Konstruktioner och valens : Verbfraser med åt i ett jämförande perspektiv

Det har knappast undgått någon som är språkligt medveten att finlandssvenskan och sverigesvenskan skiljer sig åt till vissa delar. Olikheterna återfinns på olika språkliga nivåer. Mest kända och omskrivna är de lexikologiska skillnaderna, dvs. skillnaderna på ordplanet. Betydligt mindre uppmärksamhet har ägnats syntaktiska skillnader, dvs. skillnader i hur satser och meningar byggs upp. För att öka kunskapen om finlandssvensk syntax initierade Språkvetenskapliga nämnden vid Svenska litteratursällskapet i Finland projektet Svenskan i Finland – syntaktiska drag i ett jämförande perspektiv, som pågick åren 2004–2006. Min avhandling har kommit till inom ramen för det projektet. Prepositionerna (t.ex. av, i, på, för, till, åt osv.) är så kallade funktionsord som har till uppgift att binda samman de mer betydelsetunga orden till satser och meningar. Den finlandssvenska prepositionsanvändningen skiljer sig i viss mån från den sverigesvenska, och ”åt” är en av de prepositioner som ofta lyfts fram som exempel. Finlandssvenskarna säger t.ex. ”han gav en bok åt Lena” i stället för ”han gav en bok till Lena” eller ”han gav Lena en bok”. De säger ”berätta något åt någon” (i stället för ”för”) och de säger ”ringa åt någon” i stället för ”ringa någon”. Ett huvudsyfte med min undersökning är att ta reda på hur pass stora skillnaderna är om man ser till samtliga belägg på ”åt” i ett material och inte bara till sådana som man fäster sig vid för att man vet att de avviker i finlandssvenskan. Undersökningen är korpusbaserad. Det betyder att jag letat efter alla belägg på kombinationer av verb och prepositionen ”åt” i rätt stora textmassor som finns tillgängliga i elektronisk form. Materialet ligger i Språkbanken i Finland och omfattar huvudsakligen tidningstext och skönlitteratur. Jag har använt mig av en textmassa på sammanlagt ungefär 40 miljoner löpande ord, drygt 23 miljoner finlandssvenska och drygt 19 miljoner sverigesvenska. Det materialet gav ca 20 000 åt-belägg att studera, och det visade sig något oväntat att ”åt” inte alls är vanligare i finlandssvenskan än i sverigesvenskan när det gäller skriftspråk, åtminstone inte i professionella skribenters språk. Om man kompenserar för att den finlandssvenska och den sverigesvenska korpusen inte är helt lika i fråga om genrefördelning och ålder, kommer man fram till i stort sett samma frekvens för ”åt” i båda korpusarna. För den närmare analysen av vilka mönster åt-beläggen uppvisar har jag först och främst utnyttjat konstruktionsgrammatik men också ramsemantik och valensteori. Konstruktionsgrammatiken är ingen enhetlig teori, men tanken om grammatiska konstruktioner är gemensam. Konstruktioner representerar allt från generella syntaktiska mönster till specifika mönster för språkliga enskildheter. Uppfattningen om vad som ska inbegripas i begreppet varierar, men definitionen av ”konstruktion” som ”par (eller konstellationer) av form och betydelse” är gemensam. ”Konstruktion” avser aldrig konkreta belägg i texter eller yttranden utan alltid det abstrakta mönstret bakom dessa. Och varje yttrande är resultatet av att en stor mängd konstruktioner samverkar. I min analys har jag utgått ifrån