Integration of process planning and scheduling using mobile-agent based approach in a networked manufacturing environment

Effective and efficient implementation of intelligent and/or recently emerged networked manufacturing systems require an enterprise level integration. The networked manufacturing offers several advantages in the current competitive atmosphere by way to reduce, by shortening manufacturing cycle time and maintaining the production flexibility thereby achieving several feasible process plans. The first step in this direction is to integrate manufacturing functions such as process planning and scheduling for multi-jobs in a network based manufacturing system. It is difficult to determine a proper plan that meets conflicting objectives simultaneously. This paper describes a mobile-agent based negotiation approach to integrate manufacturing functions in a distributed manner; and its fundamental framework and functions are presented. Moreover, ontology has been constructed by using the Protégé software which possesses the flexibility to convert knowledge into Extensible Markup Language (XML) schema of Web Ontology Language (OWL) documents. The generated XML schemas have been used to transfer information throughout the manufacturing network for the intelligent interoperable integration of product data models and manufacturing resources. To validate the feasibility of the proposed approach, an illustrative example along with varied production environments that includes production demand fluctuations is presented and compared the proposed approach performance and its effectiveness with evolutionary algorithm based Hybrid Dynamic-DNA (HD-DNA) algorithm. The results show that the proposed scheme is very effective and reasonably acceptable for integration of manufacturing functions.

An assessment of catches and harvest of recreational shore angling in the north of Portugal

Recreational shore angling in the Atlantic Ocean between Moledo and Aveiro (Portugal) was examined using roving creel surveys (March/September 2001). Cooperation was high (90% of 2310 anglers approached). At least 39 species of fish were caught at a rate of approximately 0.5 fish angler h(-1). An estimated 7319 kg of Dicentrarchus labrax (L.), with 45.6% below the minimum legal size, and 2040 kg of sea breams (genus Diplodus), correspond to 5.75% and 1.19% of the commercial landings in the same geographical area, respectively. The results shed light on a number of issues relevant to integrated coastal management, including temporal and spatial distribution of fishing effort, species caught, sizes of fish, catch rates, and factors influencing catches and angler satisfaction. Whilst the results suggest that the catches of sea breams and sea bass by day-time recreational shore angling in northern Portugal are small compared with commercial fishing, other recreational activities, such as boat fishing and spear-fishing, must be assessed.

Quantifying recreational shore angling catch and harvest in southern Portugal (north-east Atlantic Ocean): implications for conservation and integrated fisheries management

Recreational shore fishing along 250 km of the south and south-west coast of Portugal was studied based on roving creel and aerial surveys. Surveys were conducted between August 2006 and July 2007, following a stratified random-sampling design and provided information on catch and effort, harvest and discards, angler demographics and fishing habits. Overall, 192 roving creel surveys, 24 aerial surveys and 1321 interviews were conducted. Based on the aerial surveys, a mean +/- s.e. total fishing effort of 705 236 +/- 32 765 angler h year(-1) was estimated, corresponding to 166 430 +/- 9792 fishing trips year(-1). Average time spent per fishing trip was 4.7 h. A total of 48 species, belonging to 22 families, were recorded in roving creel surveys. The most important species was Diplodus sargus, accounting for 44% of the total catches by number and 48% by mass. Estimated mean +/- s.e. total annual recreational shore fishing catch was 160.2 +/- 12.6 t year(-1) (788 049 +/- 54 079 fishes year(-1)), of which 147.4 +/- 11.9 t year(-1) (589 132 +/- 42 360 fishes year(-1)) was retained. Although overall shore-based recreational catches only corresponded to 0.8% of the commercial landings (only common species considered), D. sargus catches by recreational shore anglers were considerable, corresponding to 65% of the commercial landings. The implications of these results for integrated fisheries management and conservation are discussed, and future research proposed.

