smoking cessation contest

Background: Up to 40% of North American post-secondary students smoke at least occasionally, and most want to quit. Given students' preferences for free, easy-to-access, self-directed, convenient cessation methods, a motivational, incentive-based cessation contest may be an effective way to assist students to quit. The current study describes 3- and 6-month outcomes experienced by post-secondary student smokers who entered the 'Let's Make A Deal!' contest. Methodology: Contestants from five university campuses who chose to quit completely ('Quit For Good') or reduce their tobacco consumption by 50% ('Keep The Count') were invited to participate in a study of the contest. Three and six months after registration, participants were contacted by phone to assess their smoking and quitting behaviours. Qualitative and quantitative measures were collected, including weekly tobacco consumption, efficacy to resist temptations to smoke, use of quitting aids, and strategies to cope with withdrawal. Quitting was assessed using 7-day point prevalence and continuous abstinence. Results: Seventy-four (64.9%) of the 114 participants recruited for the study completed the follow-ups. Over 31 % of participants who entered Quit For Good and 23.5% of participants who entered Keep The Count were identified as quitters at the 6-month follow-up. Among the quitters, 45.5% experienced sustained abstinence from smoking for the 6-month duration of the study. Keep The Count contestants reduced their tobacco consumption by 57.2% at 3-month follow-up and sustained some of this reduction through to the 6-month follow-up. Qualitative data provides insights into how quitters coped with withdrawal and what hampered continuing smokers' efforts to quit. Significance: A motivational, incentive-based contest for post-secondary students can facilitate both smoking cessation and harm reduction. The contest environment, incentives, resources, and "buddies" provide positive structural and social supports to help smokers overcome potential barriers to quitting, successfully stop smoking, and manage potential triggers to relapse. The contest cessation rates are higher than the typical 5-7% associated with unassisted quitting.

Canada/U.S. border crossing: facilitation and constraint

Abstract The aim of this research project is to draw on accounts of experiences ofborder crossing and regulation at the Canada/U.S. border at Niagara in order to illuminate the dynamics of differentiation and inequality at this site. The research is informed by claims that the world is turning into a global village due to transnational flows oftechnology, infonnation, capital and people. Much of the available literature on globalization shows that while the transfer of technology, information, and capital are enhanced, the transnational movement of people is both facilitated and constrained in complex and unequal ways. In this project, the workings of facilitation and constraint were explored through an analysis often interviews with people who had spent a substantial portion oftheir childhood (e.g. 5 years) in a Canadian border community. The interviewees were at the time ofthe research between the ages of 19 and 25. Because most ofthe respondents were 'white' Canadians of working to upper middle class status, my focus was to explore how 'whiteness' as privilege may translate into enhanced movement across borders and how 'white' people may internalize and enjoy this privilege but may often deny its reality. I was also interested in how inequality is perceived, understood, and legitimated by these relatively privileged people. My analysis ofthe ten accounts ofborder crossing and regulation suggests that differentially situated people experience border crossing differently. An important finding is that while relatively privileged border crossers perceived and often problernatized differential treatment based on external factors such as physical appearance, and especially race, most did not challenge such treatment but rather saw it as acceptable. These findings are located within newer literature that addresses the increasing securitization ofborders and migration in western societies.

On the anharmonic, multi-phonon, Debye-Waller contributions to the phonon-limited resistivity of metals : applications to Na and K

The anharmonic, multi-phonon (MP), and Oebye-Waller factor (OW) contributions to the phonon limited resistivity (;0) of metals derived by Shukla and Muller (1979) by the doubletime temperature dependent Green function method have been numerically evaluated for Na and K in the high temperature limit. The anharmonic contributions arise from the cubic and quartic shift of phonons (CS, QS), and phonon width (W) and the interference term (1). The QS, MP and OW contributions to I' are also derived by the matrix element method and the results are in agreement with those of Shukla and Muller (1979). In the high temperature limit, the contributions to;O from each of the above mentioned terms are of the type BT2 For numerical calculations suitable expressions are derived for the anharmonic contributions to ~ in terms of the third and fourth rank tensors obtained by the Ewald procedure. The numerical calculation of the contributions to;O from the OW, MP term and the QS have been done exactly and from the CS, Wand I terms only approximately in the partial and total Einstein approximations (PEA, TEA), using a first principle approach (Shukla and Taylor (1976)). The results obtained indicate that there is a strong pairwise cancellation between the: OW and MP terms, the QS and CS and the Wand I terms. The sum total of these contributions to;O for Na and K amounts to 4 to 11% and 2 to 7%, respectively, in the PEA while in the TEA they amount to 3 to 7% and 1 to 4%, respectively, in the temperature range.

What gets plans off the shelf? : a multi-site case study of the factors influencing municipal recreation plan implementation

Municipalities that engage in recreation planning have the potential to use their resources more effectively. However, successful planning means getting the plan off the shelf and implemented. This study investigated the factors that influenced municipal recreation plan implementation in three municipalities. Interviews were conducted with eleven key informants (recreation directors, planning consultants, a city councillor, and members of plan steering committees). The findings of this study suggested that because the implementation of recreation plans occurs in a highly political environment, recreation professionals will need effective strategies to get their plans implemented and that implementation can be facilitated by developing or expanding strategies that: (l) build the power of the recreation department within the municipal government structure; (2) build support for recreation within the local community; and (3) build the political and organizational capacity in the recreation department.

A Multi-Objective Genetic Algorithm with Side Effect Machines for Motif Discovery

Understanding the machinery of gene regulation to control gene expression has been one of the main focuses of bioinformaticians for years. We use a multi-objective genetic algorithm to evolve a specialized version of side effect machines for degenerate motif discovery. We compare some suggested objectives for the motifs they find, test different multi-objective scoring schemes and probabilistic models for the background sequence models and report our results on a synthetic dataset and some biological benchmarking suites. We conclude with a comparison of our algorithm with some widely used motif discovery algorithms in the literature and suggest future directions for research in this area.

Multi-Objective Genetic Algorithms for the Single Allocation Hub Location Problem

Hub Location Problems play vital economic roles in transportation and telecommunication networks where goods or people must be efficiently transferred from an origin to a destination point whilst direct origin-destination links are impractical. This work investigates the single allocation hub location problem, and proposes a genetic algorithm (GA) approach for it. The effectiveness of using a single-objective criterion measure for the problem is first explored. Next, a multi-objective GA employing various fitness evaluation strategies such as Pareto ranking, sum of ranks, and weighted sum strategies is presented. The effectiveness of the multi-objective GA is shown by comparison with an Integer Programming strategy, the only other multi-objective approach found in the literature for this problem. Lastly, two new crossover operators are proposed and an empirical study is done using small to large problem instances of the Civil Aeronautics Board (CAB) and Australian Post (AP) data sets.