att beläggen med ”åt” kan återföras på olika konstruktioner eller mönster utifrån vad som är gemensamt för grupper av belägg. Jag har sett på vad åt-frasen i samverkan med verbet har för funktion i beläggen. En åt-fras är syntaktiskt en prepositionsfras och består av en preposition och en rektion. Exempelvis utgör ordparet ”åt skogen” en prepositionsfras där ”skogen” är rektion. Ur mitt material har jag kunnat abstrahera fram fem övergripande mönster där referenten för rektionen har olika så kallade semantiska roller. Åt-frasen kan i kombination med verbet ange mål eller riktmärke, som i t.ex. svänga åt höger, dra åt helvete, ta sig åt hjärtat, luta åt en seger för IFK. Den kan för det andra ange mottagare (t.ex. ge varsin kaka åt hundarna, bygga en bastu åt sina svärföräldrar, skaffa biljetter åt en kompis). För det tredje kan åt-frasen avse en referent som har nytta (eller skada) av en aktion (t.ex. klippa häcken åt grannen, ställa in digitalboxen åt sin moster). Åt-frasen kan slutligen avse den eller det som är föremål antingen för en kommunikationsaktion (vinka åt sin son, skratta åt eländet) eller en attityd eller känsla (glädja sig åt framgången). Utöver dessa huvudmönster finns det ett antal smärre grupper av belägg som bildar egna mönster, men de utgör sammanlagt under 3 % i bägge korpusarna. Inom grupperna kan undermönster urskiljas. I t.ex. mottagargruppen representerar ”ge varsin kaka åt hundarna” överföringskonstruktion, ”bygga en bastu åt sina svärföräldrar” produktionskonstruktion och ”skaffa biljetter åt en kompis” ombesörjningskonstruktion. Alla typer är gemensamma för bägge materialen, men andelen belägg som representerar de olika typerna skiljer sig betydligt. I det sverigesvenska materialet står t.ex. det mönster där åt-frasen avser mål eller riktmärke för en mycket större andel av beläggen än i finlandssvenskan. Också andelen belägg där åt-frasen avser någon som har nytta (eller skada) av en aktion är mycket högre i det sverigesvenska materialet. I det finlandssvenska materialet står i gengäld mottagarbeläggen för över 50 % av beläggen medan andelen i det sverigesvenska materialet är bara 30 %. Inom gruppen utgör belägg av produktions- och ombesörjningstyp dessutom en mindre andel i det finlandssvenska materialet än i det sverigesvenska. Dessa står till sin funktion nära den typ som avser den som har nytta av aktionen. De konkreta beläggen på överföring (ge varsin kaka åt hundarna) utgör en större andel i det finlandssvenska materialet än i det sverigesvenska (ca 8 % mot 3 %), men typiskt för båda materialen är hög kollokationsgrad (”kollokation” avser par eller grupper av ord som uppträder oftare tillsammans än de statiskt sett skulle göra vid helt slumpmässig förekomst). Största delen av mottagarbeläggen utgörs av fraser av typen ”ge arbete åt någon, ge eftertryck åt något, ge liv åt något; ägna tid åt något, ägna sitt liv åt något, ägna uppmärksamhet åt något”. De här slutsatserna gäller alltså skriftspråk. I talspråk ser fördelningen annorlunda ut. Typiskt för prepositionen ”åt” är överhuvudtaget hög kollokationsgrad. Det förefaller som om språkanvändarna har tydliga, färdiga mallar för var ”åt” kan komma in. Det enda mönster som verkar helt produktivt, i den meningen