雨水资源集蓄利用研究综述

由于干旱、人口增长、地表水地下水污染等问题 ,人们对雨水资源的开发利用产生了极大的兴趣并进行了广泛的研究 ,而且已初步显示出雨水资源开发利用的巨大潜力。文中对雨水的汇集、蓄存、利用技术,雨水利用对区域环境的影响,雨水资源的评价,雨水利用的效益评估等方面的最新研究进行了全面的分析总结 ,同时 ,提出了目前研究中亟待解决的问题。

对渭北地区集雨灌溉的思考——以富平县底店乡“窖灌农业”示范区为例

合理高效地利用雨水资源对西北干旱半干旱地区尤其是地表水缺乏地下水不易利用地区的经济发展具有十分重要的意义。基于此 ,我们在陕西省“窖灌农业”试验示范基地对蓄水设施的修筑、运行、维护及水质、雨水利用现状等进行了调研和考察 ,指出了其存在的问题、解决措施及进一步发展的思路 ,为该地及整个渭北地区雨水集流灌溉的进一步发展提供指导和参考

渭北旱塬持续高效农田种植模式研究与示范

根据渭北旱塬自然经济特点 ,提出了该区农业持续发展的关键技术和增产新途径——农田高效优化种植模式 (以双元覆盖小麦为主 )。通过 4a的试验示范与推广 ,结果表明 :该模式可较对照增产小麦6 2 .92 % ;复种黄豆增收 1 5 0 0～ 2 2 5 0 kg/ hm2 ,较对照增产 1 0 0 %。该模式的聚水、保墒、增温和促进有机质矿化、增加土壤养分效应显著 ,可使土壤水、热环境改善 ,充分利用水资源 ,提高用水效率。

黄土丘陵区梯田谷子养分循环特征与生产力关系的研究

以新修梯田7年长期肥料定位试验为依据,研究了不同施肥条件下谷子各部位生物量、养分携出量、养分平衡以及耕层土壤养分时空变化。结果表明,有机肥与N、P肥配合施用可提高谷子的籽粒产量和生物产量。养分携出量的大小顺序为籽粒>叶>糠秕>茎,为同类地区农业生产及生态环境建设提供科学依据。

黄土旱塬麦田生态系统物质平衡及评价

根据长武试区 1986～ 1995年的统计资料并结合田间试验 ,对黄土旱塬麦田生态系统的主要物质 (氮、磷、钾 )循环及平衡特征进行了较为系统的分析。结果表明 ,农田中养分的流动量大 ,流通途径少 ,养分循环的开放性大 ,外循环规模大 ,内循环率小 ;系统养分平衡中 N基本保持收支平衡 ,K2 O入不敷出 ,P2 O5 输入大于输出 ;养分输入中 ,人工投入的化肥与有机肥是养分的主要来源 ,输出中 N主要集中于籽粒 ,K2 O主要集中于秸秆 ,P2 O5 主要残留于土壤中。指出在农业生产中 ,应采用秸秆还田以增加钾的投入 ,同时要增加氮肥投入尤其是有机肥的投入 ,而磷应以提高其有效性为主。

水窖沉沙池结构形式试验设计

通过对单厢式矩形断面、单厢式梯形断面、迷宫式、旋流式等 4种结构形成的沉沙池沉沙效率对比试验表明 ,以迷宫式沉沙池效果最佳 ,平均沉沙效率可达 88.3%。此种结构形式的断面尺寸为 1m、宽 0 .4m ,迷宫室底部比集水渠低 0 .2 m,迷宫分成 5个小厢室 ,每个厢室长 0 .146 m,沉沙池首部的静水池深 0 .2 5 m

基于RS和GIS的纸坊沟流域土地利用动态监测及分析

以纸坊沟流域多年土地利用监测数据为基础 ,对其结果进行分析和讨论。结果表明 ,到 1 999年底 ,农业、林业、牧业用地面积比例分别为 1 6.9%、34.0 %、36.8%。人均基本农田由 1 975年 0 .0 5 4 7hm2 ,增到 1 999年的 0 .2 0 33hm2 ,坡耕地大幅度减少 ,粮食平均产量也由 1 975年的 5 61 kg/hm2 ,增到 1 999年的 2 31 9kg/hm2 ,流域林草有效覆盖率达到 5 7.4% ,植物种类和数量得到增加。走上了农林牧协调发展和生态环境良性循环的轨道

栽培模式和花后去叶对小麦产量及其构成的影响

在黄土高原南部半湿润易旱区以土垫旱耕人为土为供试土壤,进行大田试验,研究了不同栽培模式下花后去叶对产量及其构成的影响。结果表明,不同栽培模式对穗粒数、千粒重和籽粒产量的影响差异显著(P<0.05),集雨面栽培下穗粒数最多;全程覆膜、覆膜150 d和集雨面栽培模式千粒重显著高于常规栽培和三密一稀栽培;全程覆膜栽培下籽粒产量最高。去叶处理对穗粒数、千粒重和籽粒产量影响差异显著(P<0.05),各去叶处理穗粒数均大于对照。不同去叶处理千粒重均小于不去叶对照。不同去叶处理籽粒产量大小顺序为去全旗叶>对照>只保留旗叶>去1/2旗叶>去旗叶、倒二叶。去叶处理对穗粒数、千粒重和籽粒产量的影响因栽培模式不同而有差异。

Reducing H2S production by O-2 feedback control during large-scale sewage sludge composting

Hydrogen sulfide (H2S) production patterns and the influence of oxygen (O-2) concentration were studied based on a well operated composting plant. A real-time, online multi-gas detection system was applied to monitor the concentrations of H2S and O-2 in the pile during composting. The results indicate that H2S was mainly produced during the early stage of composting, especially during the first 40 h. Lack of available O-2 was the main reason for H2S production. Maintaining the O-2 concentration higher than 14% in the pile could reduce H2S production. This study suggests that shortening the interval between aeration or aerating continuously to maintain a high O-2 concentration in the pile was an effective strategy for restraining H2S production in sewage sludge composting. (C) 2010 Elsevier Ltd. All rights reserved.

