Evaluating the achievements and impacts of EC framework programme transport projects

Purpose The purpose of this paper is to present what kind of elements and evaluation methods should be included into a framework for evaluating the achievements and impacts of transport projects supported in EC Framework Programmes (FP). Further, the paper discusses the possibilities of such an evaluation framework in producing recommendations regarding future transport research and policy objectives as well as mutual learning for the basis of strategic long term planning. Methods The paper describes the two-dimensional evaluation methodology developed in the course of the FP7 METRONOME project. The dimensions are: (1) achievement of project objectives and targets in different levels and (2) research project impacts according to four impact groups. The methodology uses four complementary approaches in evaluation, namely evaluation matrices, coordinator questionnaires, lead user interviews and workshops. Results Based on the methodology testing, with a sample of FP5 and FP6 projects, the main results relating to the rationale, implementation and achievements of FP projects is presented. In general, achievement of objectives in both FPs was good. Strongest impacts were identified within the impact group of management and co-ordination. Also scientific and end-user impacts of the projects were adequate, but wider societal impacts quite modest. The paper concludes with a discussion both on the theoretical and practical implications of the proposed methodology and by presenting some relevant future research needs.

Methodology to assess economic and environmental impacts of nitrogen in fertirrigation systems.

To determine the risk of nitrate pollution in agricultural systems have identified several indexes and efficiencies that may lead an effective N fertilizer management for obtain the maximum yield with minimum environmental impact and health

Impacts of projected maximum temperature extremes for C21 by an ensemble of regional climate models on cereal cropping systems in the Iberian Peninsula

Crops growing in the Iberian Peninsula may be subjected to damagingly high temperatures during the sensitive development periods of flowering and grain filling. Such episodes are considered important hazards and farmers may take insurance to offset their impact. Increases in value and frequency of maximum temperature have been observed in the Iberian Peninsula during the 20th century, and studies on climate change indicate the possibility of further increase by the end of the 21st century. Here, impacts of current and future high temperatures on cereal cropping systems of the Iberian Peninsula are evaluated, focusing on vulnerable development periods of winter and summer crops. Climate change scenarios obtained from an ensemble of ten Regional Climate Models (multimodel ensemble) combined with crop simulation models were used for this purpose and related uncertainty was estimated. Results reveal that higher extremes of maximum temperature represent a threat to summer-grown but not to winter-grown crops in the Iberian Peninsula. The study highlights the different vulnerability of crops in the two growing seasons and the need to account for changes in extreme temperatures in developing adaptations in cereal cropping systems. Finally, this work contributes to clarifying the causes of high-uncertainty impact projections from previous studies.

Repeatability and Two-Dimensionality of Model Scale Sloshing Impacts

Canonical test cases for sloshing wave impact problems are pre-sented and discussed. In these cases the experimental setup has been simpli?ed seeking the highest feasible repeatability; a rectangular tank subjected to harmonic roll motion has been the tested con?guration. Both lateral and roof impacts have been studied, since both cases are relevant in sloshing assessment and show speci?c dynamics. An analysis of the impact pressure of the ?rst four impact events is provided in all cases. It has been found that not in all cases a Gaussian ?tting of each individual peak is feasible. The tests have been conducted with both water and oil in order to obtain high and moderate Reynolds number data; the latter may be useful as simpler test cases to assess the capabilities of CFD codes in simulating sloshing impacts. The re-peatability of impact pressure values increases dramatically when using oil. In addition, a study of the two-dimensionality of the problem using a tank con?guration that can be adjusted to 4 di?erent thicknesses has been carried out. Though the kinemat-ics of the free surface does not change signi cantly in some of the cases, the impact pressure values of the ?rst impact events changes substantially from the small to the large aspect ratios thus meaning that attention has to be paid to this issue when reference data is used for validation of 2D and 3D CFD codes.

