Morphological studies on castes of Protopolybia chartergoides (Hymenoptera, Vespidae, Epiponini) observed in colonies during male production stage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Studying nonlinear effects on the early stage of phase ordering using a decomposition method

Nonlinear effects on the early stage of phase ordering are studied using Adomian's decomposition method for the Ginzburg-Landau equation for a nonconserved order parameter. While the long-time regime and the linear behavior at short times of the theory are well understood, the onset of nonlinearities at short times and the breaking of the linear theory at different length scales are less understood. In the Adomians decomposition method, the solution is systematically calculated in the form of a polynomial expansion for the order parameter, with a time dependence given as a series expansion. The method is very accurate for short times, which allows to incorporate the short-time dynamics of the nonlinear terms in a analytical and controllable way. (c) 2005 Elsevier B.V. All rights reserved.

Morphology of eggs of Dioctophyme renale Goeze, 1782 (Nematoda: Dioctophymatidae) and influences of temperature on development of first-stage larvae in the eggs

Este estudo teve a finalidade de fornecer dados morfológicos de ovos de D. renale e do desenvolvimento de larvas de primeiro estádio em ovos mantidos em diferentes temperaturas. Os ovos foram obtidos por centrífugação da urina de cães parasitados e colocados em placas de Petri em estufa BOD, durante 90 dias. O experimento consistiu de três tratamentos (GI - 15 ºC, GII - 20 ºC e GIII - 26 ºC) com cinco repetições cada. Os ovos apresentaram tamanho médio de 67,23 x 42,78 µm, e o tempo médio de incubação foi inversamente proporcional à temperatura de incubação e as larvas apresentaram motilidade por aproximadamente uma semana após sua formação.

Expression of p53, Ki-67, and CD31 in the vaginal margins of radical hysterectomy in patients with stage IB carcinoma of the cervix

Objectives. This study was undertaken to evaluate the expression of p53, Ki-67, and CD31 both in the tumor and in the vaginal margins of radical hysterectomy in patients with stage IB squamous cell carcinoma of the cervix, as an attempt to use these proteins as possible markers for residual tumor in cervical cancer.Methods. Thirty patients with stage IB squamous cell carcinoma of the cervix were submitted to radical hysterectomy (study group), and thirty patients with uterine myoma were submitted to vaginal hysterectomy (control group) and were prospectively studied from November 2001 to September 2002. Tissue samples were taken from the tumor or cervix, anterior vaginal margin (AVM), and posterior vaginal margin (PVM) and were immunohistochemically evaluated by monoclonal antibodies for p53, Ki-67, and CD31. Vaginal samples in which the histological examination showed tumor involvement were excluded from the study.Results. Patient's mean age was 48.7 +/- 10.4 years (27-73 years). The clinical stage was IB1 in 22 patients (73.3%) and IB2 in eight patients (26.7%). The expressions of p53, Ki-67, and CD31 were significantly higher in the tumor than in the benign cervix (P < 0.001). Higher expressions of these markers were noted in the vaginal margins of radical hysterectomy in patients with cervical carcinoma compared to the vaginal margins of control patients. This association was demonstrated for p53 in the AVM proximal (P = 0.045), for Ki-67 in AVM proximal (P < 0.001), AVM distal (P < 0.001), PVM proximal (P = 0.009), and PVM distal (P < 0.001), and for CD31 in AVM proximal (P = 0.003) and AVM distal (P = 0.018). There was no difference in p53, Ki-67, and CD31 expression between the proximal and distal regions of the vaginal margins in patients with carcinoma of the cervix.Conclusion. The expressions of p53, Ki-67, and CD31 were significantly higher in both the histologically positive (cervical tumor) and negative (vaginal margins) tissues of patients who had undergone radical hysterectomy for cervical cancer compared to the benign control tissues. (C) 2004 Elsevier B.V. All rights reserved.

Effect of fruit maturation stage and light on seed germination of Aiphanes aculeata

Despite their spiny nature, Aiphanes palms are popular as ornamentals. They can be grown in various soil conditions, but achieve fast, luxuriant growth in sheltered positions with plenty of water. Shaded conditions are the best when plants are young. The objective of this study was to evaluate the effect of fruit maturation stage and light on the germination of seeds of A. aculeata. Fruits were collected at three different maturation stages: (1) yellow, (2) red, (3) collected on the ground without the fleshy mesocarp (removed by birds and insects). The fleshy mesocarp was also removed in treatments (1) and (2). All fruits were then treated with thiram and 25 seeds per plot were seeded in trays full of sand. The treatments (2) and (3) were subdivided in two other treatments: (a) 12 h photoperiod, (b) continuous darkness. The temperature was maintained at 30 degrees C. Seed germination began 34 days after sowing. After 160 days, the final germination percentage was (1) 54,67%, (2a) 61,33%, (2b) 65,33%, (3a) 38,00% and (3b) 45,33%. The best treatment was (2) independently of the light conditions.

