Development and energy balance of sugarcane in the norte fluminense, Brazil

The growing concern for renewable and cleaner energy sources has increased the demand for biofuels, pointing out the ethanol from sugarcane. The aim of this study was quantify the partition of energy balance components and monitor the physiological development indexes of the sugarcane, relating them to water availability conditions of climate and soil in Campos dos Goytacazes, Norte Fluminense, Brazil. To this end, a micrometeorological station was settled in an area of 13 ha in commercial cultivation. The culture was regularly monitored at 85, 102, 128, 149, 174, 194, 215, 235, 255 and 280 days after cutting (DAC). The variations in water availability directly influenced the rates of crop growth and energy balance. Under the conditions studied most of the available energy (53%) was consumed by the latent heat flux.

Estimation of water transit time in soils under Amazon forest cover using variations in sigma18O values.

In an attempt to estimate the soil-water transit time using the variation in 18O values, a statistical model was used. This model is based on linear regression analysis applied to the values observed for soil water and rain water. The time obtained from these correlations represents the mean time necessary for the water to run from one collecting point to the next.-from Authors

Amazon fisheries. I. - Variations in the relative abundance of tambaqui ( Colossoma macropomum Cuvier, 1818) based on catch and effort data of the gill-net fisheries.

Adjusted mean catches which are calculated discounting the effect of average fishing effort increase the further the lake is from Manaus, Brazil. -from Author

The respiratory responses of an amphibious snail Pomacea lineata (spix, 1827), to temperature and oxygen tension variations

1. 1. The respiratory responses of Pomacea lineata to short-term (or acute) exposure to temperature and oxygen tension variations were investigated in animals acclimated to 25°C. 2. 2. The respiratory rates increased with rising temperatures; this increase was sharper between 15 and 25°C than at any other temperature interval; a tendency to a plateau in the RT curve was recorded between 25 and 35°C. 3. 3. All animals survived well to 1 hr exposure to the extreme temperatures used (5 and 40°C). 4. 4. In two different experimental approaches, the animals showed ability to regulate the respiratory rate in declining oxygen tensions, at least down to 10% (70.8 mmHg) oxygen. 5. 5. After 1 hr exposure to hypoxic conditions, P. lineata exhibited the pattern of underpayment of the oxygen debt acquired. 6. 6. Six out of ten animals survived after 40 days in anoxia (100% nitrogen). © 1987.

Diurnal and seasonal variations of CWSI and non-water-stressed baseline with nectarine trees

The work described was part of the programme, Innovative biological indicators to improve the efficiency of water and nitrogen use and the fruit quality in tree crops Project, a partnership between ISA and INRA. Field studies were conducted in Portugal on different irrigated plots of nectarine trees; a fully irrigated (unstressed plot) and a plot that was not irrigated for some days (stressed plot). The aim of this work was to investigate the effects of plant water stress on canopy temperature, to determine the nonwater-stressed baseline and to observe diurnal and seasonal variations of Crop Water Stress Index (CWSI). Canopy temperature, psychrometric and wind speed data were taken each half-hour, between 9:30 and 15:30 h. Results showed that canopy temperature was higher during the daytime, for both unstressed and stressed plots. A linear regression of canopy-air temperature differential and the vapor pressure deficit (non-water-stress baseline) showed a r2= 0.65. During the stress period, the average canopy temperature of the stressed plot was up to 5.4°C higher than the unstressed plot. Diurnal and seasonal average of CWSI values showed differences between unstressed and stressed plots, during the stress period.

An hydrochemical answer to a legislative demand involving health risk related to water quality

Effluents and surface waters around an area involved with the inking of tissues at Itatiba municipality, São Paulo State, Brazil, were chemically analyzed with the purpose of evaluating the influence on the water quality of the chemicals released, as well to provide answers to legislative requirements related to the São Paulo State Register 997 published on 31 May 1976.

Morphometric variations in the housefly, Musca domestica (L.) with latitude

Morphologic analysis of geographic strains of Musca domestica carried out on natural and laboratory experiments starting with 400 and 800 eggs showed phenotypic variations related with latitude. Females of the natural populations showed clines for several morphological traits of the wing, whereas male flies showed a reduction in the dispersion measures (s2 and CV) of wing width and length. The same reduction was obtained for males, females and total number of flies of the natural populations in dispersion of the number of bristles on the fourth abdominal sternite. A significant negative correlation was observed for the head width of females and for the total number of flies emerged in the laboratory experiments started with 400 eggs. All flies produced by the experiments starting with 800 eggs showed a reduction in variability of dispersion of the bristles on the fourth abdominal sternite in the strains obtained from locations south of the area analyzed. Evolutionary aspects of these correlation coefficients between morphometric traits and latitude are discussed.

