Efficacy of several digital radiographic imaging systems for laboratory determination of endodontic file length

P>AimTo compare the efficacy of different digital radiographic imaging systems for determining the length of endodontic files.MethodologyK-type endodontic files were introduced into the canals of 40 extracted human permanent single-rooted teeth and fixed in place at random lengths. The teeth were radiographed using Digora Optime (R), CygnusRay MPS (R) and CDR Wireless (R) digital imaging systems. Six observers measured every file length in all the images and repeated this procedure in 50% of the image samples, and assigned a score to the level of difficulty found. Analysis of variance for differences between digital systems and Tukey's test were performed. The level of intraobserver agreement was measured by intraclass correlation. The assigned scores were evaluated by Kruskal-Wallis and Dunn's tests.ResultsThe CDR Wireless values did not differ significantly from the actual lengths and the CygnusRay MPS values. The Digora Optime system was significantly different from the others and overestimated the values (P < 0.05). The Digora Optime was significantly easier to use for taking measurements and the CygnusRay MPS the most difficult (P < 0.05). All digital radiographic imaging systems showed excellent agreement with the Intraclass Correlation Coefficient > 0.95.ConclusionsThe three digital radiographic imaging systems were precise. The CDR Wireless system was significantly more accurate in determining endodontic file lengths, and similarly to Digora Optime, was considered the least difficult to use when assessing endodontic file lengths.

Comparative study on the effect of ultrasonic instruments on the root surface in vivo

The present study was designed to investigate the effectiveness of different ultrasonic instruments on the root surface. Fourteen patients with 35 single root teeth designated for extraction were recruited to the present study. Teeth were assigned to four experimental groups: group 1, piezoelectric ultrasonic device; group 2, magnetostrictive ultrasonic device; group 3, hand instrumentation; and group 4, untreated teeth (control). After instrumentation, the teeth were extracted and the presence of residual deposits (roughness and root surfaces characteristics) were analyzed. The results showed that residual deposits were similar in all tested groups: piezoelectric, 8.7%; magnetostrictive, 9.7%; hand instrumentation, 11.1% and control, 76.4%. There were statistically significant differences between control and all the experimental groups (p < 0.0001). With respect to roughness parameters evaluation, R(a) and R(z) of the roots treated with the different instruments showed a similar pattern (p > 0.05), but for R(t) and R(y), a significant difference was observed (p < 0.05) among hand instrumentation and ultrasonic devices. SEM analysis revealed a similar root surface pattern for the ultrasonic devices, but curettes showed many instrumental scratches, deep gouges, and a relatively large amount of dentin was removed. Within the limits of the study, although the instruments produced similar results, root surfaces instrumentated with curettes were rougher and had more root surface tissue removed than with the ultrasonic device.

Efficacy of NiTi rotary instruments in removing calcium hydroxide dressing residues from root canal walls

The aim of this study was to evaluate the efficacy of three rotary instrument systems (K3, ProTaper and Twisted File) in removing calcium hydroxide residues from root canal walls. Thirty-four human mandibular incisors were instrumented with the ProTaper System up to the F2 instrument, irrigated with 2.5% NaOCl followed by 17% EDTA, and filled with a calcium hydroxide intracanal dressing. After 7 days, the calcium hydroxide dressing was removed using the following rotary instruments: G1 - NiTi size 25, 0.06 taper, of the K3 System; G2 - NiTi F2, of the ProTaper System; or G3 - NiTi size 25, 0.06 taper, of the Twisted File System. The teeth were longitudinally grooved on the buccal and lingual root surfaces, split along their long axis, and their apical and cervical canal thirds were evaluated by SEM (×1000). The images were scored and the data were statistically analyzed using the Kruskall Wallis test. None of the instruments removed the calcium hydroxide dressing completely, either in the apical or cervical thirds, and no significant differences were observed among the rotary instruments tested (p > 0.05).