Evaluation of water use, yield and water productivity of a high-density orchard (cv. Cobrançosa) subjected to different irrigation regimes – An account of four years

The impact of different irrigation scheduling regimes on the water use, yield and water productivity from a high-density olive grove cv. Cobrançosa in southern Portugal was assessed during the irrigation seasons of 2011, 2012, 2013 and 2014. The experiments were conducted in a commercial olive orchard at the Herdade Álamo de Cima, near Évora (38o 29' 49.44'' N, 7o 45' 8.83'' W; alt. 75 m) in southern Alentejo, Portugal. The orchard was established with 10-year old Cobrançosa trees in grids of 8.0 x 4.2 m (300 trees ha-1) in the E-W direction, and experiments conducted on a shallow sandy loam Regosoil Haplic soil. From mid-May to the end of September the orchard was irrigated and three plots were subjected to one of two irrigation treatments: a control treatment A, irrigated to replace 100% ETc, a moderate deficit irrigation treatment B irrigated to 70% of ETc, and a more severe deficit irrigation treatment C that provided for approximately 50% of ETc. Daily tree transpiration rates were obtained by continuously monitoring of sap flow in representative trees per treatment. Among the irrigated treatments, water use efficiency (WUE, ratio of water used to irrigation- water applied) of treatment C was the highest, with a value of 0.89, being treatment B slightly lower, with a WUE of 0.76. Olive harvest for 2012 was an exceptional “on year”. Bearing yields showed contrasting differences within years where an “on year” was followed by an “off year”. In 2011 and 2012 treatment B yields were 41 and 50% higher than treatment C, respectively. In 2013 treatment B yield was 45% higher than yield of the fully irrigated treatment A, and treatment C showed practically the same yield than treatment A. In the “on year” of 2014 treatment B averaged 48% higher yield than treatment C. Treatment B farm irrigation water productivity (WPI-Farm, ratio of yield to water applied) was the highest among all treatments. Treatment A showed the lowest conversion efficiency of all treatments, indicating treatment B as the adequate deficit irrigation treatment for our Cobrançosa orchard

Scheduling the repair of aircraft components - a case study

In aircraft components maintenance shops, components are distributed amongst repair groups and their respective technicians based on the type of repair, on the technicians skills and workload, and on the customer required dates. This distribution planning is typically done in an empirical manner based on the group leader’s past experience. Such a procedure does not provide any performance guarantees, leading frequently to undesirable delays on the delivery of the aircraft components. Among others, a fundamental challenge faced by the group leaders is to decide how to distribute the components that arrive without customer required dates. This paper addresses the problems of prioritizing the randomly arriving of aircraft components (with or without pre-assigned customer required dates) and of optimally distributing them amongst the technicians of the repair groups. We proposed a formula for prioritizing the list of repairs, pointing out the importance of selecting good estimators for the interarrival times between repair requests, the turn-around-times and the man hours for repair. In addition, a model for the assignment and scheduling problem is designed and a preliminary algorithm along with a numerical illustration is presented.

Coordinated Scheduling of Wind-Thermal Gencos in Day-Ahead Markets

This paper presents a stochastic mixed-integer linear programming approach for solving the self-scheduling problem of a price-taker thermal and wind power producer taking part in a pool-based electricity market. Uncertainty on electricity price and wind power is considered through a set of scenarios. Thermal units are modeled by variable costs, start-up costs and technical operating constraints, such as: ramp up/down limits and minimum up/down time limits. An efficient mixed-integer linear program is presented to develop the offering strategies of the coordinated production of thermal and wind energy generation, aiming to maximize the expected profit. A case study with data from the Iberian Electricity Market is presented and results are discussed to show the effectiveness of the proposed approach.

Comparing pollination control bag types for sorghum seed harvest.

Efficacy of pollination bags made of new nonwoven fabrics was compared with the traditional paper bags in sorghum during 2015 using three cultivars comprising BR007B (red seeded), SC283 (white seeded) and 1167048 hybrid with tannin (brown seeded). The five pollination bag treatments were: no bagging, traditional paper bag, paper bag plus plastic screen bag for extra bird protection, duraweb®SG2 polypropylene bag and duraweb®SG1 polyester bag. There was no bird damage on tannin hybrid but birds damaged bags to access grains of the other two varieties. Varieties and bag types differed significantly, and also showed significant interactions for panicle weight (at P<0.06), seed weight and average seed weight per panicle. The tannin hybrid was consistently a better performer for all traits regardless of bag type. The paper bags were the worst for bird damage. Duraweb® SG1 was the best performer for all traits including bird damage followed by duraweb®SG2. The joint regression analysis showed that BR007B performed consistently under all bag types with average response. On the other hand, SC283 improved its response with the increasing quality of bag type at an above average rate for panicle weight and seed traits. It was concluded that new nonwoven fabric bags could replace paper bags in providing better seed production potential and greater protection against bird damage.

Monitoring of glyphosate residues in herbicide tolerant soybeans from eight production areas of Brazil - 2005/2006 and 2006/2007 harvest seasons.

2008

User scheduling for low earth orbit multi-user multiple-input-multiple-output non-terrestrial network systems

In rural and isolated areas without cellular coverage, Satellite Communication (SatCom) is the best candidate to complement terrestrial coverage. However, the main challenge for future generations of wireless networks will be to meet the growing demand for new services while dealing with the scarcity of frequency spectrum. As a result, it is critical to investigate more efficient methods of utilizing the limited bandwidth; and resource sharing is likely the only choice. The research community’s focus has recently shifted towards the interference management and exploitation paradigm to meet the increasing data traffic demands. In the Downlink (DL) and Feedspace (FS), LEO satellites with an on-board antenna array can offer service to numerous User Terminals (UTs) (VSAT or Handhelds) on-ground in FFR schemes by using cutting-edge digital beamforming techniques. Considering this setup, the adoption of an effective user scheduling approach is a critical aspect given the unusually high density of User terminals on the ground as compared to the on-board available satellite antennas. In this context, one possibility is that of exploiting clustering algorithms for scheduling in LEO MU-MIMO systems in which several users within the same group are simultaneously served by the satellite via Space Division Multiplexing (SDM), and then these different user groups are served in different time slots via Time Division Multiplexing (TDM). This thesis addresses this problem by defining a user scheduling problem as an optimization problem and discusses several algorithms to solve it. In particular, focusing on the FS and user service link (i.e., DL) of a single MB-LEO satellite operating below 6 GHz, the user scheduling problem in the Frequency Division Duplex (FDD) mode is addressed. The proposed State-of-the-Art scheduling approaches are based on graph theory. The proposed solution offers high performance in terms of per-user capacity, Sum-rate capacity, SINR, and Spectral Efficiency.

Gestione degli ordini di ‘Scheduling Agreement’ e confronto tra soluzioni di magazzino in un’azienda produttrice di macchine automatiche: il caso ACMA S.p.A.

Con la presente tesi di laurea si vuole analizzare la nuova procedura di ordini di “Scheduling Agreement” all’interno della realtà aziendale di ACMA S.p.A., azienda produttrice di macchine automatiche. Con il termine Scheduling Agreement si identifica una gestione di ordini con il fornitore, il quale mantiene i pezzi prodotti all’interno del proprio magazzino per massimo 18 mesi. L’accordo si basa sul principio per cui il fornitore ha una maggiore continuità di fornitura mentre ACMA S.p.A. vede un risparmio degli investimenti aziendali e nel tempo di approvvigionamento. Il principale focus dello studio verterà sulla proposta di soluzioni di stoccaggio per ricercare un punto di ottimo che permetta di ridurre al minimo il rischio di stock out e al tempo stesso minimizzi il livello delle scorte. L’analisi partirà con l’identificazione dei prodotti per cui risulta conveniente aprire uno Scheduling. Tale processo valutativo si estrinseca nell’analisi di due parametri fondamentali: frequenza e consumo. Verranno poi analizzati alcuni casi TO BE con il fine di trovare il Lead Time migliore per ridurre al minimo le giacenze ed evitare rotture di stock. Questi studi utilizzano il software di estrapolazione dati “SAP” per poi analizzarli sulla piattaforma Excel e forniscono una valutazione realistica nella gestione di tale procedura in ACMA S.p.A.. La soluzione conclusiva riesce a risolvere il problema di stock out introducendo la “scorta di sicurezza” calcolata sulla domanda futura. In particolare, utilizzando un Lead Time di approvvigionamento di 21 giorni si è riusciti a ridurre del 75% le scorte a magazzino rispetto al caso più cautelativo, mantenendo comunque basso il rischio di stock out. I risultati ottenuti forniranno un effettivo miglioramento delle prestazioni dell’azienda e il modello verrà sfruttato in futuro per l’applicazione iterativa della soluzione descritta, con risparmio di tempo e di fondi aziendali.

Graph-based User Scheduling for MIMO LEO-based Satellite Communication Systems

The study of the user scheduling problem in a Low Earth Orbit (LEO) Multi-User MIMO system is the objective of this thesis. With the application of cutting-edge digital beamforming algorithms, a LEO satellite with an antenna array and a large number of antenna elements can provide service to many user terminals (UTs) in full frequency reuse (FFR) schemes. Since the number of UTs on-ground are many more than the transmit antennas on the satellite, user scheduling is necessary. Scheduling can be accomplished by grouping users into different clusters: users within the same cluster are multiplexed and served together via Space Division Multiple Access (SDMA), i.e., digital beamforming or Multi-User MIMO techniques; the different clusters of users are then served on different time slots via Time Division Multiple Access (TDMA). The design of an optimal user grouping strategy is known to be an NP-complete problem which can be solved only through exhaustive search. In this thesis, we provide a graph-based user scheduling and feed space beamforming architecture for the downlink with the aim of reducing user inter-beam interference. The main idea is based on clustering users whose pairwise great-circle distance is as large as possible. First, we create a graph where the users represent the vertices, whereas an edge in the graph between 2 users exists if their great-circle distance is above a certain threshold. In the second step, we develop a low complex greedy user clustering technique and we iteratively search for the maximum clique in the graph, i.e., the largest fully connected subgraph in the graph. Finally, by using the 3 aforementioned power normalization techniques, a Minimum Mean Square Error (MMSE) beamforming matrix is deployed on a cluster basis. The suggested scheduling system is compared with a position-based scheduler, which generates a beam lattice on the ground and randomly selects one user per beam to form a cluster.

Condutividade e difusividade térmica do figo (Ficus carica L.) Roxo de Valinhos

The post harvest cooling and/or freezing processes for horticultural products have been carried out with the objective of removing the heat from these products, allowing them a bigger period of conservation. Therefore, the knowledge of the physical properties that involve heat transference in the fig fruit Roxo de Valinhos is useful for calculating projects and systems of food engineering in general, as well as, for using in equations of thermodynamic mathematical models. The values of conductivity and thermal diffusivity of the whole fig fruit-rami index were determined, and from these values it was determined the value of the specific heat. For these determination it was used the transient method of the Line Heat Source. The results shown that the fig fruit has a thermal conductivity of 0.52 W m-1°C, thermal diffusivity of 1.56 x 10-7 m² s-1, pulp density of 815.6 kg m-3 and specific heat of 4.07 kJ kg-1 °C.

Sistema de monitoramento de perdas visíveis de cana-de-açúcar em colhedora de cana picada

In the last few years the sugar-cane mechanical harvested area has increased, especially in regions with appropriated slop. The use of this technology brings some inconveniences, such as, the increase in the percentage of extraneous matter, which causes the reduction of technological quality of the raw material, and losses in the field. Extraneous matter (trash) is composed of tops and leaves in major percentage, plus soil and roots, and eventually some metal parts. In the green cane harvest system the percentage of extraneous matter has a tendency to increase due to the great amount of vegetal matter to be processed. The increase in the blower fan speed to reduce the amount of extraneous matter can lead to an unacceptable economic level of raw material losses. The main objective of this work was, using a cane loss monitor, to evaluate and quantify the amount of visible losses of sugar cane through the primary extractor at two different fan speeds. Afterwards these losses were related to the harvester cleaning efficiency. The piezoelectric transducer shows a reasonable sensibility. The results show that the cleaning efficiency in the primary extractor (85% mean), the cane losses (between 5.68% and 2.15%) and fan speed are interrelated. The total losses and specially splinters (between 3.19% and 0.91%), showed a significant difference among the treatments.

Efeitos da cobertura do solo com filme de polietileno azul no consumo de água da cultura da alface cultivada em estufa

The covering of the soil is an agricultural practice that intends to control the harmful herbs, to reduce the losses of water by evaporation of the soil, and to facilitate the harvest and the commercialization, once the product is cleaner and healthier. However, when the soil is covered important microclimatic parameters are also altered, and consequently the germination of seeds, the growth of roots, the absorption of water and nutrients, the metabolic activity of the plants and the carbohydrates storage. The current trial intended to evaluate the effect of soil covering with blue colored film on consumptive water-use in a lettuce crop (Lactuca sativa, L.). The experiment was carried out in a plastic greenhouse in Araras - São Paulo State, Brazil from March 3rd, 2001 to May 5th, 2001. The consumptive water-use was measured through two weighing lysimeter installed inside the greenhouse. Crop spacing was 0.25 m x 0.25 m and the color of the film above soil was blue. Leaf area index (IAF), was measured six times (7; 14; 21; 28; 35; 40 days after transplant) and the water-use efficiency (EU) was measured at the end. The experimental design was subdivided portions with two treatments, bare soil and covered soil. The average consumptive water-use was 4.17 mm day-1 to the bare soil treatment and 3.11 mm day-1 to the covered soil treatment. The final leaf area index was 25.23 to the bare soil treatment and 24.39 to the covered soil treatment, and there was no statistical difference between then.