att elementen är i stort sett fritt kombinerbara, är kombinationer av verb och åt-fras där åt-frasen avser den som har nytta av något. Att någon utför något för någons räkning verkar överlag kunna uttryckas med prepositionen ”åt”: t.ex. ”tvätta bilen åt pappa, ringa efter en taxi åt kunden”. Till och med belägg av typen ”hon drömde åt honom att bli ordinarie adjunkt” förekommer i någon mån. Konstruktionen är produktiv i båda språkvarieteterna men uppenbart är att konstruktion med mottagare har tolkningsföreträde i vissa fall i finlandssvenskan: ”Filip skrev ett brev åt sin syster” tolkas av sverigesvenskar som att Filip skrev brevet för systerns räkning, medan finlandssvenskar överlag uppenbarligen tolkar det som att Filip skrev till sin syster, att systern var mottagare av brevet. Ungefär 20 % av alla belägg i båda materialen representerar fall där ”åt” utgör partikel. Verb och ”åt” är närmare förbundna med varandra än när ”åt” utgör normal preposition. Exempel på partikelbelägg är ”han kom inte åt strömbrytaren, det gick åt mängder med saft, landet får dra åt svångremmen, de roffade åt sig de bästa platserna”. Också partikelmaterialet ser på ett generellt plan väldigt lika ut i båda språkvarieteterna. Den största skillnaden uppvisar den reflexiva typen ”roffa åt sig”. Medan typen är mycket homogen i det sverigesvenska materialet är variationen större i det finlandsvenska. Dels uppträder fler verb i kombinationen (han köpte åt sig ett par jeans), dels vacklar ordföljden (han nappade åt sig ett paraply ~ han nappade ett paraply åt sig). Att ”åt” används mer i vissa funktioner i finlandsvenskan brukar förklaras med påverkan från finskans allativ (ändelsen -lle: hän antoi kirjan Astalle > hon gav en bok åt Asta). Allt tyder dock på att den finlandssvenska åt-användningen delvis är en relikt. I äldre sverigesvenska källor träffar man på ”åt” i sådana kontexter som numera är typiska för finlandsvenskan. Det finlandssvenska språkområdet ligger ute i periferin i relation till det språkliga centrum som förändringar sprider sig från (för svenskans del främst Stockholmstrakten) och typiskt för perifera områden är att de uppvisar ålderdomliga drag också när inga kontaktfenomen spelar in. Allativen kan naturligtvis ha bidragit till att bevara användningen av ”åt” i finlandssvenskan. Att det är just ”åt” som används” beror antagligen på att prepositionen har flest funktioner gemensamt med allativen rent kognitivt om man jämför med de betydligt mer frekventa prepositionerna ”till” och ”för”. Uppenbart är också att åt-användningen därtill lever sitt eget liv i finlandssvenskan. I vissa varieteter av finlandssvenska kan man t.ex. höra yttranden av typ ”alla fiskarna dog åt dom”. Som språklig enskildhet har det ingen finsk förebild med allativ. Yttrandet är ett exempel på töjning av en svensk konstruktion. Modell finns dels i det mönster där åt avser den som har nytta eller skada av något, dels i relationell användning av ”åt”: han är hantlangare åt Eriksson ~ han är Erikssons hantlangare. Vid språkkontakt är det överlag konstruktioner som har förebild i det låntagande språket som lånas in från det långivande språket, medan konstruktioner som saknar förebild är betydligt mindre benägna att vinna insteg.

Climate change impacts on northern Australian rangeland livestock carrying capacity: a review of issues

Grazing is a major land use in Australia's rangelands. The 'safe' livestock carrying capacity (LCC) required to maintain resource condition is strongly dependent on climate. We reviewed: the approaches for quantifying LCC; current trends in climate and their effect on components of the grazing system; implications of the 'best estimates' of climate change projections for LCC; the agreement and disagreement between the current trends and projections; and the adequacy of current models of forage production in simulating the impact of climate change. We report the results of a sensitivity study of climate change impacts on forage production across the rangelands, and we discuss the more general issues facing grazing enterprises associated with climate change, such as 'known uncertainties' and adaptation responses (e.g. use of climate risk assessment). We found that the method of quantifying LCC from a combination of estimates (simulations) of long-term (>30 years) forage production and successful grazier experience has been well tested across northern Australian rangelands with different climatic regions. This methodology provides a sound base for the assessment of climate change impacts, even though there are many identified gaps in knowledge. The evaluation of current trends indicated substantial differences in the trends of annual rainfall (and simulated forage production) across Australian rangelands with general increases in most of western Australian rangelands ( including northern regions of the Northern Territory) and decreases in eastern Australian rangelands and south-western Western Australia. Some of the projected changes in rainfall and temperature appear small compared with year-to-year variability. Nevertheless, the impacts on rangeland production systems are expected to be important in terms of required managerial and enterprise adaptations. Some important aspects of climate systems science remain unresolved, and we suggest that a risk-averse approach to rangeland management, based on the 'best estimate' projections, in combination with appropriate responses to short-term (1-5 years) climate variability, would reduce the risk of resource degradation. Climate change projections - including changes in rainfall, temperature, carbon dioxide and other climatic variables - if realised, are likely to affect forage and animal production, and ecosystem functioning. The major known uncertainties in quantifying climate change impacts are: (i) carbon dioxide effects on forage production, quality, nutrient cycling and competition between life forms (e.g. grass, shrubs and trees); and (ii) the future role of woody plants including effects of. re, climatic extremes and management for carbon storage. In a simple example of simulating climate change impacts on forage production, we found that increased temperature (3 degrees C) was likely to result in a decrease in forage production for most rangeland locations (e. g. -21% calculated as an unweighted average across 90 locations). The increase in temperature exacerbated or reduced the effects of a 10% decrease/increase in rainfall respectively (-33% or -9%). Estimates of the beneficial effects of increased CO2 (from 350 to 650 ppm) on forage production and water use efficiency indicated enhanced forage production (+26%). The increase was approximately equivalent to the decline in forage production associated with a 3 degrees C temperature increase. The large magnitude of these opposing effects emphasised the importance of the uncertainties in quantifying the impacts of these components of climate change. We anticipate decreases in LCC given that the 'best estimate' of climate change across the rangelands is for a decline (or little change) in rainfall and an increase in temperature. As a consequence, we suggest that public policy have regard for: the implications for livestock enterprises, regional communities, potential resource damage, animal welfare and human distress. However, the capability to quantify these warnings is yet to be developed and this important task remains as a challenge for rangeland and climate systems science.

A simulation study of the mixing, atomic flow and velocity profiles of crystalline materials during sliding

Self-contained Non-Equilibrium Molecular Dynamics (NEMD) simulations using Lennard-Jones potentials were performed to identify the origin and mechanisms of atomic scale interfacial behavior between sliding metals. The mixing sequence and velocity profiles were compared via MD simulations for three cases, viz.: sell-mated, similar and hard-softvcrystal pairs. The results showed shear instability, atomic scale mixing, and generation of eddies at the sliding interface. Vorticity at the interface suggests that atomic flow during sliding is similar to fluid flow under Kelvin-Helmholtz instability and this is supported by velocity profiles from the simulations. The initial step-function velocity profile spreads during sliding. However the velocity profile does not change much at later stages of the simulation and it eventually stops spreading. The steady state friction coefficient during simulation was monitored as a function of sliding velocity. Frictional behavior can be explained on the basis of plastic deformation and adiabatic effects. The mixing layer growth kinetics was also investigated.

Potential economic benefit of intensification of beef production in Australian rangelands: an operational case study perspective.

In Australia, the development of rangelands has led to steady gains in pastoral productivity through more intensive and widespread land use (Stokes et al., 2006). Opportunities to benefit from intensification exist on large properties with relatively poor water and fencing infrastructure development, resulting in uneven utilisation of available forage (Ash et al.,2006). The objective of this study is to value expected economic gains from carrying out property improvements on a beef property located in Northern Australia.

On a linear steady-state system of equations in microcontinuum fluid mechanics

Galerkin representations and integral representations are obtained for the linearized system of coupled differential equations governing steady incompressible flow of a micropolar fluid. The special case of 2-dimensional Stokes flows is then examined and further representation formulae as well as asymptotic expressions, are generated for both the microrotation and velocity vectors. With the aid of these formulae, the Stokes Paradox for micropolar fluids is established.

Highly Enhanced Thermopower in Two-Dimensional Electron Systems at Millikelvin Temperatures

We report experimental observation of an unexpectedly large thermopower in mesoscopic two-dimensional (2D) electron systems in GaAs/AlGaA heterostructures at sub-Kelvin temperatures and zero magnetic field. Unlike conventional nonmagnetic high-mobility 2D systems, the thermopower in our devices increases with decreasing temperature below 0.3 K, reaching values in excess of 100 mu V/K, thus exceeding the free electron estimate by more than 2 orders of magnitude. With support from a parallel study of the local density of states, we suggest such a phenomenon to be linked to intrinsic localized states and many-body spin correlations in the system.

On the origin of the inflectional instability of a laminar separation bubble

This is an experimental and theoretical Study of a laminar separation bubble and the associated linear stability mechanisms. Experiments were performed over a flat plate kept in a wind tunnel, with an imposed pressure gradient typical of an aerofoil that would involve a laminar separation bubble. The separation bubble was characterized by measurement of surface-pressure distribution and streamwise velocity using hot-wire anemometry. Single component hot-wire anemometry was also used for a detailed study of the transition dynamics. It was foundthat the so-called dead-air region in the front portion of the bubble corresponded to a region of small disturbance amplitudes, with the amplitude reaching a maximum value close to the reattachment point. An exponential growth rate of the disturbance was seen in the region upstream of the mean maximum height of the bubble, and this was indicative of a linear instability mechanism at work. An infinitesimal disturbance was impulsively introduced into the boundary layer upstream of separation location, and the wave packet was tracked (in an ensemble-averaged sense) while it was getting advected downstream. The disturbance was found to be convective in nature. Linear stability analyses (both the Orr-Sommerfeld and Rayleigh calculations) were performed for mean velocity profiles, starting from an attached adverse-pressure-gradient boundary layer all the way up to the front portion of the separation-bubble region (i.e. up to the end of the dead-air region in which linear evolution of the disturbance could be expected). The conclusion from the present work is that the primary instability mechanism in a separation bubble is inflectional in nature, and its origin can be traced back to upstream of the separation location. In other words, the inviscid inflectional instability of the separated shear layer should be logically seen as an extension of the instability of the upstream attached adverse-pressure-gradient boundary layer. This modifies the traditional view that pegs the origin of the instability in a separation bubble to the detached shear layer Outside the bubble, with its associated Kelvin-Helmholtz mechanism. We contendthat only when the separated shear layer has moved considerably away from the wall (and this happens near the maximum-height location of the mean bubble), a description by the Kelvin-Helmholtz instability paradigm, with its associated scaling principles, Could become relevant. We also propose a new scaling for the most amplified frequency for a wall-bounded shear layer in terms of the inflection-point height and the vorticity thickness and show it to be universal.

Impression creep of zinc and the rate-controlling dislocation mechanism of plastic flow at high temperatures

The impression creep behaviour of zinc is studied in the range 300 to 500 K and the results are compared with the data from conventional creep tests. The steady-state impression velocity is found to exhibit the same stress and temperature dependence as in conventional tensile creep with the same power law stress exponent. Also studied is the effect of indenter size on the impression velocity. The thermal activation parameters for plastic flow at high temperatures derived from a number of testing techniques agree reasonably well. Grain boundary sliding is shown to be unimportant in controlling the rate of plastic flow at high temperatures. It is observed that the Cottrell-Stokes law is obeyed during high-temperature deformation of zinc. It is concluded that a mechanism such as forest intersection involving attractive trees controls the high-temperature flow rather than a diffusion mechanism.

Three-dimensional elastic analysis of cracked thick plates under bending fields

A three-dimensional analysis is presented for the bending problem of finite thick plates with through-the-thickness cracks. A general solution is obtained for Navier's equations of the theory of elasticity. It is found that the in-plane stresses and the transverse normal stress at the crack front are singular with an inverse square root singularity, while the transverse shear stresses are of the order of unity. Results from a numerical study indicate that the stress intensity factor, which varies across the thickness, is influenced by the thickness ratio in a significant manner. Results from a parametric study and those from a comparative study with existing finite element values are presented.

ESR evidence for 2 coexisting liquid phases in deeply supercooled bulk water

Using electron spin resonance spectroscopy (ESR), we measure the rotational mobility of probe molecules highly diluted in deeply supercooled bulk water and negligibly constrained by the possible ice fraction. The mobility increases above the putative glass transition temperature of water, T-g = 136 K, and smoothly connects to the thermodynamically stable region by traversing the so called "no man's land" (the range 150-235 K), where it is believed that the homogeneous nucleation of ice suppresses the liquid water. Two coexisting fractions of the probe molecules are evidenced. The 2 fractions exhibit different mobility and fragility; the slower one is thermally activated (low fragility) and is larger at low temperatures below a fragile-to-strong dynamic cross-over at approximate to 225 K. The reorientation of the probe molecules decouples from the viscosity below approximate to 225 K. The translational diffusion of water exhibits a corresponding decoupling at the same temperature [Chen S-H, et al. (2006) The violation of the Stokes-Einstein relation in supercooled water. Proc Natl Acad Sci USA 103:12974-12978]. The present findings are consistent with key issues concerning both the statics and the dynamics of supercooled water, namely the large structural fluctuations [Poole PH, Sciortino F, Essmann U, Stanley HE (1992) Phase behavior of metastable water. Nature 360: 324-328] and the fragile-to-strong dynamic cross-over at approximate to 228 K [Ito K, Moynihan CT, Angell CA (1999) Thermodynamic determination of fragility in liquids and a fragile-tostrong liquid transition in water. Nature 398: 492-494].

Equatorial modes observed in atmospheric variables

Wavenumber-frequency spectral analysis of different atmospheric variables has been carried Out using 25 years of data. The area considered is the tropical belt 25 degrees S-25 degrees N. A combined FFT wavelet analysis method has been used for this purpose. Variables considered are outgoing long wave radiation (OLR), 850 hPa divergence, zonal and meridional winds at 850, 500 and 200 hPa levels, sea level pressure and 850 hPa geopotential height. It is shown that the spectra of different variables have some common properties, but each variable also has few features diffe:rent from the rest. While Kelvin mode is prominent in OLR, and zonal winds, it is not clearly observed in pressure and geopotential height fields; the latter two have a dominant wavenumber zero mode not seen in other variables except in meridional wind at 200 hPa and 850 hPa divergences. Different dominant modes in the tropics show significant variations on sub-seasonal time scales.

A Note on Southwood's Instability Criterion

It is shown that Southwood's instability criterion for the onset of the Kelvin-Helmholtz instability at the magnetopause can be directly obtained from the marginal instability condition for the pure Alfven surface waves propagating along the interface between two incompressible media in the limit when the wave propagation direction is nearly perpendicular to the direction of the largest magnetic field. The phase velocity of the surface waves first excited at the onset of the instability depends on the angle between the interplanetary magnetic field and flow velocity in the solar wind in front of the bow shock.

Ultrafast Raman loss spectroscopy: a new approach to vibrational structure determination

The rapid data acquisition, natural fluorescence rejection and experimental ease are the advantages of the ultra-fast Raman loss scattering (URLS) which makes it a unique and valuable molecular structure-determining technique. URLS is an analogue of stimulated Raman scattering (SRS) but far more sensitive than SRS. It involves the interaction of two laser sources, viz. a picosecond (ps) pulse and white light, with the sample leading to the generation of loss signal on the higher energy (blue) side with respect to the wavelength of the ps pulse, unlike the gain signal observed on the red side in SRS. These loss signals are at least 1.5 times more intense than the SRS signals. Also, the very prerequisite of the experimental protocol for signal detection to be on the higher energy side by design eliminates the interference from fluorescence, which always appears on the red side. Unlike coherent anti-Stokes Raman scattering, URLS signals are not precluded by non-resonant background under resonance condition and also being a self-phase matched process, it is experimentally easier.

Implementation costs of Agricultural Management Practices for Water Quality Improvement in the Great Barrier Reef Catchments. CSIRO: Water for Healthy Country National Research Flagship

Executive summary. In this report we analyse implementation costs and benefits for agricultural management practices, grouped into farming systems. In order to do so, we compare plot scale gross margins for the dominant agricultural production systems (sugarcane, grazing and banana cultivation) in the NRM regions Wet Tropics, Burdekin Dry Tropics and Mackay Whitsundays. Furthermore, where available, we present investment requirements for changing to improved farming systems. It must be noted that transaction costs are not captured within this project. For sugarcane, this economic analysis shows that there are expected benefits to sugarcane growers in the different regions through transitions to C and B class farming systems. Further transition to A-class farming systems can come at a cost, depending on the capital investment required and the length of the investment period. Obviously, the costs and benefits will vary for each individual grower and will depend on their starting point and individual property scenario therefore each circumstance needs to be carefully considered before making a change in management practice. In grazing, overall, reducing stocking rates comes at a cost (reduced benefits). However, when operating at low utilisation rates in wetter country, lowering stocking rates can potentially come at a benefit. With win-win potential, extension is preferred to assist farmer in changing management practices to improve their land condition. When reducing stocking rates comes at a cost, incentives may be applicable to support change among farmers. For banana cultivation, the results indicate that the transition to C and B class management practices is a worthwhile proposition from an economic perspective. For a change from B to A class farming systems however, it is not worthwhile from a financial perspective. This is largely due to the large capital investment associated with the change in irrigation system and negative impact in whole of farm gross margin. Overall, benefits will vary for each individual grower depending on their starting point and their individual property scenario. The results presented in this report are one possible set of figures to show the changes in profitability of a grower operating in different management classes. The results in this report are not prescriptive of every landholder. Landholders will have different costs and benefits from transitioning to improved practices, even if similar operations are practiced, hence it is recommended that landholders that are willing to change management undertake their own research and analysis into the expected costs and benefits for their own soil types and property circumstances.

A chitotetrose specific lectin from Luffa acutangula :Physico-chemical properties and the assignment of orientation of sugars in the lectin binding site

A chitooligosaccharide specific lectin (Luffa acutangula agglutinin) has been purified from the exudate of ridge gourd fruits by affinity chromatography on soybean agglutininglycopeptides coupled to Sepharose-6B. The affinity purified lectin was found homogeneous by polyacrylamide gel electrophoresis, in sodium dodecyl sulphate-polyacrylamide gels, by gel filtration on Sephadex G-100 and by sedimentation velocity experiments. The relative molecular weight of this lectin is determined to be 48,000 ± 1,000 by gel chromatography and sedimentation equilibrium experiments. The sedimentation coefficient (S20, w) was obtained to be 4·06 S. The Stokes’ radius of the protein was found to be 2·9 nm by gel filtration. In sodium dodecyl sulphate-polyacrylamide gel electrophoresis the lectin gave a molecular weight of 24,000 in the presence as well as absence of 2-mercaptoethanol. The subunits in this dimeric lectin are therefore held by non-covalent interactions alone. The lectin is not a glycoprotein and circular dichroism spectral studies indicate that this lectin has 31% α-helix and no ß-sheet. The lectin is found to bind specifically to chitooligosaccharides and the affinity of the lectin increases with increasing oligosaccharide chain length as monitored by near ultra-violetcircular dichroism and intrinsic fluorescence titration. The values of ΔG, ΔΗ and ΔS for the binding process showed a pronounced dependence on the size of the oligosaccharide. The values for both ΔΗ and ΔS show a significant increase with increase in the oligosaccharide chain length showing that the binding of higher oligomers is progressively more favoured thermodynamically than chitobiose itself. The thermodynamic data is consistent with an extended binding site in the lectin which accommodates a tetrasaccharide. Based on the thermodynamic data, blue shifts and fluorescence enhancement, spatial orientation of chitooligosaccharides in the combining site of the lectin is assigned.