Flexibility and Torsional Strength of ProTaper and ProTaper Universal Rotary Instruments Assessed by Mechanical Tests

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Ability of Different Nickel-Titanium Rotary Instruments To Induce Dentinal Damage During Canal Preparation

The purpose of this study was to compare the incidence of dentinal defects (fractures and craze lines) after canal preparation with different nickel-titanium rotary files. Two hundred sixty mandibular premolars were selected. Forty teeth were left unprepared (n = 40). The other teeth were prepared either with manual Flexofiles (n = 20) or with different rotary files systems: ProTaper (Dentsply-Maillefer, Ballaigues, Switzerland), ProFile (Dentsply-Maillefer), SystemGT (Dentsply-Maillefer), or S-ApeX (FKG Dentaire, La Chaux-de-Fonds, Switzerland) (n = 50 each). Roots were then sectioned 3, 6, and 9 mm from the apex and observed under a microscope. The presence of dentinal defects was noted. There was a significant difference in the appearance of defects between the groups (p < 0.05). No defects were found in the unprepared roots and those prepared with hand files and S-ApeX. ProTaper, ProFile, and GT preparations resulted in dentinal defects in 16%, 8%, and 4% of teeth, respectively. Some endodontic preparation methods might damage the root and induce dentinal defects. (J Endod 2009;35:236-238)

Stochastic dynamics in exotic and native blowflies: an analysis combining laboratory experiments and a two-patch metapopulation model

In this study we explored the stochastic population dynamics of three exotic blowfly species, Chrysomya albiceps, Chrysomya megacephala and Chrysomya putoria, and two native species, Cochliomyia macellaria and Lucilia eximia, by combining a density-dependent growth model with a two-patch metapopulation model. Stochastic fecundity, survival and migration were investigated by permitting random variations between predetermined demographic boundary values based on experimental data. Lucilia eximia and Chrysomya albiceps were the species most susceptible to the risk of local extinction. Cochliomyia macellaria, C. megacephala and C. putoria exhibited lower risks of extinction when compared to the other species. The simultaneous analysis of stochastic fecundity and survival revealed an increase in the extinction risk for all species. When stochastic fecundity, survival and migration were simulated together, the coupled populations were synchronized in the five species. These results are discussed, emphasizing biological invasion and interspecific interaction dynamics.

Post-larval morphology, growth, and development of Uca cumulanta Crane, 1943 (Crustacea, Decapoda, Ocypodidae) under laboratory conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Postlarval stages and growth patterns of the spider crab Pyromaia tuberculata (Brachyura, Majidae) from laboratory-reared material

The spider crab Pyromaia tuberculata was introduced into southeastern Brazil; ovigerous material was collected and reared in the laboratory. Morphologic changes and growth patterns of post-larval development are reported. Results show that within-stage size variation is lowest in mature stages, especially in the case of females in which there is an apparent size threshold for the last juvenile stages to undergo the puberty molt. A prepuberty molt taking place at the fourth crab stage is indicated by analyzing the allometric growth of the abdomen in females. In contrast, the same procedure using the allometric growth of chelae failed in detecting both the prepuberty and puberty molts in males. Conversely to females, which develop a complex brood chamber at the puberty molt, the enlargement of chelae was not consistent in all postpuberty males. The short instar sequence of this species, in no case exceeding nine stages, is marked by conspicuous morphologic alterations achieved at each molt. Almost all stages can be identified by examining diagnostic features of rostrum, abdomen, sternum, and pleopods.

Juvenile development and growth patterns in the mud crab Eurytium limosum (Say, 1818) (Decapoda, Brachyura, Xanthidae) under laboratory conditions

The post-larval development of the mud crab Eurytium limosum was studied under laboratory conditions by using the offspring of ovigerous females collected at the Comprido River mangrove, SP, Brazil. The first crab stage is fully described and the juvenile development, until crab stage 10, is examined with emphasis on morphological change, sexual differentiation and growth patterns. The carapace of the first crab stage is nearly square as observed in other xanthids, becoming similar to adults only at stage 15. The sexes can be distinguished from stage four, based on the number of pleopods and their morphology. While the intermoult period increases, the moult percentage decreases at each stage. The abdominal allometric growth is sex-dependent, with males showing a negative (b=0.71) and females an isometric (b=0.95) relative growth pattern. Male gonopods undergo a positive allometric growth, and their shape changes remarkably until sexual maturity. The cheliped dentition can be observed after stage 4. Regardless of sex, most crabs have a molariform right cheliped, which is thought to aid the handling of asymmetric prey such as gastropods.

