A conceptual analysis of m-technology as a medium towards e-governance society in emerging countries

This paper shows how mobile phone technology can influence the development of egovernance in emerging countries. We evaluate the conditions under which consumers really engage with m-services. We argue that the lower cost of m-infrastructure is more appropriate than the Internet-based structure that prevents large part of the population access to ICT. However, m-technology should not be separated from the Internet but be integrated allowing emerging country to leap frog the technological cycle.

Integrating security services into computer supported cooperative work

This research describes the development of a groupware system which adds security services to a Computer Supported Cooperative Work system operating over the Internet. The security services use cryptographic techniques to provide a secure access control service and an information protection service. These security services are implemented as a protection layer for the groupware system. These layers are called External Security Layer (ESL) and Internal Security Layer (ISL) respectively. The security services are sufficiently flexible to allow the groupware system to operate in both synchronous and asynchronous modes. The groupware system developed - known as Secure Software Inspection Groupware (SecureSIG) - provides security for a distributed group performing software inspection. SecureSIG extends previous work on developing flexible software inspection groupware (FlexSIG) Sahibuddin, 1999). The SecureSIG model extends the FlexSIG model, and the prototype system was added to the FlexSIG prototype. The prototype was built by integrating existing software, communication and cryptography tools and technology. Java Cryptography Extension (JCE) and Internet technology were used to build the prototype. To test the suitability and transparency of the system, an evaluation was conducted. A questionnaire was used to assess user acceptability.

Stereotypes of Taiwanese salespeople at the services interface

Stereotypes of salespeople are common currency in US media outlets and research suggests that these stereotypes are uniformly negative. However, there is no reason to expect that stereotypes will be consistent across cultures. The present paper provides the first empirical examination of salesperson stereotypes in an Asian country, specifically Taiwan. Using accepted psychological methods, Taiwanese salesperson stereotypes are found to be twofold, with a negative stereotype being quite congruent with existing US stereotypes, but also a positive stereotype, which may be related to the specific culture of Taiwan.

Technology transfer to developing countries : the case of physical asset management in South Africa

This research investigates technology transfer (TT) to developing countries, with specific reference to South Africa. Particular attention is paid to physical asset management, which includes the maintenance of plant, equipment and facilities. The research is case based, comprising a main case study (the South African electricity utility, Eskom) and four mini-cases. A five level framework adapted from Salami and Reavill (1997) is used as the methodological basis for the formulation of the research questions. This deals with technology selection, and management issues including implementation and maintenance and evaluation and modifications. The findings suggest the Salami and Reavill (1997) framework is a useful guide for TT. The case organisations did not introduce technology for strategic advantage, but to achieve operational efficiencies through cost reduction, higher quality and the ability to meet customer demand. Acquirers favour standardised technologies with which they are familiar. Cost-benefit evaluations have limited use in technology acquisition decisions. Users rely on supplier expertise to compensate for poor education and technical training in South Africa. The impact of political and economic factors is more evident in Eskom than in the mini-cases. Physical asset management follows traditional preventive maintenance practices, with limited use of new maintenance management thinking. Few modifications of the technology or R&D innovations take place. Little use is made of explicit knowledge from computerised maintenance management systems. Low operating and maintenance skills are not conducive to the transfer of high-technology equipment. South African organisations acquire technology as items of plant, equipment and systems, but limited transfer of technology takes place. This suggests that operators and maintainers frequently do not understand the underlying technology, and like workers elsewhere, are not always inclined towards adopting technology in the workplace.

Customer-driven innovation within U.S. business services and its impact on firm performance

This thesis examines the innovative performance of 206 U.S. business service firms. Undeniably, a need exists for better comprehension of the service sector of developed economies. This research takes a unique view by applying a synthesis approach to studying innovation and attempts to build under a proposed strategic innovation paradigm. A quantitative method is utilised via questionnaire in which all major types of innovation are under examination including: product and service, organisational, and technology-driven innovations. Essential ideas for this conceptual framework encapsulate a new mode of understanding service innovation. Basically, the structure of this analysis encompasses the likelihood of innovation and determining the extent of innovation, while also attempting to shed light on the factors which determine the impact of innovation on performance among service firms. What differentiates this research is its focus on customer-driven service firms in addition to other external linkages. A synopsis of the findings suggest that external linkages, particularly with customers, suppliers and strategic alliances or joint ventures, significantly affect innovation performance with regard to the introduction of new services. Service firms which incorporate formal and informal R&D experience significant increases in the extent of new-to-market and new-to-firm innovations. Additionally, the results show that customer-driven service firms experience greater productivity and growth. Furthermore, the findings suggest that external linkages assist service firm performance.