Joint (X)over-bar and R charts with two-stage samplings

When joint (X) over bar and R charts are in use, samples of fixed size are regularly taken from the process, and their means and ranges are plotted on the (X) over bar and R charts, respectively. In this article, joint (X) over bar and R charts have been used for monitoring continuous production processes. The sampling is performed, in two stages. During the first stage, one item of the sample is inspected and, depending on the result, the sampling is interrupted if the process is found to be in control; otherwise, it goes on to the second stage, where the remaining sample items are inspected. The two-stage sampling procedure speeds up the detection of process disturbances. The proposed joint (X) over bar and R charts are easier to administer and are more efficient than the joint (X) over bar and R charts with variable sample size where the quality characteristic of interest can be evaluated either by attribute or variable. Copyright (C) 2004 John Wiley Sons, Ltd.

Economic design of two-stage (X)over-bar charts: the Markov chain approach

When the (X) over bar chart is in use, samples are regularly taken from the process, and their means are plotted on the chart. In some cases, it is too expensive to obtain the X values, but not the values of a correlated variable Y. This paper presents a model for the economic design of a two-stage control chart, that is. a control chart based on both performance (X) and surrogate (Y) variables. The process is monitored by the surrogate variable until it signals an out-of-control behavior, and then a switch is made to the (X) over bar chart. The (X) over bar chart is built with central, warning. and action regions. If an X sample mean falls in the central region, the process surveillance returns to the (Y) over bar chart. Otherwise. The process remains under the (X) over bar chart's surveillance until an (X) over bar sample mean falls outside the control limits. The search for an assignable cause is undertaken when the performance variable signals an out-of-control behavior. In this way, the two variables, are used in an alternating fashion. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A study is performed to examine the economic advantages of using performance and surrogate variables. (C) 2003 Elsevier B.V. All rights reserved.

The non-central chi-square chart with two-stage samplings

In this paper, we consider the non-central chi-square chart with two stage samplings. During the first stage, one item of the sample is inspected and, depending on the result, the sampling is either interrupted, or it goes on to the second stage, where the remaining sample items are inspected and the non-central chi-square statistic is computed. The proposed chart is not only more sensitive than the joint (X) over bar and R charts, but operationally simpler too, particularly when appropriate devices, such as go-no-go gauges, can be used to decide if the sampling should go on to the second stage or not. (c) 2004 Elsevier B.V. All rights reserved.

Yield and quality of carrot seeds, cv. Brasilia, as a result of plant population, gibberellic acid and stage of maturity

'Brasilia' is a cultivar of carrot with characteristics suiting cultivation under hot conditions but with problems in seed production, arising from the conflicting requirements of root and seed production. One solution is to select cultivars requiring vernalisation and then to use GA(3) to induce flowering where the climate prevents this. There is, however, little information on plant population, seed maturity and harvesting time on which to base such a procedure. Accordingly this research was carried out to study the physiological quality and production of the seeds in plant populations from 25,000 to 800,000 plants/ha, in the seed-to-seed method of cv. Brasilia in Anapolis, GO, Brazil. In each population, two harvest methods (from first and second orders of umbels, or selected harvest, and remaining orders, or total harvest) and two stages of maturity (brownish, or mature seeds, and yellowish, or immature ones) were also evaluated. Two trials were carried out, with and without gibberellic acid. Seed was evaluated for physical characters, germination, vigour, 1000-seed weight, water content, dry matter and productivity. Seed was produced in both experiments (with or without GA3 spraying). Mature seed showed germination at least 30% greater than immature, and seed from the selected harvest showed germination 16% greater than from the total harvest. In increasing plant population to 200,000 plants/ha, seed quality was not affected, but productivity increased.

Use of carbon dioxide (CO2) laser radiation in exposure of implants (stage II): A metallography evaluation in dogs

In this study we analyzed possible damages that vaporization from laser radiation could cause to implant material. Fifteen standard titanium implants, measuring 3.75 mm in diameter by 7 mm in length, were placed into the upper and lower jaws of three dogs according to Branemark's system. After osseointegration, all implants were exposed. In group I (control) conventional exposure with a punch was used; in group II, a CO2 laser with 2 W (power density: 256 W/cm(2); fluency: 0.077 J/cm(2), and a pulse mode of 0.30 ms) was used, and in group III 4 W (power density: 512 W/cm(2), fluency: 0.154 J/cm(2), and a pulse mode of 0.30 ms) was used. After vaporization, the cover screws were removed and sent for metallographic examination. The results showed that cover screws irradiated with 2 and 4 W power caused no superficial or microstructural alteration. The results also showed that the prescribed power densities, fluencies, and the use of the pulse mode were suitable for exposing implants without damage to tissue or implant material. (C) 2002 Laser Institute of America.