An Experimental and Numerical Study of Ballistic Impacts on a Turbine Casing Material at Varying Temperatures

An experimental and numerical study of ballistic impacts on steel plates at various temperatures (700ºC, 400ºC and room temperature) has been carried out. The motivation for this work is the blade‐off event that may occur inside a jet engine turbine. However, as a first attempt to understand this complex loading process, a somewhat simpler approach is carried out in the present work. The material used in this study is the FV535 martensitic stainless steel, which is one of the most commonly used materials for turbine casings. Based on material test data, a Modified Johnson‐Cook (MJC) model was calibrated for numerical simulations using the LS‐DYNA explicit finite element code (see Figure 1). To check the mesh size sensitivity, 2D axisymmetric finite element models with three different mesh sizes and configurations were used for the various temperatures. Two fixed meshes with 64 and 128 elements over the 2mm thick plate and one mesh with 32 elements over the thickness with adaptive remeshing were used in the simulations. The formation of adiabatic shear bands in the perforation process has been found critical in order to achieve good results. Adiabatic shear bands are formed by the temperature rise due to the accumulation of plastic strain during impact (see Figure 2). The influence of the thermal softening in the plastic model has hence been analyzed for the room temperature impact tests, where the temperature gradient is highest

Impacts and adaptive capacity as drivers for prioritizing agricultural adaptation to climate change in Europe

In the face of likely climate change impacts policy makers at different spatial scales need access to assessment tools that enable informed policy instruments to be designed. Recent scientific advances have facilitated the development of improved climate projections, but it remains to be seen whether these are translated into effective adaptation strategies. This paper uses existing databases on climate impacts on European agriculture and combines them with an assessment of adaptive capacity to develop an interdisciplinary approach for prioritising policies. It proposes a method for identifying relevant policies for different EU countries that are representative of various agroclimatic zones. Our analysis presents a framework for integrating current knowledge of future climate impacts with an understanding of the underlying socio-economic, agricultural and environmental traits that determine a region’s capacity for adapting to climate change.

Impact attribution models to evaluate drought effects: economic impacts, risk analyses and management strategies in Spain and Chile

