Biomass production and phosphorus use of forage grasses fertilized with two phosphorus sources

A major constraint to agricultural production in acid soils of tropical regions is the low soil P availability, due to the high adsorption capacity, low P level in the source material and low efficiency of P uptake and use by most of the modern varieties grown commercially. This study was carried out to evaluate the biomass production and P use by forage grasses on two soils fertilized with two P sources of different solubility. Two experiments were carried out, one for each soil (Cambisol and Latosol), using pots filled with 4 dm³ soil in a completely randomized design and a 4 x 2 factorial scheme. The treatments consisted of a combination of four forage plants (Brachiaria decumbens, Brachiaria brizantha, Pennisetum glaucum and Sorghum bicolor) with two P sources (Triple Superphosphate - TSP and Arad Reactive Phosphate - ARP), with four replications. The forage grasses were harvested at pre-flowering, when dry matter weight and P concentrations were measured. Based on the P concentration and dry matter production, the total P accumulation was calculated. With these data, the following indices were calculated: the P uptake efficiency of roots, P use efficiency, use efficiency of available P, use efficiency of applied P and agronomic efficiency. The use of the source with higher solubility (TSP) resulted, generally, in higher total dry matter and total P accumulation in the forage grasses, in both soils. For the less reactive source (ARP), the means found in the forage grasses, for use efficiency and efficient use of available P, were always higher when grown in Latosol, indicating favorable conditions for the solubility of ARP. The total dry matter of Brachiaria brizantha was generally higher, with low P uptake, accumulation and translocation, which indicated good P use efficiency for both P sources and soils. The forage plants differed in the P use potential, due to the sources of the applied P and of the soils used. Less than 10 % of the applied P was immobilized in the forage dry matter. Highest values were observed for TSP, but this was not reflected in a higher use efficiency of P from this source.

Dynamic compact thermal models with multiple power sources: application to an ultrathin chip stacking technology

Whereas numerical modeling using finite-element methods (FEM) can provide transient temperature distribution in the component with enough accuracy, it is of the most importance the development of compact dynamic thermal models that can be used for electrothermal simulation. While in most cases single power sources are considered, here we focus on the simultaneous presence of multiple sources. The thermal model will be in the form of a thermal impedance matrix containing the thermal impedance transfer functions between two arbitrary ports. Eachindividual transfer function element ( ) is obtained from the analysis of the thermal temperature transient at node ¿ ¿ after a power step at node ¿ .¿ Different options for multiexponential transient analysis are detailed and compared. Among the options explored, small thermal models can be obtained by constrained nonlinear least squares (NLSQ) methods if the order is selected properly using validation signals. The methods are applied to the extraction of dynamic compact thermal models for a new ultrathin chip stack technology (UTCS).

Aggregate stability as affected by short and long-term tillage systems and nutrient sources of a hapludox in southern Brazil

The ability of a soil to keep its structure under the erosive action of water is usually high in natural conditions and decreases under frequent and intensive cultivation. The effect of five tillage systems (NT = no-till; CP = chisel plowing and one secondary disking; CT = primary and two secondary distings; CTb = CT with crop residue burning; and CTr = CT with removal of crop residues from the field), combined with five nutrient sources (C = control, no nutrient application; MF = mineral fertilizers according to technical recommendations for each crop; PL = 5 Mg ha-1 y-1 fresh matter of poultry litter; CM = 60 m³ ha-1 y-1 slurry cattle manure; and SM = 40 m³ ha-1 y-1 slurry swine manure) on wet-aggregate stability was determined after nine years (four sampled soil layers) and on five sampling dates in the 10th year (two sampled soil layers) of the experiment. The size distribution of the air-dried aggregates was strongly affected by soil bulk density, and greater values of geometric mean diameter (GMD AD) found in some soil tillage or layer may be partly due to the higher compaction degree. After nine years, the GMD AD on the surface was greater in NT and CP compared to conventional tillage systems (CT, CTb and CTr), due to the higher organic matter content, as well as less soil mobilization. Aggregate stability in water, on the other hand, was affected by the low variation in previous gravimetric moisture of aggregates, which contributed to a high coefficient of variation of this attribute. The geometric mean diameter of water-stable aggregates (GMD WS) was highest in the 0.00-0.05 m layer in the NT system, in the layers 0.05-0.10 and 0.12-0.17 m in the CT, and values were intermediate in CP. The stability index (SI) in the surface layers was greater in treatments where crop residues were kept in the field (NT, CP and CT), which is associated with soil organic matter content. No differences were found in the layer 0.27-0.32 m. The effect of nutrient sources on GMD AD and GMD WS was small and did not affect SI.