Growth rate of the crab Dissodactylus crinitichelis Moreira, 1901 (Crustacea : Decapoda : Pinnotheroidea) under laboratory conditions

The goal of the present study was to investigate the growth rate of the crab Dissodactylus crinitiehelis, its molt increments, and the duration of the intermolt intervals under laboratory conditions, focusing on differences between sexes and between juvenile and adult phases. Crabs were collected at Flamengo Beach, Ubatuba, São Paulo State, Brazil, by scuba divers. In the laboratory, individuals were maintained in isolation and fed nauplii of Artemia sp. daily. The sex and carapace width of exuviae and dead crabs were recorded. During the juvenile phase, mean growth was 11.8 +/- 2.7% in males and 11.2 +/- 3.6% in females, with their respective intermolt intervals 25.4 +/- 9.2 and 26.4 +/- 8.3 d (mean +/- SD). After reaching morphological sexual maturity, the intermolt intervals increased to 33.4 10.1 d in males and 32.7 +/- 10.4 d in females, and the growth rates of both sexes slowed to 6.4 +/- 1.9% in males and 5.7 +/- 1.6% in females. There was a significant decrease in molt increment and an increase in intermolt intervals associated with the maturation from juveniles to adults, evidencing differential energy allocation during the last phase of ontogeny.

A laboratory study on feeding plasticity of the shredder Sericostoma vittatum Rambur (Sericostomatidae)

Since litter input and availability of leaves in many streams is highly seasonal in Portugal, we investigated whether Sericostoma vittatum, a typical shredder, was able to grow using alternative food sources. To test this hypothesis we fed S. vittatum with Alnus glutinosa (alder, CPOM, coarse particulate organic matter), leaf powder from A. glutinosa and Acacia dealbata and FPOM (fine particulate organic matter) from a 5th and a > 6th order river, the macrophyte Myriophyllum aquaticum and biofilm. Growth in S. vittatum was significantly influenced by the food item given (ANOVA, P = 0.0082). The food item promoting the highest growth was A. glutinosa, in the form of FPOM (6.48% day(-1)) and CPOM (4.24% day(-1)); all other forms of FPOM and biofilm provided relatively low growth rates (0.77-1.77% day(-1)). The macrophyte M. aquaticum was also used as food source by S. vittatum and promoted intermediate growth (1.96% day(-1)). Neither nitrogen, phosphorus nor caloric content was correlated with growth. However, since higher growth was achieved with alder, in the form of CPOM and FPOM, we concluded that the chemical content of food was more important for S. vittatum than the physical form of such food. This may partially explain why shredders are able to survive when leaves are scarce in streams.

The first zoeal stage of the genus Cronius (Brachyura, Portunidae) from the Brazilian coast, hatched in a laboratory

This study describes the first zoeal stage of Cronius ruber and Cronius tumidulus. The zoeae can be distinguished using the setation of the cephalic appendages and the lateral process on the abdominal somite.

Larval development of Apiomithrax violaceus (A. Milne Edwards, 1868) (Decapoda : Brachyura : Majoidea : Pisidae) reared in laboratory conditions, and a review of larval characters of Pisidae

Apiomithrax violaceus (A. Milne Edwards, 1868 ) is a pisid majoid crab occurring in tropical and subtropical coastal waters of the eastern and western South Atlantic. Larval development consists of two zoeal stages and a megalopa. Beginning with the first zoea, the duration of each larval stage at 24degreesC was 3-8 (5+/-1), 3-5 (4+/-0.5) and 9-15 (11+/-2) days, the megalopa and first crab instar appearing 9-11 (10+/-1) and 20-27 (23+/-2) days after hatching, respectively. Larval characters agree with those proposed for the Majoidea, in having nine or more setae on the scaphognathite in the first zoea and well-developed pleopods in the second zoea. However, larvae of A . violaceus do not fit larval pisid features. Zoeal stages differ from most other Pisidae in having lateral spines, a long rostral spine extending beyond the antenna, two spines per telson fork and a dorsolateral process on the third abdominal somite. The megalopa differs in having a spine dorsally on the carapace and on the basial segment of the second pereiopod. Two characters that are potentially unique to Apiomithrax include a zoeal antenna with an exopod that is much longer than the protopod, and a rostral spine that is longer than the dorsal spine. These characters should facilitate the identification of this taxon and could also be useful for phylogenetic studies. A review of larvae of 28 species among 14 genera indicated that there is no apparent single larval character that differentiates the Pisidae, with more limited phylogenetic analyses suggesting that this is a paraphyletic group. Apiomithrax , Eurynolambrus , Pisoides , Rochinia and Scyra have the most divergent morphological characters within the family. The analysis and inclusion of additional taxa is likely to shed more light on the sister-group relationships of the Pisidae. However, based on the extent of morphological interspecific variability of known larvae it is likely that the group, as presently defined by adult morphology, is not monophyletic.