A legal perspective of integrated surface mining, solid waste landfill reclamation and land conservation

In the area of international environmental law this thesis proposes the formulation of one-step planning and permitting regulation for the integrated utilisation of new surface mines as depositories for municipal solid waste. Additionally, the utilisation of abandoned and currently operated surface mines is proposed as solid waste landfills as an integral step in their reclamation. Existing laws, litigation and issues in the United Kingdom, the U.S. and Canada are discussed because of their common legal system, language and heritage. The critical shortage of approved space for disposal of solid waste has caused an urgent and growing problem for both the waste disposal industry and society. Surface mining can serve three important environmental and societal functions inuring to the health and welfare of the public: (1) providing basic minerals for goods and construction; (20 sequentially, to provide critically needed, safe burial sites for society's wastes, and (3) to conserve land by dual purpose use and to restore derelict land to beneficial surface use. Currently, the first two functions are treated environmentally, and in regulation, as two different siting problems, yet they both are earth-disturbing and excavating industries requiring surface restoration. The processes are largely duplicative and should be combined for better efficiency, less earth disturbance, conservation of land, and for fuller and better reclamation of completed surface mines returning the surfaces to greater utility than present mined land reclamation procedures. While both industries are viewed by a developed society and its communities as "bad neighbours", they remain essential and critical for mankind's existence and welfare. The study offers successful examples of the integrated process in each country. The study argues that most non-fuel surface mine openings, if not already safe, can economically, through present containment technology, be made environmentally safe for use as solid waste landfills. Simultaneously, the procedure safeguards and monitors protection of ground and surface waters from landfill contamination.

Servitization within manufacturing:exploring the provision of advanced services and their impact on vertical integration

Purpose – The debate about services-led competitive strategies continues to grow, with much interest emerging around the differing practices between production and servitized operations. The purpose of this paper is to contribute to this discussion by investigating the vertical integration practice (in particular the micro-vertical integration, otherwise known as the supply chain position) of manufacturers who are successful in their adoption of servitization. Design/methodology/approach – To achieve this the authors have investigated a cross-section of four companies which are successfully delivering advanced services coupled to their products. Findings – Manufacturers who have embraced the servitization trend tend to retain capabilities in design and production, and do so because this benefits their speed, effectiveness and costs of supporting assets on advanced services contracts. Research limitations/implications – These are preliminary findings from a longer term research programme. Practical implications – Through this research note the authors seek to simultaneously contribute to the debate in the research community and offer guidance to practitioners exploring the consequences of servitization. Originality/value – Successful servitization demands that manufacturers adopt new and alternative practices and technologies to those traditionally associated with production operations. A prevailing challenge is to understand these differences and their underpinning rationale. Therefore, in this research note, the authors report on the practices of four case companies, explore the rationale underpinning these, and propose an hypothesis for the impact on vertical integration of successful servitization.

Manufacturing technology sourcing practices in the USA

Some companies are heavily reliant on the capabilities of their manufacturing technology for product competitiveness. Likewise, the capabilities of a manufacturing technology are dependent on the sourcing policy that the host company practices. This paper describes research that has explored a wide variety of US companies to understand manufacturing technology sourcing policies and how they have been formed. This research finds that there is a preference amongst the US organizations studied not to become involved with equipment manufacture, though some examples of full integration do occur. These policies are not determined by formalized decision processes, rather they are formed implicitly during technology choice. In this research, factors that influence a technology source have been identified. These drivers are then used to establish a methodology that will help practising managers to form a technology sourcing decision. This methodology takes into account the business demands placed on a technology, along with the characteristics of the host company's supplier base.

Personal selling of high-technology products:the solutions-selling imperative

Traditional focus on the study of high-technology firms and products has practically ignored the importance and potential contributions of the sales force, especially in business-to-business marketing. This article suggests that traditional sales force strategies associated with high-technology products have been supply driven (i.e., driven by the strategies of the marketing firm). We suggest that in order to enhance the success of high-technology products and services, firms need to be more demand driven in their sales structures (i.e., driven by the strategies of the buying firm). We suggest that it is imperative that high-technology firms adopt “solution selling” to enhance high-technology adoption as well as enhance competitiveness. We describe this change in focus and draw out its various managerial and academic implications.

