Carbon nanotube based cathodes for microwave amplifiers

We have studied two different kinds of electron tubes using a cold field emission cathode as the electron source. This cathode is an array of vertically aligned multiwall carbon nanotubes. The first device is a triode. With this device, we demonstrated the modulation at 32 GHZ of a 1.4 A/cm2 peak current density with a 82% modulation ratio. The second device is a traveling wave tube. For this device, the objective is to test a cathode delivering a 2 A/cm 2 electron beam. ©2009 IEEE.

Carbon nanotube based photocathodes for high frequency amplifiers

The combination of high frequency, high power, high efficiency capabilities is a feature of vacuum tube technology. For most of applications, large bandwidths are required, and therefore the modulation method should also allow large bandwidth operation. Optically modulated cold cathodes, avoiding the use of resonant cavities, should satisfy this requirement. This is the reason why we have developed carbon nanotube based photocathode.© 2009 IEEE.

Model based learning of sigma points in unscented Kalman filtering

The unscented Kalman filter (UKF) is a widely used method in control and time series applications. The UKF suffers from arbitrary parameters necessary for a step known as sigma point placement, causing it to perform poorly in nonlinear problems. We show how to treat sigma point placement in a UKF as a learning problem in a model based view. We demonstrate that learning to place the sigma points correctly from data can make sigma point collapse much less likely. Learning can result in a significant increase in predictive performance over default settings of the parameters in the UKF and other filters designed to avoid the problems of the UKF, such as the GP-ADF. At the same time, we maintain a lower computational complexity than the other methods. We call our method UKF-L. ©2010 IEEE.

A process model based methodology to support conflict management

The product design development has increasingly become a collaborative process. Conflicts often appear in the design process due to multi-actors interactions. Therefore, a critical element of collaborative design would be conflict situations resolution. In this paper, a methodology, based on a process model, is proposed to support conflict management. This methodology deals mainly with the conflict resolution team identification and the solution impact evaluation issues. The proposed process model allows the design process traceability and the data dependencies network identification; which making it be possible to identify the conflict resolution actors as well as to evaluate the selected solution impact. Copyright © 2006 IFAC.

Fabrication and testing of a high resolution extensometer based on resonant MEMS strain sensors

A novel type of linear extensometer with exceptionally high resolution of 4 nm based on MEMS resonant strain sensors bonded on steel and operating in a vacuum package is presented. The tool is implemented by means of a steel thin bar that can be pre-stressed in tension within two fixing anchors. The extension of the bar is detected by using two vacuum-packaged resonant MEMS double- ended tuning fork (DETF) sensors bonded on the bar with epoxy glue, one of which is utilized for temperature compensation. Both sensors are driven by a closed loop self-oscillating transresistance amplifier feedback scheme implemented on a PCB (Printed Circuit Board). On the same board, a microcontroller-based frequency measurement circuit is also implemented, which is able to count the square wave fronts of the MEMS oscillator output with a resolution of 20 nsec. The system provides a frequency noise of 0.2 Hz corresponding to an extension resolution of 4 nm for the extensometer. Nearly perfect temperature compensation of the frequency output is achieved in the temperature range 20-35 C using the reference sensor. © 2011 IEEE.

Deposition and characterisation of ultralow-stress ZnO thin films for application in FBAR-based gravimetric biosensors

Zinc oxide (ZnO) thin films were deposited at high rates ( > 50 nm min-1) using a unique technique known as high target utilisation sputtering (HiTUS). The films obtained possess good crystallographic orientation, low surface roughness, very low stress and excellent piezoelectric properties. We have utilised the films to develop highly sensitive biosensors based on thickness longitudinal mode (TLM) thin film bulk acoustic resonators (FBARs). The FBARs have the fundamental TLM at a frequency near 1.5 GHz and quality factor Q higher than 1,000, which is one of the largest values ever reported for ZnO-based FBARs. Bovine Serum Albumin (BSA) solutions with different concentrations were placed on the top of different sets of identical FBARs and their responses to mass-loading from physically adsorbed protein coatings were investigated. These resonators demonstrated a high sensitivity and thus have a great potential as gravimetric sensors for biomedical applications. © 2011 Inderscience Enterprises Ltd.

HACCP based management system for improving quality of freshwater giant prawn, Macrobrachium rosenbergii

The study was conducted on the present status of HACCP based quality management system of golda, Macrobrachium rosenbergii farms in Fulpur region of Mymensingh. Information was collected on general condition of farms, culture systems and post-harvest quality management. In almost all farms, there is no or inadequate infrastructure facilities such as, road access, electric supply, telecommunications, ice, feed storage facility, vehicle for golda transportation, washing and toilet facilities. The problems associated with sanitation and hygiene was: widespread use of cow dung, poultry manure and construction of open toilet within the vicinity of prawn culture pond. Different grades of commercially available and locally prepared feeds were used for golda culture in the pond. Golda post-larvae (PL) of 40-50 days old were stocked with carp species. The price of golda PL ranged from Tk. 1.00 to Tk. 1.25/piece. The pond size varied from 50 decimal (0.2 ha) to 2.5 acre (1.0 ha) with an average depth of 2-2.5 m. The culture period of golda varied from April-May to November-December and survival rate ranged between 75 and 80%. Production of golda varied from 250-500 kg/acre (625-1,250 kg/ha). Harvested golda were transported to city market within 4 h. Two size grading were generally followed during pricing, e.g. Tk. 500 to 550/kg for >100 g size and Tk. 300/kg for <100 g size. The cost-benefit ratio was found to remain around 1:1.25 depending on availability of PL. Water quality parameters such as, water temperature, pH, dissolved oxygen, total alkalinity and chlorophyll a in five golda farms in Fulpur region were monitored. Water temperature ranged from 29°C to 33°C, dissolved oxygen from 2.28 to 4.13 mg/l, pH between 6.65 and 7.94, alkalinity from 44 to 70 mg/l and chlorophyll a concentration from 61.88 to 102.34 µg/l in the five investigated ponds. The Aerobic Plate Count (APC) of the water sample was within the range of 2.0x10^6 - 2.96x10^7 CFU/ml and of soil samples within the range of 6.9x10^6 - 7.73x10^6 CFU/g. Streptococcus sp., Bacillus sp., Escherichia coli, Staphylococcus sp., Pseudomonas sp. and Salmonella sp. were isolated from pond water and sediment. Different feed samples used for golda was analyzed for proximate composition. Moisture content ranged around 14.14-21.22%, crude protein 20.55-44.1%, lipid 4.67-12.54% and ash 9.7-27.69%. The TVB-N values and peroxide values of feeds used as starter, grower and fish meal were found within the acceptable ranges and samples were free from pathogenic organisms. A training was organized for the golda farmers on HACCP, water quality and post-harvest quality management of prawn.