La sequía es un fenómeno natural que se origina por el descenso de las precipitaciones con respecto a una media, y que resulta en la disponibilidad insuficiente de agua para alguna actividad. La creciente presión que se ha venido ejerciendo sobre los recursos hídricos ha hecho que los impactos de la sequía se hayan visto agravados a la vez que ha desencadenado situaciones de escasez de agua en muchas partes del planeta. Los países con clima mediterráneo son especialmente vulnerables a las sequías, y, su crecimiento económico dependiente del agua da lugar a impactos importantes. Para reducir los impactos de la sequía es necesaria una reducción de la vulnerabilidad a las sequías que viene dada por una gestión más eficiente y por una mejor preparación. Para ello es muy importante disponer de información acerca de los impactos y el alcance de este fenómeno natural. Esta investigación trata de abarcar el tema de los impactos de las sequías, de manera que plantea todos los tipos de impactos que pueden darse y además compara sus efectos en dos países (España y Chile). Para ello se proponen modelos de atribución de impactos que sean capaces de medir las pérdidas económicas causadas por la falta de agua. Los modelos propuestos tienen una base econométrica en la que se incluyen variables clave a la hora de evaluar los impactos como es una variable relacionada con la disponibilidad de agua, y otras de otra naturaleza para distinguir los efectos causados por otras fuentes de variación. Estos modelos se adaptan según la fase del estudio en la que nos encontremos. En primer lugar se miden los impactos directos sobre el regadío y se introduce en el modelo un factor de aleatoriedad para evaluar el riesgo económico de sequía. Esto se hace a dos niveles geográficos (provincial y de Unidad de Demanda Agraria) y además en el último se introduce no solo el riesgo de oferta sino también el riesgo de demanda de agua. La introducción de la perspectiva de riesgo en el modelo da lugar a una herramienta de gestión del riesgo económico que puede ser utilizada para estrategias de planificación. Más adelante una extensión del modelo econométrico se desarrolla para medir los impactos en el sector agrario (impactos directos sobre el regadío y el secano e impactos indirectos sobre la Agro Industria) para ello se adapta el modelo y se calculan elasticidades concatenadas entre la falta de agua y los impactos secundarios. Por último se plantea un modelo econométrico para el caso de estudio en Chile y se evalúa el impacto de las sequías debidas al fenómeno de La Niña. iv Los resultados en general muestran el valor que brinda el conocimiento más preciso acerca de los impactos, ya que en muchas ocasiones se tiende a sobreestimar los daños realmente producidos por la falta de agua. Los impactos indirectos de la sequía confirman su alcance a la vez que son amortiguados a medida que nos acercamos al ámbito macroeconómico. En el caso de Chile, su diferente gestión muestra el papel que juegan el fenómeno de El Niño y La Niña sobre los precios de los principales cultivos del país y sobre el crecimiento del sector. Para reducir las pérdidas y su alcance se deben plantear más medidas de mitigación que centren su esfuerzo en una gestión eficiente del recurso. Además la prevención debe jugar un papel muy importante para reducir los riesgos que pueden sufrirse ante situaciones de escasez. ABSTRACT Drought is a natural phenomenon that originates by the decrease in rainfall in comparison to the average, and that results in water shortages for some activities. The increasing pressure on water resources has augmented the impact of droughts just as water scarcity has become an additional problem in many parts of the planet. Countries with Mediterranean climate are especially vulnerable to drought, and its waterdependent economic growth leads to significant impacts. To reduce the negative impacts it is necessary to deal with drought vulnerability, and to achieve this objective a more efficient management is needed. The availability of information about the impacts and the scope of droughts become highly important. This research attempts to encompass the issue of drought impacts, and therefore it characterizes all impact types that may occur and also compares its effects in two different countries (Spain and Chile). Impact attribution models are proposed in order to measure the economic losses caused by the lack of water. The proposed models are based on econometric approaches and they include key variables for measuring the impacts. Variables related to water availability, crop prices or time trends are included to be able to distinguish the effects caused by any of the possible sources. These models are adapted for each of the parts of the study. First, the direct impacts on irrigation are measured and a source of variability is introduced into the model to assess the economic risk of drought. This is performed at two geographic levels provincial and Agricultural Demand Unit. In the latter, not only the supply risk is considered but also the water demand risk side. The introduction of the risk perspective into the model results in a risk management tool that can be used for planning strategies. Then an extension of the econometric model is developed to measure the impacts on the agricultural sector (direct impacts on irrigated and rainfed productions and indirect impacts on the Agri-food Industry). For this aim the model is adapted and concatenated elasticities between the lack of water and the impacts are estimated. Finally an econometric model is proposed for the Chilean case study to evaluate the impact of droughts, especially caused by El Niño Southern Oscillation. The overall results show the value of knowing better about the precise impacts that often tend to be overestimated. The models allow for measuring accurate impacts due to the lack of water. Indirect impacts of drought confirm their scope while they confirm also its dilution as we approach the macroeconomic variables. In the case of Chile, different management strategies of the country show the role of ENSO phenomena on main crop prices and on economic trends. More mitigation measures focused on efficient resource management are necessary to reduce drought losses. Besides prevention must play an important role to reduce the risks that may be suffered due to shortages.

Transportation infrastructure impacts on firm location: the effect of a new metro line in the suburbs of Madrid

Firm location patterns emerge as a consequence of multiple factors, including firm considerations, labor force availability, market opportunities, and transportation costs. Many of these factors are influenced by changes in accessibility wrought by new transportation infrastructure. In this paper we use spatial statistical techniques and a micro-level data base to evaluate the effects of Madrid?s metro line 12 (known as Metrosur) expansion on business location patterns. The case study is the municipality of Alcorcon, which is served by the new metro line since 2003. Specifically, we explore the location patterns by different industry sectors, to evaluate if the new metro line has encouraged the emergence of a ?Metrosur spatial economy?. Our results indicate that the pattern of economic activity location is related to urban accessibility and that agglomeration, through economies of scale, also plays an important role. The results presented in this paper provide evidence useful to inform efficient transportation, urban, and regional economic planning.