Model analysis of dissolved inorganic phosphorus exports from the Yangtze river to the estuary

In this paper, we estimate the inputs of phosphorus (P) to the Yangtze River Basin and exports of dissolved inorganic phosphorus (DIP) from the river to the estuary for the period 1970-2003, by using the global NEWS-DIP model. Modeled DIP yields range from 2.5 kg P km(-2) yr(-1) in 1970 to 4.6 kg P km(-2) yr(-1) in 1985, and then dramatically increase to 14.1 kg P km(-2) yr(-1) in 2003. No significant difference between the modeled and measured values at the level of P = 0.05 is observed. The study also demonstrates variable source contributions of P to the modeled DIP during the period 1970-2003. Point sewage P input accounted for approximately 100% in the period 1970-1985 and substantially decreased to 24.8% in 2003. Chemical fertilizer contributed 25.4% of DIP yields in 1986 and increased continuously to 50.3% in 2003, while a stable trend in manure P contribution averaging 22.9% of DIP yields was shown in the same period. The study concludes that P inputs to the Yangtze River Basin and the river DIP export to the estuary have substantially increased during the study period consequence to human pressure.

Perfectly Hydrophobic Silicone Nanofiber Coatings: Preparation from Methyltrialkoxysilanes and Use as Water-Collecting Substrate

Perfectly hydrophobic (PHO) coatings consisting of silicone nanofibers have been obtained via a solution process using methyltrialkoxysilanes as precursors. On the basis of thermal gravimetry and differential thermal analysis (TG-DTA) and Fourier transform infrared spectroscopy (FTIR) results, the formula of the nanofibers was tentatively given and a possible growth mechanism of the nanofibers was proposed. Because of the low affinity between the coatings and the small water droplet, when using these coatings as substrate for collecting water vapor, the harvesting efficiency could be enhanced as compared with those from bare glass substrate for more than 50% under 25 degrees C and 60-90% relative humidity. By removing the surface methyl group by heat treatment or ultraviolet (UV) irradiation, the as-prepared perfectly hydrophobic surface can be converted into a superhydrophilic surface.

Dye-Sensitized Solar Cells with a High Absorptivity Ruthenium Sensitizer Featuring a 2-(Hexylthio)thiophene Conjugated Bipyridine

We conjugated 2-(hexylthio)thiophene with bipyridine to construct a new heteroleptic polypyridyl ruthenium sensitizer exhibiting a charge-transfer band at 550 nm with a molar extinction coefficient of 18.7 x 10(3) M-1 cm(-1). In contrast to its analogues Z907 and C101, a mesoporous titania film stained with this new sensitizer featured a short light absorption length, allowing for the use of a thin photoactive layer for efficient light-harvesting and conversion of solar energy to electricity. With a preliminary testing, we have reached 11.4% overall power conversion efficiency measured at the air mass 1.5 global conditions. Transient photoelectrical decays and electrical impedance spectra were analyzed to picture the intrinsic physics of temperature-dependent photovoltage and photocurrent.

An Extremely High Molar Extinction Coefficient Ruthenium Sensitizer in Dye-Sensitized Solar Cells: The Effects of pi-Conjugation Extension

We report a heteroleptic ruthenium complex (007) featuring the electron-rich 5-octyl-2,2'-bis(3,4-ethylenedioxythiophene) moiety conjugated with 2,2-bipyridine and exhibiting 10.7% power conversion efficiency measured at the AM1.5G conditions, thanks to the enhanced light-harvesting that is closely related to photocurrent. This C107 sensitizer has an extremely high molar extinction coefficient,of 27.4 x 10(3) M-1 cm(-1) at 559 nm in comparison to its analogue C103 (20.5 x 10(3) M-1 cm(-1) at 550 nm) or Z907 (12.2 x 10(3) M(-1)cm(-1) at 521 nm) with the corresponding 5-hexyl-3,4-ethylenedioxythiopliene- or nonyl-substituted bipyridyl unit. The augmentation of molar extinction coefficients and the bathochromic shift of low-energy absorption peaks along with the pi-conjugation extension are detailed by TD-DFT calculations. The absorptivity of mesoporous titania films grafted with Z907, C103, or C107 sublinearly increases with the molar extinction coefficient of sensitizers, which is consistent with the finding derived from the surface coverage measurements that the packing density of those sensitizers decreases with the geometric enlargement of ancillary ligands.

Efficient multilayer white polymer light-emitting diodes with aluminum cathodes

Efficient multilayer white polymer light-emitting diodes (WPLEDs) with aluminum cathodes are fabricated. The multilayer structure is composed of a water soluble hole-injection layer, a toluene-soluble emissive layer, and an alcohol-soluble emissive layer. The polarity difference of the solvents used for spin coating these polymers allows for realization of the multilayer polymer structure. The recombination zone confined at the interface of the two emissive polymers avoids exciton quenching by electrodes, and white emission is realized by harvesting photons emitted from the two emissive polymers. A maximum luminous efficiency of 16.9 cd/A and a power efficiency of 11.1 lm/W are achieved for this WPLED.

Developing Porphyra/salmon integrated aquaculture for bioremediation and diversification of the aquaculture industry

FUNCTIONAL-FORM GROUPS; RED ALGAE; ATLANTIC SALMON; NEW-HAMPSHIRE; NITROGEN; PHOSPHORUS; RHODOPHYTA; TEMPERATURE; NUTRIENTS; KJELLMAN