Molecular phylogenetic systematics of twelve species of acipenseriformes based on mtDNA ND4L-ND4 gene sequence analysis

Acipenseriformes is an endangered primitive fish group, which occupies a special place in the history of ideas concerning fish evolution, even in vertebrate evolution. However, the classification and evolution of the fishes have been debated. The mitochondrial DNA (mtDNA) ND4L and partial ND4 genes were first sequenced in twelve species of the order Acipenseriformes, including endemic Chinese species. The following points were drawn from DNA sequences analysis: (i) the two species of Huso can be ascribed to Acipenser; (ii) A. dabryanus is the mostly closely related to A. sinensis, and most likely the landlocked form of A. sinensis; (iii) genus Acipenser in trans-Pacific region might have a common origin; (iv) mtDNA ND4L and ND4 genes are the ideal genetic markers for phylogenetic analysis of the order Acipenseriformes.

Phylogeny of the bears (Ursidae) based on nuclear and mitochondrial genes

The taxomic classification and phylogenetic relationships within the bear family remain argumentative subjects in recent years. Prior investigation has been concentrated on the application of different mitochondrial (mt) sequence data, herein we employ tw

Phylogenetic studies of pantherine cats (Felidae) based on multiple genes, with novel application of nuclear beta-fibrinogen intron 7 to carnivores

The pantherine lineage of the cat family Felidae (order: Carnivora) includes five big cats of genus Panthera and a great many midsized cats known worldwide. Presumably because of their recent and rapid radiation, the evolutionary relationship among pantherines remains ambiguous. We provide an independent assessment of the evolutionary history of pantherine lineage using two complete mitochondrial (mt) genes (ND2 and ND4) and the nuclear beta-fibrmogen intron 7 gene, whose utility in carnivoran phylogeny was first explored. The available four mt (ND5, cytb, 12S, and 16SrRNA) and two nuclear (IRBP and TTR) sequence loci were also combined to reconstruct phylogeny of 14 closely related cat species. Our analyses of combined mt data (six genes; approximate to 3750 bp) and combined mt and nuclear data (nine genes; approximate to 6500 bp) obtained identical tree topologies, which were well-resolved and strongly supported for almost all nodes. Monophyly of Panthera genus in pantherine lineage was confirmed and interspecific affinities within this genus revealed a novel branching pattern, with P. tigris diverging first in Panthera genus, followed by P. onca, P. leo, and last two sister species P. pardus and P. uncia. In addition, close association of Neofelis nebulosa to Panthera, the phylogenetic redefinition of Otocolobus manil within the domestic cat group, and the relatedness of Acinonyx jubatus and Puma concolor were all important findings in the resulting phylogenies. The potential utilities of nine different genes for phylogenetic resolution of closely related pantherine species were also evaluated, with special interest in that of the novel nuclear beta-fibrinogen intron 7. (c) 2005 Elsevier Inc. All rights reserved.

Mitochondrial variation of the "eyed" turtles (Sacalia) based on known-locality and trade specimens

Bryan L. Stuart is thanked for his hard work to collect wild specimens, as well as providing insightful and useful comments on the data. We thank Abigail Wolf of the Field Museum for providing photographs of specimens. Robert Murphy of the Royal Ontario M

Impact of common carp, Cyprinus carpio (L.) and Nile tilapia, Oreochromis niloticus (L.) on arthropods population, zoobenthos and weeds in rice-fish culture

An experiment was carried out in the fields of the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh, Bangladesh to determine the impact of common carp (Cyprinus carpio) and tilapia (Oreochromis niloticus) culture on arthropod population, zoobenthos and weeds of rice field. The treatments were: (1) rice combined with mono sex tilapia, (2) rice combined with common carp, (3) rice combined with a mixed culture of mono sex tilapia and common carp and (4) rice alone. It was observed that tilapia significantly reduced the number of arthropods, green leafhoppers and white leafhoppers in the rice-fish production systems. Benthos analysis revealed significant effects of fish culture on the abundance of molluscs, oligochaete worms and chironomid larvae. Lowest number of benthos was obtained in the treatments with common carp and significant reduction of the weed biomass was observed, especially in the tilapia containing plots. Based on the results of the study it can be suggested that common carp may play an important role in controlling of benthic organisms, while tilapia might be more effective to control terrestrial arthropods and weeds.