Study of Type 'A' Asphaltic Concrete Surface Mix Design, R-232, 1968

In some asphaltic concrete mixes asphalt absorption in field mixes is difficult to predict by the routine mix design tests presently being used. Latent or slow absorption in hot mixes is hard to compensate for in field control due to aggregate gradations being near maximum density. If critical asphalt need could be changed by increasing voids in the mineral aggregate so that more freedom could be exercised in compensating for the absorption, this may aid in design. The voids in the mineral aggregate can be related to composite gradation of total aggregate in a mixture, i.e. if a composite gradation of aggregate is finer than that of maximum density curve, the V.M.A. will be greater than that of a mix of maximum density. The typical gradation of Iowa Type 'A' mixes is finer than a gradation which is near the centerline of the specification at sieves larger than the No. 30 and coarser at the lower sieve sizes. The mixes of the typical gradation will have higher V.M.A. than those of the near centerline mixes. By studying properties of the mixes of the typical gradation and comparing them with those of the mixes of maximum density, it may aid in the modification and simplification of our present testing methods and specification requirements while still maintaining control of quality of the mix by controlling voids, stability, gradation and asphalt content.

History and Design of Iowa's Highway Maintenance and Weighing Facilities, 2003

In June 2001, the Iowa Department of Transportation announced the imminent closure and disposal of selected highway maintenance facilities as part of cost-cutting measures mandated by the Iowa legislature, an action that was to be completed by July 31, 2001. The DOT recognized that some of these facilities might be "historical sites," which in the Iowa Code are defined as any district, site, building or structure listed on the National Register of Historic Places or identified as eligible for listing in the National Register by the State Historic Preservation Office. Section 303 of the Code requires state agencies to "enter into an agreement with the Department of Cultural Affairs [in which the SHPO is located] to ensure the proper management, maintenance and development of historical sites." The DOT saw this disposal action as an opportunity to compile information about its highway maintenance facilities that could be employed in development of a management program for historic highway maintenance facilities in the future. Subsequently, the DOT authorized a similar study of highway weigh stations.

Structural Analysis and Overlay Design of Pavements Using the Road Rater, MLR-84-3, 1986

In recent years the Iowa DOT has shifted emphasis from the construction of new roads to the maintenance and preservation of existing highways. A need has developed for analyzing pavements structurally to select the correct rehabilitation strategy and to properly design a pavement overlay if necessary. This need has been fulfilled by Road Rater testing which has been used successfully on all types of pavements to evaluate pavement and subgrade conditions and to design asphaltic concrete overlays. The Iowa Road Rater Design Method has been simplified so that it may be easily understood and used by the widely diverse groups of individuals which may be involved in pavement restoration and management. Road Rater analysis techniques have worked well to date and have been verified by pavement coring, soils sampling and testing, and pavement removal by block sampling. Void detection testing has also been performed experimentally in Iowa, and results indicate that the Road Rater can be used to locate pavement voids and that Road Rater analysis techniques are reasonably accurate. The success of Road Rater research and development has made deflection test data one of the most important pavement management inputs.

Local Public-Services Provision under Public-Private Partnerships : Contractual Design and Contracting Parties Incentives

When deciding to resort to a PPP contract for the provision of a local public service, local governments have to consider the demand risk allocation between the contracting parties. In this article, I investigate the effects of demand risk allocation on the accountability of procuring authorities regarding consumers changing demand, as well as on the cost-reducing effort incentives of the private public-service provider. I show that contracts in which the private provider bears demand risk motivate more the public authority from responding to customer needs. This is due to the fact that consumers are empowered when the private provider bears demand risk, that is, they have the possibility to oust the private provider in case of non-satisfaction with the service provision, which provides procuring authorities with more credibility in side-trading and then more incentives to be responsive. As a consequence, I show that there is a lower matching with consumers' preferences over time when demand risk is on the public authority rather than on the private provider, and this is corroborated in the light of two famous case studies. However, contracts in which the private provider does not bear demand risk motivate more the private provider from investing in cost-reducing efforts. I highlight then a tradeoff in the allocation of demand risk between productive and allocative efficiency. The striking policy implication of this article for local governments would be that the current trend towards a greater resort to contracts where private providers bear little or no demand risk may not be optimal. Local governments should impose demand risk on private providers within PPP contracts when they expect that consumers' preferences over the service provision will change over time.

Unlicensed and off-label drug use in a Swiss paediatric university hospital.

BACKGROUND: Many medicines used in newborns, infants, children and adolescents are not licensed ("unlicensed") or are prescribed outside the terms of the marketing authorization ("off-label"). Several studies have shown that this is a common practice in various healthcare settings in the USA, Europe and Australia, but data are scarce in Switzerland. OBJECTIVES: The aim of our prospective study was to determine the proportion of unlicensed or off-label prescriptions in paediatric patients. METHODS: This pilot study was conducted prospectively over a six month period in the department of paediatrics of a university hospital. RESULTS: Sixty patients aged from three days to 14 years were included in the study. A total of 483 prescriptions were written for the patients. More than half of all prescriptions (247; 51%) followed the terms of the marketing authorization. 114 (24%) were unlicensed and 122 (25%) off-label. All patients received at least one unlicensed or offlabel medicine. CONCLUSION: The use of unlicensed or off-label medicines to treat children was found to be common. Co-operation between the pharmaceutical industry, national regulatory authorities, clinical researchers, healthcare professionals and parents is required in order to ensure that children do not remain "therapeutic orphans".