Efficiency and spatial equity impacts of high-speed rail extensions in urban areas

Urban areas benefit from significant improvements in accessibility when a new high speed rail (HSR) project is built. These improvements, which are due mainly to a rise in efficiency, produce locational advantagesand increase the attractiveness of these cities, thereby possibly enhancing their competitivenessand economic growth. However, there may be equity issues at stake, as the main accessibility benefits are primarily concentrated in urban areas with a HSR station, whereas other locations obtain only limited benefits. HSR extensions may contribute to an increase in spatial imbalance and lead to more polarized patterns of spatial development. Procedures for assessing the spatial impacts of HSR must therefore follow a twofold approach which addresses issues of both efficiency and equity. This analysis can be made by jointly assessing both the magnitude and distribution of the accessibility improvements deriving from a HSR project. This paper describes an assessment methodology for HSR projects which follows this twofold approach. The procedure uses spatial impact analysis techniques and is based on the computation of accessibility indicators, supported by a Geographical Information System (GIS). Efficiency impacts are assessed in terms of the improvements in accessibility resulting from the HSR project, with a focus on major urban areas; and spatial equity implications are derived from changes in the distribution of accessibility values among these urban agglomerations.

Climate Change Impacts on Maize and Dry Bean Yields of smallholder farmers in Honduras

The rotation maize and dry bean provides the main food supply of smallholder farmers in Honduras. Crop model assessment of climate change impacts (2070?2099 compared to a 1961?1990 baseline) on a maize?dry bean rotation for several sites across a range of climatic zones and elevations in Honduras. Low productivity systems, together with an uncertain future climate, pose a high level of risk for food security. The cropping systems simulation dynamic model CropSyst was calibrated and validated upon field trail site at Zamorano, then run with baseline and future climate scenarios based upon general circulation models (GCM) and the ClimGen synthetic daily weather generator. Results indicate large uncertainty in crop production from various GCM simulations and future emissions scenarios, but generally reduced yields at low elevations by 0 % to 22 % in suitable areas for crop production and increased yield at the cooler, on the hillsides, where farming needs to reduce soil erosion with conservation techniques. Further studies are needed to investigate strategies to reduce impacts and to explore adaptation tactics.

Implementation of a module for risk of ozone impacts assessment to vegetation in the integrated assessment modelling system for the Iberian peninsula. Evaluation for wheat and holm oak

A module to estimate risks of ozone damage to vegetation has been implemented in the Integrated Assessment Modelling system for the Iberian Peninsula. It was applied to compute three different indexes for wheat and Holm oak; daylight AOT40 (cumulative ozone concentration over 40 ppb), cumulative ozone exposure index according to the Directive 2008/50/EC (AOT40-D) and PODY (Phytotoxic Ozone Dose over a given threshold of Y nmol m−2 s−1). The use of these indexes led to remarkable differences in spatial patterns of relative ozone risks on vegetation. Ozone critical levels were exceeded in most of the modelling domain and soil moisture content was found to have a significant impact on the results. According to the outputs of the model, daylight AOT40 constitutes a more conservative index than the AOT40-D. Additionally, flux-based estimations indicate high risk areas in Portugal for both wheat and Holm oak that are not identified by AOT-based methods.

Employment rate impacts of charging the Heavy Good Vehicle corridor (Madrid-Sevilla) across Spanish regions: a Random Utility Based Multiregional Input-Output approach

