Testing kin selection with sex allocation data in eusocial hymenoptera

Sex allocation data in eusocial Hymenoptera (ants, bees and wasps) provide an excellent opportunity to assess the effectiveness of kin selection, because queens and workers differ in their relatedness to females and males. The first studies on sex allocation in eusocial Hymenoptera compared population sex investment ratios across species. Female-biased investment in monogyne (= with single-queen colonies) populations of ants suggested that workers manipulate sex allocation according to their higher relatedness to females than males (relatedness asymmetry). However, several factors may confound these comparisons across species. First, variation in relatedness asymmetry is typically associated with major changes in breeding system and life history that may also affect sex allocation. Secondly, the relative cost of females and males is difficult to estimate across sexually dimorphic taxa, such as ants. Thirdly, each species in the comparison may not represent an independent data point, because of phylogenetic relationships among species. Recently, stronger evidence that workers control sex allocation has been provided by intraspecific studies of sex ratio variation across colonies. In several species of eusocial Hymenoptera, colonies with high relatedness asymmetry produced mostly females, in contrast to colonies with low relatedness asymmetry which produced mostly males. Additional signs of worker control were found by investigating proximate mechanisms of sex ratio manipulation in ants and wasps. However, worker control is not always effective, and further manipulative experiments will be needed to disentangle the multiple evolutionary factors and processes affecting sex allocation in eusocial Hymenoptera.

Ecological Data of Travassosnema travassosi travassosi (Dracunculoidea: Guyanemidae) from the Humour of the Eyes of Acestrorhynchus lacustris from Tibagi River, Paraná, Brazil

Data obtained between 1990 and 1995 provide, for the first time, ecological information of the parasitic nematode Travassosnema travassosi travassosi Costa, Moreira & Oliveira, 1991 from Acestrorhynchus lacustris (Characiformes: Acestrorhynchidae) collected in the Tibagi River, Sertanópolis, Paraná, Brazil. These nematode occurred with low prevalences (7.7% to 28.6%) and intensities (1 to 3) during almost the whole year. The observation of mature females throughout the year indicate that liberation of larvae can occur during all the year around. This is the first report on the occurrence of T. travassosi travassosi inside the eyes. These nematodes were mostly located in humour of the eyes (87% of cases), being less frequently detected in tissues behind the eyes (13% of cases).

Carcinomes canalaires in situ: données anatomo-pathologiques actuelles [Ductal carcinoma in situ: current anatomo-pathologic data]

Ductal carcinoma in situ (DCIS), accounting for 15-25% of all breast cancers, is frequently diagnosed by mammographic examination. This heterogeneous disease requires a rigorous local treatment based, in about two-third of cases, on conservative surgery and radiotherapy. DCIS are currently classified on the basis of nuclear grade. Most lesions, and especially high nuclear grade DCIS, are limited to one quadrant. Micropapillary DCIS are likely to be of larger size/extent and thus a conservative approach is often difficult. A careful pathological examination of an oriented excisional biopsy is a pre-requisite for optimal therapy.

Multiple-scale hydrological and geophysical data integration through non-linear Bayesian sequential simulation

Significant progress has been made with regard to the quantitative integration of geophysical and hydrological data at the local scale. However, extending the corresponding approaches to the scale of a field site represents a major, and as-of-yet largely unresolved, challenge. To address this problem, we have developed downscaling procedure based on a non-linear Bayesian sequential simulation approach. The main objective of this algorithm is to estimate the value of the sparsely sampled hydraulic conductivity at non-sampled locations based on its relation to the electrical conductivity logged at collocated wells and surface resistivity measurements, which are available throughout the studied site. The in situ relationship between the hydraulic and electrical conductivities is described through a non-parametric multivariatekernel density function. Then a stochastic integration of low-resolution, large-scale electrical resistivity tomography (ERT) data in combination with high-resolution, local-scale downhole measurements of the hydraulic and electrical conductivities is applied. The overall viability of this downscaling approach is tested and validated by comparing flow and transport simulation through the original and the upscaled hydraulic conductivity fields. Our results indicate that the proposed procedure allows obtaining remarkably faithful estimates of the regional-scale hydraulic conductivity structure and correspondingly reliable predictions of the transport characteristics over relatively long distances.

Meta-analysis of genome-wide association data identifies a risk locus for major mood disorders on 3p21.1.

The major mood disorders, which include bipolar disorder and major depressive disorder (MDD), are considered heritable traits, although previous genetic association studies have had limited success in robustly identifying risk loci. We performed a meta-analysis of five case-control cohorts for major mood disorder, including over 13,600 individuals genotyped on high-density SNP arrays. We identified SNPs at 3p21.1 associated with major mood disorders (rs2251219, P = 3.63 x 10(-8); odds ratio = 0.87; 95% confidence interval, 0.83-0.92), with supportive evidence for association observed in two out of three independent replication cohorts. These results provide an example of a shared genetic susceptibility locus for bipolar disorder and MDD.

Amplification efficiency: linking baseline and bias in the analysis of quantitative PCR data.