Spinning reserve opportunity cost in hydroelectric plants

Starting from the deregulated process of the Electric Sector, there was the need to attribute responsibilities to several agents and to elaborate appropriate forms of remuneration of the services rendered by the same. One of the services of great importance within this new electric sector is the Ancillary Services. Among the various types of Ancillary Services, Spinning Reserve is a service necessary for maintaining the integrity of the transmission system from either generation interruptions or load variations. This paper uses the application of the Economic Dispatch theory with the objective of quantifies the availability of Spinning Reserve supply in hydroelectric plants. The proposed methodology utilizes the generating units as well as their efficiencies so as to attend the total demand with the minimum water discharge. The proposed methodology was tested through the data provided by the Água Vermelha Hydroelectric Power Plant. These tests permitted the opportunity cost valuation to the Spinning Reserve supply in hydroelectric plants. © 2005 IEEE.

Usage of enterprise modeling processes and information systems design to forecast demand

Managing the great complexity of enterprise system, due to entities numbers, decision and process varieties involved to be controlled results in a very hard task because deals with the integration of its operations and its information systems. Moreover, the enterprises find themselves in a constant changing process, reacting in a dynamic and competitive environment where their business processes are constantly altered. The transformation of business processes into models allows to analyze and redefine them. Through computing tools usage it is possible to minimize the cost and risks of an enterprise integration design. This article claims for the necessity of modeling the processes in order to define more precisely the enterprise business requirements and the adequate usage of the modeling methodologies. Following these patterns, the paper concerns the process modeling relative to the domain of demand forecasting as a practical example. The domain of demand forecasting was built based on a theoretical review. The resulting models considered as reference model are transformed into information systems and have the aim to introduce a generic solution and be start point of better practical forecasting. The proposal is to promote the adequacy of the information system to the real needs of an enterprise in order to enable it to obtain and accompany better results, minimizing design errors, time, money and effort. The enterprise processes modeling are obtained with the usage of CIMOSA language and to the support information system it was used the UML language.

Daytime variations in glucose tolerance in people with impaired glucose tolerance

To determine whether glucose tolerance varies throughout the day in people with impaired glucose tolerance (IGT). We studied 15 healthy IGT, and 18 matched normal glucose tolerant (NGT) individuals. Blood samples were taken every 30-120 min during a 24 h period in which all individuals had three mixed meals and nocturnal sleep. We measured glucose, free fatty acids, specific insulin, intact proinsulin, cortisol and growth hormone. Variable responses were considered as concentrations and areas under the curves. Comparison between the groups was by Student's t-test, Mann-Whitney, and analysis of variance. Higher total glucose response, inappropriate normal total insulin response, and unproportionally increased proinsulin total response were observed in the IGT group. Lower glucose tolerance occurred in IGT after dinner, as in the NGT, and after breakfast associated with increased insulin response after breakfast, and similar proinsulin response after all three meals. IGT had higher glucose response than NGT after breakfast and lunch, similar insulin responses, and increased proinsulin-insulin ratio after all three meals. Data from this study demonstrate that IGT individuals present lower glucose tolerance in the evening, as those with NGT, and in the morning, as reported in patients with type 2 diabetes. © 2006 Elsevier B.V. All rights reserved.

Stimulus of demand, investment and acceleration of the rate of growth

Includes bibliography

Transmission network expansion planning considering uncertainty in generation and demand

This paper presents a mathematical model and a methodology to solve a transmission network expansion planning problem considering uncertainty in demand and generation. The methodology used to solve the problem, finds the optimal transmission network expansion plan that allows the power system to operate adequately in an environment with uncertainty. The model presented results in an optimization problem that is solved using a specialized genetic algorithm. The results obtained for known systems from the literature show that cheaper plans can be found satisfying the uncertainty in demand and generation. ©2008 IEEE.

Properties advanced of the silicon nitride based ceramics and recent performance on automotive parts manufacture by machining process: Advanced Ceramics, demand Forecast

Automotive parts manufacture by machining process using silicon nitride-based ceramic tool development in Brazil already is a reality. Si 3N4-based ceramic cutting tools offer a high productivity due to their excellent hot hardness, which allows high cutting speeds. Under such conditions the cutting tool must be resistant to a combination of mechanical, thermal and chemical attacks. Silicon nitride based ceramic materials constitute a mature technology with a very broad base of current and potential applications. The best opportunities for Si3N 4-based ceramics include ballistic armor, composite automotive brakes, diesel particulate filters, joint replacement products and others. The goal of this work was to show latter advance in silicon nitride manufacture and its recent evolution on machining process of gray cast iron, compacted graphite iron and Ti-6Al-4V. Materials characterization and machining tests were analyzed by X-Ray Diffraction, Scanning Electron Microscopy, Vickers hardness and toughness fracture and technical norm. In recent works the authors has been proved to advance in microstructural, mechanical and physic properties control. These facts prove that silicon nitride-based ceramic has enough resistance to withstand the impacts inherent to the machining of gray cast iron (CI), compacted graphite iron (CGI) and Ti-6Al-4V (6-4). Copyright © 2008 SAE International.