Categorizing 'intention to use' e-government services through mobile phone:the importance of front loading activities

E-government has often been heralded as the new way forwards for emerging countries. While many such countries are already offering e-government services and are gearing up for further growth, little is actually known of the forming stages that are necessary to ensure a greater rate of success and avoid the traditional failure traps linked to new technology and information system adoption and diffusion. We situate our research in the case of mobile phone as a reflection of the current market situation in emerging countries. We contend, in this paper, that more research is needed to understand future intention to use e-government services through mobile phone technology. Front loading activities both from a government and technology perspectives are required to facilitate the decision making process by users.

Technology transfer and sustainable industrial development for developing countries

This paper reports on a part of work for the UNIDO initiative on technology transfer for sustainable industrial development. The proposed technology transfer framework, adapted from the East Asian late industrialisers model, identifies two categories of countries requiring support for enhancing their technological capabilities: (a) very late industrialisers (“low income” developing countries), and (b) slow industrialisers (countries with sizeable manufacturing sectors but limited success in gaining international competitiveness) and three technology transfer routes: (a) through trade and aid to strengthen indigenous production for domestic markets (Route 1); (b) through FDI and contracting to develop export oriented firms (Route 2), and (c) through the supply chain of capital equipment and materials to develop local subcontracting capacity (Route 3). Very late industrialisers need support to start with Route 1 in selected sectors and upgrade through imported mature technologies. Appropriate product innovations are also possible. The slow industrialisers have more scope for increased technology transfer through Routes 2 and 3.

Exploring the adoption of interactive digital television services as a retail shopping platform

The aim of this research is to consider the possible effect of an emerging technology platform on the uptake of online shopping: interactive (digital) Television (iTV), which enables viewers to select a variety of viewing options, publicity materials, games, entertainment and more recently shopping. An augmented version of the original TAM is applied to this study. Two new constructs are considered namely access and awareness together with perceived ease of use, perceived usefulness, perceived enjoyment and security. The results show that indeed the augmented TAM can be used as a predictive model for the adoption of iTV as an online shopping platform. It is concluded that access, perceived ease of use, perceived enjoyment and perceived usefulness are significant factors to determine the consumers’behavioural intentions towards the use of digital TV as a new shopping platform. However, awareness and security are considered to be insignificant with no effect on consumers’ behavioural intentions towards the new shopping medium.

Knowledge management and enterprise risk management implementation in financial services

This paper starts from the viewpoint that enterprise risk management is a specific application of knowledge in order to control deviations from strategic objectives, shareholders’ values and stakeholders’ relationships. This study is looking for insights into how the application of knowledge management processes can improve the implementation of enterprise risk management. This article presents the preliminary results of a survey on this topic carried out in the financial services sector, extending a previous pilot study that was in retail banking only. Five hypotheses about the relationship of knowledge management variables to the perceived value of ERM implementation were considered. The survey results show that the two people-related variables, perceived quality of communication among groups and perceived quality of knowledge sharing were positively associated with the perceived value of ERM implementation. However, the results did not support a positive association for the three variables more related to technology, namely network capacity for connecting people (which was marginally significant), risk management information system functionality and perceived integration of the information systems. Perceived quality of communication among groups appeared to be clearly the most significant of these five factors in affecting the perceived value of ERM implementation.

Servitization of manufacture:exploring the deployment and skills of people critical to the delivery of advanced services

Purpose - This "research note" sets out to fuel the debate around the practices and technologies within operations that are critical to success with servitization. It presents a study of four companies which are delivering advanced services and reports on the organisation and skill-sets of people within these. Design/methodology/approach - This has been case-based research at four manufacturers leading in their delivery of services. Findings - It describes the desirable behaviour of people in the front-line of service delivery, identifies the supporting skill-sets, how these people are organised, and explains why all these factors are so important. Originality/value - This paper contributes to the understanding of the servitization process and, in particular, the implications to broader operations of the firm. © 2013 Emerald Group Publishing Limited. All rights reserved.

An investigation of factors influencing performance in sino-foreign high-technology joint ventures

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT