Caracterização de polímeros unidimensionais (Poliacetileno, Poliazina e Poliazoeteno) através de cálculos espectroscópicos e transporte eletrônico

Neste trabalho é apresentado um estudo teórico da base neutro e bipolaron e estados excitados de moléculas a partir de polímeros isoeletrônicos compostos pelo Poliacetileno, Poliazina e Poliazoeteno. Os resultados obtidos, utilizando metodologia DFT e ab initio, revelam que uma boa descrição dos defeitos pode ser importante na investigação da transição isolante-metal de polímeros quase-unidimensional indicando um comportamento metálico em torno do nível de Fermi, como mecanismo de condutividade dos polímeros. Este resultado é consistente com dados experimentais e não faz menção a metodologia Su-Schrieffer-Heeger (SSH). E mais, os resultados são consistentes com características importantes como nanodispositivo e podem ser resumidos como: (i) poderia ser usado como retificador molecular uni-direcional com uma geometria conformacional com vantagem de pequeno acoplamento, (ii) a função de Green de não-equilíbrio presente na simulação poderia corrigir de tal maneira os Poliacetileno, Poliazina e Poliazoeteno sem corrente de porta, (iii) com base nas propriedades das ligações tipo, pode ser utilizada para projetar dispositivos com aplicações em eletrônica molecular.

Modelagem 2,5D dos campos usados no Método Eletromagnético a Multi-Frequência - EMMF

Esta tese mostra a modelagem 2,5D de dados sintéticos do Método Eletromagnético a Multi-frequência (EMMF). O trabalho é apresentado em duas partes: a primeira apresenta os detalhes dos métodos usados nos cálculos dos campos gerados por uma bobina horizontal de corrente colocada sobre a superfície de modelos bidimensionais; e a segunda, usa os resultados obtidos para simular os dados medidos no método EMMF, que são as partes real e imaginária da componente radial do campo magnético gerado pela bobina. Nesta segunda parte, observamos o comportamento do campo calculado em diversos modelos, incluindo variações nas propriedades físicas e na geometria dos mesmos, com o intuito de verificar a sensibilidade do campo observado com relação às estruturas presentes em uma bacia sedimentar. Com esta modelagem, podemos observar as características dos dados e como as duas partes, real e imaginária, contribuem com informações distintas e complementares. Os resultados mostram que os dados da componente radial do campo magnético apresentam muito boa resolução lateral, mesmo estando a fonte fixa em uma única posição. A capacidade desses dados em distinguir e resolver estruturas alvo será fundamental para o trabalho futuro de inversão, bem como para a construção de seções de resistividade aparente.

Use of synthetic aperture radar for recognition of Coastal Geomorphological Features, land-use assessment and shoreline changes in Bragança coast, Pará, Northern Brazil

Imagens de radar de abertura sintética (SAR) vem sendo bem mais utilizadas do que antes nas aplicações de geociências em regiões tropicais úmidas. Nesta investigação, uma imagem RADARSAT-1, na banda C, polarização HH adquirida em 1998 foi usada para o mapeamento costeiro e avaliação da cobertura da terra na área de Bragança, norte do Brasil. Imagem do radar aerotransportado GEMS-1000, na banda X, polarização HH, adquirida em 1972 durante o projeto RADAM foi também utilizada para avaliar as variações costeiras ocorridas nas últimas três décadas. A pesquisa tem confirmado a utilidade da imagem RADARSAT-1 para o mapeamento geomorfológico e avaliação da cobertura da terra, particularmente em costas de manguezal de macromaré. Além disso, um novo método para estimar as variações da linha de costa baseado na superposição de vetores extraídos de diferentes imagens SAR, com alta acurácia geométrica, tem mostrado que a planície costeira de Bragança tem estado sujeita a severa erosão responsável pelo recuo de aproximadamente 32 km² e acreção de 20 km², resultando em uma perda de área de manguezal de aproximadamente 12 km². Como perspectiva de aplicação, dados SAR orbitais e aerotransportados provaram ser uma importante fonte de informação tanto para o mapeamento geomorfológico, quando para o monitoramento de modificações costeiras em ambientes tropicais úmidos.

Modelamento e correção de descentralização das imagens de tempo de trânsito

As imagens da parede do poço obtidas através da ferramenta UBI (Ultrasonic Borehole Imager) são amplamente utilizadas por geólogos e engenheiros de petróleo para identificar eventos geológicos nas paredes de poços abertos e na inspeção dos tubos de revestimento, uma vez que este perfil praticamente fornece uma fotografia da parede do poço. As ferramentas de imageamento acústico produzem imagens do tempo de trânsito e da amplitude do pulso acústico gerado pela ferramenta e refletido na parede do poço. Entretanto, estas imagens podem ter uma interpretação não realista, uma vez que elas podem ter seu aspecto alterado em razão do movimento da ferramenta no interior do poço. Este trabalho apresenta o modelamento das imagens de tempo de trânsito a partir da aplicação do critério de Coulomb para a ruptura da parede do poço submetida a um estado plano de tensões, a qual fornecerá a seção do poço, que é a forma geométrica que será traçada pela ferramenta de imageamento acústico do poço. O deslocamento ascensional da ferramenta e as imperfeições da parede do poço, normalmente, são os responsáveis pelo deslocamento da posição do transdutor em relação ao eixo do poço. Este efeito pode ter grande responsabilidade nas imperfeições das imagens de tempo de trânsito. Assim, a correção dessas imagens, chamada de correção da descentralização, busca o reposicionamento do transdutor para a posição do eixo do poço. Apresenta-se, também, um método de correção do efeito da descentralização da ferramenta baseado neste modelamento. O método é proposto com base na geometria analítica plana e no método do raio para a definição do tempo de trânsito do pulso acústico, com o objetivo de reconstruir as imagens de tempo de trânsito obtidas com a ferramenta descentralizada, ou seja, corrigir estas imagens tornando-as como se fossem obtidas com a ferramenta centralizada em relação ao eixo do poço.

Leaf anatomical features of three Theobroma species (Malvaceae s.l.) native to the Brazilian Amazon

As espécies de Theobroma têm importância econômica devido a sua utilização nas indústrias cosmética e alimentícia, principalmente na produção de chocolate. Entretanto, a anatomia de suas estruturas vegetativas permanece pouco conhecida. O presente estudo teve por objetivo descrever as características anatômicas de Theobroma grandiflorum, T. speciosum e T. subincanum, como contribuição ao conhecimento biológico dessas espécies, bem como, fornecer subsídios aos estudos biotecnológicos de fruteiras nativas da Amazônia. Folhas em diferentes estágios de desenvolvimento foram coletadas e analisadas sob microscopia de luz e eletrônica de varredura. Nas folhas expandidas de T. grandiflorum e T. subincanum foram observados tricomas dos tipos estrelado séssil, pedunculado e glandular digitiforme. Estas espécies também foram similares quanto à morfologia da nervura central, à organização do mesofilo e à presença de grãos de amido no parênquima medular da nervura central. Tricomas glandulares claviformes e células mucilaginosas na epiderme do limbo foliar ocorreram somente em T. speciosum. A presença de tricomas secretores de mucilagem nos ápices vegetativos (coléteres) de todas as espécies estudadas é um novo registro para o gênero Theobroma.

Comparison between histopathologic features of leprosy in reaction lesions in HIV coinfected and non-coinfected patients

BACKGROUND: Leprosy and HIV are diseases that have a major impact on public health in Brazil. Patients coinfected with both diseases, appear to be at higher risk to develop leprosy reactions. OBJECTIVE: The aim of this study is to describe the histopathological aspects of cutaneous lesions during reactional states in a group of patients with HIV-leprosy coinfection, compared to patients with leprosy, without coinfection. METHODS: Two groups were established: group 1 comprised of 40 patients coinfected with HIV-leprosy; group 2, comprised of 107 patients with leprosy only. Patients presenting reactional states of leprosy had their lesions biopsied and comparatively evaluated. RESULTS: Reversal reaction was the most frequent feature in both groups, with dermis edema as the most common histopathological finding. Giant cells were seen in all group 1 histopathological examinations. Dermis edema was the most common finding in patients with erythema nodosum leprosum. CONCLUSION: Few histopathological differences were found in both groups, with reversal reaction as the most significant one, although this fact should be analyzed considering the predominant BT clinical form in the coinfected group and BB form in the group without HIV. Larger prospective studies in patients with HIV-leprosy coinfection are needed to confirm and broaden these results.

Investigação estrutural e efeitos imunológicos e tuberculostáticos de complexos de paládio(II)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sedimentação na bacia do Pantanal Mato-Grossense, Centro-Oeste do Brasil

The Pantanal is a Quaternary sedimentary basin located at the left margin of the Upper Paraguay River, west-central Brazil. Basin infilling was mainly by siliciclastic sediments and the stratigraphic succession exhibits an overall finingupward pattern. The depositional system tract is composed by a large meandering fluvial plain and several marginal alluvial fans, being the Taquari megafan the most striking feature. The present landscape is a complex tropical wetland, with geomorphic features derived from the present conditions and other inherited from successive Pleistocene and Holocene climates. During the Pleistocene, the sedimentary environment was dominated by braided alluvial fans, the original geometry of which is preserved as relict forms, permitting remarkable patterns of distributary paleochannels to be easily recognized in satellite images. Eolian processes were active in some abandoned lobes, contemporaneously with sedimentation in active fan lobes. Closed ponds bordered by lunette sand dunes, originally salt pans produced by eolian deflation, are relict eolian landforms in the Pantanal landscape. Eolian processes were probably more effective at the glacial maximum. Landscape has been changing in the Pantanal area since the end of the Pleistocene in adaptation to a more humid and warmer environment prevailing during Holocene. Initiation of the modern wetland has occurred during the Pleistocene / Holocene transition, with the change to a more humid climate and the individualization of lacustrine systems. The modern Pantanal wetland is a vast expanse of poorly drained lowlands that experiences annual flooding from summer to fall months. Although climatic fluctuations have occurred during all the Holocene, the alluvial fans have remained active depositional systems and lobes were formed by progradation and abandonment. Abandoned lobes were subjected... (Complete abstract click electronic address below)

Epidemiological features of esophageal cancer. Squamous cell carcinoma versus adenocarcinoma

PURPOSE: To analyze the epidemiological features of patients with esophageal cancer according to the histopathological types: squamous cell carcinoma or adenocarcinoma. METHODS: A total of 100 patients with esophageal cancer, being 50 squamous cell carcinomas and 50 adenocarcinomas were analyzed for demographics, nutritional factors, lifestyle habits, benign pathological conditions associated, like Barrett's esophagus and megaesophagus, tumor stage and survival rates. The nutritional factors evaluated included body mass index, percent weight loss, hemoglobin and albumin serum levels. RESULTS: Esophageal cancer occurred more often in men over 50 years-old in both histological groups. No significant differences on age and gender were found between the histological groups. Squamous cell carcinoma was significantly more frequent in blacks than adenocarcinoma. Alcohol consumption and smoking were significantly associated with squamous cell carcinoma. Higher values of body mass index were seen in patients with adenocarcinoma. Barrett's esophagus was found in nine patients (18%) with adenocarcinoma, and megaesophagus in two patients (4%) with squamous cell carcinoma. The majority of patients were on stages III and IV in both histological groups. The mean survival rates were 7.7 ± 9.5 months for patients with squamous cell carcinoma and 8.0 ± 10.9 months for patients with adenocarcinoma. No significant differences on tumor stage and survival rates were detected between the histological groups. CONCLUSION: Epidemiological features are distinct for the histopathological types of esophageal cancer. Squamous cell carcinoma is associated with black race, alcohol and smoking, while adenocarcinoma is related to higher body mass index, white race and Barrett's esophagus.

Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.

Ureasil-polyether hybrid blend with tuneable hydrophilic/hydrophobic features based on U-PEO1900 and U-PPO400 mixtures

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A ring system detected around the Centaur (10199) Chariklo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Geosynthetic-Reinforced Soil Structure Built to Restore Original Geometry of a 12 m High Slope After Failure Using Local Soil

This paper presents a study case in which a geosynthetic-reinforced soil (GRS) structure was used to rebuild a 12 m high slope after its failure. The failed slope is located between the parking lot of a private company and a public school. Due to surrounding structures restrictions, this project required a solution with rapidity in execution. In addition, as a requirement established by its owner, this structure should recover the original geometry of the slope. Besides the importance regarding surrounding constructions, an interesting aspect of this study case relies on the versatility of geosynthetic materials. A woven geotextile was used as reinforcement. Five other geosynthetic materials were used in this study case. Facing comprised a geocell filled with local soil cover and grass mats, resulting in a green facing. A geonet was used to hold the grass mats in place before grass roots development. Regarding the drainage system, geocomposite drains and geopipes were installed to drain subsurface water. A nonwoven geotextile was used as filter in drainage trenches, which were placed near the structure toe. Additionally to the GRS structure, the lower portion of the slope was reinforced with soil nailing technique. The face of the nailed soil portion was covered with sandbags and shotcrete. It emphasizes the flexibility of GRS structures regarding their application with other technical options in Geotechnical Engineering. The economic aspect of this study case also deserves attention. It did not require soil transportation and other design and construction steps, e.g. concrete structures design and construction.

Ultrastructural features of spermatogenesis in Melanorivulus punctatus (Cyprinodontiformes: Rivulidae)

Fish belonging to the family Rivulidae possess one of the most complex reproductive systems. Rivulus, a genus of freshwater fish in the Rivulidae family, was recently reclassified into five genera, including Melanorivulus. Its type species, M. punctatus, is widely distributed and probably represents a species complex. The ultrastructure of sperm has been broadly used in systematics, and we hereby describe the ultrastructural features of spermatogenesis in M. punctatus. Ten M. punctatus males were collected from the reservoir of Parque Estadual da Quineira, municipality of Chapada dos Guimardes, Mato Grosso, Brazil, and prepared for analysis by light microscopy and transmission electron microscopy. M. punctatus undergoes cystic spermatogenesis. Its cysts consist of groups of germ cells that are in synchronous development and are surrounded by cytoplasmic projections of Sertoli cells. With the breakdown of the cysts, the spermatozoa are released and their maturation is completed in the duct, where part of the cytoplasmic material is discarded through the vesicles. The mature spermatozoon is characterized by a spherical head with homogeneously condensed chromatin, a symmetric midpiece consisting of a pair of perpendicular centrioles, a ring of mitochondria, several vesicles, and one flagellum medial to the nucleus. Early stages of spermatogenesis show no peculiarities; however, in spermiogenesis, we observed that the spermatids remain interconnected by cytoplasmic bridges and have pockets of residual cytoplasm. The sperm is of the aquasperm type and is similar to that observed in the members of the family Rivulidae. The spermatozoa have a single flagellum that consists of a classic axoneme (9 +2), as found in most groups of fish, despite the lateral extensions. (c) 2014 Elsevier Ltd. All rights reserved.

Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective: This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.Methods: An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.Results: Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.Conclusion: Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.