15N uptake fom manure and fertilizer sources by three consecutive crops under controlled conditions

There are several regions of the world where soil N analysis and/or N budgets are not used to determine how much N to apply, resulting in higher than needed N inputs, especially when manure is used. One such region is the North Central "La Comarca Lagunera", one of the most important dairy production areas of Mexico. We conducted a unique controlled greenhouse study using 15N fertilizer and 15N isotopic-labeled manure that was labeled under local conditions to monitor N cycling and recovery under higher N inputs. The manure-N treatment was applied only once and was incorporated in the soil before planting the first forage crop at an equivalent rate of 30, 60 and 120 Mg ha-1 dry manure. The 15N treatments were equivalent to 120 and 240 kg ha-1 (NH4)2SO4-N for each crop. The total N fertilizer for each N fertilized treatment were 360, and 720 kg ha-1 N. We found very low N recoveries: about 9 % from the manure N inputs, lower than the 22 to 25 % from the fertilizer N inputs. The manure N recovered belowground in soil and roots ranged from 82 to 88 %. The low recoveries of N by the aboveground and low soil inorganic nitrate (NO3-N) and ammonium (NH4-N) content after the third harvested suggested that most of the 15N recovered belowground was in the soil organic form. The losses from manure N inputs ranged from 3 to 11 %, lower than the 34 to 39 % lost from fertilizer N sources. Our study shows that excessive applications of manure or fertilizer N that are traditionally used in this region will not increase the rate of N uptake by aboveground compartment but will increase the potential for N losses to the environment.

Response of irrigated wheat cultivars to different nitrogen rates and sources

High wheat yields require good N fertilization management. The objective of this study was to evaluate the effects of different N applications at sowing using Entec (N source with nitrification inhibitor) and urea (traditional N source) at covering, on four wheat cultivars. The experiment was conducted in a randomized block design in a factorial scheme, with four replications, at the Experimental Station of the Faculdade de Engenharia de Ilha Solteira - UNESP, on a dystrophic, epi-eutrophic alic Red Latosol with loamy texture, formerly under savannah vegetation. Four N rates (0, 60, 120, and 180 kg ha-1) were tested, applied at sowing in the case of Entec and top-dressed 40 days after plant emergence in the case of urea, and the four wheat cultivars E 21, E 22, E 42, and IAC 370. The yield of the wheat cultivars E 21 and E 42 was highest. Plant height and lodging index of cultivar E 22 were greatest, with consequently lowest grain yield. There was no significant difference between Entec (applied at sowing) and urea (top-dressed) in terms of grain yield and yield components. Nevertheless, urea resulted in a higher N leaf content, and Entec in a larger number of undeveloped spikelets. High nitrogen rates influenced the hectoliter mass negatively, affecting wheat grain quality. Grain yield increased under N rates of up to 82 kg ha-1 N, through Entec applied at sowing or top-dressed urea.