Learning from failure - rationale and design for a study about discontinuation of randomized trials (DISCO study).

BACKGROUND: Randomized controlled trials (RCTs) may be discontinued because of apparent harm, benefit, or futility. Other RCTs are discontinued early because of insufficient recruitment. Trial discontinuation has ethical implications, because participants consent on the premise of contributing to new medical knowledge, Research Ethics Committees (RECs) spend considerable effort reviewing study protocols, and limited resources for conducting research are wasted. Currently, little is known regarding the frequency and characteristics of discontinued RCTs. METHODS/DESIGN: Our aims are, first, to determine the prevalence of RCT discontinuation for specific reasons; second, to determine whether the risk of RCT discontinuation for specific reasons differs between investigator- and industry-initiated RCTs; third, to identify risk factors for RCT discontinuation due to insufficient recruitment; fourth, to determine at what stage RCTs are discontinued; and fifth, to examine the publication history of discontinued RCTs.We are currently assembling a multicenter cohort of RCTs based on protocols approved between 2000 and 2002/3 by 6 RECs in Switzerland, Germany, and Canada. We are extracting data on RCT characteristics and planned recruitment for all included protocols. Completion and publication status is determined using information from correspondence between investigators and RECs, publications identified through literature searches, or by contacting the investigators. We will use multivariable regression models to identify risk factors for trial discontinuation due to insufficient recruitment. We aim to include over 1000 RCTs of which an anticipated 150 will have been discontinued due to insufficient recruitment. DISCUSSION: Our study will provide insights into the prevalence and characteristics of RCTs that were discontinued. Effective recruitment strategies and the anticipation of problems are key issues in the planning and evaluation of trials by investigators, Clinical Trial Units, RECs and funding agencies. Identification and modification of barriers to successful study completion at an early stage could help to reduce the risk of trial discontinuation, save limited resources, and enable RCTs to better meet their ethical requirements.

Concrete Pavement Mixture Design and Analysis (MDA): Factors Influencing Drying Shrinkage, TPF-5(205), 2014

This literature review focuses on factors influencing drying shrinkage of concrete. Although the factors are normally interrelated, they can be categorized into three groups: paste quantity, paste quality, and other factors.

Subsidy design: wealth versus benefits

A government would like to subsidize an indivisible good. Consumers' valuations of the good vary according to their wealth and benefits from the good. A subsidy scheme may be based on consumers' wealth or benefit information. We translate a wealth-based policy to a benefit-based policy, and vice versa, and give a necessary and sufficient condition for the pair of policies to implement the same assignment: consumers choose to purchase the good under the wealth-based policy if and only if they choose to do so under the translated benefit-based policy. General taxation allows equivalent policies to require the same budget.

A design science approach to support the assessment of disruptive technology : the Swiss mobile payment case

Abstract In this thesis we present the design of a systematic integrated computer-based approach for detecting potential disruptions from an industry perspective. Following the design science paradigm, we iteratively develop several multi-actor multi-criteria artifacts dedicated to environment scanning. The contributions of this thesis are both theoretical and practical. We demonstrate the successful use of multi-criteria decision-making methods for technology foresight. Furthermore, we illustrate the design of our artifacts using build and-evaluate loops supported with a field study of the Swiss mobile payment industry. To increase the relevance of this study, we systematically interview key Swiss experts for each design iteration. As a result, our research provides a realistic picture of the current situation in the Swiss mobile payment market and reveals previously undiscovered weak signals for future trends. Finally, we suggest a generic design process for environment scanning.

Computer-Aided Business Model Design

There is a lack of dedicated tools for business model design at a strategic level. However, in today's economic world the need to be able to quickly reinvent a company's business model is essential to stay competitive. This research focused on identifying the functionalities that are necessary in a computer-aided design (CAD) tool for the design of business models in a strategic context. Using design science research methodology a series of techniques and prototypes have been designed and evaluated to offer solutions to the problem. The work is a collection of articles which can be grouped into three parts: First establishing the context of how the Business Model Canvas (BMC) is used to design business models and explore the way in which CAD can contribute to the design activity. The second part extends on this by proposing new technics and tools which support elicitation, evaluation (assessment) and evolution of business models design with CAD. This includes features such as multi-color tagging to easily connect elements, rules to validate coherence of business models and features that are adapted to the correct business model proficiency level of its users. A new way to describe and visualize multiple versions of a business model and thereby help in addressing the business model as a dynamic object was also researched. The third part explores extensions to the business model canvas such as an intermediary model which helps IT alignment by connecting business model and enterprise architecture. And a business model pattern for privacy in a mobile environment, using privacy as a key value proposition. The prototyped techniques and proposition for using CAD tools in business model modeling will allow commercial CAD developers to create tools that are better suited to the needs of practitioners.