The implementation of a charging policy for heavy goods vehicles in European Union (EU) member countries has been imposed to reflect costs of construction and maintenance of infrastructure as well as externalities such as congestion, accidents and environmental impact. In this context, EU countries approved the Eurovignette directive (1999/62/EC) and its amending directive (2006 /38/EC) which established a legal framework to regulate the system of tolls. Even if that regulation seek s to increase the efficien cy of freight, it will trigger direct and indirect effects on Spain’s regional economies by increasing transport costs. This paper presents the development of a multiregional Input-Output methodology (MRIO) with elastic trade coefficients to predict in terregional trade, using transport attributes integrated in multinomial logit models. This method is highly useful to carry out an ex-ante evaluation of transport policies because it involves road freight transport cost sensitivity, and determine regional distributive and substitution economic effect s of countries like Spain, characterized by socio-demographic and economic attributes, differentiated region by region. It will thus be possible to determine cost-effective strategies, given different policy scenarios. MRIO mode l would then be used to determine the impact on the employment rate of imposing a charge in the Madrid-Sevilla corridor in Spain. This methodology is important for measuring the impact on the employment rate since it is one of the main macroeconomic indicators of Spain’s regional and national economic situation. A previous research developed (DESTINO) using a MRIO method estimated employment impacts of road pricing policy across Spanish regions considering a fuel tax charge (€/liter) in the entire shortest cost path network for freight transport. Actually, it found that the variation in employment is expected to be substantial for some regions, and negligible for others. For example, in this Spanish case study of regional employment has showed reductions between 16.1% (Rioja) and 1.4% (Madrid region). This variation range seems to be related to either the intensity of freight transport in each region or dependency of regions to transport intensive economic sect ors. In fact, regions with freight transport intensive sectors will lose more jobs while regions with a predominantly service economy undergo a fairly insignificant loss of employment. This paper is focused on evaluating a freight transport vehicle-kilometer charge (€/km) in a non-tolled motorway corridor (A-4) between Madrid-Sevilla (517 Km.). The consequences of the road pricing policy implementation show s that the employment reductions are not as high as the diminution stated in the previous research because this corridor does not affect the whole freight transport system of Spain.

Impacts of the EU Biofuel Target on Agricultural Markets and Land Use - A Comparative Modelling Assessment

The Renewable Energy Directive (2009/28/EC) requires that 20% of the EU's energy needs should come from renewable sources by 2020, and includes a target for the transport sector of 10% from biofuels. This report analyses and discusses the global impacts of this biofuel target on agricultural production, markets and land use, as simulated by three agricultural sector models, AGLINK-COSIMO, ESIM and CAPRI. The impacts identified include higher EU production of ethanol and biodiesel, and of the crops used to produce them, as well as more imports of both biofuels. Trade flows of biofuel feedstocks also change to reflect greater EU demand, including a significant increase in vegetable oil imports. However, as the extra demand is small in world market terms, the impact on world market prices is limited. With the EU biofuel target, global use of land for crop cultivation is higher by 5.2 million hectares. About one quarter is area within the EU, some of which would otherwise have left agriculture.

Sensing physical stage of fruits by their response to non destructive impacts.

Fruits of two varieties of both apples and pears were tested in the laboratory to measure their response to a small energy impact applied by an impact tester. Samples of fruits of increasing maturity were tested during several weeks. Non-destructive impacts and other destructive and non-destructive measurements of post-harvest ripeness were applied. A new software was created to control the impact test, calculate the eleven parameters, and sort out the fruit. This software needs a data base and may create new ones. The implementation of an on-line impact device for automatic detection of texture is being designed (patent pending).

Direct and indirect economic impacts of drought in the agri-food sector in the Ebro River basin (Spain).

The economic evaluation of drought impacts is essential in order to define efficient and sustainable management and mitigation strategies. The aim of this study is to evaluate the economic impacts of a drought event on the agricultural sector and measure how they are transmitted from primary production to industrial output and related employment. We fit econometric models to determine the magnitude of the economic loss attributable to water storage. The direct impacts of drought on agricultural productivity are measured through a direct attribution model. Indirect impacts on agricultural employment and the agri-food industry are evaluated through a nested indirect attribution model. The transmission of water scarcity effects from agricultural production to macroeconomic variables is measured through chained elasticities. The models allow for differentiating the impacts deriving from water scarcity from other sources of economic losses. Results show that the importance of drought impacts are less relevant at the macroeconomic level, but are more significant for those activities directly dependent on water abstractions and precipitation. From a management perspective, implications of these findings are important to develop effective mitigation strategies to reduce drought risk exposure.