Were Spanish migrants attracted by industrial agglomerations?: an analysis for the interwar years in the light of the new economic geography

In this paper we examine whether access to markets had a significant influence onmigration choices of Spanish internal migrants in the inter-war years. We perform astructural contrast of a New Economic Geography model that focus on the forwardlinkage that links workers location choice with the geography of industrial production,one of the centripetal forces that drive agglomeration in the NEG models. The resultshighlight the presence of this forward linkage in the Spanish economy of the inter-warperiod. That is, we prove the existence of a direct relation between workers¿ localizationdecisions and the market potential of the host regions. In addition, the direct estimationof the values associated with key parameters in the NEG model allows us to simulatethe migratory flows derived from different scenarios of the relative size of regions andthe distances between them. We show that in Spain the power of attraction of theagglomerations grew as they increased in size, but the high elasticity estimated for themigration costs reduced the intensity of the migratory flows. This could help to explainthe apparently low intensity of internal migrations in Spain until its upsurge during the1920s. This also explains the geography of migrations in Spain during this period,which hardly affected the regions furthest from the large industrial agglomerations (i.e.,regions such as Andalusia, Estremadura and Castile-La Mancha) but had an intenseeffect on the provinces nearest to the principal centres of industrial development.

Audit report on America’s Agricultural Industrial Heritage Landscape, Inc., d/b/a Silos and Smokestacks National Heritage Area, in Waterloo, Iowa for the years ended December 31, 2010 and 2009

Audit report on America’s Agricultural Industrial Heritage Landscape, Inc., d/b/a Silos and Smokestacks National Heritage Area, in Waterloo, Iowa for the years ended December 31, 2010 and 2009

Integración económica y localización industrial. Cataluña, la fábrica de España: ¿cuándo y por qué?

En este artículo se analizan los determinantes de la localización de la actividad industrial en España durante la segunda mitad del siglo XIX. El objetivo es estudiar la existencia de cambios en los factores explicativos de la localización, con el fin de identificar los efectos de la integración económica sobre la geografía industrial española. Para hacerlo, en primer lugar se analiza la literatura histórica existente. En segundo lugar, se describen las teorías que explican la localización de l'actividad. En tercer lugar, se realiza un análisis empírico de la localización y la concentración de la industria española al siglo XIX. A continuación, se propone un estudio econométrico de los determinantes de la localización industrial en dos cortes temporales, 1856 y 1893. Los resultados son consistentes con las teorías del comercio. Durante el decurso de la segunda mitad del siglo XIX, España paso a ser una economía integrada, la movilidad del trabajo y del capital se vio favorecida y como resultado, las diferencias relativas en las dotaciones de factores perdieron importancia en la explicación de las pautas de especialización industrial. Por el contrario, la integración económica favoreció la significación relativa de las economías de escala o de la proximidad a los mercados como elementos explicativos de la localización de la industria, favoreciendo, de esta manera, la aglomeración de la actividad industrial

The determinants of industrial location in Spain, 1856-1929

Durant el segle XIX, l'economia espanyola va transitar per les primeres etapes de la industrialització. Aquest procés es va donar en paral·lel a la integració del mercat domèstic de béns i factors, en un moment en què les reformes liberals i la construcció de la xarxa ferroviària, entre d'altres, van generar una important caiguda en els costos detransport. Al mateix temps que es donava aquesta progressiva integració del mercat domèstic espanyol, es van produir canvis significatius en la pauta de localització industrial. D'una banda, hi hagué un augment considerable de la concentració espacial de la indústria des de mitjans de segle XIX i fins a la Guerra Civil, i d¿altra, un increment de l'especialització regional. Ara bé, quines van ser les forces que van generar aquests canvis? Des d¿un punt de vista teòric, el model de Heckscher-Ohlin suggereix que la distribució a l'espai de l¿activitat econòmica ve determinada per l'avantatge comparativa dels territoris en funció de la dotació relativa de factors. Al seu torn, els models de Nova Geografia Econòmica (NEG) mostren l'existència d'una relació en forma de campana entre el procés d'integració econòmica i el grau de concentració geogràfica de l'activitat industrial. Aquest article examina empíricament els determinants de la localització industrial a Espanya entre 1856 i 1929, mitjançant l'estimació d¿un model que combina els elements de tipus Heckscher-Ohlin i els factors apuntats des de la NEG, amb l'objectiu de contrastar la força relativa dels arguments vinculats a aquestes dues interpretacions a l'hora de modular la localització de la indústria a Espanya. L'anàlisi dels resultats obtinguts mostra que tant la dotació de factors com els mecanismes de tipus NEG van ser elements determinants que expliquen la distribució geogràfica de la indústria des del segle XIX, tot i que la seva força relativa va anar variant amb el temps.

Agricultural phosphorus and water quality : sources, transport and management

Selostus: Maatalous, fosfori ja veden laatu: alkuperä, kulkeutuminen ja vesistökuormituksen hallinta

Industrial agglomerations and wage gradients: the Spanish economy in the interwar period

This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.

Potencialidad de la modelización state-space y el filtro de Kalman para el anàlisis regional : una aplicación para el índice de actividad industrial

El déficit existente a nuestro país con respecto a la disponibilidad de indicadores cuantitativos con los que llevar a término un análisis coyuntural de la actividad industrial regional ha abierto un debate centrado en el estudio de cuál es la metodología más adecuada para elaborar indicadores de estas características. Dentro de este marco, en este trabajo se presentan las principales conclusiones obtenidas en anteriores estudios (Clar, et. al., 1997a, 1997b y 1998) sobre la idoneidad de extender las metodologías que actualmente se están aplicando a las regiones españolas para elaborar indicadores de la actividad industrial mediante métodos indirectos. Estas conclusiones llevan a plantear una estrategia distinta a las que actualmente se vienen aplicando. En concreto, se propone (siguiendo a Israilevich y Kuttner, 1993) un modelo de variables latentes para estimar el indicador de la producción industrial regional. Este tipo de modelo puede especificarse en términos de un modelo statespace y estimarse mediante el filtro de Kalman. Para validar la metodología propuesta se estiman unos indicadores de acuerdo con ella para tres de las cuatro regiones españolas que disponen d¿un Índice de Producción Industrial (IPI) elaborado mediante el método directo (Andalucía, Asturias y el País Vasco) y se comparan con los IPIs publicados (oficiales). Los resultados obtenidos muestran el buen comportamiento de l¿estrategia propuesta, abriendo así una línea de trabajo con la que subsanar el déficit al que se hacía referencia anteriormente

Algunes reflexions sobre la construcció d'indicadors indirectes pel seguiment de l'activitat industrial regional

En un gran nombre d'economies, l'evolució de la producció industrial s'analitza a partir de la informació sobre el Producte Industrial Brut i/o el Valor Afegit Brut que proporcionen les Comptabilitats Nacionals. A Espanya, la utilització d'aquestes dades presenta el problema que no estan disponibles tan ràpidament com seria desitjable. En conseqüència, no és possible realitzar un seguiment a curt termini de l'activitat industrial a partir dels mateixos. Per a solucionar aquest problema, l'Institut Nacional d'Estadística elabora un Índex de Producció Industrial mensual a partir de la informació obtinguda a través d'una enquesta dirigida a una mostra representativa de les empreses espanyoles. No obstant això, a nivell regional, les dificultats per a realitzar un seguiment de l'activitat industrial són majors a causa de l'escassesa d'informació estadística. Durant els últims anys, diferents institucions públiques i privades han començat a elaborar indicadors d'activitat per a algunes regions espanyoles, encara que a partir de metodologies no homogènies, de manera que aquests índexs no són directament comparables. Per a corregir aquesta situació, en diferents fòrums s'ha proposat emprar la metodologia utilitzada per l'Institut d'Estadística de Catalunya (IEC) per a la comunitat catalana com alternativa per a aquelles comunitats espanyoles que no disposen d'un indicador de l'activitat industrial, atès que per a Catalunya resulta una metodologia adequada. En aquest treball s'estudia la idoneïtat d'estendre aquesta metodologia a la resta de regions espanyoles. Per a això, es construeixen uns indicadors d'acord amb la metodologia del IEC i es comparen amb els índexs regionals obtinguts per mètodes directes per a tres de les quatre regions que existeixen: Andalusia, Astúries i Euskadi