Despite the central role of quantitative PCR (qPCR) in the quantification of mRNA transcripts, most analyses of qPCR data are still delegated to the software that comes with the qPCR apparatus. This is especially true for the handling of the fluorescence baseline. This article shows that baseline estimation errors are directly reflected in the observed PCR efficiency values and are thus propagated exponentially in the estimated starting concentrations as well as 'fold-difference' results. Because of the unknown origin and kinetics of the baseline fluorescence, the fluorescence values monitored in the initial cycles of the PCR reaction cannot be used to estimate a useful baseline value. An algorithm that estimates the baseline by reconstructing the log-linear phase downward from the early plateau phase of the PCR reaction was developed and shown to lead to very reproducible PCR efficiency values. PCR efficiency values were determined per sample by fitting a regression line to a subset of data points in the log-linear phase. The variability, as well as the bias, in qPCR results was significantly reduced when the mean of these PCR efficiencies per amplicon was used in the calculation of an estimate of the starting concentration per sample.

Gene expression databases and data mining.

The DNA microarray technology has arguably caught the attention of the worldwide life science community and is now systematically supporting major discoveries in many fields of study. The majority of the initial technical challenges of conducting experiments are being resolved, only to be replaced with new informatics hurdles, including statistical analysis, data visualization, interpretation, and storage. Two systems of databases, one containing expression data and one containing annotation data are quickly becoming essential knowledge repositories of the research community. This present paper surveys several databases, which are considered "pillars" of research and important nodes in the network. This paper focuses on a generalized workflow scheme typical for microarray experiments using two examples related to cancer research. The workflow is used to reference appropriate databases and tools for each step in the process of array experimentation. Additionally, benefits and drawbacks of current array databases are addressed, and suggestions are made for their improvement.

Coronary MR angiography: comparison of quantitative and qualitative data from four techniques.

OBJECTIVE: The optimal coronary MR angiography sequence has yet to be determined. We sought to quantitatively and qualitatively compare four coronary MR angiography sequences. SUBJECTS AND METHODS. Free-breathing coronary MR angiography was performed in 12 patients using four imaging sequences (turbo field-echo, fast spin-echo, balanced fast field-echo, and spiral turbo field-echo). Quantitative comparisons, including signal-to-noise ratio, contrast-to-noise ratio, vessel diameter, and vessel sharpness, were performed using a semiautomated analysis tool. Accuracy for detection of hemodynamically significant disease (> 50%) was assessed in comparison with radiographic coronary angiography. RESULTS: Signal-to-noise and contrast-to-noise ratios were markedly increased using the spiral (25.7 +/- 5.7 and 15.2 +/- 3.9) and balanced fast field-echo (23.5 +/- 11.7 and 14.4 +/- 8.1) sequences compared with the turbo field-echo (12.5 +/- 2.7 and 8.3 +/- 2.6) sequence (p < 0.05). Vessel diameter was smaller with the spiral sequence (2.6 +/- 0.5 mm) than with the other techniques (turbo field-echo, 3.0 +/- 0.5 mm, p = 0.6; balanced fast field-echo, 3.1 +/- 0.5 mm, p < 0.01; fast spin-echo, 3.1 +/- 0.5 mm, p < 0.01). Vessel sharpness was highest with the balanced fast field-echo sequence (61.6% +/- 8.5% compared with turbo field-echo, 44.0% +/- 6.6%; spiral, 44.7% +/- 6.5%; fast spin-echo, 18.4% +/- 6.7%; p < 0.001). The overall accuracies of the sequences were similar (range, 74% for turbo field-echo, 79% for spiral). Scanning time for the fast spin-echo sequences was longest (10.5 +/- 0.6 min), and for the spiral acquisitions was shortest (5.2 +/- 0.3 min). CONCLUSION: Advantages in signal-to-noise and contrast-to-noise ratios, vessel sharpness, and the qualitative results appear to favor spiral and balanced fast field-echo coronary MR angiography sequences, although subjective accuracy for the detection of coronary artery disease was similar to that of other sequences.

Machine learning algorithms for spatial data. Case studies: Environmental pollution, natural hazards, renewable resources

This paper presents general problems and approaches for the spatial data analysis using machine learning algorithms. Machine learning is a very powerful approach to adaptive data analysis, modelling and visualisation. The key feature of the machine learning algorithms is that they learn from empirical data and can be used in cases when the modelled environmental phenomena are hidden, nonlinear, noisy and highly variable in space and in time. Most of the machines learning algorithms are universal and adaptive modelling tools developed to solve basic problems of learning from data: classification/pattern recognition, regression/mapping and probability density modelling. In the present report some of the widely used machine learning algorithms, namely artificial neural networks (ANN) of different architectures and Support Vector Machines (SVM), are adapted to the problems of the analysis and modelling of geo-spatial data. Machine learning algorithms have an important advantage over traditional models of spatial statistics when problems are considered in a high dimensional geo-feature spaces, when the dimension of space exceeds 5. Such features are usually generated, for example, from digital elevation models, remote sensing images, etc. An important extension of models concerns considering of real space constrains like geomorphology, networks, and other natural structures. Recent developments in semi-supervised learning can improve modelling of environmental phenomena taking into account on geo-manifolds. An important part of the study deals with the analysis of relevant variables and models' inputs. This problem is approached by using different feature selection/feature extraction nonlinear tools. To demonstrate the application of machine learning algorithms several interesting case studies are considered: digital soil mapping using SVM, automatic mapping of soil and water system pollution using ANN; natural hazards risk analysis (avalanches, landslides), assessments of renewable resources (wind fields) with SVM and ANN models, etc. The dimensionality of spaces considered varies from 2 to more than 30. Figures 1, 2, 3 demonstrate some results of the studies and their outputs. Finally, the results of environmental mapping are discussed and compared with traditional models of geostatistics.