Bortezomib(Velcade®)-Thalidomide-Dexamethasone (VTD) Is Superior to Thalidomide-Dexamethasone (TD) In Patients with Multiple Myeloma (MM) Progressing or Relapsing After Autologous Transplantation

Introduction: The Thalidomide-Dexamethasone (TD) regimen has provided encouraging results in relapsed MM. To improve results, bortezomib (Velcade) has been added to the combination in previous phase II studies, the so called VTD regimen. In January 2006, the European Group for Blood and Marrow Transplantation (EBMT) and the Intergroupe Francophone du Myélome (IFM) initiated a prospective, randomized, parallel-group, open-label phase III, multicenter study, comparing VTD (arm A) with TD (arm B) for MM patients progressing or relapsing after autologous transplantation. Patients and Methods: Inclusion criteria: patients in first progression or relapse after at least one autologous transplantation, including those who had received bortezomib or thalidomide before transplant. Exclusion criteria: subjects with neuropathy above grade 1 or non secretory MM. Primary study end point was time to progression (TTP). Secondary end points included safety, response rate, progression-free survival (PFS) and overall survival (OS). Treatment was scheduled as follows: bortezomib 1.3 mg/m2 was given as an i.v bolus on Days 1, 4, 8 and 11 followed by a 10-Day rest period (days 12 to 21) for 8 cycles (6 months) and then on Days 1, 8, 15, 22 followed by a 20-Day rest period (days 23 to 42) for 4 cycles (6 months). In both arms, thalidomide was scheduled at 200 mg/Day orally for one year and dexamethasone 40 mg/Day orally four days every three weeks for one year. Patients reaching remission could proceed to a new stem cell harvest. However, transplantation, either autologous or allogeneic, could only be performed in patients who completed the planned one year treatment period. Response was assessed by EBMT criteria, with additional category of near complete remission (nCR). Adverse events were graded by the NCI-CTCAE, Version 3.0.The trial was based on a group sequential design, with 4 planned interim analyses and one final analysis that allowed stopping for efficacy as well as futility. The overall alpha and power were set equal to 0.025 and 0.90 respectively. The test for decision making was based on the comparison in terms of the ratio of the cause-specific hazards of relapse/progression, estimated in a Cox model stratified on the number of previous autologous transplantations. Relapse/progression cumulative incidence was estimated using the proper nonparametric estimator, the comparison was done by the Gray test. PFS and OS probabilities were estimated by the Kaplan-Meier curves, the comparison was performed by the Log-Rank test. An interim safety analysis was performed when the first hundred patients had been included. The safety committee recommended to continue the trial. Results: As of 1st July 2010, 269 patients had been enrolled in the study, 139 in France (IFM 2005-04 study), 21 in Italy, 38 in Germany, 19 in Switzerland (a SAKK study), 23 in Belgium, 8 in Austria, 8 in the Czech republic, 11 in Hungary, 1 in the UK and 1 in Israel. One hundred and sixty nine patients were males and 100 females; the median age was 61 yrs (range 29-76). One hundred and thirty six patients were randomized to receive VTD and 133 to receive TD. The current analysis is based on 246 patients (124 in arm A, 122 in arm B) included in the second interim analysis, carried out when 134 events were observed. Following this analysis, the trial was stopped because of significant superiority of VTD over TD. The remaining patients were too premature to contribute to the analysis. The number of previous autologous transplants was one in 63 vs 60 and two or more in 61 vs 62 patients in arm A vs B respectively. The median follow-up was 25 months. The median TTP was 20 months vs 15 months respectively in arm A and B, with cumulative incidence of relapse/progression at 2 years equal to 52% (95% CI: 42%-64%) vs 70% (95% CI: 61%-81%) (p=0.0004, Gray test). The same superiority of arm A was also observed when stratifying on the number of previous autologous transplantations. At 2 years, PFS was 39% (95% CI: 30%-51%) vs 23% (95% CI: 16%-34%) (A vs B, p=0.0006, Log-Rank test). OS in the first two years was comparable in the two groups. Conclusion: VTD resulted in significantly longer TTP and PFS in patients relapsing after ASCT. Analysis of response and safety data are on going and results will be presented at the meeting.

Generic brands and product differentiation strategies

Generic or own brand products were initially only lesser expensive copies of the branded label alternative, but nowadays, pricing alone is not enough in order to survive in the Fast Moving Consumer Goods (FMCG) or Consumer Packaged Goods (CPG)markets. With this in mind manufacturers of generic brands have adapted to this rapidlygrowing niche by investing in design and marketing during the initial phase in order to be perceived as having a quality product comparable to that of the branded products. In addition, they have gone further ahead with a second phase and resorted to innovativeproduct differentiation strategies and even pure innovation in many cases. These strategies have granted generic brands constantly increasing market shares and a position of equals relative to national brands.Using previous analyses and case studies, this paper will provide conceptual and empirical evidence to explain the surprisingly fast growth and penetration of generic supermarket brands, which in their relatively short lifespan, have grown to rival the historical market leaders, the branded products. According to this analysis, the main conclusion is that the growth in generic brands can be explained not only by price competition, but also by the use of innovative product differentiation strategies.