Audouinella macrospora (Acrochaetiaceae, Rhodophyta) is the Chantransia stage of Batrachospermum (Batrachospermaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sn-polymetallic greisen-type deposits associated with late-stage rapakivi granites, Brazil: fluid inclusion and stable isotope characteristics

Tin-polymetallic greisen-type deposits in the Itu Rapakivi Province and Rondonia Tin Province, Brazil are associated with late-stage rapakivi fluorine-rich peraluminous alkali-feldspar granites. These granites contain topaz and/or muscovite or zinnwaldite and have geochemical characteristics comparable to the low-P sub-type topaz-bearing granites. Stockworks and veins are common in Oriente Novo (Rondonia Tin Province) and Correas (Itu Rapakivi Province) deposits, but in the Santa Barbara deposit (Rondonia Tin Province) a preserved cupola with associated bed-like greisen is predominant. The contrasting mineralization styles reflect different depths of formation, spatial relationship to tin granites, and different wall rock/fluid proportions. The deposits contain a similar rare-metal suite that includes Sri (+/-W, +/-Ta, +/-Nb), and base-metal suite (Zn-Cu-Pb) is present only in Correas deposit. The early fluid inclusions of the Correas and Oriente Novo deposits are (1) low to moderate-salinity (0-19 wt.% NaCl eq.) CO2-bearing aqueous fluids homogenizing at 245-450 degreesC, and (2) aqueous solutions with low CO2, low to moderate salinity (0-14 wt.% NaCl eq.), which homogenize between 100 and 340 T. In the Santa Barbara deposit, the early inclusions are represented by (1) low-salinity (5-12 wt.% NaCl eq.) aqueous fluids with variable CO2 contents, homogenizing at 340 to 390 T, and (2) low-salinity (0-3 wt.% NaCl eq.) aqueous fluid inclusions, which homogenize at 320380 degreesC. Cassiterite, wolframite, columbite-tantalite, scheelite, and sulfide assemblages accompany these fluids. The late fluid in the Oriente Novo and Correas deposit was a low-salinity (0-6 wt.% NaCl eq.) CO2-free aqueous solution, which homogenizes at (100-260 degreesC) and characterizes the sulfide fluorite-sericite association in the Correas deposit. The late fluid in the Santa Barbara deposit has lower salinity (0-3 wt.% NaCl eq.) and characterizes the late-barren-quartz, muscovite and kaolinite veins. Oxygen isotope thermometry coupled with fluid inclusion data suggest hydrothermal activity at 240-450 degreesC, and 1,0-2.6 kbar fluid pressure at Correas and Oriente Novo. The hydrogen isotope composition of breccia-greisen, stockwork, and vein fluids (delta(18)O quartz from 9.9parts per thousand to 10.9parts per thousand, deltaDH(2)O from 4.13parts per thousand to 6.95parts per thousand) is consistent with a fluid that was in equilibrium with granite at temperatures from 450 to 240 degreesC. In the Santa Barbara deposit, the inferred temperatures for quartz-pods and bed-like greisens are much higher (570 and 500 degreesC, respectively), and that for the cassiterite-quartz-veins is 415 degreesC. The oxygen and hydrogen isotope composition of greisen and quartz-pods fluids (delta(18)O(qtz-H2O)=5.5-6.1parts per thousand) indicate that the fluid equilibrated with the albite granite, consistent with a magmatic origin. The values for mica (delta(18)O(mica-H2O)=33-9.8parts per thousand) suggest mixing with meteoric water. Late muscovite veins (delta(18)O(qtz-H2O)=-6.4parts per thousand) and late quartz (delta(18)O(mica-H2O)=-3.8parts per thousand) indicate involvement of a meteoric fluid. Overall, the stable isotope and fluid inclusion data imply three fluid types: (1) an early orthomagmatic fluid, which equilibrated with granite; (2) a mixed orthomagmatic-meteoric fluid; and (3) a late hydrothermal meteoric fluid. The first two were responsible for cassiterite, wolframite, and minor coluChange in the redox conditions related to mixing-of magmatic and meteoric fluids favored important sulfide mineralization in the Correas deposit. (C) 2004 Elsevier B.V. All rights reserved.